diff options
Diffstat (limited to 'Documentation/media/uapi/dvb/fe_property_parameters.rst')
| -rw-r--r-- | Documentation/media/uapi/dvb/fe_property_parameters.rst | 1960 |
1 files changed, 0 insertions, 1960 deletions
diff --git a/Documentation/media/uapi/dvb/fe_property_parameters.rst b/Documentation/media/uapi/dvb/fe_property_parameters.rst deleted file mode 100644 index 7bb7559c4500..000000000000 --- a/Documentation/media/uapi/dvb/fe_property_parameters.rst +++ /dev/null @@ -1,1960 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. _fe_property_parameters: - -****************************** -Digital TV property parameters -****************************** - - -.. _DTV-UNDEFINED: - -DTV_UNDEFINED -============= - -Used internally. A GET/SET operation for it won't change or return -anything. - - -.. _DTV-TUNE: - -DTV_TUNE -======== - -Interpret the cache of data, build either a traditional frontend -tunerequest so we can pass validation in the ``FE_SET_FRONTEND`` ioctl. - - -.. _DTV-CLEAR: - -DTV_CLEAR -========= - -Reset a cache of data specific to the frontend here. This does not -effect hardware. - - -.. _DTV-FREQUENCY: - -DTV_FREQUENCY -============= - -Frequency of the digital TV transponder/channel. - -.. note:: - - #. For satellite delivery systems, the frequency is in kHz. - - #. For cable and terrestrial delivery systems, the frequency is in - Hz. - - #. On most delivery systems, the frequency is the center frequency - of the transponder/channel. The exception is for ISDB-T, where - the main carrier has a 1/7 offset from the center. - - #. For ISDB-T, the channels are usually transmitted with an offset of - about 143kHz. E.g. a valid frequency could be 474,143 kHz. The - stepping is bound to the bandwidth of the channel which is - typically 6MHz. - - #. In ISDB-Tsb, the channel consists of only one or three segments the - frequency step is 429kHz, 3*429 respectively. - - -.. _DTV-MODULATION: - -DTV_MODULATION -============== - -Specifies the frontend modulation type for delivery systems that -supports more than one modulation type. The modulation can be one of the -types defined by enum :c:type:`fe_modulation`. - - -.. c:type:: fe_modulation - -Modulation property -------------------- - -Most of the digital TV standards currently offers more than one possible -modulation (sometimes called as "constellation" on some standards). This -enum contains the values used by the Kernel. Please note that not all -modulations are supported by a given standard. - - -.. flat-table:: enum fe_modulation - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _QPSK: - - ``QPSK`` - - - QPSK modulation - - - .. row 3 - - - .. _QAM-16: - - ``QAM_16`` - - - 16-QAM modulation - - - .. row 4 - - - .. _QAM-32: - - ``QAM_32`` - - - 32-QAM modulation - - - .. row 5 - - - .. _QAM-64: - - ``QAM_64`` - - - 64-QAM modulation - - - .. row 6 - - - .. _QAM-128: - - ``QAM_128`` - - - 128-QAM modulation - - - .. row 7 - - - .. _QAM-256: - - ``QAM_256`` - - - 256-QAM modulation - - - .. row 8 - - - .. _QAM-AUTO: - - ``QAM_AUTO`` - - - Autodetect QAM modulation - - - .. row 9 - - - .. _VSB-8: - - ``VSB_8`` - - - 8-VSB modulation - - - .. row 10 - - - .. _VSB-16: - - ``VSB_16`` - - - 16-VSB modulation - - - .. row 11 - - - .. _PSK-8: - - ``PSK_8`` - - - 8-PSK modulation - - - .. row 12 - - - .. _APSK-16: - - ``APSK_16`` - - - 16-APSK modulation - - - .. row 13 - - - .. _APSK-32: - - ``APSK_32`` - - - 32-APSK modulation - - - .. row 14 - - - .. _DQPSK: - - ``DQPSK`` - - - DQPSK modulation - - - .. row 15 - - - .. _QAM-4-NR: - - ``QAM_4_NR`` - - - 4-QAM-NR modulation - - - -.. _DTV-BANDWIDTH-HZ: - -DTV_BANDWIDTH_HZ -================ - -Bandwidth for the channel, in HZ. - -Possible values: ``1712000``, ``5000000``, ``6000000``, ``7000000``, -``8000000``, ``10000000``. - -.. note:: - - #. DVB-T supports 6, 7 and 8MHz. - - #. DVB-T2 supports 1.172, 5, 6, 7, 8 and 