diff options
Diffstat (limited to 'Documentation')
72 files changed, 3181 insertions, 392 deletions
diff --git a/Documentation/ABI/testing/sysfs-driver-habanalabs b/Documentation/ABI/testing/sysfs-driver-habanalabs index 13b5b2ec3be7..1b98b6503b23 100644 --- a/Documentation/ABI/testing/sysfs-driver-habanalabs +++ b/Documentation/ABI/testing/sysfs-driver-habanalabs @@ -201,7 +201,19 @@ What: /sys/class/habanalabs/hl<n>/status Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org -Description: Status of the card: "Operational", "Malfunction", "In reset". +Description: Status of the card: + + * "operational" - Device is available for work. + * "in reset" - Device is going through reset, will be + available shortly. + * "disabled" - Device is not usable. + * "needs reset" - Device is not usable until a hard reset + is initiated. + * "in device creation" - Device is not available yet, as it + is still initializing. + * "in reset after device release" - Device is going through + a compute-reset which is executed after a device release + (relevant for Gaudi2 only). What: /sys/class/habanalabs/hl<n>/thermal_ver Date: Jan 2019 diff --git a/Documentation/accel/introduction.rst b/Documentation/accel/introduction.rst index 11cade51f387..89984dfececf 100644 --- a/Documentation/accel/introduction.rst +++ b/Documentation/accel/introduction.rst @@ -67,9 +67,9 @@ tree - drivers/accel/. The accelerator devices will be exposed to the user space with the dedicated 261 major number and will have the following convention: -- device char files - /dev/accel/accel* -- sysfs - /sys/class/accel/accel*/ -- debugfs - /sys/kernel/debug/accel/*/ +- device char files - /dev/accel/accel\* +- sysfs - /sys/class/accel/accel\*/ +- debugfs - /sys/kernel/debug/accel/\*/ Getting Started =============== diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt deleted file mode 100644 index 525a4bfd8634..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt +++ /dev/null @@ -1,112 +0,0 @@ -Cadence DSI bridge -================== - -The Cadence DSI bridge is a DPI to DSI bridge supporting up to 4 DSI lanes. - -Required properties: -- compatible: should be set to "cdns,dsi". -- reg: physical base address and length of the controller's registers. -- interrupts: interrupt line connected to the DSI bridge. -- clocks: DSI bridge clocks. -- clock-names: must contain "dsi_p_clk" and "dsi_sys_clk". -- phys: phandle link to the MIPI D-PHY controller. -- phy-names: must contain "dphy". -- #address-cells: must be set to 1. -- #size-cells: must be set to 0. - -Optional properties: -- resets: DSI reset lines. -- reset-names: can contain "dsi_p_rst". - -Required subnodes: -- ports: Ports as described in Documentation/devicetree/bindings/graph.txt. - 2 ports are available: - * port 0: this port is only needed if some of your DSI devices are - controlled through an external bus like I2C or SPI. Can have at - most 4 endpoints. The endpoint number is directly encoding the - DSI virtual channel used by this device. - * port 1: represents the DPI input. - Other ports will be added later to support the new kind of inputs. - -- one subnode per DSI device connected on the DSI bus. Each DSI device should - contain a reg property encoding its virtual channel. - -Example: - dsi0: dsi@fd0c0000 { - compatible = "cdns,dsi"; - reg = <0x0 0xfd0c0000 0x0 0x1000>; - clocks = <&pclk>, <&sysclk>; - clock-names = "dsi_p_clk", "dsi_sys_clk"; - interrupts = <1>; - phys = <&dphy0>; - phy-names = "dphy"; - #address-cells = <1>; - #size-cells = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - dsi0_dpi_input: endpoint { - remote-endpoint = <&xxx_dpi_output>; - }; - }; - }; - - panel: dsi-dev@0 { - compatible = "<vendor,panel>"; - reg = <0>; - }; - }; - -or - - dsi0: dsi@fd0c0000 { - compatible = "cdns,dsi"; - reg = <0x0 0xfd0c0000 0x0 0x1000>; - clocks = <&pclk>, <&sysclk>; - clock-names = "dsi_p_clk", "dsi_sys_clk"; - interrupts = <1>; - phys = <&dphy1>; - phy-names = "dphy"; - #address-cells = <1>; - #size-cells = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - dsi0_output: endpoint@0 { - reg = <0>; - remote-endpoint = <&dsi_panel_input>; - }; - }; - - port@1 { - reg = <1>; - dsi0_dpi_input: endpoint { - remote-endpoint = <&xxx_dpi_output>; - }; - }; - }; - }; - - i2c@xxx { - panel: panel@59 { - compatible = "<vendor,panel>"; - reg = <0x59>; - - port { - dsi_panel_input: endpoint { - remote-endpoint = <&dsi0_output>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.yaml new file mode 100644 index 000000000000..23060324d16e --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.yaml @@ -0,0 +1,180 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/cdns,dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence DSI bridge + +maintainers: + - Boris Brezillon <boris.brezillon@bootlin.com> + +description: | + CDNS DSI is a bridge device which converts DPI to DSI + +properties: + compatible: + enum: + - cdns,dsi + - ti,j721e-dsi + + reg: + minItems: 1 + items: + - description: + Register block for controller's registers. + - description: + Register block for wrapper settings registers in case of TI J7 SoCs. + + clocks: + items: + - description: PSM clock, used by the IP + - description: sys clock, used by the IP + + clock-names: + items: + - const: dsi_p_clk + - const: dsi_sys_clk + + phys: + maxItems: 1 + + phy-names: + const: dphy + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + const: dsi_p_rst + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Output port representing the DSI output. It can have + at most 4 endpoints. The endpoint number is directly encoding + the DSI virtual channel used by this device. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Input port representing the DPI input. + + required: + - port@1 + +allOf: + - $ref: ../dsi-controller.yaml# + + - if: + properties: + compatible: + contains: + const: ti,j721e-dsi + then: + properties: + reg: + minItems: 2 + maxItems: 2 + power-domains: + maxItems: 1 + else: + properties: + reg: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - phys + - phy-names + - ports + +unevaluatedProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + dsi@fd0c0000 { + compatible = "cdns,dsi"; + reg = <0x0 0xfd0c0000 0x0 0x1000>; + clocks = <&pclk>, <&sysclk>; + clock-names = "dsi_p_clk", "dsi_sys_clk"; + interrupts = <1>; + phys = <&dphy0>; + phy-names = "dphy"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&xxx_dpi_output>; + }; + }; + }; + + panel@0 { + compatible = "panasonic,vvx10f034n00"; + reg = <0>; + power-supply = <&vcc_lcd_reg>; + }; + }; + }; + + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + dsi@fd0c0000 { + compatible = "cdns,dsi"; + reg = <0x0 0xfd0c0000 0x0 0x1000>; + clocks = <&pclk>, <&sysclk>; + clock-names = "dsi_p_clk", "dsi_sys_clk"; + interrupts = <1>; + phys = <&dphy1>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&dsi_panel_input>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&xxx_dpi_output>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml index b19be0804abe..6e0e3ba9b49e 100644 --- a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml +++ b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml @@ -16,7 +16,9 @@ description: | properties: compatible: - const: fsl,imx8mp-ldb + enum: + - fsl,imx8mp-ldb + - fsl,imx93-ldb clocks: maxItems: 1 @@ -57,6 +59,18 @@ required: - clocks - ports +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx93-ldb + then: + properties: + ports: + properties: + port@2: false + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml index b697c42399ea..c9a882ee6d98 100644 --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml @@ -52,9 +52,49 @@ properties: maxItems: 1 description: extcon specifier for the Power Delivery - port: - $ref: /schemas/graph.yaml#/properties/port - description: A port node pointing to DPI host port node + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: A port node pointing to DPI host port node + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + