summaryrefslogtreecommitdiff
path: root/Documentation/trace/events.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/trace/events.rst')
-rw-r--r--Documentation/trace/events.rst2069
1 files changed, 2069 insertions, 0 deletions
diff --git a/Documentation/trace/events.rst b/Documentation/trace/events.rst
new file mode 100644
index 000000000000..bdf1963ba6ba
--- /dev/null
+++ b/Documentation/trace/events.rst
@@ -0,0 +1,2069 @@
+=============
+Event Tracing
+=============
+
+:Author: Theodore Ts'o
+:Updated: Li Zefan and Tom Zanussi
+
+1. Introduction
+===============
+
+Tracepoints (see Documentation/trace/tracepoints.txt) can be used
+without creating custom kernel modules to register probe functions
+using the event tracing infrastructure.
+
+Not all tracepoints can be traced using the event tracing system;
+the kernel developer must provide code snippets which define how the
+tracing information is saved into the tracing buffer, and how the
+tracing information should be printed.
+
+2. Using Event Tracing
+======================
+
+2.1 Via the 'set_event' interface
+---------------------------------
+
+The events which are available for tracing can be found in the file
+/sys/kernel/debug/tracing/available_events.
+
+To enable a particular event, such as 'sched_wakeup', simply echo it
+to /sys/kernel/debug/tracing/set_event. For example::
+
+ # echo sched_wakeup >> /sys/kernel/debug/tracing/set_event
+
+.. Note:: '>>' is necessary, otherwise it will firstly disable all the events.
+
+To disable an event, echo the event name to the set_event file prefixed
+with an exclamation point::
+
+ # echo '!sched_wakeup' >> /sys/kernel/debug/tracing/set_event
+
+To disable all events, echo an empty line to the set_event file::
+
+ # echo > /sys/kernel/debug/tracing/set_event
+
+To enable all events, echo ``*:*`` or ``*:`` to the set_event file::
+
+ # echo *:* > /sys/kernel/debug/tracing/set_event
+
+The events are organized into subsystems, such as ext4, irq, sched,
+etc., and a full event name looks like this: <subsystem>:<event>. The
+subsystem name is optional, but it is displayed in the available_events
+file. All of the events in a subsystem can be specified via the syntax
+``<subsystem>:*``; for example, to enable all irq events, you can use the
+command::
+
+ # echo 'irq:*' > /sys/kernel/debug/tracing/set_event
+
+2.2 Via the 'enable' toggle
+---------------------------
+
+The events available are also listed in /sys/kernel/debug/tracing/events/ hierarchy
+of directories.
+
+To enable event 'sched_wakeup'::
+
+ # echo 1 > /sys/kernel/debug/tracing/events/sched/sched_wakeup/enable
+
+To disable it::
+
+ # echo 0 > /sys/kernel/debug/tracing/events/sched/sched_wakeup/enable
+
+To enable all events in sched subsystem::
+
+ # echo 1 > /sys/kernel/debug/tracing/events/sched/enable
+
+To enable all events::
+
+ # echo 1 > /sys/kernel/debug/tracing/events/enable
+
+When reading one of these enable files, there are four results:
+
+ - 0 - all events this file affects are disabled
+ - 1 - all events this file affects are enabled
+ - X - there is a mixture of events enabled and disabled
+ - ? - this file does not affect any event
+
+2.3 Boot option
+---------------
+
+In order to facilitate early boot debugging, use boot option::
+
+ trace_event=[event-list]
+
+event-list is a comma separated list of events. See section 2.1 for event
+format.
+
+3. Defining an event-enabled tracepoint
+=======================================
+
+See The example provided in samples/trace_events
+
+4. Event formats
+================
+
+Each trace event has a 'format' file associated with it that contains
+a description of each field in a logged event. This information can
+be used to parse the binary trace stream, and is also the place to
+find the field names that can be used in event filters (see section 5).
+
+It also displays the format string that will be used to print the
+event in text mode, along with the event name and ID used for
+profiling.
+
+Every event has a set of ``common`` fields associated with it; these are
+the fields prefixed with ``common_``. The other fields vary between
+events and correspond to the fields defined in the TRACE_EVENT
+definition for that event.
+
+Each field in the format has the form::
+
+ field:field-type field-name; offset:N; size:N;
+
+where offset is the offset of the field in the trace record and size
+is the size of the data item, in bytes.
+
+For example, here's the information displayed for the 'sched_wakeup'
+event::
+
+ # cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/format
+
+ name: sched_wakeup
+ ID: 60
+ format:
+ field:unsigned short common_type; offset:0; size:2;
+ field:unsigned char common_flags; offset:2; size:1;
+ field:unsigned char common_preempt_count; offset:3; size:1;
+ field:int common_pid; offset:4; size:4;
+ field:int common_tgid; offset:8; size:4;
+
+ field:char comm[TASK_COMM_LEN]; offset:12; size:16;
+ field:pid_t pid; offset:28; size:4;
+ field:int prio; offset:32; size:4;
+ field:int success; offset:36; size:4;
+ field:int cpu; offset:40; size:4;
+
+ print fmt: "task %s:%d [%d] success=%d [%03d]", REC->comm, REC->pid,
+ REC->prio, REC->success, REC->cpu
+
+This event contains 10 fields, the first 5 common and the remaining 5
+event-specific. All the fields for this event are numeric, except for
+'comm' which is a string, a distinction important for event filtering.
+
+5. Event filtering
+==================
+
+Trace events can be filtered in the kernel by associating boolean
+'filter expressions' with them. As soon as an event is logged into
+the trace buffer, its fields are checked against the filter expression
+associated with that event type. An event with field values that
+'match' the filter will appear in the trace output, and an event whose
+values don't match will be discarded. An event with no filter
+associated with it matches everything, and is the default when no
+filter has been set for an event.
+
+5.1 Expression syntax
+---------------------
+
+A filter expression consists of one or more 'predicates' that can be
+combined using the logical operators '&&' and '||'. A predicate is
+simply a clause that compares the value of a field contained within a
+logged event with a constant value and returns either 0 or 1 depending
+on whether the field value matched (1) or didn't match (0)::
+
+ field-name relational-operator value
+
+Parentheses can be used to provide arbitrary logical groupings and
+double-quotes can be used to prevent the shell from interpreting
+operators as shell metacharacters.
+
+The field-names available for use in filters can be found in the
+'format' files for trace events (see section 4).
+
+The relational-operators depend on the type of the field being tested:
+
+The operators available for numeric fields are:
+
+==, !=, <, <=, >, >=, &
+
+And for string fields they are:
+
+==, !=, ~
+
+The glob (~) accepts a wild card character (\*,?) and character classes
+([). For example::
+
+ prev_comm ~ "*sh"
+ prev_comm ~ "sh*"
+ prev_comm ~ "*sh*"
+ prev_comm ~ "ba*sh"
+
+5.2 Setting filters
+-------------------
+
+A filter for an individual event is set by writing a filter expression
+to the 'filter' file for the given event.
+
+For example::
+
+ # cd /sys/kernel/debug/tracing/events/sched/sched_wakeup
+ # echo "common_preempt_count > 4" > filter
+
+A slightly more involved example::
+
+ # cd /sys/kernel/debug/tracing/events/signal/signal_generate
+ # echo "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter
+
+If there is an error in the expression, you'll get an 'Invalid
+argument' error when setting it, and the erroneous string along with
+an error message can be seen by looking at the filter e.g.::
+
+ # cd /sys/kernel/debug/tracing/events/signal/signal_generate
+ # echo "((sig >= 10 && sig < 15) || dsig == 17) && comm != bash" > filter
+ -bash: echo: write error: Invalid argument
+ # cat filter
+ ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash
+ ^
+ parse_error: Field not found
+
+Currently the caret ('^') for an error always appears at the beginning of
+the filter string; the error message should still be useful though
+even without more accurate position info.
+
+5.3 Clearing filters
+--------------------
+
+To clear the filter for an event, write a '0' to the event's filter
+file.
+
+To clear the filters for all events in a subsystem, write a '0' to the
+subsystem's filter file.
+
+5.3 Subsystem filters
+---------------------
+
+For convenience, filters for every event in a subsystem can be set or
+cleared as a group by writing a filter expression into the filter file
+at the root of the subsystem. Note however, that if a filter for any
+event within the subsystem lacks a field specified in the subsystem
+filter, or if the filter can't be applied for any other reason, the
+filter for that event will retain its previous setting. This can
+result in an unintended mixture of filters which could lead to
+confusing (to the user who might think different filters are in
+effect) trace output. Only filters that reference just the common
+fields can be guaranteed to propagate successfully to all events.
+
+Here are a few subsystem filter examples that also illustrate the
+above points:
+
+Clear the filters on all events in the sched subsystem::
+
+ # cd /sys/kernel/debug/tracing/events/sched
+ # echo 0 > filter
+ # cat sched_switch/filter
+ none
+ # cat sched_wakeup/filter
+ none
+
+Set a filter using only common fields for all events in the sched
+subsystem (all events end up with the same filter)::
+
+ # cd /sys/kernel/debug/tracing/events/sched
+ # echo common_pid == 0 > filter
+ # cat sched_switch/filter
+ common_pid == 0
+ # cat sched_wakeup/filter
+ common_pid == 0
+
+Attempt to set a filter using a non-common field for all events in the
+sched subsystem (all events but those that have a prev_pid field retain
+their old filters)::
+
+ # cd /sys/kernel/debug/tracing/events/sched
+ # echo prev_pid == 0 > filter
+ # cat sched_switch/filter
+ prev_pid == 0
+ # cat sched_wakeup/filter
+ common_pid == 0
+
+5.4 PID filtering
+-----------------
+
+The set_event_pid file in the same directory as the top events directory
+exists, will filter all events from tracing any task that does not have the
+PID listed in the set_event_pid file.
+::
+
+ # cd /sys/kernel/debug/tracing
+ # echo $$ > set_event_pid
+ # echo 1 > events/enable
+
+Will only trace events for the current task.
+
+To add more PIDs without losing the PIDs already included, use '>>'.
+::
+
+ # echo 123 244 1 >> set_event_pid
+
+
+6. Event triggers
+=================
+
+Trace events can be made to conditionally invoke trigger 'commands'
+which can take various forms and are described in detail below;
+examples would be enabling or disabling other trace events or invoking
+a stack trace whenever the trace event is hit. Whenever a trace event
+with attached triggers is invoked, the set of trigger commands
+associated with that event is invoked. Any given trigger can
+additionally have an event filter of the same form as described in
+section 5 (Event filtering) associated with it - the command will only
+be invoked if the event being invoked passes the associated filter.
+If no filter is associated with the trigger, it always passes.
+
+Triggers are added to and removed from a particular event by writing
+trigger expressions to the 'trigger' file for the given event.
+
+A given event can have any number of triggers associated with it,
+subject to any restrictions that individual commands may have in that
+regard.
+
+Event triggers are implemented on top of "soft" mode, which means that
+whenever a trace event has one or more triggers associated with it,
+the event is activated even if it isn't actually enabled, but is
+disabled in a "soft" mode. That is, the tracepoint will be called,
+but just will not be traced, unless of course it's actually enabled.
+This scheme allows triggers to be invoked even for events that aren't
+enabled, and also allows the current event filter implementation to be
+used for conditionally invoking triggers.
+
+The syntax for event triggers is roughly based on the syntax for
+set_ftrace_filter 'ftrace filter commands' (see the 'Filter commands'
+section of Documentation/trace/ftrace.txt), but there are major
+differences and the implementation isn't currently tied to it in any
+way, so beware about making generalizations between the two.
+
+6.1 Expression syntax
+---------------------
+
+Triggers are added by echoing the command to the 'trigger' file::
+
+ # echo 'command[:count] [if filter]' > trigger
+
+Triggers are removed by echoing the same command but starting with '!'
+to the 'trigger' file::
+
+ # echo '!command[:count] [if filter]' > trigger
+
+The [if filter] part isn't used in matching commands when removing, so
+leaving that off in a '!' command will accomplish the same thing as
+having it in.
+
+The filter syntax is the same as that described in the 'Event
+filtering' section above.
+
+For ease of use, writing to the trigger file using '>' currently just
+adds or removes a single trigger and there's no explicit '>>' support
+('>' actually behaves like '>>') or truncation support to remove all
+triggers (you have to use '!' for each one added.)
+
+6.2 Supported trigger commands
+------------------------------
+
+The following commands are supported:
+
+- enable_event/disable_event
+
+ These commands can enable or disable another trace event whenever
+ the triggering event is hit. When these commands are registered,
+ the other trace event is activated, but disabled in a "soft" mode.
+ That is, the tracepoint will be called, but just will not be traced.
+ The event tracepoint stays in this mode as long as there's a trigger
+ in effect that can trigger it.