10MHz. - - #. ISDB-T supports 5MHz, 6MHz, 7MHz and 8MHz, although most - places use 6MHz. - - #. On DVB-C and DVB-S/S2, the bandwidth depends on the symbol rate. - So, the Kernel will silently ignore setting :ref:`DTV-BANDWIDTH-HZ`. - - #. For DVB-C and DVB-S/S2, the Kernel will return an estimation of the - bandwidth, calculated from :ref:`DTV-SYMBOL-RATE` and from - the rolloff, with is fixed for DVB-C and DVB-S. - - #. For DVB-S2, the bandwidth estimation will use :ref:`DTV-ROLLOFF`. - - #. For ISDB-Tsb, it can vary depending on the number of connected - segments. - - #. Bandwidth in ISDB-Tsb can be easily derived from other parameters - (DTV_ISDBT_SB_SEGMENT_IDX, DTV_ISDBT_SB_SEGMENT_COUNT). - - -.. _DTV-INVERSION: - -DTV_INVERSION -============= - -Specifies if the frontend should do spectral inversion or not. - -.. c:type:: fe_spectral_inversion - -enum fe_modulation: Frontend spectral inversion ------------------------------------------------ - -This parameter indicates if spectral inversion should be presumed or -not. In the automatic setting (``INVERSION_AUTO``) the hardware will try -to figure out the correct setting by itself. If the hardware doesn't -support, the DVB core will try to lock at the carrier first with -inversion off. If it fails, it will try to enable inversion. - - -.. flat-table:: enum fe_modulation - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _INVERSION-OFF: - - ``INVERSION_OFF`` - - - Don't do spectral band inversion. - - - .. row 3 - - - .. _INVERSION-ON: - - ``INVERSION_ON`` - - - Do spectral band inversion. - - - .. row 4 - - - .. _INVERSION-AUTO: - - ``INVERSION_AUTO`` - - - Autodetect spectral band inversion. - - - -.. _DTV-DISEQC-MASTER: - -DTV_DISEQC_MASTER -================= - -Currently not implemented. - - -.. _DTV-SYMBOL-RATE: - -DTV_SYMBOL_RATE -=============== - -Digital TV symbol rate, in bauds (symbols/second). Used on cable -standards. - - -.. _DTV-INNER-FEC: - -DTV_INNER_FEC -============= - -Used cable/satellite transmissions. The acceptable values are: - -.. c:type:: fe_code_rate - -enum fe_code_rate: type of the Forward Error Correction. --------------------------------------------------------- - -.. flat-table:: enum fe_code_rate - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _FEC-NONE: - - ``FEC_NONE`` - - - No Forward Error Correction Code - - - .. row 3 - - - .. _FEC-AUTO: - - ``FEC_AUTO`` - - - Autodetect Error Correction Code - - - .. row 4 - - - .. _FEC-1-2: - - ``FEC_1_2`` - - - Forward Error Correction Code 1/2 - - - .. row 5 - - - .. _FEC-2-3: - - ``FEC_2_3`` - - - Forward Error Correction Code 2/3 - - - .. row 6 - - - .. _FEC-3-4: - - ``FEC_3_4`` - - - Forward Error Correction Code 3/4 - - - .. row 7 - - - .. _FEC-4-5: - - ``FEC_4_5`` - - - Forward Error Correction Code 4/5 - - - .. row 8 - - - .. _FEC-5-6: - - ``FEC_5_6`` - - - Forward Error Correction Code 5/6 - - - .. row 9 - - - .. _FEC-6-7: - - ``FEC_6_7`` - - - Forward Error Correction Code 6/7 - - - .. row 10 - - - .. _FEC-7-8: - - ``FEC_7_8`` - - - Forward Error Correction Code 7/8 - - - .. row 11 - - - .. _FEC-8-9: - - ``FEC_8_9`` - - - Forward Error Correction Code 8/9 - - - .. row 12 - - - .. _FEC-9-10: - - ``FEC_9_10`` - - - Forward Error Correction Code 9/10 - - - .. row 13 - - - .. _FEC-2-5: - - ``FEC_2_5`` - - - Forward Error Correction Code 2/5 - - - .. row 14 - - - .. _FEC-3-5: - - ``FEC_3_5`` - - - Forward Error Correction Code 3/5 - - - -.. _DTV-VOLTAGE: - -DTV_VOLTAGE -=========== - -The voltage is usually used with non-DiSEqC capable LNBs to switch the -polarzation (horizontal/vertical). When using DiSEqC epuipment this -voltage has to be switched consistently to the DiSEqC commands as -described in the DiSEqC spec. - - -.. c:type:: fe_sec_voltage - -.. flat-table:: enum fe_sec_voltage - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _SEC-VOLTAGE-13: - - ``SEC_VOLTAGE_13`` - - - Set DC voltage level