diff options
Diffstat (limited to 'Documentation/process')
| -rw-r--r-- | Documentation/process/changes.rst | 4 | ||||
| -rw-r--r-- | Documentation/process/coding-style.rst | 13 | ||||
| -rw-r--r-- | Documentation/process/embargoed-hardware-issues.rst | 2 | ||||
| -rw-r--r-- | Documentation/process/howto.rst | 4 | ||||
| -rw-r--r-- | Documentation/process/researcher-guidelines.rst | 2 | ||||
| -rw-r--r-- | Documentation/process/submit-checklist.rst | 161 |
6 files changed, 100 insertions, 86 deletions
diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst index c78ecc1e176f..ca611c9c2d1e 100644 --- a/Documentation/process/changes.rst +++ b/Documentation/process/changes.rst @@ -144,8 +144,8 @@ Bison Since Linux 4.16, the build system generates parsers during build. This requires bison 2.0 or later. -pahole: -------- +pahole +------ Since Linux 5.2, if CONFIG_DEBUG_INFO_BTF is selected, the build system generates BTF (BPF Type Format) from DWARF in vmlinux, a bit later from kernel diff --git a/Documentation/process/coding-style.rst b/Documentation/process/coding-style.rst index c48382c6b477..9c7cf7347394 100644 --- a/Documentation/process/coding-style.rst +++ b/Documentation/process/coding-style.rst @@ -203,7 +203,7 @@ Do not unnecessarily use braces where a single statement will do. and -.. code-block:: none +.. code-block:: c if (condition) do_this(); @@ -586,9 +586,9 @@ fix for this is to split it up into two error labels ``err_free_bar:`` and .. code-block:: c - err_free_bar: + err_free_bar: kfree(foo->bar); - err_free_foo: + err_free_foo: kfree(foo); return ret; @@ -660,7 +660,7 @@ make a good program). So, you can either get rid of GNU emacs, or change it to use saner values. To do the latter, you can stick the following in your .emacs file: -.. code-block:: none +.. code-block:: elisp (defun c-lineup-arglist-tabs-only (ignored) "Line up argument lists by tabs, not spaces" @@ -679,7 +679,7 @@ values. To do the latter, you can stick the following in your .emacs file: (c-offsets-alist . ( (arglist-close . c-lineup-arglist-tabs-only) (arglist-cont-nonempty . - (c-lineup-gcc-asm-reg c-lineup-arglist-tabs-only)) + (c-lineup-gcc-asm-reg c-lineup-arglist-tabs-only)) (arglist-intro . +) (brace-list-intro . +) (c . c-lineup-C-comments) @@ -899,7 +899,8 @@ which you should use to make sure messages are matched to the right device and driver, and are tagged with the right level: dev_err(), dev_warn(), dev_info(), and so forth. For messages that aren't associated with a particular device, <linux/printk.h> defines pr_notice(), pr_info(), -pr_warn(), pr_err(), etc. +pr_warn(), pr_err(), etc. When drivers are working properly they are quiet, +so prefer to use dev_dbg/pr_debug unless something is wrong. Coming up with good debugging messages can be quite a challenge; and once you have them, they can be a huge help for remote troubleshooting. However diff --git a/Documentation/process/embargoed-hardware-issues.rst b/Documentation/process/embargoed-hardware-issues.rst index 31000f075707..bb2100228cc7 100644 --- a/Documentation/process/embargoed-hardware-issues.rst +++ b/Documentation/process/embargoed-hardware-issues.rst @@ -255,7 +255,7 @@ an involved disclosed party. The current ambassadors list: IBM Power Anton Blanchard <anton@linux.ibm.com> IBM Z Christian Borntraeger <borntraeger@de.ibm.com> Intel Tony Luck <tony.luck@intel.com> - Qualcomm Trilok Soni <tsoni@codeaurora.org> + Qualcomm Trilok Soni <quic_tsoni@quicinc.com> RISC-V Palmer Dabbelt <palmer@dabbelt.com> Samsung Javier González <javier.gonz@samsung.com> diff --git a/Documentation/process/howto.rst b/Documentation/process/howto.rst index 6c73889c98fc..eebda4910a88 100644 --- a/Documentation/process/howto.rst +++ b/Documentation/process/howto.rst @@ -351,8 +351,8 @@ Managing bug reports -------------------- One of the best ways to put into practice your hacking skills is by fixing -bugs reported by other people. Not only you will help to make the kernel -more stable, but you'll also learn to fix real world problems and you will +bugs reported by other people. Not only will you help to make the kernel +more stable, but you'll also learn to fix real-world problems and you will improve your skills, and other developers will be aware of your presence. Fixing bugs is one of the best ways to get merits among other developers, because not many people like wasting time fixing other people's bugs. diff --git a/Documentation/process/researcher-guidelines.rst b/Documentation/process/researcher-guidelines.rst index d159cd4f5e5b..beb484c5965d 100644 --- a/Documentation/process/researcher-guidelines.rst +++ b/Documentation/process/researcher-guidelines.rst @@ -167,4 +167,4 @@ If no one can be found to internally review patches and you need help finding such a person, or if you have any other questions related to this document and the developer community's expectations, please reach out to the private