+
+ For example, the following trigger causes kmalloc events to be
+ traced when a read system call is entered, and the :1 at the end
+ specifies that this enablement happens only once::
+
+ # echo 'enable_event:kmem:kmalloc:1' > \
+ /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger
+
+ The following trigger causes kmalloc events to stop being traced
+ when a read system call exits. This disablement happens on every
+ read system call exit::
+
+ # echo 'disable_event:kmem:kmalloc' > \
+ /sys/kernel/debug/tracing/events/syscalls/sys_exit_read/trigger
+
+ The format is::
+
+ enable_event:<system>:<event>[:count]
+ disable_event:<system>:<event>[:count]
+
+ To remove the above commands::
+
+ # echo '!enable_event:kmem:kmalloc:1' > \
+ /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger
+
+ # echo '!disable_event:kmem:kmalloc' > \
+ /sys/kernel/debug/tracing/events/syscalls/sys_exit_read/trigger
+
+ Note that there can be any number of enable/disable_event triggers
+ per triggering event, but there can only be one trigger per
+ triggered event. e.g. sys_enter_read can have triggers enabling both
+ kmem:kmalloc and sched:sched_switch, but can't have two kmem:kmalloc
+ versions such as kmem:kmalloc and kmem:kmalloc:1 or 'kmem:kmalloc if
+ bytes_req == 256' and 'kmem:kmalloc if bytes_alloc == 256' (they
+ could be combined into a single filter on kmem:kmalloc though).
+
+- stacktrace
+
+ This command dumps a stacktrace in the trace buffer whenever the
+ triggering event occurs.
+
+ For example, the following trigger dumps a stacktrace every time the
+ kmalloc tracepoint is hit::
+
+ # echo 'stacktrace' > \
+ /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
+
+ The following trigger dumps a stacktrace the first 5 times a kmalloc
+ request happens with a size >= 64K::
+
+ # echo 'stacktrace:5 if bytes_req >= 65536' > \
+ /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
+
+ The format is::
+
+ stacktrace[:count]
+
+ To remove the above commands::
+
+ # echo '!stacktrace' > \
+ /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
+
+ # echo '!stacktrace:5 if bytes_req >= 65536' > \
+ /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
+
+ The latter can also be removed more simply by the following (without
+ the filter)::
+
+ # echo '!stacktrace:5' > \
+ /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
+
+ Note that there can be only one stacktrace trigger per triggering
+ event.
+
+- snapshot
+
+ This command causes a snapshot to be triggered whenever the
+ triggering event occurs.
+
+ The following command creates a snapshot every time a block request
+ queue is unplugged with a depth > 1. If you were tracing a set of
+ events or functions at the time, the snapshot trace buffer would
+ capture those events when the trigger event occurred::
+
+ # echo 'snapshot if nr_rq > 1' > \
+ /sys/kernel/debug/tracing/events/block/block_unplug/trigger
+
+ To only snapshot once::
+
+ # echo 'snapshot:1 if nr_rq > 1' > \
+ /sys/kernel/debug/tracing/events/block/block_unplug/trigger
+
+ To remove the above commands::
+
+ # echo '!snapshot if nr_rq > 1' > \
+ /sys/kernel/debug/tracing/events/block/block_unplug/trigger
+
+ # echo '!snapshot:1 if nr_rq > 1' > \
+ /sys/kernel/debug/tracing/events/block/block_unplug/trigger
+
+ Note that there can be only one snapshot trigger per triggering
+ event.
+
+- traceon/traceoff
+
+ These commands turn tracing on and off when the specified events are
+ hit. The parameter determines how many times the tracing system is
+ turned on and off. If unspecified, there is no limit.
+
+ The following command turns tracing off the first time a block
+ request queue is unplugged with a depth > 1. If you were tracing a
+ set of events or functions at the time, you could then examine the
+ trace buffer to see the sequence of events that led up to the
+ trigger event::
+
+ # echo 'traceoff:1 if nr_rq > 1' > \
+ /sys/kernel/debug/tracing/events/block/block_unplug/trigger
+
+ To always disable tracing when nr_rq > 1::
+
+ # echo 'traceoff if nr_rq > 1' > \
+ /sys/kernel/debug/tracing/events/block/block_unplug/trigger
+
+ To remove the above commands::
+
+ # echo '!traceoff:1 if nr_rq > 1' > \
+ /sys/kernel/debug/tracing/events/block/block_unplug/trigger
+
+ # echo '!traceoff if nr_rq > 1' > \
+ /sys/kernel/debug/tracing/events/block/block_unplug/trigger
+
+ Note that there can be only one traceon or traceoff trigger per
+ triggering event.
+
+- hist
+
+ This command aggregates event hits into a hash table keyed on one or
+ more trace event format fields (or stacktrace) and a set of running
+ totals derived from one or more trace event format fields and/or
+ event counts (hitcount).
+
+ The format of a hist trigger is as follows::
+
+ hist:keys=<field1[,field2,...]>[:values=<field1[,field2,...]>]
+ [:sort=<field1[,field2,...]>][:size=#entries][:pause][:continue]
+ [:clear][:name=histname1] [if <filter>]
+
+ When a matching event is hit, an entry is added to a hash table
+ using the key(s) and value(s) named. Keys and values correspond to
+ fields in the event's format description. Values must correspond to
+ numeric fields - on an event hit, the value(s) will be added to a
+ sum kept for that field. The special string 'hitcount' can be used
+ in place of an explicit value field - this is simply a count of
+ event hits. If 'values' isn't specified, an implicit 'hitcount'
+ value will be automatically created and used as the only value.
+ Keys can be any field, or the special string 'stacktrace', which
+ will use the event's kernel stacktrace as the key. The keywords
+ 'keys' or 'key' can be used to specify keys, and the keywords
+ 'values', 'vals', or 'val' can be used to specify values. Compound
+ keys consisting of up to two fields can be specified by the 'keys'
+ keyword. Hashing a compound key produces a unique entry in the
+ table for each unique combination of component keys, and can be
+ useful for providing more fine-grained summaries of event data.
+ Additionally, sort keys consisting of up to two fields can be
+ specified by the 'sort' keyword. If more than one field is
+ specified, the result will be a 'sort within a sort': the first key
+ is taken to be the primary sort key and the second the secondary
+ key. If a hist trigger is given a name using the 'name' parameter,
+ its histogram data will be shared with other triggers of the same
+ name, and trigger hits will update this common data. Only triggers
+ with 'compatible' fields can be combined in this way; triggers are
+ 'compatible' if the fields named in the trigger share the same
+ number and type of fields and those fields also have the same names.
+ Note that any two events always share the compatible 'hitcount' and
+ 'stacktrace' fields and can therefore be combined using those
+ fields, however pointless that may be.
+
+ 'hist' triggers add a 'hist' file to each event's subdirectory.
+ Reading the 'hist' file for the event will dump the hash table in
+ its entirety to stdout. If there are multiple hist triggers
+ attached to an event, there will be a table for each trigger in the
+ output. The table displayed for a named trigger will be the same as
+ any other instance having the same name. Each printed hash table
+ entry is a simple list of the keys and values comprising the entry;
+ keys are printed first and are delineated by curly braces, and are
+ followed by the set of value fields for the entry. By default,
+ numeric fields are displayed as base-10 integers. This can be
+ modified by appending any of the following modifiers to the field
+ name:
+
+ - .hex display a number as a hex value
+ - .sym display an address as a symbol
+ - .sym-offset display an address as a symbol and offset
+ - .syscall display a syscall id as a system call name
+ - .execname display a common_pid as a program name
+
+ Note that in general the semantics of a given field aren't
+ interpreted when applying a modifier to it, but there are some
+ restrictions to be aware of in this regard:
+
+ - only the 'hex' modifier can be used for values (because values
+ are essentially sums, and the other modifiers don't make sense
+ in that context).
+ - the 'execname' modifier can only be used on a 'common_pid'. The
+ reason for this is that the execname is simply the 'comm' value
+ saved for the 'current' process when an event was triggered,
+ which is the same as the common_pid value saved by the event
+ tracing code. Trying to apply that comm value to other pid
+ values wouldn't be correct, and typically events that care save
+ pid-specific comm fields in the event itself.
+
+ A typical usage scenario would be the following to enable a hist
+ trigger, read its current contents, and then turn it off::
+
+ # echo 'hist:keys=skbaddr.hex:vals=len' > \
+ /sys/kernel/debug/tracing/events/net/netif_rx/trigger
+
+ # cat /sys/kernel/debug/tracing/events/net/netif_rx/hist
+
+ # echo '!hist:keys=skbaddr.hex:vals=len' > \
+ /sys/kernel/debug/tracing/events/net/netif_rx/trigger
+
+ The trigger file itself can be read to show the details of the
+ currently attached hist trigger. This information is also displayed
+ at the top of the 'hist' file when read.
+
+ By default, the size of the hash table is 2048 entries. The 'size'
+ parameter can be used to specify more or fewer than that. The units
+ are in terms of hashtable entries - if a run uses more entries than
+ specified, the results will show the number of 'drops', the number
+ of hits that were ignored. The size should be a power of 2 between
+ 128 and 131072 (any non- power-of-2 number specified will be rounded
+ up).
+
+ The 'sort' parameter can be used to specify a value field to sort
+ on. The default if unspecified is 'hitcount' and the default sort
+ order is 'ascending'. To sort in the opposite direction, append
+ .descending' to the sort key.
+
+ The 'pause' parameter can be used to pause an existing hist trigger
+ or to start a hist trigger but not log any events until told to do
+ so. 'continue' or 'cont' can be used to start or restart a paused
+ hist trigger.
+
+ The 'clear' parameter will clear the contents of a running hist
+ trigger and leave its current paused/active state.
+
+ Note that the 'pause', 'cont', and 'clear' parameters should be
+ applied using 'append' shell operator ('>>') if applied to an
+ existing trigger, rather than via the '>' operator, which will cause
+ the trigger to be removed through truncation.
+
+- enable_hist/disable_hist
+
+ The enable_hist and disable_hist triggers can be used to have one
+ event conditionally start and stop another event's already-attached
+ hist trigger. Any number of enable_hist and disable_hist triggers
+ can be attached to a given event, allowing that event to kick off
+ and stop aggregations on a host of other events.
+
+ The format is very similar to the enable/disable_event triggers::
+
+ enable_hist:<system>:<event>[:count]
+ disable_hist:<system>:<event>[:count]
+
+ Instead of enabling or disabling the tracing of the target event
+ into the trace buffer as the enable/disable_event triggers do, the
+ enable/disable_hist triggers enable or disable the aggregation of
+ the target event into a hash table.
+
+ A typical usage scenario for the enable_hist/disable_hist triggers
+ would be to first set up a paused hist trigger on some event,
+ followed by an enable_hist/disable_hist pair that turns the hist
+ aggregation on and off when conditions of interest are hit::
+
+ # echo 'hist:keys=skbaddr.hex:vals=len:pause' > \
+ /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger
+
+ # echo 'enable_hist:net:netif_receive_skb if filename==/usr/bin/wget' > \
+ /sys/kernel/debug/tracing/events/sched/sched_process_exec/trigger
+
+ # echo 'disable_hist:net:netif_receive_skb if comm==wget' > \
+ /sys/kernel/debug/tracing/events/sched/sched_process_exit/trigger
+
+ The above sets up an initially paused hist trigger which is unpaused
+ and starts aggregating events when a given program is executed, and
+ which stops aggregating when the process exits and the hist trigger
+ is paused again.
+
+ The examples below provide a more concrete illustration of the
+ concepts and typical usage patterns discussed above.
+
+
+6.2 'hist' trigger examples
+---------------------------
+
+ The first set of examples creates aggregations using the kmalloc
+ event. The fields that can be used for the hist trigger are listed
+ in the kmalloc event's format file::
+
+ # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/format
+ name: kmalloc
+ ID: 374
+ format:
+ field:unsigned short common_type; offset:0; size:2; signed:0;
+ field:unsigned char common_flags; offset:2; size:1; signed:0;
+ field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
+ field:int common_pid; offset:4; size:4; signed:1;
+
+ field:unsigned long call_site; offset:8; size:8; signed:0;
+ field:const void * ptr; offset:16; size:8; signed:0;
+ field:size_t bytes_req; offset:24; size:8; signed:0;
+ field:size_t bytes_alloc; offset:32; size:8; signed:0;
+ field:gfp_t gfp_flags; offset:40; size:4; signed:0;
+
+ We'll start by creating a hist trigger that generates a simple table
+ that lists the total number of bytes requested for each function in
+ the kernel that made one or more calls to kmalloc::
+
+ # echo 'hist:key=call_site:val=bytes_req' > \
+ /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
+
+ This tells the tracing system to create a 'hist' trigger using the
+ call_site field of the kmalloc event as the key for the table, which
+ just means that each unique call_site address will have an entry
+ created for it in the table. The 'val=bytes_req' parameter tells
+ the hist trigger that for each unique entry (call_site) in the
+ table, it should keep a running total of the number of bytes
+ requested by that call_site.