link-frequencies: + minItems: 1 + maxItems: 1 + description: Allowed max link frequencies in Hz + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Video port for DP output + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + uniqueItems: true + items: + - enum: [ 0, 1 ] + - const: 1 + - const: 2 + - const: 3 + + required: + - port@0 + - port@1 required: - compatible @@ -63,6 +103,7 @@ required: - interrupts - reset-gpios - extcon + - ports additionalProperties: false @@ -85,9 +126,24 @@ examples: reset-gpios = <&pio 179 1>; extcon = <&usbc_extcon>; - port { - it6505_in: endpoint { - remote-endpoint = <&dpi_out>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + it6505_in: endpoint { + remote-endpoint = <&dpi_out>; + link-frequencies = /bits/ 64 <150000000>; + }; + }; + + port@1 { + reg = <1>; + it6505_out: endpoint { + remote-endpoint = <&dp_in>; + data-lanes = <0 1>; + }; }; }; }; diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml index d3454da1247a..a7eb2603691f 100644 --- a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml @@ -17,7 +17,9 @@ description: | properties: compatible: - const: ite,it66121 + enum: + - ite,it66121 + - ite,it6610 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml index afeeb967393d..d33026f85e19 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml @@ -11,13 +11,14 @@ maintainers: description: | This binding describes the MIPI DSI/CSI-2 encoder embedded in the Renesas - R-Car V3U SoC. The encoder can operate in either DSI or CSI-2 mode, with up + R-Car Gen4 SoCs. The encoder can operate in either DSI or CSI-2 mode, with up to four data lanes. properties: compatible: enum: - renesas,r8a779a0-dsi-csi2-tx # for V3U + - renesas,r8a779g0-dsi-csi2-tx # for V4H reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml index 131d5b63ec4f..e08c24633926 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml @@ -22,6 +22,7 @@ properties: items: - enum: - renesas,r9a07g044-mipi-dsi # RZ/G2{L,LC} + - renesas,r9a07g054-mipi-dsi # RZ/V2L - const: renesas,rzg2l-mipi-dsi reg: diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml index d4d585485e7b..92741486c24d 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml @@ -31,6 +31,7 @@ properties: - items: - enum: - mediatek,mt8186-disp-aal + - mediatek,mt8188-disp-aal - mediatek,mt8192-disp-aal - mediatek,mt8195-disp-aal - const: mediatek,mt8183-disp-aal diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml index 63fb02014a56..b04820c95b22 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml @@ -27,12 +27,13 @@ properties: - const: mediatek,mt8192-disp-ccorr - items: - enum: + - mediatek,mt8188-disp-ccorr - mediatek,mt8195-disp-ccorr - const: mediatek,mt8192-disp-ccorr - items: - enum: - mediatek,mt8186-disp-ccorr - - const: mediatek,mt8183-disp-ccorr + - const: mediatek,mt8192-disp-ccorr reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml index d2f89ee7996f..62306c88f485 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml @@ -37,6 +37,7 @@ properties: - enum: - mediatek,mt8183-disp-color - mediatek,mt8186-disp-color + - mediatek,mt8188-disp-color - mediatek,mt8192-disp-color - mediatek,mt8195-disp-color - const: mediatek,mt8173-disp-color diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml index 8ad8187c02d1..5c7445c174e5 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml @@ -27,6 +27,7 @@ properties: - items: - enum: - mediatek,mt8186-disp-dither + - mediatek,mt8188-disp-dither - mediatek,mt8192-disp-dither - mediatek,mt8195-disp-dither - const: mediatek,mt8183-disp-dither diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml index a89ea0ea7542..a5c6a91fac71 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml @@ -28,6 +28,7 @@ properties: - items: - enum: - mediatek,mt8186-disp-gamma + - mediatek,mt8188-disp-gamma - mediatek,mt8192-disp-gamma - mediatek,mt8195-disp-gamma - const: mediatek,mt8183-disp-gamma diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml index a2a27d0ca038..065e526f950e 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml @@ -36,6 +36,7 @@ properties: - const: mediatek,mt2701-disp-ovl - items: - enum: + - mediatek,mt8188-disp-ovl - mediatek,mt8195-disp-ovl - const: mediatek,mt8183-disp-ovl - items: diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml index 654080bfbdfb..27de64495401 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml @@ -26,6 +26,7 @@ properties: - items: - enum: - mediatek,mt8186-disp-postmask + - mediatek,mt8188-disp-postmask - const: mediatek,mt8192-disp-postmask reg: diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml index 0882ae86e6c4..3ade2ece3fed 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml @@ -33,6 +33,10 @@ properties: - const: mediatek,mt8195-disp-rdma - items: - enum: + - mediatek,mt8188-disp-rdma + - const: mediatek,mt8195-disp-rdma + - items: + - enum: - mediatek,mt7623-disp-rdma - mediatek,mt2712-disp-rdma - const: mediatek,mt2701-disp-rdma diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml index f2515af8256f..efe4257c031f 100644 --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml @@ -21,6 +21,9 @@ properties: - qcom,sc7280-edp - qcom,sc8180x-dp - qcom,sc8180x-edp + - qcom,sc8280xp-dp + - qcom,sc8280xp-edp + - qcom,sdm845-dp - qcom,sm8350-dp reg: @@ -81,6 +84,7 @@ properties: data-lanes: $ref: /schemas/types.yaml#/definitions/uint32-array + deprecated: true minItems: 1 maxItems: 4 items: @@ -102,8 +106,28 @@ properties: description: Input endpoint of the controller port@1: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base description: Output endpoint of the controller + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + properties: + data-lanes: + minItems: 1 + maxItems: 4 + items: + enum: [ 0, 1, 2, 3 ] + + link-frequencies: + minItems: 1 + maxItems: 4 + items: + enum: [ 1620000000, 2700000000, 5400000000, 8100000000 ] + + required: + - port@0 + - port@1 required: - compatible @@ -127,11 +151,10 @@ allOf: enum: - qcom,sc7280-edp - qcom,sc8180x-edp + - qcom,sc8280xp-edp then: properties: "#sound-dai-cells": false - reg: - maxItems: 4 else: properties: aux-bus: false @@ -193,6 +216,8 @@ examples: reg = <1>; endpoint { remote-endpoint = <&typec>; + data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; }; }; diff --git a/Documentation/devicetree/bindings/display/msm/dpu-common.yaml b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml index 8ffbc30c6b7f..3f953aa5e694 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-common.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml @@ -13,7 +13,15 @@ maintainers: description: | Common properties for QCom DPU display controller. +# Do not select this by default, otherwise it is also selected for all +# display-controller@ nodes +select: + false + properties: + $nodename: + pattern: '^display-controller@[0-9a-f]+$' + interrupts: maxItems: 1 @@ -40,10 +48,6 @@ properties: - port@0 required: - - compatible - - reg - - reg-names - - clocks - interrupts - power-domains - operating-points-v2 diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index 6e2fd6e9fa7f..e75a3efe4dac 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -9,14 +9,33 @@ title: Qualcomm Display DSI controller maintainers: - Krishna Manikandan <quic_mkrishn@quicinc.com> -allOf: - - $ref: "../dsi-controller.yaml#" - properties: compatible: - enum: - - qcom,mdss-dsi-ctrl - - qcom,dsi-ctrl-6g-qcm2290 + oneOf: + - items: + - enum: + - qcom,apq8064-dsi-ctrl + - qcom,msm8916-dsi-ctrl + - qcom,msm8953-dsi-ctrl + - qcom,msm8974-dsi-ctrl + - qcom,msm8996-dsi-ctrl + - qcom,msm8998-dsi-ctrl + - qcom,qcm2290-dsi-ctrl + - qcom,sc7180-dsi-ctrl + - qcom,sc7280-dsi-ctrl + - qcom,sdm660-dsi-ctrl + - qcom,sdm845-dsi-ctrl + - qcom,sm8150-dsi-ctrl + - qcom,sm8250-dsi-ctrl + - qcom,sm8350-dsi-ctrl + - qcom,sm8450-dsi-ctrl + - qcom,sm8550-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + - items: + - enum: + - dsi-ctrl-6g-qcm2290 + - const: qcom,mdss-dsi-ctrl + deprecated: true reg: maxItems: 1 @@ -28,22 +47,23 @@ properties: maxItems: 1 clocks: - items: - - description: Display byte clock - - description: Display byte interface clock - - description: Display pixel clock - - description: Display core clock - - description: Display AHB clock - - description: Display AXI clock + description: | + Several clocks are used, depending on the variant. Typical ones are:: + - bus:: Display AHB clock. + - byte:: Display byte clock. + - byte_intf:: Display byte interface clock. + - core:: Display core clock. + - core_mss:: Core MultiMedia SubSystem clock. + - iface:: Display AXI clock. + - mdp_core:: MDP Core clock. + - mnoc:: MNOC clock + - pixel:: Display pixel clock. + minItems: 3 + maxItems: 9 clock-names: - items: - - const: byte - - const: byte_intf - - const: pixel - - const: core - - const: iface - - const: bus + minItems: 3 + maxItems: 9 phys: maxItems: 1 @@ -52,10 +72,6 @@ properties: deprecated: true const: dsi - "#address-cells": true - - "#size-cells": true - syscon-sfpb: description: A phandle to mmss_sfpb syscon node (only for DSIv2). $ref: "/schemas/types.yaml#/definitions/phandle" @@ -67,12 +83,16 @@ properties: 2 DSI links. assigned-clocks: - maxItems: 2 + minItems: 2 + maxItems: 4 description: | Parents of "byte" and "pixel" for the given platform. + For DSIv2 platforms this should contain "byte", "esc", "src" and + "pixel_src" clocks. assigned-clock-parents: - maxItems: 2 + minItems: 2 + maxItems: 4 description: | The Byte clock and Pixel clock PLL outputs provided by a DSI PHY block. @@ -103,7 +123,7 @@ properties: properties: data-lanes: maxItems: 4 - minItems: 4 + minItems: 1 items: enum: [ 0, 1, 2, 3 ] @@ -119,7 +139,7 @@ properties: properties: data-lanes: maxItems: 4 - minItems: 4 + minItems: 1 items: enum: [ 0, 1, 2, 3 ] @@ -127,6 +147,26 @@ properties: - port@0 - port@1 + avdd-supply: + description: + Phandle to vdd regulator device node + + vcca-supply: + description: + Phandle to vdd regulator device node + + vdd-supply: + description: + VDD regulator + + vddio-supply: + description: + VDD-IO regulator + + vdda-supply: + description: + VDDA regulator + required: - compatible - reg @@ -139,7 +179,192 @@ required: - assigned-clock-parents - ports -additionalProperties: false +allOf: + - $ref: ../dsi-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,apq8064-dsi-ctrl + then: + properties: + clocks: + maxItems: 7 + clock-names: + items: + - const: iface + - const: bus + - const: core_mmss + - const: src + - const: byte + - const: pixel + - const: core + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8916-dsi-ctrl + then: + properties: + clocks: + maxItems: 6 + clock-names: + items: + - const: mdp_core + - const: iface + - const: bus + - const: byte + - const: pixel + - const: core + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8953-dsi-ctrl + then: + properties: + clocks: + maxItems: 6 + clock-names: + items: + - const: mdp_core + - const: iface + - const: bus + - const: byte + - const: pixel + - const: core + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8974-dsi-ctrl + then: + properties: + clocks: + maxItems: 7 + clock-names: + items: + - const: mdp_core + - const: iface + - const: bus + - const: byte + - const: pixel + - const: core + - const: core_mmss + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-dsi-ctrl + then: + properties: + clocks: + maxItems: 7 + clock-names: + items: + - const: mdp_core + - const: byte + - const: iface + - const: bus + - const: core_mmss + - const: pixel + - const: core + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8998-dsi-ctrl + then: + properties: + clocks: + maxItems: 6 + clock-names: + items: + - const: byte + - const: byte_intf + - const: pixel + - const: core + - const: iface + - const: bus + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7180-dsi-ctrl + - qcom,sc7280-dsi-ctrl + - qcom,sm8150-dsi-ctrl + - qcom,sm8250-dsi-ctrl + - qcom,sm8350-dsi-ctrl + - qcom,sm8450-dsi-ctrl + - qcom,sm8550-dsi-ctrl + then: + properties: + clocks: + maxItems: 6 + clock-names: + items: + - const: byte + - const: byte_intf + - const: pixel + - const: core + - const: iface + - const: bus + + - if: + properties: + compatible: + contains: + enum: + - qcom,sdm660-dsi-ctrl + then: + properties: + clocks: + maxItems: 9 + clock-names: + items: + - const: mdp_core + - const: byte + - const: byte_intf + - const: mnoc + - const: iface + - const: bus + - const: core_mmss + - const: pixel + - const: core + + - if: + properties: + compatible: + contains: + enum: + - qcom,sdm845-dsi-ctrl + then: + properties: + clocks: + maxItems: 6 + clock-names: + items: + - const: byte + - const: byte_intf + - const: pixel + - const: core + - const: iface + - const: bus + +unevaluatedProperties: false examples: - | @@ -149,7 +374,7 @@ examples: #include <dt-bindings/power/qcom-rpmpd.h> dsi@ae94000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,sc7180-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x0ae94000 0x400>; reg-names = "dsi_ctrl"; diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml index 2f1fd140c87d..cf4a338c4661 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml @@ -16,6 +16,7 @@ properties: compatible: enum: - qcom,dsi-phy-28nm-hpm + - qcom,dsi-phy-28nm-hpm-fam-b - qcom,dsi-phy-28nm-lp - qcom,dsi-phy-28nm-8960 diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml index c851770bbdf2..8e9031bbde73 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml @@ -18,6 +18,10 @@ properties: - qcom,dsi-phy-7nm - qcom,dsi-phy-7nm-8150 - qcom,sc7280-dsi-phy-7nm + - qcom,sm6375-dsi-phy-7nm + - qcom,sm8350-dsi-phy-5nm + - qcom,sm8450-dsi-phy-5nm + - qcom,sm8550-dsi-phy-4nm reg: items: @@ -44,7 +48,6 @@ required: - compatible - reg - reg-names - - vdds-supply unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml index 76d40f7933dd..0f6f08890e7e 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml @@ -4,14 +4,13 @@ $id: http://devicetree.org/schemas/display/msm/dsi-phy-common.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Description of Qualcomm Display DSI PHY common dt properties +title: Qualcomm Display DSI PHY Common Properties maintainers: - Krishna Manikandan <quic_mkrishn@quicinc.com> -description: | - This defines the DSI PHY dt properties which are common for all - dsi phy versions. +description: + Common properties for Qualcomm Display DSI PHY. properties: "#clock-cells": diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml index c5f49842dc7b..db8afc636576 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml @@ -149,6 +149,8 @@ allOf: description: GPU 3D engine clock - const: rbbmtimer description: GPU RBBM Timer for Adreno 5xx series + - const: rbcpr + description: GPU RB Core Power Reduction clock minItems: 2 maxItems: 7 diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt deleted file mode 100644 index 65d03c58dee6..000000000000 --- a/Documentation/devicetree/bindings/display/msm/mdp5.txt +++ /dev/null @@ -1,132 +0,0 @@ -Qualcomm adreno/snapdragon MDP5 display controller - -Description: - -This is the bindings documentation for the MDP5 display -controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 and MSM8996. - -MDP5: -Required properties: -- compatible: - * "qcom,mdp5" - MDP5 -- reg: Physical base address and length of the controller's registers. -- reg-names: The names of register regions. The following regions are required: - * "mdp_phys" -- interrupts: Interrupt line from MDP5 to MDSS interrupt controller. -- clocks: device clocks. See ../clocks/clock-bindings.txt for details. -- clock-names: the following clocks are required. -- * "bus" -- * "iface" -- * "core" -- * "vsync" -- ports: contains the list of output ports from MDP. These connect to interfaces - that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a - special case since it is a part of the MDP block itself). - - Each output port contains an endpoint that describes how it is connected to an - external interface. These are described by the standard properties documented - here: - Documentation/devicetree/bindings/graph.txt - Documentation/devicetree/bindings/media/video-interfaces.txt - - The availability of output ports can vary across SoC revisions: - - For MSM8974 and APQ8084: - Port 0 -> MDP_INTF0 (eDP) - Port 1 -> MDP_INTF1 (DSI1) - Port 2 -> MDP_INTF2 (DSI2) - Port 3 -> MDP_INTF3 (HDMI) - - For MSM8916: - Port 0 -> MDP_INTF1 (DSI1) - - For MSM8994 and MSM8996: - Port 0 -> MDP_INTF1 (DSI1) - Port 1 -> MDP_INTF2 (DSI2) - Port 2 -> MDP_INTF3 (HDMI) - -Optional properties: -- clock-names: the following clocks are optional: - * "lut" - * "tbu" - * "tbu_rt" - -Example: - -/ { - ... - - mdss: mdss@1a00000 { - compatible = "qcom,mdss"; - reg = <0x1a00000 0x1000>, - <0x1ac8000 0x3000>; - reg-names = "mdss_phys", "vbif_phys"; - - power-domains = <&gcc MDSS_GDSC>; - - clocks = <&gcc GCC_MDSS_AHB_CLK>, - <&gcc GCC_MDSS_AXI_CLK>, - <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface", - "bus", - "vsync" - - interrupts = <0 72 0>; - - interrupt-controller; - #interrupt-cells = <1>; - - #address-cells = <1>; - #size-cells = <1>; - ranges; - - mdp: mdp@1a01000 { - compatible = "qcom,mdp5"; - reg = <0x1a01000 0x90000>; - reg-names = "mdp_phys"; - - interrupt-parent = <&mdss>; - interrupts = <0 0>; - - clocks = <&gcc GCC_MDSS_AHB_CLK>, - <&gcc GCC_MDSS_AXI_CLK>, - <&gcc GCC_MDSS_MDP_CLK>, - <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface", - "bus", - "core", - "vsync"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mdp5_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; - }; - }; - - dsi0: dsi@1a98000 { - ... - ports { - ... - port@0 { - reg = <0>; - dsi0_in: endpoint { - remote-endpoint = <&mdp5_intf1_out>; - }; - }; - ... - }; - ... - }; - - dsi_phy0: dsi-phy@1a98300 { - ... - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml index 27d7242657b2..ccd7d6417523 100644 --- a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml +++ b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml @@ -15,7 +15,15 @@ description: Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates sub-blocks like DPU display controller, DSI and DP interfaces etc. +# Do not select this by default, otherwise it is also selected for qcom,mdss +# devices. +select: + false + properties: + $nodename: + pattern: "^display-subsystem@[0-9a-f]+$" + reg: maxItems: 1 @@ -70,7 +78,6 @@ properties: - description: MDSS_CORE reset required: - - compatible - reg - reg-names - power-domains diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml new file mode 100644 index 000000000000..ef461ad6ce4a --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml @@ -0,0 +1,156 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,mdp5.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Adreno/Snapdragon Mobile Display controller (MDP5) + +description: + MDP5 display controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 + and MSM8996. + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + - Rob Clark <robdclark@gmail.com> + +properties: + compatible: + oneOf: + - const: qcom,mdp5 + deprecated: true + - items: + - enum: + - qcom,apq8084-mdp5 + - qcom,msm8916-mdp5 + - qcom,msm8917-mdp5 + - qcom,msm8953-mdp5 + - qcom,msm8974-mdp5 + - qcom,msm8976-mdp5 + - qcom,msm8994-mdp5 + - qcom,msm8996-mdp5 + - qcom,sdm630-mdp5 + - qcom,sdm660-mdp5 + - const: qcom,mdp5 + + $nodename: + pattern: '^display-controller@[0-9a-f]+$' + + reg: + maxItems: 1 + + reg-names: + items: + - const: mdp_phys + + interrupts: + maxItems: 1 + + clocks: + minItems: 4 + maxItems: 7 + + clock-names: + oneOf: + - minItems: 4 + items: + - const: iface + - const: bus + - const: core + - const: vsync + - const: lut + - const: tbu + - const: tbu_rt + #MSM8996 has additional iommu clock + - items: + - const: iface + - const: bus + - const: core + - const: iommu + - const: vsync + + interconnects: + minItems: 1 + items: + - description: Interconnect path from mdp0 (or a single mdp) port to the data bus + - description: Interconnect path from mdp1 port to the data bus + - description: Interconnect path from rotator port to the data bus + + interconnect-names: + minItems: 1 + items: + - const: mdp0-mem + - const: mdp1-mem + - const: rotator-mem + + iommus: + items: + - description: apps SMMU with the Stream-ID mask for Hard-Fail port0 + + power-domains: + maxItems: 1 + + operating-points-v2: true + opp-table: + type: object + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: > + Contains the list of output ports from DPU device. These ports + connect to interfaces that are external to the DPU hardware, + such as DSI, DP etc. MDP5 devices support up to 4 ports: + one or two DSI ports, HDMI and eDP. + + patternProperties: + "^port@[0-3]+$": + $ref: /schemas/graph.yaml#/properties/port + + # at least one port is required + required: + - port@0 + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8916.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + display-controller@1a01000 { + compatible = "qcom,mdp5"; + reg = <0x1a01000 0x90000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml index ba0460268731..20889e409430 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml @@ -15,6 +15,9 @@ description: encapsulates sub-blocks like MDP5, DSI, HDMI, eDP, etc. properties: + $nodename: + pattern: "^display-subsystem@[0-9a-f]+$" + compatible: enum: - qcom,mdss @@ -44,18 +47,30 @@ properties: The MDSS power domain provided by GCC clocks: - minItems: 1 - items: - - description: Display abh clock - - description: Display axi clock - - description: Display vsync clock + oneOf: + - minItems: 3 + items: + - description: Display abh clock + - description: Display axi clock + - description: Display vsync clock + - description: Display core clock + - minItems: 1 + items: + - description: Display abh clock + - description: Display core clock clock-names: - minItems: 1 - items: - - const: iface - - const: bus - - const: vsync + oneOf: + - minItems: 3 + items: + - const: iface + - const: bus + - const: vsync + - const: core + - minItems: 1 + items: + - const: iface + - const: core "#address-cells": const: 1 @@ -84,17 +99,19 @@ required: - ranges patternProperties: - "^mdp@[1-9a-f][0-9a-f]*$": + "^display-controller@[1-9a-f][0-9a-f]*$": type: object properties: compatible: - const: qcom,mdp5 + contains: + const: qcom,mdp5 "^dsi@[1-9a-f][0-9a-f]*$": type: object properties: compatible: - const: qcom,mdss-dsi-ctrl + contains: + const: qcom,mdss-dsi-ctrl "^phy@[1-9a-f][0-9a-f]*$": type: object @@ -107,12 +124,6 @@ patternProperties: - qcom,dsi-phy-20nm - qcom,dsi-phy-28nm-hpm - qcom,dsi-phy-28nm-lp - - "^hdmi-phy@[1-9a-f][0-9a-f]*$": - type: object - properties: - compatible: - enum: - qcom,hdmi-phy-8084 - qcom,hdmi-phy-8660 - qcom,hdmi-phy-8960 @@ -137,7 +148,7 @@ examples: - | #include <dt-bindings/clock/qcom,gcc-msm8916.h> #include <dt-bindings/interrupt-controller/arm-gic.h> - mdss@1a00000 { + display-subsystem@1a00000 { compatible = "qcom,mdss"; reg = <0x1a00000 0x1000>, <0x1ac8000 0x3000>; @@ -161,8 +172,8 @@ examples: #size-cells = <1>; ranges; - mdp@1a01000 { - compatible = "qcom,mdp5"; + display-controller@1a01000 { + compatible = "qcom,msm8916-mdp5", "qcom,mdp5"; reg = <0x01a01000 0x89000>; reg-names = "mdp_phys"; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml index b02adba36e9e..8d3cd46260fb 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/display/msm/qcom,msm8998-dpu.