diff options
Diffstat (limited to 'Documentation/sound/soc/dpcm.rst')
| -rw-r--r-- | Documentation/sound/soc/dpcm.rst | 32 |
1 files changed, 15 insertions, 17 deletions
diff --git a/Documentation/sound/soc/dpcm.rst b/Documentation/sound/soc/dpcm.rst index 2d7ad1d91504..7b6aeab3c207 100644 --- a/Documentation/sound/soc/dpcm.rst +++ b/Documentation/sound/soc/dpcm.rst @@ -147,25 +147,25 @@ For the example above we have to define 4 FE DAI links and 6 BE DAI links. The FE DAI links are defined as follows :- :: + SND_SOC_DAILINK_DEFS(pcm0, + DAILINK_COMP_ARRAY(COMP_CPU("System Pin")), + DAILINK_COMP_ARRAY(COMP_DUMMY()), + DAILINK_COMP_ARRAY(COMP_PLATFORM("dsp-audio"))); + static struct snd_soc_dai_link machine_dais[] = { { .name = "PCM0 System", .stream_name = "System Playback", - .cpu_dai_name = "System Pin", - .platform_name = "dsp-audio", - .codec_name = "snd-soc-dummy", - .codec_dai_name = "snd-soc-dummy-dai", + SND_SOC_DAILINK_REG(pcm0), .dynamic = 1, .trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST}, - .dpcm_playback = 1, }, .....< other FE and BE DAI links here > }; This FE DAI link is pretty similar to a regular DAI link except that we also -set the DAI link to a DPCM FE with the ``dynamic = 1``. The supported FE stream -directions should also be set with the ``dpcm_playback`` and ``dpcm_capture`` -flags. There is also an option to specify the ordering of the trigger call for +set the DAI link to a DPCM FE with the ``dynamic = 1``. +There is also an option to specify the ordering of the trigger call for each FE. This allows the ASoC core to trigger the DSP before or after the other components (as some DSPs have strong requirements for the ordering DAI/DSP start and stop sequences). @@ -176,28 +176,26 @@ dynamic and will change depending on runtime config. The BE DAIs are configured as follows :- :: + SND_SOC_DAILINK_DEFS(headset, + DAILINK_COMP_ARRAY(COMP_CPU("ssp-dai.0")), + DAILINK_COMP_ARRAY(COMP_CODEC("rt5640.0-001c", "rt5640-aif1"))); + static struct snd_soc_dai_link machine_dais[] = { .....< FE DAI links here > { .name = "Codec Headset", - .cpu_dai_name = "ssp-dai.0", - .platform_name = "snd-soc-dummy", + SND_SOC_DAILINK_REG(headset), .no_pcm = 1, - .codec_name = "rt5640.0-001c", - .codec_dai_name = "rt5640-aif1", .ignore_suspend = 1, .ignore_pmdown_time = 1, .be_hw_params_fixup = hswult_ssp0_fixup, .ops = &haswell_ops, - .dpcm_playback = 1, - .dpcm_capture = 1, }, .....< other BE DAI links here > }; This BE DAI link connects DAI0 to the codec (in this case RT5460 AIF1). It sets -the ``no_pcm`` flag to mark it has a BE and sets flags for supported stream -directions using ``dpcm_playback`` and ``dpcm_capture`` above. +the ``no_pcm`` flag to mark it has a BE. The BE has also flags set for ignoring suspend and PM down time. This allows the BE to work in a hostless mode where the host CPU is not transferring data @@ -367,7 +365,7 @@ The machine driver sets some additional parameters to the DAI link i.e. .codec_dai_name = "modem-aif1", .codec_name = "modem", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM, + | SND_SOC_DAIFMT_CBP_CFP, .c2c_params = &dai_params, .num_c2c_params = 1, } |