+
+ We'll let it run for awhile and then dump the contents of the 'hist'
+ file in the kmalloc event's subdirectory (for readability, a number
+ of entries have been omitted)::
+
+ # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist
+ # trigger info: hist:keys=call_site:vals=bytes_req:sort=hitcount:size=2048 [active]
+
+ { call_site: 18446744072106379007 } hitcount: 1 bytes_req: 176
+ { call_site: 18446744071579557049 } hitcount: 1 bytes_req: 1024
+ { call_site: 18446744071580608289 } hitcount: 1 bytes_req: 16384
+ { call_site: 18446744071581827654 } hitcount: 1 bytes_req: 24
+ { call_site: 18446744071580700980 } hitcount: 1 bytes_req: 8
+ { call_site: 18446744071579359876 } hitcount: 1 bytes_req: 152
+ { call_site: 18446744071580795365 } hitcount: 3 bytes_req: 144
+ { call_site: 18446744071581303129 } hitcount: 3 bytes_req: 144
+ { call_site: 18446744071580713234 } hitcount: 4 bytes_req: 2560
+ { call_site: 18446744071580933750 } hitcount: 4 bytes_req: 736
+ .
+ .
+ .
+ { call_site: 18446744072106047046 } hitcount: 69 bytes_req: 5576
+ { call_site: 18446744071582116407 } hitcount: 73 bytes_req: 2336
+ { call_site: 18446744072106054684 } hitcount: 136 bytes_req: 140504
+ { call_site: 18446744072106224230 } hitcount: 136 bytes_req: 19584
+ { call_site: 18446744072106078074 } hitcount: 153 bytes_req: 2448
+ { call_site: 18446744072106062406 } hitcount: 153 bytes_req: 36720
+ { call_site: 18446744071582507929 } hitcount: 153 bytes_req: 37088
+ { call_site: 18446744072102520590 } hitcount: 273 bytes_req: 10920
+ { call_site: 18446744071582143559 } hitcount: 358 bytes_req: 716
+ { call_site: 18446744072106465852 } hitcount: 417 bytes_req: 56712
+ { call_site: 18446744072102523378 } hitcount: 485 bytes_req: 27160
+ { call_site: 18446744072099568646 } hitcount: 1676 bytes_req: 33520
+
+ Totals:
+ Hits: 4610
+ Entries: 45
+ Dropped: 0
+
+ The output displays a line for each entry, beginning with the key
+ specified in the trigger, followed by the value(s) also specified in
+ the trigger. At the beginning of the output is a line that displays
+ the trigger info, which can also be displayed by reading the
+ 'trigger' file::
+
+ # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
+ hist:keys=call_site:vals=bytes_req:sort=hitcount:size=2048 [active]
+
+ At the end of the output are a few lines that display the overall
+ totals for the run. The 'Hits' field shows the total number of
+ times the event trigger was hit, the 'Entries' field shows the total
+ number of used entries in the hash table, and the 'Dropped' field
+ shows the number of hits that were dropped because the number of
+ used entries for the run exceeded the maximum number of entries
+ allowed for the table (normally 0, but if not a hint that you may
+ want to increase the size of the table using the 'size' parameter).
+
+ Notice in the above output that there's an extra field, 'hitcount',
+ which wasn't specified in the trigger. Also notice that in the
+ trigger info output, there's a parameter, 'sort=hitcount', which
+ wasn't specified in the trigger either. The reason for that is that
+ every trigger implicitly keeps a count of the total number of hits
+ attributed to a given entry, called the 'hitcount'. That hitcount
+ information is explicitly displayed in the output, and in the
+ absence of a user-specified sort parameter, is used as the default
+ sort field.
+
+ The value 'hitcount' can be used in place of an explicit value in
+ the 'values' parameter if you don't really need to have any
+ particular field summed and are mainly interested in hit
+ frequencies.
+
+ To turn the hist trigger off, simply call up the trigger in the
+ command history and re-execute it with a '!' prepended::
+
+ # echo '!hist:key=call_site:val=bytes_req' > \
+ /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
+
+ Finally, notice that the call_site as displayed in the output above
+ isn't really very useful. It's an address, but normally addresses
+ are displayed in hex. To have a numeric field displayed as a hex
+ value, simply append '.hex' to the field name in the trigger::
+
+ # echo 'hist:key=call_site.hex:val=bytes_req' > \
+ /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
+
+ # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist
+ # trigger info: hist:keys=call_site.hex:vals=bytes_req:sort=hitcount:size=2048 [active]
+
+ { call_site: ffffffffa026b291 } hitcount: 1 bytes_req: 433
+ { call_site: ffffffffa07186ff } hitcount: 1 bytes_req: 176
+ { call_site: ffffffff811ae721 } hitcount: 1 bytes_req: 16384
+ { call_site: ffffffff811c5134 } hitcount: 1 bytes_req: 8
+ { call_site: ffffffffa04a9ebb } hitcount: 1 bytes_req: 511
+ { call_site: ffffffff8122e0a6 } hitcount: 1 bytes_req: 12
+ { call_site: ffffffff8107da84 } hitcount: 1 bytes_req: 152
+ { call_site: ffffffff812d8246 } hitcount: 1 bytes_req: 24
+ { call_site: ffffffff811dc1e5 } hitcount: 3 bytes_req: 144
+ { call_site: ffffffffa02515e8 } hitcount: 3 bytes_req: 648
+ { call_site: ffffffff81258159 } hitcount: 3 bytes_req: 144
+ { call_site: ffffffff811c80f4 } hitcount: 4 bytes_req: 544
+ .
+ .
+ .
+ { call_site: ffffffffa06c7646 } hitcount: 106 bytes_req: 8024
+ { call_site: ffffffffa06cb246 } hitcount: 132 bytes_req: 31680
+ { call_site: ffffffffa06cef7a } hitcount: 132 bytes_req: 2112
+ { call_site: ffffffff8137e399 } hitcount: 132 bytes_req: 23232
+ { call_site: ffffffffa06c941c } hitcount: 185 bytes_req: 171360
+ { call_site: ffffffffa06f2a66 } hitcount: 185 bytes_req: 26640
+ { call_site: ffffffffa036a70e } hitcount: 265 bytes_req: 10600
+ { call_site: ffffffff81325447 } hitcount: 292 bytes_req: 584
+ { call_site: ffffffffa072da3c } hitcount: 446 bytes_req: 60656
+ { call_site: ffffffffa036b1f2 } hitcount: 526 bytes_req: 29456
+ { call_site: ffffffffa0099c06 } hitcount: 1780 bytes_req: 35600
+
+ Totals:
+ Hits: 4775
+ Entries: 46
+ Dropped: 0
+
+ Even that's only marginally more useful - while hex values do look
+ more like addresses, what users are typically more interested in
+ when looking at text addresses are the corresponding symbols
+ instead. To have an address displayed as symbolic value instead,
+ simply append '.sym' or '.sym-offset' to the field name in the
+ trigger::
+
+ # echo 'hist:key=call_site.sym:val=bytes_req' > \
+ /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
+
+ # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist
+ # trigger info: hist:keys=call_site.sym:vals=bytes_req:sort=hitcount:size=2048 [active]
+
+ { call_site: [ffffffff810adcb9] syslog_print_all } hitcount: 1 bytes_req: 1024
+ { call_site: [ffffffff8154bc62] usb_control_msg } hitcount: 1 bytes_req: 8
+ { call_site: [ffffffffa00bf6fe] hidraw_send_report [hid] } hitcount: 1 bytes_req: 7
+ { call_site: [ffffffff8154acbe] usb_alloc_urb } hitcount: 1 bytes_req: 192
+ { call_site: [ffffffffa00bf1ca] hidraw_report_event [hid] } hitcount: 1 bytes_req: 7
+ { call_site: [ffffffff811e3a25] __seq_open_private } hitcount: 1 bytes_req: 40
+ { call_site: [ffffffff8109524a] alloc_fair_sched_group } hitcount: 2 bytes_req: 128
+ { call_site: [ffffffff811febd5] fsnotify_alloc_group } hitcount: 2 bytes_req: 528
+ { call_site: [ffffffff81440f58] __tty_buffer_request_room } hitcount: 2 bytes_req: 2624
+ { call_site: [ffffffff81200ba6] inotify_new_group } hitcount: 2 bytes_req: 96
+ { call_site: [ffffffffa05e19af] ieee80211_start_tx_ba_session [mac80211] } hitcount: 2 bytes_req: 464
+ { call_site: [ffffffff81672406] tcp_get_metrics } hitcount: 2 bytes_req: 304
+ { call_site: [ffffffff81097ec2] alloc_rt_sched_group } hitcount: 2 bytes_req: 128
+ { call_site: [ffffffff81089b05] sched_create_group } hitcount: 2 bytes_req: 1424
+ .
+ .
+ .
+ { call_site: [ffffffffa04a580c] intel_crtc_page_flip [i915] } hitcount: 1185 bytes_req: 123240
+ { call_site: [ffffffffa0287592] drm_mode_page_flip_ioctl [drm] } hitcount: 1185 bytes_req: 104280
+ { call_site: [ffffffffa04c4a3c] intel_plane_duplicate_state [i915] } hitcount: 1402 bytes_req: 190672
+ { call_site: [ffffffff812891ca] ext4_find_extent } hitcount: 1518 bytes_req: 146208
+ { call_site: [ffffffffa029070e] drm_vma_node_allow [drm] } hitcount: 1746 bytes_req: 69840
+ { call_site: [ffffffffa045e7c4] i915_gem_do_execbuffer.isra.23 [i915] } hitcount: 2021 bytes_req: 792312
+ { call_site: [ffffffffa02911f2] drm_modeset_lock_crtc [drm] } hitcount: 2592 bytes_req: 145152
+ { call_site: [ffffffffa0489a66] intel_ring_begin [i915] } hitcount: 2629 bytes_req: 378576
+ { call_site: [ffffffffa046041c] i915_gem_execbuffer2 [i915] } hitcount: 2629 bytes_req: 3783248
+ { call_site: [ffffffff81325607] apparmor_file_alloc_security } hitcount: 5192 bytes_req: 10384
+ { call_site: [ffffffffa00b7c06] hid_report_raw_event [hid] } hitcount: 5529 bytes_req: 110584
+ { call_site: [ffffffff8131ebf7] aa_alloc_task_context } hitcount: 21943 bytes_req: 702176
+ { call_site: [ffffffff8125847d] ext4_htree_store_dirent } hitcount: 55759 bytes_req: 5074265
+
+ Totals:
+ Hits: 109928
+ Entries: 71
+ Dropped: 0
+
+ Because the default sort key above is 'hitcount', the above shows a
+ the list of call_sites by increasing hitcount, so that at the bottom
+ we see the functions that made the most kmalloc calls during the
+ run. If instead we we wanted to see the top kmalloc callers in
+ terms of the number of bytes requested rather than the number of
+ calls, and we wanted the top caller to appear at the top, we can use
+ the 'sort' parameter, along with the 'descending' modifier::
+
+ # echo 'hist:key=call_site.sym:val=bytes_req:sort=bytes_req.descending' > \
+ /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
+
+ # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist
+ # trigger info: hist:keys=call_site.sym:vals=bytes_req:sort=bytes_req.descending:size=2048 [active]
+
+ { call_site: [ffffffffa046041c] i915_gem_execbuffer2 [i915] } hitcount: 2186 bytes_req: 3397464
+ { call_site: [ffffffffa045e7c4] i915_gem_do_execbuffer.isra.23 [i915] } hitcount: 1790 bytes_req: 712176
+ { call_site: [ffffffff8125847d] ext4_htree_store_dirent } hitcount: 8132 bytes_req: 513135
+ { call_site: [ffffffff811e2a1b] seq_buf_alloc } hitcount: 106 bytes_req: 440128
+ { call_site: [ffffffffa0489a66] intel_ring_begin [i915] } hitcount: 2186 bytes_req: 314784
+ { call_site: [ffffffff812891ca] ext4_find_extent } hitcount: 2174 bytes_req: 208992
+ { call_site: [ffffffff811ae8e1] __kmalloc } hitcount: 8 bytes_req: 131072
+ { call_site: [ffffffffa04c4a3c] intel_plane_duplicate_state [i915] } hitcount: 859 bytes_req: 116824
+ { call_site: [ffffffffa02911f2] drm_modeset_lock_crtc [drm] } hitcount: 1834 bytes_req: 102704
+ { call_site: [ffffffffa04a580c] intel_crtc_page_flip [i915] } hitcount: 972 bytes_req: 101088
+ { call_site: [ffffffffa0287592] drm_mode_page_flip_ioctl [drm] } hitcount: 972 bytes_req: 85536
+ { call_site: [ffffffffa00b7c06] hid_report_raw_event [hid] } hitcount: 3333 bytes_req: 66664
+ { call_site: [ffffffff8137e559] sg_kmalloc } hitcount: 209 bytes_req: 61632
+ .