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Display DPU dt properties for MSM8998 target +title: Qualcomm Display DPU on MSM8998 maintainers: - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> @@ -13,8 +13,7 @@ $ref: /schemas/display/msm/dpu-common.yaml# properties: compatible: - items: - - const: qcom,msm8998-dpu + const: qcom,msm8998-dpu reg: items: @@ -46,6 +45,13 @@ properties: - const: core - const: vsync +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml index cf52ff77a41a..3c2b6ed98a56 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml @@ -18,8 +18,7 @@ $ref: /schemas/display/msm/mdss-common.yaml# properties: compatible: - items: - - const: qcom,msm8998-mdss + const: qcom,msm8998-mdss clocks: items: @@ -47,7 +46,9 @@ patternProperties: type: object properties: compatible: - const: qcom,mdss-dsi-ctrl + items: + - const: qcom,msm8998-dsi-ctrl + - const: qcom,mdss-dsi-ctrl "^phy@[0-9a-f]+$": type: object @@ -55,6 +56,9 @@ patternProperties: compatible: const: qcom,dsi-phy-10nm-8998 +required: + - compatible + unevaluatedProperties: false examples: @@ -126,7 +130,7 @@ examples: }; dsi@c994000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x0c994000 0x400>; reg-names = "dsi_ctrl"; @@ -196,7 +200,7 @@ examples: }; dsi@c996000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x0c996000 0x400>; reg-names = "dsi_ctrl"; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml index a7b382f01b56..414f4e7ebdf1 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-dpu.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Display DPU dt properties for QCM2290 target +title: Qualcomm Display DPU on QCM2290 maintainers: - Loic Poulain <loic.poulain@linaro.org> @@ -13,8 +13,7 @@ $ref: /schemas/display/msm/dpu-common.yaml# properties: compatible: - items: - - const: qcom,qcm2290-dpu + const: qcom,qcm2290-dpu reg: items: @@ -42,6 +41,13 @@ properties: - const: lut - const: vsync +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml index 4795e13c7b59..2995b84b2cd4 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml @@ -18,8 +18,7 @@ $ref: /schemas/display/msm/mdss-common.yaml# properties: compatible: - items: - - const: qcom,qcm2290-mdss + const: qcom,qcm2290-mdss clocks: items: @@ -61,6 +60,9 @@ patternProperties: compatible: const: qcom,dsi-phy-14nm-2290 +required: + - compatible + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml index bd590a6b5b96..1fb8321d9ee8 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/display/msm/qcom,sc7180-dpu.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Display DPU dt properties for SC7180 target +title: Qualcomm Display DPU on SC7180 maintainers: - Krishna Manikandan <quic_mkrishn@quicinc.com> @@ -13,8 +13,7 @@ $ref: /schemas/display/msm/dpu-common.yaml# properties: compatible: - items: - - const: qcom,sc7180-dpu + const: qcom,sc7180-dpu reg: items: @@ -44,6 +43,13 @@ properties: - const: core - const: vsync +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml index 13e396d61a51..42ef06edddc4 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml @@ -18,8 +18,7 @@ $ref: /schemas/display/msm/mdss-common.yaml# properties: compatible: - items: - - const: qcom,sc7180-mdss + const: qcom,sc7180-mdss clocks: items: @@ -59,7 +58,9 @@ patternProperties: type: object properties: compatible: - const: qcom,mdss-dsi-ctrl + items: + - const: qcom,sc7180-dsi-ctrl + - const: qcom,mdss-dsi-ctrl "^phy@[0-9a-f]+$": type: object @@ -67,6 +68,9 @@ patternProperties: compatible: const: qcom,dsi-phy-10nm +required: + - compatible + unevaluatedProperties: false examples: @@ -142,7 +146,7 @@ examples: }; dsi@ae94000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,sc7180-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x0ae94000 0x400>; reg-names = "dsi_ctrl"; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml index 924059b387b6..26dc073bd19a 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/display/msm/qcom,sc7280-dpu.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Display DPU dt properties for SC7280 +title: Qualcomm Display DPU on SC7280 maintainers: - Krishna Manikandan <quic_mkrishn@quicinc.com> @@ -43,6 +43,13 @@ properties: - const: core - const: vsync +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml index a3de1744ba11..078e1d1a7d2f 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml @@ -58,7 +58,9 @@ patternProperties: type: object properties: compatible: - const: qcom,mdss-dsi-ctrl + items: + - const: qcom,sc7280-dsi-ctrl + - const: qcom,mdss-dsi-ctrl "^edp@[0-9a-f]+$": type: object @@ -74,6 +76,9 @@ patternProperties: - qcom,sc7280-dsi-phy-7nm - qcom,sc7280-edp-phy +required: + - compatible + unevaluatedProperties: false examples: @@ -162,7 +167,7 @@ examples: }; dsi@ae94000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,sc7280-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x0ae94000 0x400>; reg-names = "dsi_ctrl"; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml new file mode 100644 index 000000000000..f2c8e16cf067 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sc8280xp-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC8280XP Display Processing Unit + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +description: + Device tree bindings for SC8280XP Display Processing Unit. + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,sc8280xp-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display hf axi clock + - description: Display sf axi clock + - description: Display ahb clock + - description: Display lut clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: bus + - const: nrt_bus + - const: iface + - const: lut + - const: core + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h> + #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sc8280xp.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@ae01000 { + compatible = "qcom,sc8280xp-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc0 DISP_CC_MDSS_MDP_CLK>, + <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc0 DISP_CC_MDSS_MDP_CLK>, + <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <460000000>, + <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + interrupt-parent = <&mdss0>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&mdss0_dp0_in>; + }; + }; + + port@4 { + reg = <4>; + endpoint { + remote-endpoint = <&mdss0_dp1_in>; + }; + }; + + port@5 { + reg = <5>; + endpoint { + remote-endpoint = <&mdss0_dp3_in>; + }; + }; + + port@6 { + reg = <6>; + endpoint { + remote-endpoint = <&mdss0_dp2_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml new file mode 100644 index 000000000000..c239544bc37f --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml @@ -0,0 +1,151 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sc8280xp-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC8280XP Mobile Display Subsystem + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +description: + Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sc8280xp-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AHB clock from dispcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: ahb + - const: core + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sc8280xp-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + properties: + compatible: + enum: + - qcom,sc8280xp-dp + - qcom,sc8280xp-edp + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h> + #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sc8280xp.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,sc8280xp-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc0 MDSS_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + + resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + iommus = <&apps_smmu 0x1000 0x402>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sc8280xp-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc0 DISP_CC_MDSS_MDP_CLK>, + <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdss0_mdp_opp_table>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + interrupt-parent = <&mdss0>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&mdss0_dp0_in>; + }; + }; + + port@4 { + reg = <4>; + endpoint { + remote-endpoint = <&mdss0_dp1_in>; + }; + }; + + port@5 { + reg = <5>; + endpoint { + remote-endpoint = <&mdss0_dp3_in>; + }; + }; + + port@6 { + reg = <6>; + endpoint { + remote-endpoint = <&mdss0_dp2_in>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml index 5719b45f2860..0f7765d832e7 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/display/msm/qcom,sdm845-dpu.