summaryrefslogtreecommitdiff
path: root/Documentation/networking/device_drivers/ethernet/intel/i40e.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/networking/device_drivers/ethernet/intel/i40e.rst')
-rw-r--r--Documentation/networking/device_drivers/ethernet/intel/i40e.rst23
1 files changed, 15 insertions, 8 deletions
diff --git a/Documentation/networking/device_drivers/ethernet/intel/i40e.rst b/Documentation/networking/device_drivers/ethernet/intel/i40e.rst
index ac35bd472bdc..53d9d5829d69 100644
--- a/Documentation/networking/device_drivers/ethernet/intel/i40e.rst
+++ b/Documentation/networking/device_drivers/ethernet/intel/i40e.rst
@@ -299,6 +299,18 @@ Use ethtool to view and set link-down-on-close, as follows::
ethtool --show-priv-flags ethX
ethtool --set-priv-flags ethX link-down-on-close [on|off]
+Setting the mdd-auto-reset-vf Private Flag
+------------------------------------------
+
+When the mdd-auto-reset-vf private flag is set to "on", the problematic VF will
+be automatically reset if a malformed descriptor is detected. If the flag is
+set to "off", the problematic VF will be disabled.
+
+Use ethtool to view and set mdd-auto-reset-vf, as follows::
+
+ ethtool --show-priv-flags ethX
+ ethtool --set-priv-flags ethX mdd-auto-reset-vf [on|off]
+
Viewing Link Messages
---------------------
Link messages will not be displayed to the console if the distribution is
@@ -399,8 +411,8 @@ operate only in full duplex and only at their native speed.
NAPI
----
NAPI (Rx polling mode) is supported in the i40e driver.
-For more information on NAPI, see
-https://wiki.linuxfoundation.org/networking/napi
+
+See :ref:`Documentation/networking/napi.rst <napi>` for more information.
Flow Control
------------
@@ -759,13 +771,8 @@ enabled when setting up DCB on your switch.
Support
=======
For general information, go to the Intel support website at:
-
https://www.intel.com/support/
-or the Intel Wired Networking project hosted by Sourceforge at:
-
-https://sourceforge.net/projects/e1000
-
If an issue is identified with the released source code on a supported kernel
with a supported adapter, email the specific information related to the issue
-to e1000-devel@lists.sf.net.
+to intel-wired-lan@lists.osuosl.org.