+ .
+ .
+ { call_site: [ffffffff81095225] alloc_fair_sched_group } hitcount: 2 bytes_req: 128
+ { call_site: [ffffffff81097ec2] alloc_rt_sched_group } hitcount: 2 bytes_req: 128
+ { call_site: [ffffffff812d8406] copy_semundo } hitcount: 2 bytes_req: 48
+ { call_site: [ffffffff81200ba6] inotify_new_group } hitcount: 1 bytes_req: 48
+ { call_site: [ffffffffa027121a] drm_getmagic [drm] } hitcount: 1 bytes_req: 48
+ { call_site: [ffffffff811e3a25] __seq_open_private } hitcount: 1 bytes_req: 40
+ { call_site: [ffffffff811c52f4] bprm_change_interp } hitcount: 2 bytes_req: 16
+ { call_site: [ffffffff8154bc62] usb_control_msg } hitcount: 1 bytes_req: 8
+ { call_site: [ffffffffa00bf1ca] hidraw_report_event [hid] } hitcount: 1 bytes_req: 7
+ { call_site: [ffffffffa00bf6fe] hidraw_send_report [hid] } hitcount: 1 bytes_req: 7
+
+ Totals:
+ Hits: 32133
+ Entries: 81
+ Dropped: 0
+
+ To display the offset and size information in addition to the symbol
+ name, just use 'sym-offset' instead::
+
+ # echo 'hist:key=call_site.sym-offset:val=bytes_req:sort=bytes_req.descending' > \
+ /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
+
+ # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist
+ # trigger info: hist:keys=call_site.sym-offset:vals=bytes_req:sort=bytes_req.descending:size=2048 [active]
+
+ { call_site: [ffffffffa046041c] i915_gem_execbuffer2+0x6c/0x2c0 [i915] } hitcount: 4569 bytes_req: 3163720
+ { call_site: [ffffffffa0489a66] intel_ring_begin+0xc6/0x1f0 [i915] } hitcount: 4569 bytes_req: 657936
+ { call_site: [ffffffffa045e7c4] i915_gem_do_execbuffer.isra.23+0x694/0x1020 [i915] } hitcount: 1519 bytes_req: 472936
+ { call_site: [ffffffffa045e646] i915_gem_do_execbuffer.isra.23+0x516/0x1020 [i915] } hitcount: 3050 bytes_req: 211832
+ { call_site: [ffffffff811e2a1b] seq_buf_alloc+0x1b/0x50 } hitcount: 34 bytes_req: 148384
+ { call_site: [ffffffffa04a580c] intel_crtc_page_flip+0xbc/0x870 [i915] } hitcount: 1385 bytes_req: 144040
+ { call_site: [ffffffff811ae8e1] __kmalloc+0x191/0x1b0 } hitcount: 8 bytes_req: 131072
+ { call_site: [ffffffffa0287592] drm_mode_page_flip_ioctl+0x282/0x360 [drm] } hitcount: 1385 bytes_req: 121880
+ { call_site: [ffffffffa02911f2] drm_modeset_lock_crtc+0x32/0x100 [drm] } hitcount: 1848 bytes_req: 103488
+ { call_site: [ffffffffa04c4a3c] intel_plane_duplicate_state+0x2c/0xa0 [i915] } hitcount: 461 bytes_req: 62696
+ { call_site: [ffffffffa029070e] drm_vma_node_allow+0x2e/0xd0 [drm] } hitcount: 1541 bytes_req: 61640
+ { call_site: [ffffffff815f8d7b] sk_prot_alloc+0xcb/0x1b0 } hitcount: 57 bytes_req: 57456
+ .
+ .
+ .
+ { call_site: [ffffffff8109524a] alloc_fair_sched_group+0x5a/0x1a0 } hitcount: 2 bytes_req: 128
+ { call_site: [ffffffffa027b921] drm_vm_open_locked+0x31/0xa0 [drm] } hitcount: 3 bytes_req: 96
+ { call_site: [ffffffff8122e266] proc_self_follow_link+0x76/0xb0 } hitcount: 8 bytes_req: 96
+ { call_site: [ffffffff81213e80] load_elf_binary+0x240/0x1650 } hitcount: 3 bytes_req: 84
+ { call_site: [ffffffff8154bc62] usb_control_msg+0x42/0x110 } hitcount: 1 bytes_req: 8
+ { call_site: [ffffffffa00bf6fe] hidraw_send_report+0x7e/0x1a0 [hid] } hitcount: 1 bytes_req: 7
+ { call_site: [ffffffffa00bf1ca] hidraw_report_event+0x8a/0x120 [hid] } hitcount: 1 bytes_req: 7
+
+ Totals:
+ Hits: 26098
+ Entries: 64
+ Dropped: 0
+
+ We can also add multiple fields to the 'values' parameter. For
+ example, we might want to see the total number of bytes allocated
+ alongside bytes requested, and display the result sorted by bytes
+ allocated in a descending order::
+
+ # echo 'hist:keys=call_site.sym:values=bytes_req,bytes_alloc:sort=bytes_alloc.descending' > \
+ /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
+
+ # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist
+ # trigger info: hist:keys=call_site.sym:vals=bytes_req,bytes_alloc:sort=bytes_alloc.descending:size=2048 [active]
+
+ { call_site: [ffffffffa046041c] i915_gem_execbuffer2 [i915] } hitcount: 7403 bytes_req: 4084360 bytes_alloc: 5958016
+ { call_site: [ffffffff811e2a1b] seq_buf_alloc } hitcount: 541 bytes_req: 2213968 bytes_alloc: 2228224
+ { call_site: [ffffffffa0489a66] intel_ring_begin [i915] } hitcount: 7404 bytes_req: 1066176 bytes_alloc: 1421568
+ { call_site: [ffffffffa045e7c4] i915_gem_do_execbuffer.isra.23 [i915] } hitcount: 1565 bytes_req: 557368 bytes_alloc: 1037760
+ { call_site: [ffffffff8125847d] ext4_htree_store_dirent } hitcount: 9557 bytes_req: 595778 bytes_alloc: 695744
+ { call_site: [ffffffffa045e646] i915_gem_do_execbuffer.isra.23 [i915] } hitcount: 5839 bytes_req: 430680 bytes_alloc: 470400
+ { call_site: [ffffffffa04c4a3c] intel_plane_duplicate_state [i915] } hitcount: 2388 bytes_req: 324768 bytes_alloc: 458496
+ { call_site: [ffffffffa02911f2] drm_modeset_lock_crtc [drm] } hitcount: 3911 bytes_req: 219016 bytes_alloc: 250304
+ { call_site: [ffffffff815f8d7b] sk_prot_alloc } hitcount: 235 bytes_req: 236880 bytes_alloc: 240640
+ { call_site: [ffffffff8137e559] sg_kmalloc } hitcount: 557 bytes_req: 169024 bytes_alloc: 221760
+ { call_site: [ffffffffa00b7c06] hid_report_raw_event [hid] } hitcount: 9378 bytes_req: 187548 bytes_alloc: 206312
+ { call_site: [ffffffffa04a580c] intel_crtc_page_flip [i915] } hitcount: 1519 bytes_req: 157976 bytes_alloc: 194432
+ .
+ .
+ .
+ { call_site: [ffffffff8109bd3b] sched_autogroup_create_attach } hitcount: 2 bytes_req: 144 bytes_alloc: 192
+ { call_site: [ffffffff81097ee8] alloc_rt_sched_group } hitcount: 2 bytes_req: 128 bytes_alloc: 128
+ { call_site: [ffffffff8109524a] alloc_fair_sched_group } hitcount: 2 bytes_req: 128 bytes_alloc: 128
+ { call_site: [ffffffff81095225] alloc_fair_sched_group } hitcount: 2 bytes_req: 128 bytes_alloc: 128
+ { call_site: [ffffffff81097ec2] alloc_rt_sched_group } hitcount: 2 bytes_req: 128 bytes_alloc: 128
+ { call_site: [ffffffff81213e80] load_elf_binary } hitcount: 3 bytes_req: 84 bytes_alloc: 96
+ { call_site: [ffffffff81079a2e] kthread_create_on_node } hitcount: 1 bytes_req: 56 bytes_alloc: 64
+ { call_site: [ffffffffa00bf6fe] hidraw_send_report [hid] } hitcount: 1 bytes_req: 7 bytes_alloc: 8
+ { call_site: [ffffffff8154bc62] usb_control_msg } hitcount: 1 bytes_req: 8 bytes_alloc: 8
+ { call_site: [ffffffffa00bf1ca] hidraw_report_event [hid] } hitcount: 1 bytes_req: 7 bytes_alloc: 8
+
+ Totals:
+ Hits: 66598
+ Entries: 65
+ Dropped: 0
+
+ Finally, to finish off our kmalloc example, instead of simply having
+ the hist trigger display symbolic call_sites, we can have the hist
+ trigger additionally display the complete set of kernel stack traces
+ that led to each call_site. To do that, we simply use the special
+ value 'stacktrace' for the key parameter::
+
+ # echo 'hist:keys=stacktrace:values=bytes_req,bytes_alloc:sort=bytes_alloc' > \
+ /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
+
+ The above trigger will use the kernel stack trace in effect when an
+ event is triggered as the key for the hash table. This allows the
+ enumeration of every kernel callpath that led up to a particular
+ event, along with a running total of any of the event fields for
+ that event. Here we tally bytes requested and bytes allocated for
+ every callpath in the system that led up to a kmalloc (in this case
+ every callpath to a kmalloc for a kernel compile)::
+
+ # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist
+ # trigger info: hist:keys=stacktrace:vals=bytes_req,bytes_alloc:sort=bytes_alloc:size=2048 [active]
+
+ { stacktrace:
+ __kmalloc_track_caller+0x10b/0x1a0
+ kmemdup+0x20/0x50
+ hidraw_report_event+0x8a/0x120 [hid]
+ hid_report_raw_event+0x3ea/0x440 [hid]
+ hid_input_report+0x112/0x190 [hid]
+ hid_irq_in+0xc2/0x260 [usbhid]
+ __usb_hcd_giveback_urb+0x72/0x120
+ usb_giveback_urb_bh+0x9e/0xe0
+ tasklet_hi_action+0xf8/0x100
+ __do_softirq+0x114/0x2c0
+ irq_exit+0xa5/0xb0
+ do_IRQ+0x5a/0xf0
+ ret_from_intr+0x0/0x30
+ cpuidle_enter+0x17/0x20
+ cpu_startup_entry+0x315/0x3e0
+ rest_init+0x7c/0x80
+ } hitcount: 3 bytes_req: 21 bytes_alloc: 24
+ { stacktrace:
+ __kmalloc_track_caller+0x10b/0x1a0
+ kmemdup+0x20/0x50
+ hidraw_report_event+0x8a/0x120 [hid]
+ hid_report_raw_event+0x3ea/0x440 [hid]
+ hid_input_report+0x112/0x190 [hid]
+ hid_irq_in+0xc2/0x260 [usbhid]
+ __usb_hcd_giveback_urb+0x72/0x120
+ usb_giveback_urb_bh+0x9e/0xe0
+ tasklet_hi_action+0xf8/0x100
+ __do_softirq+0x114/0x2c0
+ irq_exit+0xa5/0xb0
+ do_IRQ+0x5a/0xf0
+ ret_from_intr+0x0/0x30
+ } hitcount: 3 bytes_req: 21 bytes_alloc: 24
+ { stacktrace:
+ kmem_cache_alloc_trace+0xeb/0x150
+ aa_alloc_task_context+0x27/0x40
+ apparmor_cred_prepare+0x1f/0x50
+ security_prepare_creds+0x16/0x20
+ prepare_creds+0xdf/0x1a0
+ SyS_capset+0xb5/0x200
+ system_call_fastpath+0x12/0x6a
+ } hitcount: 1 bytes_req: 32 bytes_alloc: 32
+ .
+ .
+ .