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Display DPU dt properties for SDM845 target +title: Qualcomm Display DPU on SDM845 maintainers: - Krishna Manikandan <quic_mkrishn@quicinc.com> @@ -13,8 +13,7 @@ $ref: /schemas/display/msm/dpu-common.yaml# properties: compatible: - items: - - const: qcom,sdm845-dpu + const: qcom,sdm845-dpu reg: items: @@ -42,6 +41,13 @@ properties: - const: core - const: vsync +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml index 31ca6f99fc22..6ecb00920d7f 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml @@ -18,8 +18,7 @@ $ref: /schemas/display/msm/mdss-common.yaml# properties: compatible: - items: - - const: qcom,sdm845-mdss + const: qcom,sdm845-mdss clocks: items: @@ -47,11 +46,19 @@ patternProperties: compatible: const: qcom,sdm845-dpu + "^displayport-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sdm845-dp + "^dsi@[0-9a-f]+$": type: object properties: compatible: - const: qcom,mdss-dsi-ctrl + items: + - const: qcom,sdm845-dsi-ctrl + - const: qcom,mdss-dsi-ctrl "^phy@[0-9a-f]+$": type: object @@ -59,6 +66,9 @@ patternProperties: compatible: const: qcom,dsi-phy-10nm +required: + - compatible + unevaluatedProperties: false examples: @@ -128,7 +138,7 @@ examples: }; dsi@ae94000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,sdm845-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x0ae94000 0x400>; reg-names = "dsi_ctrl"; @@ -198,7 +208,7 @@ examples: }; dsi@ae96000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,sdm845-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x0ae96000 0x400>; reg-names = "dsi_ctrl"; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml index 4a39a3031409..bf62c2f5325a 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/display/msm/qcom,sm6115-dpu.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Display DPU dt properties for SM6115 target +title: Qualcomm Display DPU on SM6115 maintainers: - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> @@ -13,8 +13,7 @@ $ref: /schemas/display/msm/dpu-common.yaml# properties: compatible: - items: - - const: qcom,sm6115-dpu + const: qcom,sm6115-dpu reg: items: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml index 886858ef6700..2491cb100b33 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml @@ -18,8 +18,7 @@ $ref: /schemas/display/msm/mdss-common.yaml# properties: compatible: - items: - - const: qcom,sm6115-mdss + const: qcom,sm6115-mdss clocks: items: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-dpu.yaml new file mode 100644 index 000000000000..2b3f3fe9bdf7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-dpu.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8150-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8150 Display DPU + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,sm8150-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display ahb clock + - description: Display hf axi clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sm8150.h> + #include <dt-bindings/clock/qcom,gcc-sm8150.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sm8150.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@ae01000 { + compatible = "qcom,sm8150-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM8150_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml new file mode 100644 index 000000000000..5182e958e069 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml @@ -0,0 +1,332 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8150-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8150 Display MDSS + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS are mentioned for SM8150 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,sm8150-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display hf axi clock + - description: Display sf axi clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: nrt_bus + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm8150-dpu + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + items: + - const: qcom,sm8150-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-phy-7nm + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sm8150.h> + #include <dt-bindings/clock/qcom,gcc-sm8150.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sm8150.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,sm8150-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>, + <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "nrt_bus", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x800 0x420>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sm8150-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM8150_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-171428571 { + opp-hz = /bits/ 64 <171428571>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8150_MMCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94900 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + + dsi@ae96000 { + compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8150_MMCX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: phy@ae96400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0x0ae96400 0x200>, + <0x0ae96600 0x280>, + <0x0ae96900 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml index 9ff8a265c85f..687c8c170cd4 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml @@ -39,6 +39,13 @@ properties: - const: core - const: vsync +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml index 0d3be5386b3f..368d3db0ce96 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml @@ -18,8 +18,7 @@ $ref: /schemas/display/msm/mdss-common.yaml# properties: compatible: - items: - - const: qcom,sm8250-mdss + const: qcom,sm8250-mdss clocks: items: @@ -55,7 +54,9 @@ patternProperties: type: object properties: compatible: - const: qcom,mdss-dsi-ctrl + items: + - const: qcom,sm8250-dsi-ctrl + - const: qcom,mdss-dsi-ctrl "^phy@[0-9a-f]+$": type: object @@ -63,6 +64,9 @@ patternProperties: compatible: const: qcom,dsi-phy-7nm +required: + - compatible + unevaluatedProperties: false examples: @@ -167,7 +171,7 @@ examples: }; dsi@ae94000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,sm8250-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x0ae94000 0x400>; reg-names = "dsi_ctrl"; @@ -257,7 +261,7 @@ examples: }; dsi@ae96000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,sm8250-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x0ae96000 0x400>; reg-names = "dsi_ctrl"; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml new file mode 100644 index 000000000000..120500395c9a --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8350-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8350 Display DPU + +maintainers: + - Robert Foss <robert.foss@linaro.org> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,sm8350-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display hf axi clock + - description: Display sf axi clock + - description: Display ahb clock + - description: Display lut clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: bus + - const: nrt_bus + - const: iface + - const: lut + - const: core + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sm8350.h> + #include <dt-bindings/clock/qcom,gcc-sm8350.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sm8350.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@ae01000 { + compatible = "qcom,sm8350-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM8350_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml new file mode 100644 index 000000000000..4d94dbff3054 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml @@ -0,0 +1,223 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8350-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8350 Display MDSS + +maintainers: + - Robert Foss <robert.foss@linaro.org> + +description: + MSM Mobile Display Subsystem(MDSS) that encapsulates sub-blocks like + DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,sm8350-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display hf axi clock + - description: Display sf axi clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: nrt_bus + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: mdp0-mem + - const: mdp1-mem + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm8350-dpu + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + items: + - const: qcom,sm8350-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-phy-5nm-8350 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sm8350.h> + #include <dt-bindings/clock/qcom,gcc-sm8350.