to 13V - - - .. row 3 - - - .. _SEC-VOLTAGE-18: - - ``SEC_VOLTAGE_18`` - - - Set DC voltage level to 18V - - - .. row 4 - - - .. _SEC-VOLTAGE-OFF: - - ``SEC_VOLTAGE_OFF`` - - - Don't send any voltage to the antenna - - - -.. _DTV-TONE: - -DTV_TONE -======== - -Currently not used. - - -.. _DTV-PILOT: - -DTV_PILOT -========= - -Sets DVB-S2 pilot - - -.. c:type:: fe_pilot - -fe_pilot type -------------- - - -.. flat-table:: enum fe_pilot - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _PILOT-ON: - - ``PILOT_ON`` - - - Pilot tones enabled - - - .. row 3 - - - .. _PILOT-OFF: - - ``PILOT_OFF`` - - - Pilot tones disabled - - - .. row 4 - - - .. _PILOT-AUTO: - - ``PILOT_AUTO`` - - - Autodetect pilot tones - - - -.. _DTV-ROLLOFF: - -DTV_ROLLOFF -=========== - -Sets DVB-S2 rolloff - - -.. c:type:: fe_rolloff - -fe_rolloff type ---------------- - - -.. flat-table:: enum fe_rolloff - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _ROLLOFF-35: - - ``ROLLOFF_35`` - - - Roloff factor: α=35% - - - .. row 3 - - - .. _ROLLOFF-20: - - ``ROLLOFF_20`` - - - Roloff factor: α=20% - - - .. row 4 - - - .. _ROLLOFF-25: - - ``ROLLOFF_25`` - - - Roloff factor: α=25% - - - .. row 5 - - - .. _ROLLOFF-AUTO: - - ``ROLLOFF_AUTO`` - - - Auto-detect the roloff factor. - - - -.. _DTV-DISEQC-SLAVE-REPLY: - -DTV_DISEQC_SLAVE_REPLY -====================== - -Currently not implemented. - - -.. _DTV-FE-CAPABILITY-COUNT: - -DTV_FE_CAPABILITY_COUNT -======================= - -Currently not implemented. - - -.. _DTV-FE-CAPABILITY: - -DTV_FE_CAPABILITY -================= - -Currently not implemented. - - -.. _DTV-DELIVERY-SYSTEM: - -DTV_DELIVERY_SYSTEM -=================== - -Specifies the type of Delivery system - - -.. c:type:: fe_delivery_system - -fe_delivery_system type ------------------------ - -Possible values: - - -.. flat-table:: enum fe_delivery_system - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _SYS-UNDEFINED: - - ``SYS_UNDEFINED`` - - - Undefined standard. Generally, indicates an error - - - .. row 3 - - - .. _SYS-DVBC-ANNEX-A: - - ``SYS_DVBC_ANNEX_A`` - - - Cable TV: DVB-C following ITU-T J.83 Annex A spec - - - .. row 4 - - - .. _SYS-DVBC-ANNEX-B: - - ``SYS_DVBC_ANNEX_B`` - - - Cable TV: DVB-C following ITU-T J.83 Annex B spec (ClearQAM) - - - .. row 5 - - - .. _SYS-DVBC-ANNEX-C: - - ``SYS_DVBC_ANNEX_C`` - - - Cable TV: DVB-C following ITU-T J.83 Annex C spec - - - .. row 6 - - - .. _SYS-ISDBC: - - ``SYS_ISDBC`` - - - Cable TV: ISDB-C (no drivers yet) - - - .. row 7 - - - .. _SYS-DVBT: - - ``SYS_DVBT`` - - - Terrestral TV: DVB-T - - - .. row 8 - - - .. _SYS-DVBT2: - - ``SYS_DVBT2`` - - - Terrestral TV: DVB-T2 - - - .. row 9 - - - .. _SYS-ISDBT: - - ``SYS_ISDBT`` - - - Terrestral TV: ISDB-T - - - .. row 10 - - - .. _SYS-ATSC: - - ``SYS_ATSC`` - - - Terrestral TV: ATSC - - - .. row 11 - - - .. _SYS-ATSCMH: - - ``SYS_ATSCMH`` - - - Terrestral TV (mobile): ATSC-M/H - - - .. row 12 - - - .. _SYS-DTMB: - - ``SYS_DTMB`` - - - Terrestrial TV: DTMB - - - .. row 13 - - - .. _SYS-DVBS: - - ``SYS_DVBS`` - - - Satellite TV: DVB-S - - - .. row 14 - - - .. _SYS-DVBS2: - - ``SYS_DVBS2`` - - - Satellite TV: DVB-S2 - - - .. row 15 - - - .. _SYS-TURBO: - - ``SYS_TURBO`` - - - Satellite TV: DVB-S Turbo - - - .. row 16 - - - .. _SYS-ISDBS: - - ``SYS_ISDBS`` - - - Satellite TV: ISDB-S - - - .. row 17 - - - .. _SYS-DAB: - - ``SYS_DAB`` - - - Digital audio: DAB (not fully supported) - - - .. row 18 - - - .. _SYS-DSS: - - ``SYS_DSS`` - - - Satellite TV:"DSS (not fully supported) - - - .. row 19 - - - .. _SYS-CMMB: - - ``SYS_CMMB`` - - - Terrestral TV (mobile):CMMB (not fully supported) - - - .. row 20 - - - .. _SYS-DVBH: - - ``SYS_DVBH`` - - - Terrestral TV (mobile): DVB-H (standard deprecated) - - - -.. _DTV-ISDBT-PARTIAL-RECEPTION: - -DTV_ISDBT_PARTIAL_RECEPTION -=========================== - -If ``DTV_ISDBT_SOUND_BROADCASTING`` is '0' this bit-field represents -whether