+ { stacktrace:
+ __kmalloc+0x11b/0x1b0
+ i915_gem_execbuffer2+0x6c/0x2c0 [i915]
+ drm_ioctl+0x349/0x670 [drm]
+ do_vfs_ioctl+0x2f0/0x4f0
+ SyS_ioctl+0x81/0xa0
+ system_call_fastpath+0x12/0x6a
+ } hitcount: 17726 bytes_req: 13944120 bytes_alloc: 19593808
+ { stacktrace:
+ __kmalloc+0x11b/0x1b0
+ load_elf_phdrs+0x76/0xa0
+ load_elf_binary+0x102/0x1650
+ search_binary_handler+0x97/0x1d0
+ do_execveat_common.isra.34+0x551/0x6e0
+ SyS_execve+0x3a/0x50
+ return_from_execve+0x0/0x23
+ } hitcount: 33348 bytes_req: 17152128 bytes_alloc: 20226048
+ { stacktrace:
+ kmem_cache_alloc_trace+0xeb/0x150
+ apparmor_file_alloc_security+0x27/0x40
+ security_file_alloc+0x16/0x20
+ get_empty_filp+0x93/0x1c0
+ path_openat+0x31/0x5f0
+ do_filp_open+0x3a/0x90
+ do_sys_open+0x128/0x220
+ SyS_open+0x1e/0x20
+ system_call_fastpath+0x12/0x6a
+ } hitcount: 4766422 bytes_req: 9532844 bytes_alloc: 38131376
+ { stacktrace:
+ __kmalloc+0x11b/0x1b0
+ seq_buf_alloc+0x1b/0x50
+ seq_read+0x2cc/0x370
+ proc_reg_read+0x3d/0x80
+ __vfs_read+0x28/0xe0
+ vfs_read+0x86/0x140
+ SyS_read+0x46/0xb0
+ system_call_fastpath+0x12/0x6a
+ } hitcount: 19133 bytes_req: 78368768 bytes_alloc: 78368768
+
+ Totals:
+ Hits: 6085872
+ Entries: 253
+ Dropped: 0
+
+ If you key a hist trigger on common_pid, in order for example to
+ gather and display sorted totals for each process, you can use the
+ special .execname modifier to display the executable names for the
+ processes in the table rather than raw pids. The example below
+ keeps a per-process sum of total bytes read::
+
+ # echo 'hist:key=common_pid.execname:val=count:sort=count.descending' > \
+ /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger
+
+ # cat /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/hist
+ # trigger info: hist:keys=common_pid.execname:vals=count:sort=count.descending:size=2048 [active]
+
+ { common_pid: gnome-terminal [ 3196] } hitcount: 280 count: 1093512
+ { common_pid: Xorg [ 1309] } hitcount: 525 count: 256640
+ { common_pid: compiz [ 2889] } hitcount: 59 count: 254400
+ { common_pid: bash [ 8710] } hitcount: 3 count: 66369
+ { common_pid: dbus-daemon-lau [ 8703] } hitcount: 49 count: 47739
+ { common_pid: irqbalance [ 1252] } hitcount: 27 count: 27648
+ { common_pid: 01ifupdown [ 8705] } hitcount: 3 count: 17216
+ { common_pid: dbus-daemon [ 772] } hitcount: 10 count: 12396
+ { common_pid: Socket Thread [ 8342] } hitcount: 11 count: 11264
+ { common_pid: nm-dhcp-client. [ 8701] } hitcount: 6 count: 7424
+ { common_pid: gmain [ 1315] } hitcount: 18 count: 6336
+ .
+ .
+ .
+ { common_pid: postgres [ 1892] } hitcount: 2 count: 32
+ { common_pid: postgres [ 1891] } hitcount: 2 count: 32
+ { common_pid: gmain [ 8704] } hitcount: 2 count: 32
+ { common_pid: upstart-dbus-br [ 2740] } hitcount: 21 count: 21
+ { common_pid: nm-dispatcher.a [ 8696] } hitcount: 1 count: 16
+ { common_pid: indicator-datet [ 2904] } hitcount: 1 count: 16
+ { common_pid: gdbus [ 2998] } hitcount: 1 count: 16
+ { common_pid: rtkit-daemon [ 2052] } hitcount: 1 count: 8
+ { common_pid: init [ 1] } hitcount: 2 count: 2
+
+ Totals:
+ Hits: 2116
+ Entries: 51
+ Dropped: 0
+
+ Similarly, if you key a hist trigger on syscall id, for example to
+ gather and display a list of systemwide syscall hits, you can use
+ the special .syscall modifier to display the syscall names rather
+ than raw ids. The example below keeps a running total of syscall
+ counts for the system during the run::
+
+ # echo 'hist:key=id.syscall:val=hitcount' > \
+ /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger
+
+ # cat /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/hist
+ # trigger info: hist:keys=id.syscall:vals=hitcount:sort=hitcount:size=2048 [active]
+
+ { id: sys_fsync [ 74] } hitcount: 1
+ { id: sys_newuname [ 63] } hitcount: 1
+ { id: sys_prctl [157] } hitcount: 1
+ { id: sys_statfs [137] } hitcount: 1
+ { id: sys_symlink [ 88] } hitcount: 1
+ { id: sys_sendmmsg [307] } hitcount: 1
+ { id: sys_semctl [ 66] } hitcount: 1
+ { id: sys_readlink [ 89] } hitcount: 3
+ { id: sys_bind [ 49] } hitcount: 3
+ { id: sys_getsockname [ 51] } hitcount: 3
+ { id: sys_unlink [ 87] } hitcount: 3
+ { id: sys_rename [ 82] } hitcount: 4
+ { id: unknown_syscall [ 58] } hitcount: 4
+ { id: sys_connect [ 42] } hitcount: 4
+ { id: sys_getpid [ 39] } hitcount: 4
+ .
+ .
+ .
+ { id: sys_rt_sigprocmask [ 14] } hitcount: 952
+ { id: sys_futex [202] } hitcount: 1534
+ { id: sys_write [ 1] } hitcount: 2689
+ { id: sys_setitimer [ 38] } hitcount: 2797
+ { id: sys_read [ 0] } hitcount: 3202
+ { id: sys_select [ 23] } hitcount: 3773
+ { id: sys_writev [ 20] } hitcount: 4531
+ { id: sys_poll [ 7] } hitcount: 8314
+ { id: sys_recvmsg [ 47] } hitcount: 13738
+ { id: sys_ioctl [ 16] } hitcount: 21843
+
+ Totals:
+ Hits: 67612
+ Entries: 72
+ Dropped: 0
+
+ The syscall counts above provide a rough overall picture of system
+ call activity on the system; we can see for example that the most
+ popular system call on this system was the 'sys_ioctl' system call.
+
+ We can use 'compound' keys to refine that number and provide some
+ further insight as to which processes exactly contribute to the
+ overall ioctl count.
+
+ The command below keeps a hitcount for every unique combination of
+ system call id and pid - the end result is essentially a table
+ that keeps a per-pid sum of system call hits. The results are
+ sorted using the system call id as the primary key, and the
+ hitcount sum as the secondary key::
+
+ # echo 'hist:key=id.syscall,common_pid.execname:val=hitcount:sort=id,hitcount' > \
+ /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger
+
+ # cat /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/hist
+ # trigger info: hist:keys=id.syscall,common_pid.execname:vals=hitcount:sort=id.syscall,hitcount:size=2048 [active]
+
+ { id: sys_read [ 0], common_pid: rtkit-daemon [ 1877] } hitcount: 1
+ { id: sys_read [ 0], common_pid: gdbus [ 2976] } hitcount: 1
+ { id: sys_read [ 0], common_pid: console-kit-dae [ 3400] } hitcount: 1
+ { id: sys_read [ 0], common_pid: postgres [ 1865] } hitcount: 1
+ { id: sys_read [ 0], common_pid: deja-dup-monito [ 3543] } hitcount: 2
+ { id: sys_read [ 0], common_pid: NetworkManager [ 890] } hitcount: 2
+ { id: sys_read [ 0], common_pid: evolution-calen [ 3048] } hitcount: 2
+ { id: sys_read [ 0], common_pid: postgres [ 1864] } hitcount: 2
+ { id: sys_read [ 0], common_pid: nm-applet [ 3022] } hitcount: 2
+ { id: sys_read [ 0], common_pid: whoopsie [ 1212] } hitcount: 2
+ .
+ .
+ .
+ { id: sys_ioctl [ 16], common_pid: bash [ 8479] } hitcount: 1
+ { id: sys_ioctl [ 16], common_pid: bash [ 3472] } hitcount: 12
+ { id: sys_ioctl [ 16], common_pid: gnome-terminal [ 3199] } hitcount: 16
+ { id: sys_ioctl [ 16], common_pid: Xorg [ 1267] } hitcount: 1808
+ { id: sys_ioctl [ 16], common_pid: compiz [ 2994] } hitcount: 5580
+ .
+ .
+ .
+ { id: sys_waitid [247], common_pid: upstart-dbus-br [ 2690] } hitcount: 3
+ { id: sys_waitid [247], common_pid: upstart-dbus-br [ 2688] } hitcount: 16
+ { id: sys_inotify_add_watch [254], common_pid: gmain [ 975] } hitcount: 2
+ { id: sys_inotify_add_watch [254], common_pid: gmain [ 3204] } hitcount: 4
+ { id: sys_inotify_add_watch [254], common_pid: gmain [ 2888] } hitcount: 4
+ { id: sys_inotify_add_watch [254], common_pid: gmain [ 3003] } hitcount: 4
+ { id: sys_inotify_add_watch [254], common_pid: gmain [ 2873] } hitcount: 4
+ { id: sys_inotify_add_watch [254], common_pid: gmain [ 3196] } hitcount: 6
+ { id: sys_openat [257], common_pid: java [ 2623] } hitcount: 2
+ { id: sys_eventfd2 [290], common_pid: ibus-ui-gtk3 [ 2760] } hitcount: 4
+ { id: sys_eventfd2 [290], common_pid: compiz [ 2994] } hitcount: 6
+
+ Totals:
+ Hits: 31536
+ Entries: 323
+ Dropped: 0
+
+ The above list does give us a breakdown of the ioctl syscall by
+ pid, but it also gives us quite a bit more than that, which we
+ don't really care about at the moment. Since we know the syscall
+ id for sys_ioctl (16, displayed next to the sys_ioctl name), we
+ can use that to filter out all the other syscalls::
+
+ # echo 'hist:key=id.syscall,common_pid.execname:val=hitcount:sort=id,hitcount if id == 16' > \
+ /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger
+
+ # cat /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/hist
+ # trigger info: hist:keys=id.syscall,common_pid.execname:vals=hitcount:sort=id.syscall,hitcount:size=2048 if id == 16 [active]
+
+ { id: sys_ioctl [ 16], common_pid: gmain [ 2769] } hitcount: 1
+ { id: sys_ioctl [ 16], common_pid: evolution-addre [ 8571] } hitcount: 1
+ { id: sys_ioctl [ 16], common_pid: gmain [ 3003] } hitcount: 1
+ { id: sys_ioctl [ 16], common_pid: gmain [ 2781] } hitcount: 1
+ { id: sys_ioctl [ 16], common_pid: gmain [ 2829] } hitcount: 1
+ { id: sys_ioctl [ 16], common_pid: bash [ 8726] } hitcount: 1
+ { id: sys_ioctl [ 16], common_pid: bash [ 8508] } hitcount: 1
+ { id: sys_ioctl [ 16], common_pid: gmain [ 2970] } hitcount: 1
+ { id: sys_ioctl [ 16], common_pid: gmain [ 2768] } hitcount: 1
+ .
+ .
+ .
+ { id: sys_ioctl [ 16], common_pid: pool [ 8559] } hitcount: 45
+ { id: sys_ioctl [ 16], common_pid: pool [ 8555] } hitcount: 48
+ { id: sys_ioctl [ 16], common_pid: pool [ 8551] } hitcount: 48
+ { id: sys_ioctl [ 16], common_pid: avahi-daemon [ 896] } hitcount: 66
+ { id: sys_ioctl [ 16], common_pid: Xorg [ 1267] } hitcount: 26674
+ { id: sys_ioctl [ 16], common_pid: compiz [ 2994] } hitcount: 73443
+
+ Totals:
+ Hits: 101162
+ Entries: 103
+ Dropped: 0
+
+ The above output shows that 'compiz' and 'Xorg' are far and away
+ the heaviest ioctl callers (which might lead to questions about
+ whether they really need to be making all those calls and to
+ possible avenues for further investigation.)
+
+ The compound key examples used a key and a sum value (hitcount) to
+ sort the output, but we can just as easily use two keys instead.