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sm8350.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,sm8350-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + power-domains = <&dispcc MDSS_GDSC>; + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "nrt_bus", "core"; + + iommus = <&apps_smmu 0x820 0x402>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sm8350-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM8350_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + dsi0: dsi@ae94000 { + compatible = "qcom,sm8350-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8350_MMCX>; + + phys = <&mdss_dsi0_phy>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml new file mode 100644 index 000000000000..0d17ece1c453 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8450-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8450 Display DPU + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,sm8450-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display hf axi + - description: Display sf axi + - description: Display ahb + - description: Display lut + - description: Display core + - description: Display vsync + + clock-names: + items: + - const: bus + - const: nrt_bus + - const: iface + - const: lut + - const: core + - const: vsync + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm8450-dispcc.h> + #include <dt-bindings/clock/qcom,gcc-sm8450.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sm8450.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@ae01000 { + compatible = "qcom,sm8450-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM8450_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-172000000{ + opp-hz = /bits/ 64 <172000000>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml new file mode 100644 index 000000000000..4c6929e2534c --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml @@ -0,0 +1,345 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8450-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8450 Display MDSS + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +description: + SM8450 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like + DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sm8450-mdss + + clocks: + items: + - description: Display AHB + - description: Display hf AXI + - description: Display sf AXI + - description: Display core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm8450-dpu + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + items: + - const: qcom,sm8450-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-phy-5nm-8450 + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm8450-dispcc.h> + #include <dt-bindings/clock/qcom,gcc-sm8450.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sm8450.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,sm8450-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>, + <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "nrt_bus", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x2800 0x402>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sm8450-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM8450_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-172000000{ + opp-hz = /bits/ 64 <172000000>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8450_MMCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160310000{ + opp-hz = /bits/ 64 <160310000>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-5nm-8450"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94900 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + + dsi@ae96000 { + compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8450_MMCX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: phy@ae96400 { + compatible = "qcom,dsi-phy-5nm-8450"; + reg = <0x0ae96400 0x200>, + <0x0ae96600 0x280>, + <0x0ae96900 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml b/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml new file mode 100644 index 000000000000..86c834eb4d98 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/auo,a030jtn01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AUO A030JTN01 3.0" (320x480 pixels) 24-bit TFT LCD panel + +description: | + Delta RGB 8-bit panel found in some Retrogame handhelds + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + - Christophe Branchereau <cbranchereau@gmail.com> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: auo,a030jtn01 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - power-supply + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "auo,a030jtn01"; + reg = <0>; + + spi-max-frequency = <10000000>; + + reset-gpios = <&gpe 4 GPIO_ACTIVE_LOW>; + power-supply = <&lcd_power>; + + backlight = <&backlight>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml b/Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml new file mode 100644 index 000000000000..d54e96b2a9e1 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/focaltech,gpt3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Focaltech GPT3 3.0" (640x480 pixels) IPS LCD panel + +maintainers: + - Christophe Branchereau <cbranchereau@gmail.com> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: focaltech,gpt3 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - power-supply + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "focaltech,gpt3"; + reg = <0>; + + spi-max-frequency = <3125000>; + + reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>; + + backlight = <&backlight>; + power-supply = <&vcc>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml new file mode 100644 index 000000000000..1b2a1baa26f9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/himax,hx8394.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Himax HX8394 MIPI-DSI LCD panel controller + +maintainers: + - Ondrej Jirman <megi@xff.cz> + - Javier Martinez Canillas <javierm@redhat.com> + +description: + Device tree bindings for panels based on the Himax HX8394 controller, + such as the HannStar HSD060BHW4 720x1440 TFT LCD panel connected with + a MIPI-DSI video interface. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - hannstar,hsd060bhw4 + - const: himax,hx8394 + + reg: true + + reset-gpios: true + + backlight: true + + port: true + + vcc-supply: + description: Panel power supply + + iovcc-supply: + description: I/O voltage supply + +required: + - compatible + - reg + - reset-gpios + - backlight + - port + - vcc-supply + - iovcc-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "hannstar,hsd060bhw4", "himax,hx8394"; + reg = <0>; + vcc-supply = <®_2v8_p>; + iovcc-supply = <®_1v8_p>; + reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml index c2df8d28aaf5..9b701df5e9d2 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml @@ -22,8 +22,9 @@ description: | The standard defines the following interface signals for type C: - Power: - Vdd: Power supply for display module + Called power-supply in this binding. - Vddi: Logic level supply for interface signals - Combined into one in this binding called: power-supply + Called io-supply in this binding. - Interface: - CSx: Chip select - SCL: Serial clock @@ -80,6 +81,11 @@ properties: Controller data/command selection (D/CX) in 4-line SPI mode. If not set, the controller is in 3-line SPI mode. + io-supply: + description: | + Logic level supply for interface signals (Vddi). + No need to set if this is the same as power-supply. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml b/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml new file mode 100644 index 000000000000..84562a5b710a --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/visionox,vtdr6130.