Technical Advisory Board mailing list: -<tech-board@lists.linux-foundation.org>. +<tech-board@groups.linuxfoundation.org>. diff --git a/Documentation/process/submit-checklist.rst b/Documentation/process/submit-checklist.rst index b1bc2d37bd0a..e531dd504b6c 100644 --- a/Documentation/process/submit-checklist.rst +++ b/Documentation/process/submit-checklist.rst @@ -1,7 +1,8 @@ .. _submitchecklist: +======================================= Linux Kernel patch submission checklist -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +======================================= Here are some basic things that developers should do if they want to see their kernel patch submissions accepted more quickly. @@ -10,111 +11,123 @@ These are all above and beyond the documentation that is provided in :ref:`Documentation/process/submitting-patches.rst <submittingpatches>` and elsewhere regarding submitting Linux kernel patches. +Review your code +================ 1) If you use a facility then #include the file that defines/declares that facility. Don't depend on other header files pulling in ones that you use. -2) Builds cleanly: +2) Check your patch for general style as detailed in + :ref:`Documentation/process/coding-style.rst <codingstyle>`. - a) with applicable or modified ``CONFIG`` options ``=y``, ``=m``, and - ``=n``. No ``gcc`` warnings/errors, no linker warnings/errors. +3) All memory barriers {e.g., ``barrier()``, ``rmb()``, ``wmb()``} need a + comment in the source code that explains the logic of what they are doing + and why. - b) Passes ``allnoconfig``, ``allmodconfig`` +Review Kconfig changes +====================== - c) Builds successfully when using ``O=builddir`` +1) Any new or modified ``CONFIG`` options do not muck up the config menu and + default to off unless they meet the exception criteria documented in + ``Documentation/kbuild/kconfig-language.rst`` Menu attributes: default value. - d) Any Documentation/ changes build successfully without new warnings/errors. - Use ``make htmldocs`` or ``make pdfdocs`` to check the build and - fix any issues. +2) All new ``Kconfig`` options have help text. -3) Builds on multiple CPU architectures by using local cross-compile tools - or some other build farm. +3) Has been carefully reviewed with respect to relevant ``Kconfig`` + combinations. This is very hard to get right with testing---brainpower + pays off here. -4) ppc64 is a good architecture for cross-compilation checking because it - tends to use ``unsigned long`` for 64-bit quantities. +Provide documentation +===================== -5) Check your patch for general style as detailed in - :ref:`Documentation/process/coding-style.rst <codingstyle>`. - Check for trivial violations with the patch style checker prior to - submission (``scripts/checkpatch.pl``). - You should be able to justify all violations that remain in - your patch. +1) Include :ref:`kernel-doc <kernel_doc>` to document global kernel APIs. + (Not required for static functions, but OK there also.) -6) Any new or modified ``CONFIG`` options do not muck up the config menu and - default to off unless they meet the exception criteria documented in - ``Documentation/kbuild/kconfig-language.rst`` Menu attributes: default value. +2) All new ``/proc`` entries are documented under ``Documentation/`` -7) All new ``Kconfig`` options have help text. +3) All new kernel boot parameters are documented in + ``Documentation/admin-guide/kernel-parameters.rst``. -8) Has been carefully reviewed with respect to relevant ``Kconfig`` - combinations. This is very hard to get right with testing -- brainpower - pays off here. +4) All new module parameters are documented with ``MODULE_PARM_DESC()`` -9) Check cleanly with sparse. +5) All new userspace interfaces are documented in ``Documentation/ABI/``. + See ``Documentation/ABI/README`` for more information. + Patches that change userspace interfaces should be CCed to + linux-api@vger.kernel.org. -10) Use ``make checkstack`` and fix any problems that it finds. +6) If any ioctl's are added by the patch, then also update + ``Documentation/userspace-api/ioctl/ioctl-number.rst``. - .. note:: +Check your code with tools +========================== - ``checkstack`` does not point out problems explicitly, - but any one function that uses more than 512 bytes on the stack is a - candidate for change. +1) Check for trivial violations with the patch style checker prior to + submission (``scripts/checkpatch.pl``). + You should be able to justify all violations that remain in + your patch. -11) Include :ref:`kernel-doc <kernel_doc>` to document global kernel APIs. - (Not required for static functions, but OK there also.) Use - ``make htmldocs`` or ``make pdfdocs`` to check the - :ref:`kernel-doc <kernel_doc>` and fix any issues. +2) Check cleanly with sparse. -12) Has been tested with ``CONFIG_PREEMPT``, ``CONFIG_DEBUG_PREEMPT``, - ``CONFIG_DEBUG_SLAB``, ``CONFIG_DEBUG_PAGEALLOC``, ``CONFIG_DEBUG_MUTEXES``, - ``CONFIG_DEBUG_SPINLOCK``, ``CONFIG_DEBUG_ATOMIC_SLEEP``, - ``CONFIG_PROVE_RCU`` and ``CONFIG_DEBUG_OBJECTS_RCU_HEAD`` all - simultaneously enabled. +3) Use ``make checkstack`` and fix any problems that it finds. + Note that ``checkstack`` does not point out problems explicitly, + but any one function that uses more than 512 bytes on the stack is a + candidate for change. -13) Has been build- and runtime tested with and without ``CONFIG_SMP`` and - ``CONFIG_PREEMPT.