+ Here's an example where we use a compound key composed of the the
+ common_pid and size event fields. Sorting with pid as the primary
+ key and 'size' as the secondary key allows us to display an
+ ordered summary of the recvfrom sizes, with counts, received by
+ each process::
+
+ # echo 'hist:key=common_pid.execname,size:val=hitcount:sort=common_pid,size' > \
+ /sys/kernel/debug/tracing/events/syscalls/sys_enter_recvfrom/trigger
+
+ # cat /sys/kernel/debug/tracing/events/syscalls/sys_enter_recvfrom/hist
+ # trigger info: hist:keys=common_pid.execname,size:vals=hitcount:sort=common_pid.execname,size:size=2048 [active]
+
+ { common_pid: smbd [ 784], size: 4 } hitcount: 1
+ { common_pid: dnsmasq [ 1412], size: 4096 } hitcount: 672
+ { common_pid: postgres [ 1796], size: 1000 } hitcount: 6
+ { common_pid: postgres [ 1867], size: 1000 } hitcount: 10
+ { common_pid: bamfdaemon [ 2787], size: 28 } hitcount: 2
+ { common_pid: bamfdaemon [ 2787], size: 14360 } hitcount: 1
+ { common_pid: compiz [ 2994], size: 8 } hitcount: 1
+ { common_pid: compiz [ 2994], size: 20 } hitcount: 11
+ { common_pid: gnome-terminal [ 3199], size: 4 } hitcount: 2
+ { common_pid: firefox [ 8817], size: 4 } hitcount: 1
+ { common_pid: firefox [ 8817], size: 8 } hitcount: 5
+ { common_pid: firefox [ 8817], size: 588 } hitcount: 2
+ { common_pid: firefox [ 8817], size: 628 } hitcount: 1
+ { common_pid: firefox [ 8817], size: 6944 } hitcount: 1
+ { common_pid: firefox [ 8817], size: 408880 } hitcount: 2
+ { common_pid: firefox [ 8822], size: 8 } hitcount: 2
+ { common_pid: firefox [ 8822], size: 160 } hitcount: 2
+ { common_pid: firefox [ 8822], size: 320 } hitcount: 2
+ { common_pid: firefox [ 8822], size: 352 } hitcount: 1
+ .
+ .
+ .
+ { common_pid: pool [ 8923], size: 1960 } hitcount: 10
+ { common_pid: pool [ 8923], size: 2048 } hitcount: 10
+ { common_pid: pool [ 8924], size: 1960 } hitcount: 10
+ { common_pid: pool [ 8924], size: 2048 } hitcount: 10
+ { common_pid: pool [ 8928], size: 1964 } hitcount: 4
+ { common_pid: pool [ 8928], size: 1965 } hitcount: 2
+ { common_pid: pool [ 8928], size: 2048 } hitcount: 6
+ { common_pid: pool [ 8929], size: 1982 } hitcount: 1
+ { common_pid: pool [ 8929], size: 2048 } hitcount: 1
+
+ Totals:
+ Hits: 2016
+ Entries: 224
+ Dropped: 0
+
+ The above example also illustrates the fact that although a compound
+ key is treated as a single entity for hashing purposes, the sub-keys
+ it's composed of can be accessed independently.
+
+ The next example uses a string field as the hash key and
+ demonstrates how you can manually pause and continue a hist trigger.
+ In this example, we'll aggregate fork counts and don't expect a
+ large number of entries in the hash table, so we'll drop it to a
+ much smaller number, say 256::
+
+ # echo 'hist:key=child_comm:val=hitcount:size=256' > \
+ /sys/kernel/debug/tracing/events/sched/sched_process_fork/trigger
+
+ # cat /sys/kernel/debug/tracing/events/sched/sched_process_fork/hist
+ # trigger info: hist:keys=child_comm:vals=hitcount:sort=hitcount:size=256 [active]
+
+ { child_comm: dconf worker } hitcount: 1
+ { child_comm: ibus-daemon } hitcount: 1
+ { child_comm: whoopsie } hitcount: 1
+ { child_comm: smbd } hitcount: 1
+ { child_comm: gdbus } hitcount: 1
+ { child_comm: kthreadd } hitcount: 1
+ { child_comm: dconf worker } hitcount: 1
+ { child_comm: evolution-alarm } hitcount: 2
+ { child_comm: Socket Thread } hitcount: 2
+ { child_comm: postgres } hitcount: 2
+ { child_comm: bash } hitcount: 3
+ { child_comm: compiz } hitcount: 3
+ { child_comm: evolution-sourc } hitcount: 4
+ { child_comm: dhclient } hitcount: 4
+ { child_comm: pool } hitcount: 5
+ { child_comm: nm-dispatcher.a } hitcount: 8
+ { child_comm: firefox } hitcount: 8
+ { child_comm: dbus-daemon } hitcount: 8
+ { child_comm: glib-pacrunner } hitcount: 10
+ { child_comm: evolution } hitcount: 23
+
+ Totals:
+ Hits: 89
+ Entries: 20
+ Dropped: 0
+
+ If we want to pause the hist trigger, we can simply append :pause to
+ the command that started the trigger. Notice that the trigger info
+ displays as [paused]::
+
+ # echo 'hist:key=child_comm:val=hitcount:size=256:pause' >> \
+ /sys/kernel/debug/tracing/events/sched/sched_process_fork/trigger
+
+ # cat /sys/kernel/debug/tracing/events/sched/sched_process_fork/hist
+ # trigger info: hist:keys=child_comm:vals=hitcount:sort=hitcount:size=256 [paused]
+
+ { child_comm: dconf worker } hitcount: 1
+ { child_comm: kthreadd } hitcount: 1
+ { child_comm: dconf worker } hitcount: 1
+ { child_comm: gdbus } hitcount: 1
+ { child_comm: ibus-daemon } hitcount: 1
+ { child_comm: Socket Thread } hitcount: 2
+ { child_comm: evolution-alarm } hitcount: 2
+ { child_comm: smbd } hitcount: 2
+ { child_comm: bash } hitcount: 3
+ { child_comm: whoopsie } hitcount: 3
+ { child_comm: compiz } hitcount: 3
+ { child_comm: evolution-sourc } hitcount: 4
+ { child_comm: pool } hitcount: 5
+ { child_comm: postgres } hitcount: 6
+ { child_comm: firefox } hitcount: 8
+ { child_comm: dhclient } hitcount: 10
+ { child_comm: emacs } hitcount: 12
+ { child_comm: dbus-daemon } hitcount: 20
+ { child_comm: nm-dispatcher.a } hitcount: 20
+ { child_comm: evolution } hitcount: 35
+ { child_comm: glib-pacrunner } hitcount: 59
+
+ Totals:
+ Hits: 199
+ Entries: 21
+ Dropped: 0
+
+ To manually continue having the trigger aggregate events, append
+ :cont instead. Notice that the trigger info displays as [active]
+ again, and the data has changed::
+
+ # echo 'hist:key=child_comm:val=hitcount:size=256:cont' >> \
+ /sys/kernel/debug/tracing/events/sched/sched_process_fork/trigger
+
+ # cat /sys/kernel/debug/tracing/events/sched/sched_process_fork/hist
+ # trigger info: hist:keys=child_comm:vals=hitcount:sort=hitcount:size=256 [active]
+
+ { child_comm: dconf worker } hitcount: 1
+ { child_comm: dconf worker } hitcount: 1
+ { child_comm: kthreadd } hitcount: 1
+ { child_comm: gdbus } hitcount: 1
+ { child_comm: ibus-daemon } hitcount: 1
+ { child_comm: Socket Thread } hitcount: 2
+ { child_comm: evolution-alarm } hitcount: 2
+ { child_comm: smbd } hitcount: 2
+ { child_comm: whoopsie } hitcount: 3
+ { child_comm: compiz } hitcount: 3
+ { child_comm: evolution-sourc } hitcount: 4
+ { child_comm: bash } hitcount: 5
+ { child_comm: pool } hitcount: 5
+ { child_comm: postgres } hitcount: 6
+ { child_comm: firefox } hitcount: 8
+ { child_comm: dhclient } hitcount: 11
+ { child_comm: emacs } hitcount: 12
+ { child_comm: dbus-daemon } hitcount: 22
+ { child_comm: nm-dispatcher.a } hitcount: 22
+ { child_comm: evolution } hitcount: 35
+ { child_comm: glib-pacrunner } hitcount: 59
+
+ Totals:
+ Hits: 206
+ Entries: 21
+ Dropped: 0
+
+ The previous example showed how to start and stop a hist trigger by
+ appending 'pause' and 'continue' to the hist trigger command. A
+ hist trigger can also be started in a paused state by initially
+ starting the trigger with ':pause' appended. This allows you to
+ start the trigger only when you're ready to start collecting data
+ and not before. For example, you could start the trigger in a
+ paused state, then unpause it and do something you want to measure,
+ then pause the trigger again when done.
+
+ Of course, doing this manually can be difficult and error-prone, but
+ it is possible to automatically start and stop a hist trigger based
+ on some condition, via the enable_hist and disable_hist triggers.
+
+ For example, suppose we wanted to take a look at the relative
+ weights in terms of skb length for each callpath that leads to a
+ netif_receieve_skb event when downloading a decent-sized file using
+ wget.
+
+ First we set up an initially paused stacktrace trigger on the
+ netif_receive_skb event::
+
+ # echo 'hist:key=stacktrace:vals=len:pause' > \
+ /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger
+
+ Next, we set up an 'enable_hist' trigger on the sched_process_exec
+ event, with an 'if filename==/usr/bin/wget' filter. The effect of
+ this new trigger is that it will 'unpause' the hist trigger we just
+ set up on netif_receive_skb if and only if it sees a
+ sched_process_exec event with a filename of '/usr/bin/wget'. When
+ that happens, all netif_receive_skb events are aggregated into a
+ hash table keyed on stacktrace::
+
+ # echo 'enable_hist:net:netif_receive_skb if filename==/usr/bin/wget' > \
+ /sys/kernel/debug/tracing/events/sched/sched_process_exec/trigger
+
+ The aggregation continues until the netif_receive_skb is paused
+ again, which is what the following disable_hist event does by
+ creating a similar setup on the sched_process_exit event, using the
+ filter 'comm==wget'::
+
+ # echo 'disable_hist:net:netif_receive_skb if comm==wget' > \
+ /sys/kernel/debug/tracing/events/sched/sched_process_exit/trigger
+
+ Whenever a process exits and the comm field of the disable_hist
+ trigger filter matches 'comm==wget', the netif_receive_skb hist
+ trigger is disabled.
+
+ The overall effect is that netif_receive_skb events are aggregated
+ into the hash table for only the duration of the wget. Executing a
+ wget command and then listing the 'hist' file will display the
+ output generated by the wget command::
+
+ $ wget https://www.kernel.org/pub/linux/kernel/v3.x/patch-3.19.xz
+
+ # cat /sys/kernel/debug/tracing/events/net/netif_receive_skb/hist
+ # trigger info: hist:keys=stacktrace:vals=len:sort=hitcount:size=2048 [paused]
+
+ { stacktrace:
+ __netif_receive_skb_core+0x46d/0x990
+ __netif_receive_skb+0x18/0x60
+ netif_receive_skb_internal+0x23/0x90
+ napi_gro_receive+0xc8/0x100
+ ieee80211_deliver_skb+0xd6/0x270 [mac80211]
+ ieee80211_rx_handlers+0xccf/0x22f0 [mac80211]
+ ieee80211_prepare_and_rx_handle+0x4e7/0xc40 [mac80211]
+ ieee80211_rx+0x31d/0x900 [mac80211]
+ iwlagn_rx_reply_rx+0x3db/0x6f0 [iwldvm]
+ iwl_rx_dispatch+0x8e/0xf0 [iwldvm]
+ iwl_pcie_irq_handler+0xe3c/0x12f0 [iwlwifi]
+ irq_thread_fn+0x20/0x50
+ irq_thread+0x11f/0x150
+ kthread+0xd2/0xf0
+ ret_from_fork+0x42/0x70
+ } hitcount: 85 len: 28884
+ { stacktrace:
+ __netif_receive_skb_core+0x46d/0x990
+ __netif_receive_skb+0x18/0x60
+ netif_receive_skb_internal+0x23/0x90
+ napi_gro_complete+0xa4/0xe0
+ dev_gro_receive+0x23a/0x360
+ napi_gro_receive+0x30/0x100
+ ieee80211_deliver_skb+0xd6/0x270 [mac80211]
+ ieee80211_rx_handlers+0xccf/0x22f0 [mac80211]
+ ieee80211_prepare_and_rx_handle+0x4e7/0xc40 [mac80211]
+ ieee80211_rx+0x31d/0x900 [mac80211]
+ iwlagn_rx_reply_rx+0x3db/0x6f0 [iwldvm]
+ iwl_rx_dispatch+0x8e/0xf0 [iwldvm]
+ iwl_pcie_irq_handler+0xe3c/0x12f0 [iwlwifi]
+ irq_thread_fn+0x20/0x50
+ irq_thread+0x11f/0x150
+ kthread+0xd2/0xf0
+ } hitcount: 98 len: 664329
+ { stacktrace:
+ __netif_receive_skb_core+0x46d/0x990
+ __netif_receive_skb+0x18/0x60
+ process_backlog+0xa8/0x150
+ net_rx_action+0x15d/0x340
+ __do_softirq+0x114/0x2c0
+ do_softirq_own_stack+0x1c/0x30
+ do_softirq+0x65/0x70
+ __local_bh_enable_ip+0xb5/0xc0
+ ip_finish_output+0x1f4/0x840
+ ip_output+0x6b/0xc0
+ ip_local_out_sk+0x31/0x40
+ ip_send_skb+0x1a/0x50
+ udp_send_skb+0x173/0x2a0
+ udp_sendmsg+0x2bf/0x9f0
+ inet_sendmsg+0x64/0xa0
+ sock_sendmsg+0x3d/0x50
+ } hitcount: 115 len: 13030
+ { stacktrace:
+ __netif_receive_skb_core+0x46d/0x990
+ __netif_receive_skb+0x18/0x60
+ netif_receive_skb_internal+0x23/0x90
+ napi_gro_complete+0xa4/0xe0
+ napi_gro_flush+0x6d/0x90
+ iwl_pcie_irq_handler+0x92a/0x12f0 [iwlwifi]
+ irq_thread_fn+0x20/0x50
+ irq_thread+0x11f/0x150
+ kthread+0xd2/0xf0
+ ret_from_fork+0x42/0x70
+ } hitcount: 934 len: 5512212
+
+ Totals:
+ Hits: 1232
+ Entries: 4
+ Dropped: 0
+
+ The above shows all the netif_receive_skb callpaths and their total
+ lengths for the duration of the wget command.