the channel is in partial reception mode or not. - -If '1' ``DTV_ISDBT_LAYERA_*`` values are assigned to the center segment -and ``DTV_ISDBT_LAYERA_SEGMENT_COUNT`` has to be '1'. - -If in addition ``DTV_ISDBT_SOUND_BROADCASTING`` is '1' -``DTV_ISDBT_PARTIAL_RECEPTION`` represents whether this ISDB-Tsb channel -is consisting of one segment and layer or three segments and two layers. - -Possible values: 0, 1, -1 (AUTO) - - -.. _DTV-ISDBT-SOUND-BROADCASTING: - -DTV_ISDBT_SOUND_BROADCASTING -============================ - -This field represents whether the other DTV_ISDBT_*-parameters are -referring to an ISDB-T and an ISDB-Tsb channel. (See also -``DTV_ISDBT_PARTIAL_RECEPTION``). - -Possible values: 0, 1, -1 (AUTO) - - -.. _DTV-ISDBT-SB-SUBCHANNEL-ID: - -DTV_ISDBT_SB_SUBCHANNEL_ID -========================== - -This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'. - -(Note of the author: This might not be the correct description of the -``SUBCHANNEL-ID`` in all details, but it is my understanding of the -technical background needed to program a device) - -An ISDB-Tsb channel (1 or 3 segments) can be broadcasted alone or in a -set of connected ISDB-Tsb channels. In this set of channels every -channel can be received independently. The number of connected ISDB-Tsb -segment can vary, e.g. depending on the frequency spectrum bandwidth -available. - -Example: Assume 8 ISDB-Tsb connected segments are broadcasted. The -broadcaster has several possibilities to put those channels in the air: -Assuming a normal 13-segment ISDB-T spectrum he can align the 8 segments -from position 1-8 to 5-13 or anything in between. - -The underlying layer of segments are subchannels: each segment is -consisting of several subchannels with a predefined IDs. A sub-channel -is used to help the demodulator to synchronize on the channel. - -An ISDB-T channel is always centered over all sub-channels. As for the -example above, in ISDB-Tsb it is no longer as simple as that. - -``The DTV_ISDBT_SB_SUBCHANNEL_ID`` parameter is used to give the -sub-channel ID of the segment to be demodulated. - -Possible values: 0 .. 41, -1 (AUTO) - - -.. _DTV-ISDBT-SB-SEGMENT-IDX: - -DTV_ISDBT_SB_SEGMENT_IDX -======================== - -This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'. - -``DTV_ISDBT_SB_SEGMENT_IDX`` gives the index of the segment to be -demodulated for an ISDB-Tsb channel where several of them are -transmitted in the connected manner. - -Possible values: 0 .. ``DTV_ISDBT_SB_SEGMENT_COUNT`` - 1 - -Note: This value cannot be determined by an automatic channel search. - - -.. _DTV-ISDBT-SB-SEGMENT-COUNT: - -DTV_ISDBT_SB_SEGMENT_COUNT -========================== - -This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'. - -``DTV_ISDBT_SB_SEGMENT_COUNT`` gives the total count of connected -ISDB-Tsb channels. - -Possible values: 1 .. 13 - -Note: This value cannot be determined by an automatic channel search. - - -.. _isdb-hierq-layers: - -DTV-ISDBT-LAYER[A-C] parameters -=============================== - -ISDB-T channels can be coded hierarchically. As opposed to DVB-T in -ISDB-T hierarchical layers can be decoded simultaneously. For that -reason a ISDB-T demodulator has 3 Viterbi and 3 Reed-Solomon decoders. - -ISDB-T has 3 hierarchical layers which each can use a part of the -available segments. The total number of segments over all layers has to -13 in ISDB-T. - -There are 3 parameter sets, for Layers A, B and C. - - -.. _DTV-ISDBT-LAYER-ENABLED: - -DTV_ISDBT_LAYER_ENABLED ------------------------ - -Hierarchical reception in ISDB-T is achieved by enabling or disabling -layers in the decoding process. Setting all bits of -``DTV_ISDBT_LAYER_ENABLED`` to '1' forces all layers (if applicable) to -be demodulated. This is the default. - -If the channel is in the partial reception mode -(``DTV_ISDBT_PARTIAL_RECEPTION`` = 1) the central segment can be decoded -independently of the other 12 segments. In that mode layer A has to have -a ``SEGMENT_COUNT`` of 1. - -In ISDB-Tsb only layer A is used, it can be 1 or 3 in ISDB-Tsb according -to ``DTV_ISDBT_PARTIAL_RECEPTION``. ``SEGMENT_COUNT`` must be filled -accordingly. - -Only the values of the first 3 bits are used. Other bits will be silently ignored: - -``DTV_ISDBT_LAYER_ENABLED`` bit 0: layer A enabled - -``DTV_ISDBT_LAYER_ENABLED`` bit 1: layer B enabled - -``DTV_ISDBT_LAYER_ENABLED`` bit 2: layer C enabled - -``DTV_ISDBT_LAYER_ENABLED`` bits 3-31: unused - - -.. _DTV-ISDBT-LAYER-FEC: - -DTV_ISDBT_LAYER[A-C]_FEC ------------------------- - -Possible values: ``FEC_AUTO``, ``FEC_1_2``, ``FEC_2_3``, ``FEC_3_4``, -``FEC_5_6``, ``FEC_7_8`` - - -.. _DTV-ISDBT-LAYER-MODULATION: - -DTV_ISDBT_LAYER[A-C]_MODULATION -------------------------------- - -Possible values: ``QAM_AUTO``, QP\ ``SK, QAM_16``, ``QAM_64``, ``DQPSK`` - -Note: If layer C is ``DQPSK`` layer B has to be ``DQPSK``. If layer B is -``DQPSK`` and ``DTV_ISDBT_PARTIAL_RECEPTION``\ =0 layer has to be -``DQPSK``. - - -.. _DTV-ISDBT-LAYER-SEGMENT-COUNT: - -DTV_ISDBT_LAYER[A-C]_SEGMENT_COUNT ----------------------------------- - -Possible values: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, -1 (AUTO) - -Note: Truth table for ``DTV_ISDBT_SOUND_BROADCASTING`` and -``DTV_ISDBT_PARTIAL_RECEPTION`` and ``LAYER[A-C]_SEGMENT_COUNT`` - -.. _isdbt-layer_seg-cnt-table: - -.. flat-table:: Truth table for ISDB-T Sound Broadcasting - :header-rows: 0 - :stub-columns: 0 - - - - .. row 1 - - - PR - - - SB - - - Layer A width - - - Layer B width - - - Layer C width - - - total width - - - .. row 2 - - - 0 - - - 0 - - - 1 .. 13 - - - 1 .. 13 - - - 1 .. 13 - - - 13 - - - .. row 3 - - - 1 - - - 0 - - - 1 - - - 1 .. 13 - - - 1 .. 13 - - - 13 - - - .. row 4 - - - 0 - - - 1 - - - 1 - - - 0 - - - 0 - - - 1 - - - .. row 5 - - - 1 - - - 1 - - - 1 - - - 2 - - - 0 - - - 13 - - - -.. _DTV-ISDBT-LAYER-TIME-INTERLEAVING: - -DTV_ISDBT_LAYER[A-C]_TIME_INTERLEAVING --------------------------------------- - -Valid values: 0, 1, 2, 4, -1 (AUTO) - -when DTV_ISDBT_SOUND_BROADCASTING is active, value 8 is also valid. - -Note: The real time interleaving length depends on the mode (fft-size). -The values here are referring to what can be found in the -TMCC-structure, as shown in the table below. - - -.. c:type:: isdbt_layer_interleaving_table - -.. flat-table:: ISDB-T time interleaving modes - :header-rows: 0 - :stub-columns: 0 - - - - .. row 1 - - - ``DTV_ISDBT_LAYER[A-C]_TIME_INTERLEAVING`` - - - Mode 1 (2K FFT) - - - Mode 2 (4K FFT) - - - Mode 3 (8K FFT) - - - .. row 2 - - - 0 - - - 0 - - - 0 - - - 0 - - - .. row 3 - - - 1 - - - 4 - - - 2 - - - 1 - - - .. row 4 - - - 2 - - - 8 - - - 4 - - - 2 - - - .. row 5 - - - 4 - - - 16 - - - 8 - - - 4 - - - -.. _DTV-ATSCMH-FIC-VER: - -DTV_ATSCMH_FIC_VER ------------------- - -Version number of the FIC (Fast Information Channel) signaling data. - -FIC is used for relaying information to allow rapid service acquisition -by the receiver. - -Possible values: 0, 1, 2, 3, ..., 30, 31 - - -.. _DTV-ATSCMH-PARADE-ID: - -DTV_ATSCMH_PARADE_ID --------------------- - -Parade identification number - -A parade is a collection of up to eight MH groups, conveying one or two -ensembles. - -Possible values: 0, 1, 2, 3, ..., 126, 127 - - -.. _DTV-ATSCMH-NOG: - -DTV_ATSCMH_NOG --------------- - -Number of MH groups per MH subframe for a designated parade. - -Possible values: 1, 2, 3, 4, 5, 6, 7, 8 - - -.. _DTV-ATSCMH-TNOG: - -DTV_ATSCMH_TNOG ---------------- - -Total number of MH groups including all MH groups belonging to all MH -parades in one MH subframe. - -Possible values: 0, 1, 2, 3, ..., 30, 31 - - -.. _DTV-ATSCMH-SGN: - -DTV_ATSCMH_SGN --------------- - -Start group number. - -Possible values: 0, 1, 2, 3, ..., 14, 15 - - -.. _DTV-ATSCMH-PRC: - -DTV_ATSCMH_PRC --------------- - -Parade repetition