`` +Build your code +=============== -14) All codepaths have been exercised with all lockdep features enabled. +1) Builds cleanly: -15) All new ``/proc`` entries are documented under ``Documentation/`` + a) with applicable or modified ``CONFIG`` options ``=y``, ``=m``, and + ``=n``. No ``gcc`` warnings/errors, no linker warnings/errors. -16) All new kernel boot parameters are documented in - ``Documentation/admin-guide/kernel-parameters.rst``. + b) Passes ``allnoconfig``, ``allmodconfig`` + + c) Builds successfully when using ``O=builddir`` + + d) Any Documentation/ changes build successfully without new warnings/errors. + Use ``make htmldocs`` or ``make pdfdocs`` to check the build and + fix any issues. -17) All new module parameters are documented with ``MODULE_PARM_DESC()`` +2) Builds on multiple CPU architectures by using local cross-compile tools + or some other build farm. Note that ppc64 is a good architecture for + cross-compilation checking because it tends to use ``unsigned long`` for + 64-bit quantities. -18) All new userspace interfaces are documented in ``Documentation/ABI/``. - See ``Documentation/ABI/README`` for more information. - Patches that change userspace interfaces should be CCed to - linux-api@vger.kernel.org. +3) Newly-added code has been compiled with ``gcc -W`` (use + ``make KCFLAGS=-W``). This will generate lots of noise, but is good + for finding bugs like "warning: comparison between signed and unsigned". -19) Has been checked with injection of at least slab and page-allocation - failures. See ``Documentation/fault-injection/``. +4) If your modified source code depends on or uses any of the kernel + APIs or features that are related to the following ``Kconfig`` symbols, + then test multiple builds with the related ``Kconfig`` symbols disabled + and/or ``=m`` (if that option is available) [not all of these at the + same time, just various/random combinations of them]: - If the new code is substantial, addition of subsystem-specific fault - injection might be appropriate. + ``CONFIG_SMP``, ``CONFIG_SYSFS``, ``CONFIG_PROC_FS``, ``CONFIG_INPUT``, + ``CONFIG_PCI``, ``CONFIG_BLOCK``, ``CONFIG_PM``, ``CONFIG_MAGIC_SYSRQ``, + ``CONFIG_NET``, ``CONFIG_INET=n`` (but latter with ``CONFIG_NET=y``). -20) Newly-added code has been compiled with ``gcc -W`` (use - ``make KCFLAGS=-W``). This will generate lots of noise, but is good - for finding bugs like "warning: comparison between signed and unsigned". +Test your code +============== -21) Tested after it has been merged into the -mm patchset to make sure - that it still works with all of the other queued patches and various - changes in the VM, VFS, and other subsystems. +1) Has been tested with ``CONFIG_PREEMPT``, ``CONFIG_DEBUG_PREEMPT``, + ``CONFIG_SLUB_DEBUG``, ``CONFIG_DEBUG_PAGEALLOC``, ``CONFIG_DEBUG_MUTEXES``, + ``CONFIG_DEBUG_SPINLOCK``, ``CONFIG_DEBUG_ATOMIC_SLEEP``, + ``CONFIG_PROVE_RCU`` and ``CONFIG_DEBUG_OBJECTS_RCU_HEAD`` all + simultaneously enabled. -22) All memory barriers {e.g., ``barrier()``, ``rmb()``, ``wmb()``} need a - comment in the source code that explains the logic of what they are doing - and why. +2) Has been build- and runtime tested with and without ``CONFIG_SMP`` and + ``CONFIG_PREEMPT.`` -23) If any ioctl's are added by the patch, then also update - ``Documentation/userspace-api/ioctl/ioctl-number.rst``. +3) All codepaths have been exercised with all lockdep features enabled. -24) If your modified source code depends on or uses any of the kernel - APIs or features that are related to the following ``Kconfig`` symbols, - then test multiple builds with the related ``Kconfig`` symbols disabled - and/or ``=m`` (if that option is available) [not all of these at the - same time, just various/random combinations of them]: +4) Has been checked with injection of at least slab and page-allocation + failures. See ``Documentation/fault-injection/``. + If the new code is substantial, addition of subsystem-specific fault + injection might be appropriate. - ``CONFIG_SMP``, ``CONFIG_SYSFS``, ``CONFIG_PROC_FS``, ``CONFIG_INPUT``, ``CONFIG_PCI``, ``CONFIG_BLOCK``, ``CONFIG_PM``, ``CONFIG_MAGIC_SYSRQ``, - ``CONFIG_NET``, ``CONFIG_INET=n`` (but latter with ``CONFIG_NET=y``). +5) Tested with the most recent tag of linux-next to make sure that it still + works with all of the other queued patches and various changes in the VM, + VFS, and other subsystems. |