+
+ The 'clear' hist trigger param can be used to clear the hash table.
+ Suppose we wanted to try another run of the previous example but
+ this time also wanted to see the complete list of events that went
+ into the histogram. In order to avoid having to set everything up
+ again, we can just clear the histogram first::
+
+ # echo 'hist:key=stacktrace:vals=len:clear' >> \
+ /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger
+
+ Just to verify that it is in fact cleared, here's what we now see in
+ the hist file::
+
+ # cat /sys/kernel/debug/tracing/events/net/netif_receive_skb/hist
+ # trigger info: hist:keys=stacktrace:vals=len:sort=hitcount:size=2048 [paused]
+
+ Totals:
+ Hits: 0
+ Entries: 0
+ Dropped: 0
+
+ Since we want to see the detailed list of every netif_receive_skb
+ event occurring during the new run, which are in fact the same
+ events being aggregated into the hash table, we add some additional
+ 'enable_event' events to the triggering sched_process_exec and
+ sched_process_exit events as such::
+
+ # echo 'enable_event:net:netif_receive_skb if filename==/usr/bin/wget' > \
+ /sys/kernel/debug/tracing/events/sched/sched_process_exec/trigger
+
+ # echo 'disable_event:net:netif_receive_skb if comm==wget' > \
+ /sys/kernel/debug/tracing/events/sched/sched_process_exit/trigger
+
+ If you read the trigger files for the sched_process_exec and
+ sched_process_exit triggers, you should see two triggers for each:
+ one enabling/disabling the hist aggregation and the other
+ enabling/disabling the logging of events::
+
+ # cat /sys/kernel/debug/tracing/events/sched/sched_process_exec/trigger
+ enable_event:net:netif_receive_skb:unlimited if filename==/usr/bin/wget
+ enable_hist:net:netif_receive_skb:unlimited if filename==/usr/bin/wget
+
+ # cat /sys/kernel/debug/tracing/events/sched/sched_process_exit/trigger
+ enable_event:net:netif_receive_skb:unlimited if comm==wget
+ disable_hist:net:netif_receive_skb:unlimited if comm==wget
+
+ In other words, whenever either of the sched_process_exec or
+ sched_process_exit events is hit and matches 'wget', it enables or
+ disables both the histogram and the event log, and what you end up
+ with is a hash table and set of events just covering the specified
+ duration. Run the wget command again::
+
+ $ wget https://www.kernel.org/pub/linux/kernel/v3.x/patch-3.19.xz
+
+ Displaying the 'hist' file should show something similar to what you
+ saw in the last run, but this time you should also see the
+ individual events in the trace file::
+
+ # cat /sys/kernel/debug/tracing/trace
+
+ # tracer: nop
+ #
+ # entries-in-buffer/entries-written: 183/1426 #P:4
+ #
+ # _-----=> irqs-off
+ # / _----=> need-resched
+ # | / _---=> hardirq/softirq
+ # || / _--=> preempt-depth
+ # ||| / delay
+ # TASK-PID CPU# |||| TIMESTAMP FUNCTION
+ # | | | |||| | |
+ wget-15108 [000] ..s1 31769.606929: netif_receive_skb: dev=lo skbaddr=ffff88009c353100 len=60
+ wget-15108 [000] ..s1 31769.606999: netif_receive_skb: dev=lo skbaddr=ffff88009c353200 len=60
+ dnsmasq-1382 [000] ..s1 31769.677652: netif_receive_skb: dev=lo skbaddr=ffff88009c352b00 len=130
+ dnsmasq-1382 [000] ..s1 31769.685917: netif_receive_skb: dev=lo skbaddr=ffff88009c352200 len=138
+ ##### CPU 2 buffer started ####
+ irq/29-iwlwifi-559 [002] ..s. 31772.031529: netif_receive_skb: dev=wlan0 skbaddr=ffff88009d433d00 len=2948
+ irq/29-iwlwifi-559 [002] ..s. 31772.031572: netif_receive_skb: dev=wlan0 skbaddr=ffff88009d432200 len=1500
+ irq/29-iwlwifi-559 [002] ..s. 31772.032196: netif_receive_skb: dev=wlan0 skbaddr=ffff88009d433100 len=2948
+ irq/29-iwlwifi-559 [002] ..s. 31772.032761: netif_receive_skb: dev=wlan0 skbaddr=ffff88009d433000 len=2948
+ irq/29-iwlwifi-559 [002] ..s. 31772.033220: netif_receive_skb: dev=wlan0 skbaddr=ffff88009d432e00 len=1500
+ ....
+
+
+ The following example demonstrates how multiple hist triggers can be
+ attached to a given event. This capability can be useful for
+ creating a set of different summaries derived from the same set of
+ events, or for comparing the effects of different filters, among
+ other things.
+ ::
+
+ # echo 'hist:keys=skbaddr.hex:vals=len if len < 0' >> \
+ /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger
+ # echo 'hist:keys=skbaddr.hex:vals=len if len > 4096' >> \
+ /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger
+ # echo 'hist:keys=skbaddr.hex:vals=len if len == 256' >> \
+ /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger
+ # echo 'hist:keys=skbaddr.hex:vals=len' >> \
+ /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger
+ # echo 'hist:keys=len:vals=common_preempt_count' >> \
+ /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger
+
+ The above set of commands create four triggers differing only in
+ their filters, along with a completely different though fairly
+ nonsensical trigger. Note that in order to append multiple hist
+ triggers to the same file, you should use the '>>' operator to
+ append them ('>' will also add the new hist trigger, but will remove
+ any existing hist triggers beforehand).
+
+ Displaying the contents of the 'hist' file for the event shows the
+ contents of all five histograms::
+
+ # cat /sys/kernel/debug/tracing/events/net/netif_receive_skb/hist
+
+ # event histogram
+ #
+ # trigger info: hist:keys=len:vals=hitcount,common_preempt_count:sort=hitcount:size=2048 [active]
+ #
+
+ { len: 176 } hitcount: 1 common_preempt_count: 0
+ { len: 223 } hitcount: 1 common_preempt_count: 0
+ { len: 4854 } hitcount: 1 common_preempt_count: 0
+ { len: 395 } hitcount: 1 common_preempt_count: 0
+ { len: 177 } hitcount: 1 common_preempt_count: 0
+ { len: 446 } hitcount: 1 common_preempt_count: 0
+ { len: 1601 } hitcount: 1 common_preempt_count: 0
+ .
+ .
+ .
+ { len: 1280 } hitcount: 66 common_preempt_count: 0
+ { len: 116 } hitcount: 81 common_preempt_count: 40
+ { len: 708 } hitcount: 112 common_preempt_count: 0
+ { len: 46 } hitcount: 221 common_preempt_count: 0
+ { len: 1264 } hitcount: 458 common_preempt_count: 0
+
+ Totals:
+ Hits: 1428
+ Entries: 147
+ Dropped: 0
+
+
+ # event histogram
+ #
+ # trigger info: hist:keys=skbaddr.hex:vals=hitcount,len:sort=hitcount:size=2048 [active]
+ #
+
+ { skbaddr: ffff8800baee5e00 } hitcount: 1 len: 130
+ { skbaddr: ffff88005f3d5600 } hitcount: 1 len: 1280
+ { skbaddr: ffff88005f3d4900 } hitcount: 1 len: 1280
+ { skbaddr: ffff88009fed6300 } hitcount: 1 len: 115
+ { skbaddr: ffff88009fe0ad00 } hitcount: 1 len: 115
+ { skbaddr: ffff88008cdb1900 } hitcount: 1 len: 46
+ { skbaddr: ffff880064b5ef00 } hitcount: 1 len: 118
+ { skbaddr: ffff880044e3c700 } hitcount: 1 len: 60
+ { skbaddr: ffff880100065900 } hitcount: 1 len: 46
+ { skbaddr: ffff8800d46bd500 } hitcount: 1 len: 116
+ { skbaddr: ffff88005f3d5f00 } hitcount: 1 len: 1280
+ { skbaddr: ffff880100064700 } hitcount: 1 len: 365
+ { skbaddr: ffff8800badb6f00 } hitcount: 1 len: 60
+ .
+ .
+ .
+ { skbaddr: ffff88009fe0be00 } hitcount: 27 len: 24677
+ { skbaddr: ffff88009fe0a400 } hitcount: 27 len: 23052
+ { skbaddr: ffff88009fe0b700 } hitcount: 31 len: 25589
+ { skbaddr: ffff88009fe0b600 } hitcount: 32 len: 27326
+ { skbaddr: ffff88006a462800 } hitcount: 68 len: 71678
+ { skbaddr: ffff88006a463700 } hitcount: 70 len: 72678
+ { skbaddr: ffff88006a462b00 } hitcount: 71 len: 77589
+ { skbaddr: ffff88006a463600 } hitcount: 73 len: 71307
+ { skbaddr: ffff88006a462200 } hitcount: 81 len: 81032
+
+ Totals:
+ Hits: 1451
+ Entries: 318
+ Dropped: 0
+
+
+ # event histogram
+ #
+ # trigger info: hist:keys=skbaddr.hex:vals=hitcount,len:sort=hitcount:size=2048 if len == 256 [active]
+ #
+
+
+ Totals:
+ Hits: 0
+ Entries: 0
+ Dropped: 0
+
+
+ # event histogram
+ #
+ # trigger info: hist:keys=skbaddr.hex:vals=hitcount,len:sort=hitcount:size=2048 if len > 4096 [active]
+ #
+
+ { skbaddr: ffff88009fd2c300 } hitcount: 1 len: 7212
+ { skbaddr: ffff8800d2bcce00 } hitcount: 1 len: 7212
+ { skbaddr: ffff8800d2bcd700 } hitcount: 1 len: 7212
+ { skbaddr: ffff8800d2bcda00 } hitcount: 1 len: 21492
+ { skbaddr: ffff8800ae2e2d00 } hitcount: 1 len: 7212
+ { skbaddr: ffff8800d2bcdb00 } hitcount: 1 len: 7212
+ { skbaddr: ffff88006a4df500 } hitcount: 1 len: 4854
+ { skbaddr: ffff88008ce47b00 } hitcount: 1 len: 18636
+ { skbaddr: ffff8800ae2e2200 } hitcount: 1 len: 12924
+ { skbaddr: ffff88005f3e1000 } hitcount: 1 len: 4356
+ { skbaddr: ffff8800d2bcdc00 } hitcount: 2 len: 24420
+ { skbaddr: ffff8800d2bcc200 } hitcount: 2 len: 12996
+
+ Totals:
+ Hits: 14
+ Entries: 12
+ Dropped: 0
+
+
+ # event histogram
+ #
+ # trigger info: hist:keys=skbaddr.hex:vals=hitcount,len:sort=hitcount:size=2048 if len < 0 [active]
+ #
+
+
+ Totals:
+ Hits: 0
+ Entries: 0
+ Dropped: 0
+
+ Named triggers can be used to have triggers share a common set of
+ histogram data. This capability is mostly useful for combining the
+ output of events generated by tracepoints contained inside inline
+ functions, but names can be used in a hist trigger on any event.