cycle. - -Possible values: 1, 2, 3, 4, 5, 6, 7, 8 - - -.. _DTV-ATSCMH-RS-FRAME-MODE: - -DTV_ATSCMH_RS_FRAME_MODE ------------------------- - -Reed Solomon (RS) frame mode. - -Possible values are: - -.. tabularcolumns:: |p{5.0cm}|p{12.5cm}| - -.. c:type:: atscmh_rs_frame_mode - -.. flat-table:: enum atscmh_rs_frame_mode - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _ATSCMH-RSFRAME-PRI-ONLY: - - ``ATSCMH_RSFRAME_PRI_ONLY`` - - - Single Frame: There is only a primary RS Frame for all Group - Regions. - - - .. row 3 - - - .. _ATSCMH-RSFRAME-PRI-SEC: - - ``ATSCMH_RSFRAME_PRI_SEC`` - - - Dual Frame: There are two separate RS Frames: Primary RS Frame for - Group Region A and B and Secondary RS Frame for Group Region C and - D. - - - -.. _DTV-ATSCMH-RS-FRAME-ENSEMBLE: - -DTV_ATSCMH_RS_FRAME_ENSEMBLE ----------------------------- - -Reed Solomon(RS) frame ensemble. - -Possible values are: - - -.. c:type:: atscmh_rs_frame_ensemble - -.. flat-table:: enum atscmh_rs_frame_ensemble - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _ATSCMH-RSFRAME-ENS-PRI: - - ``ATSCMH_RSFRAME_ENS_PRI`` - - - Primary Ensemble. - - - .. row 3 - - - .. _ATSCMH-RSFRAME-ENS-SEC: - - ``AATSCMH_RSFRAME_PRI_SEC`` - - - Secondary Ensemble. - - - .. row 4 - - - .. _ATSCMH-RSFRAME-RES: - - ``AATSCMH_RSFRAME_RES`` - - - Reserved. Shouldn't be used. - - - -.. _DTV-ATSCMH-RS-CODE-MODE-PRI: - -DTV_ATSCMH_RS_CODE_MODE_PRI ---------------------------- - -Reed Solomon (RS) code mode (primary). - -Possible values are: - - -.. c:type:: atscmh_rs_code_mode - -.. flat-table:: enum atscmh_rs_code_mode - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _ATSCMH-RSCODE-211-187: - - ``ATSCMH_RSCODE_211_187`` - - - Reed Solomon code (211,187). - - - .. row 3 - - - .. _ATSCMH-RSCODE-223-187: - - ``ATSCMH_RSCODE_223_187`` - - - Reed Solomon code (223,187). - - - .. row 4 - - - .. _ATSCMH-RSCODE-235-187: - - ``ATSCMH_RSCODE_235_187`` - - - Reed Solomon code (235,187). - - - .. row 5 - - - .. _ATSCMH-RSCODE-RES: - - ``ATSCMH_RSCODE_RES`` - - - Reserved. Shouldn't be used. - - - -.. _DTV-ATSCMH-RS-CODE-MODE-SEC: - -DTV_ATSCMH_RS_CODE_MODE_SEC ---------------------------- - -Reed Solomon (RS) code mode (secondary). - -Possible values are the same as documented on enum -:c:type:`atscmh_rs_code_mode`: - - -.. _DTV-ATSCMH-SCCC-BLOCK-MODE: - -DTV_ATSCMH_SCCC_BLOCK_MODE --------------------------- - -Series Concatenated Convolutional Code Block Mode. - -Possible values are: - -.. tabularcolumns:: |p{4.5cm}|p{13.0cm}| - -.. c:type:: atscmh_sccc_block_mode - -.. flat-table:: enum atscmh_scc_block_mode - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _ATSCMH-SCCC-BLK-SEP: - - ``ATSCMH_SCCC_BLK_SEP`` - - - Separate SCCC: the SCCC outer code mode shall be set independently - for each Group Region (A, B, C, D) - - - .. row 3 - - - .. _ATSCMH-SCCC-BLK-COMB: - - ``ATSCMH_SCCC_BLK_COMB`` - - - Combined SCCC: all four Regions shall have the same SCCC outer - code mode. - - - .. row 4 - - - .. _ATSCMH-SCCC-BLK-RES: - - ``ATSCMH_SCCC_BLK_RES`` - - - Reserved. Shouldn't be used. - - - -.. _DTV-ATSCMH-SCCC-CODE-MODE-A: - -DTV_ATSCMH_SCCC_CODE_MODE_A ---------------------------- - -Series Concatenated Convolutional Code Rate. - -Possible values are: - - -.. c:type:: atscmh_sccc_code_mode - -.. flat-table:: enum atscmh_sccc_code_mode - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _ATSCMH-SCCC-CODE-HLF: - - ``ATSCMH_SCCC_CODE_HLF`` - - - The outer code rate of a SCCC Block is 1/2 rate. - - - .. row 3 - - - .. _ATSCMH-SCCC-CODE-QTR: - - ``ATSCMH_SCCC_CODE_QTR`` - - - The outer code rate of a SCCC Block is 1/4 rate. - - - .. row 4 - - - .. _ATSCMH-SCCC-CODE-RES: - - ``ATSCMH_SCCC_CODE_RES`` - - - to be documented. - - - -.. _DTV-ATSCMH-SCCC-CODE-MODE-B: - -DTV_ATSCMH_SCCC_CODE_MODE_B ---------------------------- - -Series Concatenated Convolutional Code Rate. - -Possible values are the same as documented