1 files changed, 79 insertions, 0 deletions
diff --git a/Documentation/networking/devlink/octeontx2.rst b/Documentation/networking/devlink/octeontx2.rst
new file mode 100644
index 000000000000..84206537aedb
--- /dev/null
+++ b/Documentation/networking/devlink/octeontx2.rst
@@ -0,0 +1,79 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
+octeontx2 devlink support
+=========================
+
+This document describes the devlink features implemented by the ``octeontx2 AF, PF and VF``
+device drivers.
+
+Parameters
+==========
+
+The ``octeontx2 PF and VF`` drivers implement the following driver-specific parameters.
+
+.. list-table:: Driver-specific parameters implemented
+   :widths: 5 5 5 85
+
+   * - Name
+     - Type
+     - Mode
+     - Description
+   * - ``mcam_count``
+     - u16
+     - runtime
+     - Select number of match CAM entries to be allocated for an interface.
+       The same is used for ntuple filters of the interface. Supported by
+       PF and VF drivers.
+
+The ``octeontx2 AF`` driver implements the following driver-specific parameters.
+
+.. list-table:: Driver-specific parameters implemented
+   :widths: 5 5 5 85
+
+   * - Name
+     - Type
+     - Mode
+     - Description
+   * - ``dwrr_mtu``
+     - u32
+     - runtime
+     - Use to set the quantum which hardware uses for scheduling among transmit queues.
+       Hardware uses weighted DWRR algorithm to schedule among all transmit queues.
+   * - ``npc_mcam_high_zone_percent``
+     - u8
+     - runtime
+     - Use to set the number of high priority zone entries in NPC MCAM that can be allocated
+       by a user, out of the three priority zone categories high, mid and low.
+   * - ``npc_def_rule_cntr``
+     - bool
+     - runtime
+     - Use to enable or disable hit counters for the default rules in NPC MCAM.
+       Its not guaranteed that counters gets enabled and mapped to all the default rules,
+       since the counters are scarce and driver follows a best effort approach.
+       The default rule serves as the primary packet steering rule for a specific PF or VF,
+       based on its DMAC address which is installed by AF driver as part of its initialization.
+       Sample command to read hit counters for default rule from debugfs is as follows,
+       cat /sys/kernel/debug/cn10k/npc/mcam_rules
+   * - ``nix_maxlf``
+     - u16
+     - runtime
+     - Use to set the maximum number of LFs in NIX hardware block. This would be useful
+       to increase the availability of default resources allocated to enabled LFs like
+       MCAM entries for example.
+
+The ``octeontx2 PF`` driver implements the following driver-specific parameters.
+
+.. list-table:: Driver-specific parameters implemented
+   :widths: 5 5 5 85
+
+   * - Name
+     - Type
+     - Mode
+     - Description
+   * - ``unicast_filter_count``
+     - u8
+     - runtime
+     - Set the maximum number of unicast filters that can be programmed for
+       the device. This can be used to achieve better device resource
+       utilization, avoiding over consumption of unused MCAM table entries.