+ For example, these two triggers when hit will update the same 'len'
+ field in the shared 'foo' histogram data::
+
+ # echo 'hist:name=foo:keys=skbaddr.hex:vals=len' > \
+ /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger
+ # echo 'hist:name=foo:keys=skbaddr.hex:vals=len' > \
+ /sys/kernel/debug/tracing/events/net/netif_rx/trigger
+
+ You can see that they're updating common histogram data by reading
+ each event's hist files at the same time::
+
+ # cat /sys/kernel/debug/tracing/events/net/netif_receive_skb/hist;
+ cat /sys/kernel/debug/tracing/events/net/netif_rx/hist
+
+ # event histogram
+ #
+ # trigger info: hist:name=foo:keys=skbaddr.hex:vals=hitcount,len:sort=hitcount:size=2048 [active]
+ #
+
+ { skbaddr: ffff88000ad53500 } hitcount: 1 len: 46
+ { skbaddr: ffff8800af5a1500 } hitcount: 1 len: 76
+ { skbaddr: ffff8800d62a1900 } hitcount: 1 len: 46
+ { skbaddr: ffff8800d2bccb00 } hitcount: 1 len: 468
+ { skbaddr: ffff8800d3c69900 } hitcount: 1 len: 46
+ { skbaddr: ffff88009ff09100 } hitcount: 1 len: 52
+ { skbaddr: ffff88010f13ab00 } hitcount: 1 len: 168
+ { skbaddr: ffff88006a54f400 } hitcount: 1 len: 46
+ { skbaddr: ffff8800d2bcc500 } hitcount: 1 len: 260
+ { skbaddr: ffff880064505000 } hitcount: 1 len: 46
+ { skbaddr: ffff8800baf24e00 } hitcount: 1 len: 32
+ { skbaddr: ffff88009fe0ad00 } hitcount: 1 len: 46
+ { skbaddr: ffff8800d3edff00 } hitcount: 1 len: 44
+ { skbaddr: ffff88009fe0b400 } hitcount: 1 len: 168
+ { skbaddr: ffff8800a1c55a00 } hitcount: 1 len: 40
+ { skbaddr: ffff8800d2bcd100 } hitcount: 1 len: 40
+ { skbaddr: ffff880064505f00 } hitcount: 1 len: 174
+ { skbaddr: ffff8800a8bff200 } hitcount: 1 len: 160
+ { skbaddr: ffff880044e3cc00 } hitcount: 1 len: 76
+ { skbaddr: ffff8800a8bfe700 } hitcount: 1 len: 46
+ { skbaddr: ffff8800d2bcdc00 } hitcount: 1 len: 32
+ { skbaddr: ffff8800a1f64800 } hitcount: 1 len: 46
+ { skbaddr: ffff8800d2bcde00 } hitcount: 1 len: 988
+ { skbaddr: ffff88006a5dea00 } hitcount: 1 len: 46
+ { skbaddr: ffff88002e37a200 } hitcount: 1 len: 44
+ { skbaddr: ffff8800a1f32c00 } hitcount: 2 len: 676
+ { skbaddr: ffff88000ad52600 } hitcount: 2 len: 107
+ { skbaddr: ffff8800a1f91e00 } hitcount: 2 len: 92
+ { skbaddr: ffff8800af5a0200 } hitcount: 2 len: 142
+ { skbaddr: ffff8800d2bcc600 } hitcount: 2 len: 220
+ { skbaddr: ffff8800ba36f500 } hitcount: 2 len: 92
+ { skbaddr: ffff8800d021f800 } hitcount: 2 len: 92
+ { skbaddr: ffff8800a1f33600 } hitcount: 2 len: 675
+ { skbaddr: ffff8800a8bfff00 } hitcount: 3 len: 138
+ { skbaddr: ffff8800d62a1300 } hitcount: 3 len: 138
+ { skbaddr: ffff88002e37a100 } hitcount: 4 len: 184
+ { skbaddr: ffff880064504400 } hitcount: 4 len: 184
+ { skbaddr: ffff8800a8bfec00 } hitcount: 4 len: 184
+ { skbaddr: ffff88000ad53700 } hitcount: 5 len: 230
+ { skbaddr: ffff8800d2bcdb00 } hitcount: 5 len: 196
+ { skbaddr: ffff8800a1f90000 } hitcount: 6 len: 276
+ { skbaddr: ffff88006a54f900 } hitcount: 6 len: 276
+
+ Totals:
+ Hits: 81
+ Entries: 42
+ Dropped: 0
+ # event histogram
+ #
+ # trigger info: hist:name=foo:keys=skbaddr.hex:vals=hitcount,len:sort=hitcount:size=2048 [active]
+ #
+
+ { skbaddr: ffff88000ad53500 } hitcount: 1 len: 46
+ { skbaddr: ffff8800af5a1500 } hitcount: 1 len: 76
+ { skbaddr: ffff8800d62a1900 } hitcount: 1 len: 46
+ { skbaddr: ffff8800d2bccb00 } hitcount: 1 len: 468
+ { skbaddr: ffff8800d3c69900 } hitcount: 1 len: 46
+ { skbaddr: ffff88009ff09100 } hitcount: 1 len: 52
+ { skbaddr: ffff88010f13ab00 } hitcount: 1 len: 168
+ { skbaddr: ffff88006a54f400 } hitcount: 1 len: 46
+ { skbaddr: ffff8800d2bcc500 } hitcount: 1 len: 260
+ { skbaddr: ffff880064505000 } hitcount: 1 len: 46
+ { skbaddr: ffff8800baf24e00 } hitcount: 1 len: 32
+ { skbaddr: ffff88009fe0ad00 } hitcount: 1 len: 46
+ { skbaddr: ffff8800d3edff00 } hitcount: 1 len: 44
+ { skbaddr: ffff88009fe0b400 } hitcount: 1 len: 168
+ { skbaddr: ffff8800a1c55a00 } hitcount: 1 len: 40
+ { skbaddr: ffff8800d2bcd100 } hitcount: 1 len: 40
+ { skbaddr: ffff880064505f00 } hitcount: 1 len: 174
+ { skbaddr: ffff8800a8bff200 } hitcount: 1 len: 160
+ { skbaddr: ffff880044e3cc00 } hitcount: 1 len: 76
+ { skbaddr: ffff8800a8bfe700 } hitcount: 1 len: 46
+ { skbaddr: ffff8800d2bcdc00 } hitcount: 1 len: 32
+ { skbaddr: ffff8800a1f64800 } hitcount: 1 len: 46
+ { skbaddr: ffff8800d2bcde00 } hitcount: 1 len: 988
+ { skbaddr: ffff88006a5dea00 } hitcount: 1 len: 46
+ { skbaddr: ffff88002e37a200 } hitcount: 1 len: 44
+ { skbaddr: ffff8800a1f32c00 } hitcount: 2 len: 676
+ { skbaddr: ffff88000ad52600 } hitcount: 2 len: 107
+ { skbaddr: ffff8800a1f91e00 } hitcount: 2 len: 92
+ { skbaddr: ffff8800af5a0200 } hitcount: 2 len: 142
+ { skbaddr: ffff8800d2bcc600 } hitcount: 2 len: 220
+ { skbaddr: ffff8800ba36f500 } hitcount: 2 len: 92
+ { skbaddr: ffff8800d021f800 } hitcount: 2 len: 92
+ { skbaddr: ffff8800a1f33600 } hitcount: 2 len: 675
+ { skbaddr: ffff8800a8bfff00 } hitcount: 3 len: 138
+ { skbaddr: ffff8800d62a1300 } hitcount: 3 len: 138
+ { skbaddr: ffff88002e37a100 } hitcount: 4 len: 184
+ { skbaddr: ffff880064504400 } hitcount: 4 len: 184
+ { skbaddr: ffff8800a8bfec00 } hitcount: 4 len: 184
+ { skbaddr: ffff88000ad53700 } hitcount: 5 len: 230
+ { skbaddr: ffff8800d2bcdb00 } hitcount: 5 len: 196
+ { skbaddr: ffff8800a1f90000 } hitcount: 6 len: 276
+ { skbaddr: ffff88006a54f900 } hitcount: 6 len: 276
+
+ Totals:
+ Hits: 81
+ Entries: 42
+ Dropped: 0
+
+ And here's an example that shows how to combine histogram data from
+ any two events even if they don't share any 'compatible' fields
+ other than 'hitcount' and 'stacktrace'. These commands create a
+ couple of triggers named 'bar' using those fields::
+
+ # echo 'hist:name=bar:key=stacktrace:val=hitcount' > \
+ /sys/kernel/debug/tracing/events/sched/sched_process_fork/trigger
+ # echo 'hist:name=bar:key=stacktrace:val=hitcount' > \
+ /sys/kernel/debug/tracing/events/net/netif_rx/trigger
+
+ And displaying the output of either shows some interesting if
+ somewhat confusing output::
+
+ # cat /sys/kernel/debug/tracing/events/sched/sched_process_fork/hist
+ # cat /sys/kernel/debug/tracing/events/net/netif_rx/hist
+
+ # event histogram
+ #
+ # trigger info: hist:name=bar:keys=stacktrace:vals=hitcount:sort=hitcount:size=2048 [active]
+ #
+
+ { stacktrace:
+ _do_fork+0x18e/0x330
+ kernel_thread+0x29/0x30
+ kthreadd+0x154/0x1b0
+ ret_from_fork+0x3f/0x70
+ } hitcount: 1
+ { stacktrace:
+ netif_rx_internal+0xb2/0xd0
+ netif_rx_ni+0x20/0x70
+ dev_loopback_xmit+0xaa/0xd0
+ ip_mc_output+0x126/0x240
+ ip_local_out_sk+0x31/0x40
+ igmp_send_report+0x1e9/0x230
+ igmp_timer_expire+0xe9/0x120
+ call_timer_fn+0x39/0xf0
+ run_timer_softirq+0x1e1/0x290
+ __do_softirq+0xfd/0x290
+ irq_exit+0x98/0xb0
+ smp_apic_timer_interrupt+0x4a/0x60
+ apic_timer_interrupt+0x6d/0x80
+ cpuidle_enter+0x17/0x20
+ call_cpuidle+0x3b/0x60
+ cpu_startup_entry+0x22d/0x310
+ } hitcount: 1
+ { stacktrace:
+ netif_rx_internal+0xb2/0xd0
+ netif_rx_ni+0x20/0x70
+ dev_loopback_xmit+0xaa/0xd0
+ ip_mc_output+0x17f/0x240
+ ip_local_out_sk+0x31/0x40
+ ip_send_skb+0x1a/0x50
+ udp_send_skb+0x13e/0x270
+ udp_sendmsg+0x2bf/0x980
+ inet_sendmsg+0x67/0xa0
+ sock_sendmsg+0x38/0x50
+ SYSC_sendto+0xef/0x170
+ SyS_sendto+0xe/0x10
+ entry_SYSCALL_64_fastpath+0x12/0x6a
+ } hitcount: 2
+ { stacktrace:
+ netif_rx_internal+0xb2/0xd0
+ netif_rx+0x1c/0x60
+ loopback_xmit+0x6c/0xb0
+ dev_hard_start_xmit+0x219/0x3a0
+ __dev_queue_xmit+0x415/0x4f0
+ dev_queue_xmit_sk+0x13/0x20
+ ip_finish_output2+0x237/0x340
+ ip_finish_output+0x113/0x1d0
+ ip_output+0x66/0xc0
+ ip_local_out_sk+0x31/0x40
+ ip_send_skb+0x1a/0x50
+ udp_send_skb+0x16d/0x270
+ udp_sendmsg+0x2bf/0x980
+ inet_sendmsg+0x67/0xa0
+ sock_sendmsg+0x38/0x50
+ ___sys_sendmsg+0x14e/0x270
+ } hitcount: 76
+ { stacktrace:
+ netif_rx_internal+0xb2/0xd0
+ netif_rx+0x1c/0x60
+ loopback_xmit+0x6c/0xb0
+ dev_hard_start_xmit+0x219/0x3a0
+ __dev_queue_xmit+0x415/0x4f0
+ dev_queue_xmit_sk+0x13/0x20
+ ip_finish_output2+0x237/0x340
+ ip_finish_output+0x113/0x1d0
+ ip_output+0x66/0xc0
+ ip_local_out_sk+0x31/0x40
+ ip_send_skb+0x1a/0x50
+ udp_send_skb+0x16d/0x270
+ udp_sendmsg+0x2bf/0x980
+ inet_sendmsg+0x67/0xa0
+ sock_sendmsg+0x38/0x50
+ ___sys_sendmsg+0x269/0x270
+ } hitcount: 77
+ { stacktrace:
+ netif_rx_internal+0xb2/0xd0
+ netif_rx+0x1c/0x60
+ loopback_xmit+0x6c/0xb0
+ dev_hard_start_xmit+0x219/0x3a0
+ __dev_queue_xmit+0x415/0x4f0
+ dev_queue_xmit_sk+0x13/0x20
+ ip_finish_output2+0x237/0x340
+ ip_finish_output+0x113/0x1d0
+ ip_output+0x66/0xc0
+ ip_local_out_sk+0x31/0x40
+ ip_send_skb+0x1a/0x50
+ udp_send_skb+0x16d/0x270
+ udp_sendmsg+0x2bf/0x980
+ inet_sendmsg+0x67/0xa0
+ sock_sendmsg+0x38/0x50
+ SYSC_sendto+0xef/0x170
+ } hitcount: 88
+ { stacktrace:
+ _do_fork+0x18e/0x330
+ SyS_clone+0x19/0x20
+ entry_SYSCALL_64_fastpath+0x12/0x6a
+ } hitcount: 244
+
+ Totals:
+ Hits: 489
+ Entries: 7
+ Dropped: 0