on enum -:c:type:`atscmh_sccc_code_mode`. - - -.. _DTV-ATSCMH-SCCC-CODE-MODE-C: - -DTV_ATSCMH_SCCC_CODE_MODE_C ---------------------------- - -Series Concatenated Convolutional Code Rate. - -Possible values are the same as documented on enum -:c:type:`atscmh_sccc_code_mode`. - - -.. _DTV-ATSCMH-SCCC-CODE-MODE-D: - -DTV_ATSCMH_SCCC_CODE_MODE_D ---------------------------- - -Series Concatenated Convolutional Code Rate. - -Possible values are the same as documented on enum -:c:type:`atscmh_sccc_code_mode`. - - -.. _DTV-API-VERSION: - -DTV_API_VERSION -=============== - -Returns the major/minor version of the DVB API - - -.. _DTV-CODE-RATE-HP: - -DTV_CODE_RATE_HP -================ - -Used on terrestrial transmissions. The acceptable values are the ones -described at :c:type:`fe_transmit_mode`. - - -.. _DTV-CODE-RATE-LP: - -DTV_CODE_RATE_LP -================ - -Used on terrestrial transmissions. The acceptable values are the ones -described at :c:type:`fe_transmit_mode`. - - -.. _DTV-GUARD-INTERVAL: - -DTV_GUARD_INTERVAL -================== - -Possible values are: - - -.. c:type:: fe_guard_interval - -Modulation guard interval -------------------------- - - -.. flat-table:: enum fe_guard_interval - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _GUARD-INTERVAL-AUTO: - - ``GUARD_INTERVAL_AUTO`` - - - Autodetect the guard interval - - - .. row 3 - - - .. _GUARD-INTERVAL-1-128: - - ``GUARD_INTERVAL_1_128`` - - - Guard interval 1/128 - - - .. row 4 - - - .. _GUARD-INTERVAL-1-32: - - ``GUARD_INTERVAL_1_32`` - - - Guard interval 1/32 - - - .. row 5 - - - .. _GUARD-INTERVAL-1-16: - - ``GUARD_INTERVAL_1_16`` - - - Guard interval 1/16 - - - .. row 6 - - - .. _GUARD-INTERVAL-1-8: - - ``GUARD_INTERVAL_1_8`` - - - Guard interval 1/8 - - - .. row 7 - - - .. _GUARD-INTERVAL-1-4: - - ``GUARD_INTERVAL_1_4`` - - - Guard interval 1/4 - - - .. row 8 - - - .. _GUARD-INTERVAL-19-128: - - ``GUARD_INTERVAL_19_128`` - - - Guard interval 19/128 - - - .. row 9 - - - .. _GUARD-INTERVAL-19-256: - - ``GUARD_INTERVAL_19_256`` - - - Guard interval 19/256 - - - .. row 10 - - - .. _GUARD-INTERVAL-PN420: - - ``GUARD_INTERVAL_PN420`` - - - PN length 420 (1/4) - - - .. row 11 - - - .. _GUARD-INTERVAL-PN595: - - ``GUARD_INTERVAL_PN595`` - - - PN length 595 (1/6) - - - .. row 12 - - - .. _GUARD-INTERVAL-PN945: - - ``GUARD_INTERVAL_PN945`` - - - PN length 945 (1/9) - - -Notes: - -1) If ``DTV_GUARD_INTERVAL`` is set the ``GUARD_INTERVAL_AUTO`` the -hardware will try to find the correct guard interval (if capable) and -will use TMCC to fill in the missing parameters. - -2) Intervals 1/128, 19/128 and 19/256 are used only for DVB-T2 at -present - -3) DTMB specifies PN420, PN595 and PN945. - - -.. _DTV-TRANSMISSION-MODE: - -DTV_TRANSMISSION_MODE -===================== - -Specifies the number of carriers used by the standard. This is used only -on OFTM-based standards, e. g. DVB-T/T2, ISDB-T, DTMB - - -.. c:type:: fe_transmit_mode - -enum fe_transmit_mode: Number of carriers per channel ------------------------------------------------------ - -.. tabularcolumns:: |p{5.0cm}|p{12.5cm}| - -.. flat-table:: enum fe_transmit_mode - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _TRANSMISSION-MODE-AUTO: - - ``TRANSMISSION_MODE_AUTO`` - - - Autodetect transmission mode. The hardware will try to find the - correct FFT-size (if capable) to fill in the missing parameters. - - - .. row 3 - - - .. _TRANSMISSION-MODE-1K: - - ``TRANSMISSION_MODE_1K`` - - - Transmission mode 1K - - - .. row 4 - - - .. _TRANSMISSION-MODE-2K: - - ``TRANSMISSION_MODE_2K`` - - - Transmission mode 2K - - - .. row 5 - - - .. _TRANSMISSION-MODE-8K: - - ``TRANSMISSION_MODE_8K`` - - - Transmission mode 8K - - - .. row 6 - - - .. _TRANSMISSION-MODE-4K: - - ``TRANSMISSION_MODE_4K`` - - - Transmission mode 4K - - - .. row 7 - - - .. _TRANSMISSION-MODE-16K: - - ``TRANSMISSION_MODE_16K`` - - - Transmission mode 16K - - - .. row 8 - - - .. _TRANSMISSION-MODE-32K: - - ``TRANSMISSION_MODE_32K`` - - - Transmission mode 32K - - - .. row 9 - - - .. _TRANSMISSION-MODE-C1: - - ``TRANSMISSION_MODE_C1`` - - - Single Carrier (C=1) transmission mode (DTMB) - - - .. row 10 - - - .. _TRANSMISSION-MODE-C3780: - - ``TRANSMISSION_MODE_C3780`` - - - Multi Carrier (C=3780) transmission mode (DTMB) - - -Notes: - -1) ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K. It is called -'mode' in the standard: Mode 1 is 2K, mode 2 is 4K, mode 3 is 8K - -2) If ``DTV_TRANSMISSION_MODE`` is set the ``TRANSMISSION_MODE_AUTO`` -the hardware will try to find the correct FFT-size (if capable) and will -use TMCC to fill in the missing parameters. - -3) DVB-T specifies 2K and 8K as valid sizes. - -4) DVB-T2 specifies 1K, 2K, 4K, 8K, 16K and 32K. - -5) DTMB specifies C1 and C3780. - - -.. _DTV-HIERARCHY: - -DTV_HIERARCHY -============= - -Frontend hierarchy - - -.. c:type:: fe_hierarchy - -Frontend hierarchy ------------------- - - -.. flat-table:: enum fe_hierarchy - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _HIERARCHY-NONE: - - ``HIERARCHY_NONE`` - - - No hierarchy - - - .. row 3 - - - .. _HIERARCHY-AUTO: - - ``HIERARCHY_AUTO`` - - - Autodetect hierarchy (if supported) - - - .. row 4 - - - .. _HIERARCHY-1: - - ``HIERARCHY_1`` - - - Hierarchy 1 - - - .. row 5 - - - .. _HIERARCHY-2: - - ``HIERARCHY_2`` - - - Hierarchy 2 - - - .. row 6 - - - .. _HIERARCHY-4: - - ``HIERARCHY_4`` - - - Hierarchy 4 - - - -.. _DTV-STREAM-ID: - -DTV_STREAM_ID -============= - -DVB-S2, DVB-T2 and ISDB-S support the transmission of several streams on -a single transport stream. This property enables the DVB driver to -handle substream filtering, when supported by the hardware. By default, -substream filtering is disabled. - -For DVB-S2 and DVB-T2, the valid substream id range is from 0 to 255. - -For ISDB, the valid substream id range is from 1 to 65535. - -To disable it, you should use the special macro NO_STREAM_ID_FILTER. - -Note: any value outside the id range also disables filtering. - - -.. _DTV-DVBT2-PLP-ID-LEGACY: - -DTV_DVBT2_PLP_ID_LEGACY -======================= - -Obsolete, replaced with DTV_STREAM_ID. - - -.. _DTV-ENUM-DELSYS: - -DTV_ENUM_DELSYS -=============== - -A Multi standard frontend needs to advertise the delivery systems -provided. Applications need to enumerate the provided delivery systems, -before using any other operation with the frontend. Prior to it's -introduction, FE_GET_INFO was used to determine a frontend type. A -frontend which provides more than a single delivery system, -FE_GET_INFO doesn't help much. Applications which intends to use a -multistandard frontend must enumerate the delivery systems associated -with it, rather than trying to use FE_GET_INFO. In the case of a -legacy frontend, the result is just the same as with FE_GET_INFO, but -in a more structured format - - -.. _DTV-INTERLEAVING: - -DTV_INTERLEAVING -================ - -Time interleaving to be used. Currently, used only on DTMB. - - -.. c:type:: fe_interleaving - -.. flat-table:: enum fe_interleaving - :header-rows: 1 - :stub-columns: 0 - - - - .. row 1 - - - ID - - - Description - - - .. row 2 - - - .. _INTERLEAVING-NONE: - - ``INTERLEAVING_NONE`` - - - No interleaving. - - - .. row 3 - - - .. _INTERLEAVING-AUTO: - - ``INTERLEAVING_AUTO`` - - - Auto-detect interleaving. - - - .. row 4 - - - .. _INTERLEAVING-240: - - ``INTERLEAVING_240`` - - - Interleaving of 240 symbols. - - - .. row 5 - - - .. _INTERLEAVING-720: - - ``INTERLEAVING_720`` - - - Interleaving of 720 symbols. - - - -.. _DTV-LNA: - -DTV_LNA -======= - -Low-noise amplifier. - -Hardware might offer controllable LNA which can be set manually using -that parameter. Usually LNA could be found only from terrestrial devices -if at all. - -Possible values: 0, 1, LNA_AUTO - -0, LNA off - -1, LNA on - -use the special macro LNA_AUTO to set LNA auto |