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Visionox VTDR6130 AMOLED DSI Panel + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: visionox,vtdr6130 + + reg: + maxItems: 1 + description: DSI virtual channel + + vddio-supply: true + vci-supply: true + vdd-supply: true + port: true + reset-gpios: true + +additionalProperties: false + +required: + - compatible + - reg + - vddio-supply + - vci-supply + - vdd-supply + - reset-gpios + - port + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "visionox,vtdr6130"; + reg = <0>; + + vddio-supply = <&vreg_l12b_1p8>; + vci-supply = <&vreg_l13b_3p0>; + vdd-supply = <&vreg_l11b_1p2>; + + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + port { + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml index b3e588022082..d4830f52c512 100644 --- a/Documentation/devicetree/bindings/display/renesas,du.yaml +++ b/Documentation/devicetree/bindings/display/renesas,du.yaml @@ -40,6 +40,7 @@ properties: - renesas,du-r8a77990 # for R-Car E3 compatible DU - renesas,du-r8a77995 # for R-Car D3 compatible DU - renesas,du-r8a779a0 # for R-Car V3U compatible DU + - renesas,du-r8a779g0 # for R-Car V4H compatible DU reg: maxItems: 1 @@ -762,6 +763,7 @@ allOf: contains: enum: - renesas,du-r8a779a0 + - renesas,du-r8a779g0 then: properties: clocks: diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml index dd64f70b5014..3c9f29e428a4 100644 --- a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml +++ b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml @@ -63,6 +63,11 @@ properties: reg: description: Location and size of the framebuffer memory + memory-region: + maxItems: 1 + description: Phandle to a node describing the memory to be used for the + framebuffer. If present, overrides the "reg" property (if one exists). + clocks: description: List of clocks used by the framebuffer. @@ -94,6 +99,7 @@ properties: * `x1r5g5b5` - 16-bit pixels, d[14:10]=r, d[9:5]=g, d[4:0]=b * `x2r10g10b10` - 32-bit pixels, d[29:20]=r, d[19:10]=g, d[9:0]=b * `x8r8g8b8` - 32-bit pixels, d[23:16]=r, d[15:8]=g, d[7:0]=b + * `x8b8g8r8` - 32-bit pixels, d[23:16]=b, d[15:8]=g, d[7:0]=r enum: - a1r5g5b5 - a2r10g10b10 @@ -105,6 +111,7 @@ properties: - x1r5g5b5 - x2r10g10b10 - x8r8g8b8 + - x8b8g8r8 display: $ref: /schemas/types.yaml#/definitions/phandle diff --git a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml index fdb277edebeb..0c8f03b78608 100644 --- a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml @@ -43,6 +43,9 @@ properties: vddio-supply: description: phandle to VDD I/O supply regulator + '#clock-cells': + const: 0 + '#phy-cells': const: 0 @@ -53,7 +56,6 @@ allOf: contains: enum: - qcom,hdmi-phy-8660 - - qcom,hdmi-phy-8960 then: properties: clocks: @@ -68,6 +70,24 @@ allOf: compatible: contains: enum: + - qcom,hdmi-phy-8960 + then: + properties: + clocks: + minItems: 1 + maxItems: 2 + clock-names: + minItems: 1 + items: + - const: slave_iface + - const: pxo + vddio-supply: false + + - if: + properties: + compatible: + contains: + enum: - qcom,hdmi-phy-8084 - qcom,hdmi-phy-8974 then: @@ -96,9 +116,10 @@ examples: "hdmi_pll"; reg = <0x4a00400 0x60>, <0x4a00500 0x100>; + #clock-cells = <0>; #phy-cells = <0>; power-domains = <&mmcc 1>; - clock-names = "slave_iface"; - clocks = <&clk 21>; + clock-names = "slave_iface", "pxo"; + clocks = <&clk 21>, <&pxo_board>; core-vdda-supply = <&pm8921_hdmi_mvs>; }; diff --git a/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml b/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml new file mode 100644 index 000000000000..05b6648b3458 --- /dev/null +++ b/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reserved-memory/framebuffer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: /reserved-memory framebuffer node bindings + +maintainers: + - devicetree-spec@vger.kernel.org + +allOf: + - $ref: reserved-memory.yaml + +properties: + compatible: + const: framebuffer + description: > + This indicates a region of memory meant to be used as a framebuffer for + a set of display devices. It can be used by an operating system to keep + the framebuffer from being overwritten and use it as the backing memory + for a display device (such as simple-framebuffer). + +unevaluatedProperties: false + +examples: + - | + / { + compatible = "foo"; + model = "foo"; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + framebuffer { + compatible = "simple-framebuffer"; + memory-region = <&fb>; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + fb: framebuffer@80000000 { + compatible = "framebuffer"; + reg = <0x80000000 0x007e9000>; + }; + }; + }; +... diff --git a/Documentation/fb/modedb.rst b/Documentation/fb/modedb.rst index e53375033146..bb2889c6ea27 100644 --- a/Documentation/fb/modedb.rst +++ b/Documentation/fb/modedb.rst @@ -29,7 +29,10 @@ Things between square brackets are optional. Valid names are:: - NSTC: 480i output, with the CCIR System-M TV mode and NTSC color encoding + - NTSC-J: 480i output, with the CCIR System-M TV mode, the NTSC color + encoding, and a black level equal to the blanking level. - PAL: 576i output, with the CCIR System-B TV mode and PAL color encoding + - PAL-M: 480i output, with the CCIR System-M TV mode and PAL color encoding If 'M' is specified in the mode_option argument (after <yres> and before <bpp> and <refresh>, if specified) the timings will be calculated using @@ -70,6 +73,8 @@ Valid options are:: - reflect_y (boolean): Perform an axial symmetry on the Y axis - rotate (integer): Rotate the initial framebuffer by x degrees. Valid values are 0, 90, 180 and 270. + - tv_mode: Analog TV mode. One of "NTSC", "NTSC-443", "NTSC-J", "PAL", + "PAL-M", "PAL-N", or "SECAM". - panel_orientation, one of "normal", "upside_down", "left_side_up", or "right_side_up". For KMS drivers only, this sets the "panel orientation" property on the kms connector as hint for kms users. diff --git a/Documentation/gpu/amdgpu/apu-asic-info-table.csv b/Documentation/gpu/amdgpu/apu-asic-info-table.csv index 98c6988e424e..395a7b7bfaef 100644 --- a/Documentation/gpu/amdgpu/apu-asic-info-table.csv +++ b/Documentation/gpu/amdgpu/apu-asic-info-table.csv @@ -1,8 +1,10 @@ -Product Name, Code Reference, DCN/DCE version, GC version, VCE/UVD/VCN version, SDMA version -Radeon R* Graphics, CARRIZO/STONEY, DCE 11, 8, VCE 3 / UVD 6, 3 -Ryzen 3000 series / AMD Ryzen Embedded V1*/R1* with Radeon Vega Gfx, RAVEN/PICASSO, DCN 1.0, 9.1.0, VCN 1.0, 4.1.0 -Ryzen 4000 series, RENOIR, DCN 2.1, 9.3, VCN 2.2, 4.1.2 -Ryzen 3000 series / AMD Ryzen Embedded V1*/R1* with Radeon Vega Gfx, RAVEN2, DCN 1.0, 9.2.2, VCN 1.0.1, 4.1.1 -SteamDeck, VANGOGH, DCN 3.0.1, 10.3.1, VCN 3.1.0, 5.2.1 -Ryzen 5000 series, GREEN SARDINE, DCN 2.1, 9.3, VCN 2.2, 4.1.1 -Ryzen 6000 Zen, YELLOW CARP, 3.1.2, 10.3.3, VCN 3.1.1, 5.2.3 +Product Name, Code Reference, DCN/DCE version, GC version, VCE/UVD/VCN version, SDMA version, MP0 version +Radeon R* Graphics, CARRIZO/STONEY, DCE 11, 8, VCE 3 / UVD 6, 3, n/a +Ryzen 3000 series / AMD Ryzen Embedded V1*/R1* with Radeon Vega Gfx, RAVEN/PICASSO, DCN 1.0, 9.1.0, VCN 1.0, 4.1.0, 10.0.0 +Ryzen 4000 series, RENOIR, DCN 2.1, 9.3, VCN 2.2, 4.1.2, 11.0.3 +Ryzen 3000 series / AMD Ryzen Embedded V1*/R1* with Radeon Vega Gfx, RAVEN2, DCN 1.0, 9.2.2, VCN 1.0.1, 4.1.1, 10.0.1 +SteamDeck, VANGOGH, DCN 3.0.1, 10.3.1, VCN 3.1.0, 5.2.1, 11.5.0 +Ryzen 5000 series / Ryzen 7x30 series, GREEN SARDINE / Cezanne / Barcelo / Barcelo-R, DCN 2.1, 9.3, VCN 2.2, 4.1.1, 12.0.1 +Ryzen 6000 series / Ryzen 7x35 series, YELLOW CARP / Rembrandt / Rembrandt+, 3.1.2, 10.3.3, VCN 3.1.1, 5.2.3, 13.0.3 +Ryzen 7000 series (AM5), Raphael, 3.1.5, 10.3.6, 3.1.2, 5.2.6, 13.0.5 +Ryzen 7x20 series, Mendocino, 3.1.6, 10.3.7, 3.1.1, 5.2.7, 13.0.8 diff --git a/Documentation/gpu/amdgpu/dgpu-asic-info-table.csv b/Documentation/gpu/amdgpu/dgpu-asic-info-table.csv index 84617aa35dab..882d2518f8ed 100644 --- a/Documentation/gpu/amdgpu/dgpu-asic-info-table.csv +++ b/Documentation/gpu/amdgpu/dgpu-asic-info-table.csv @@ -22,3 +22,5 @@ AMD Radeon RX 6800(XT) /6900(XT) /W6800, SIENNA_CICHLID, DCN 3.0.0, 10.3.0, VCN AMD Radeon RX 6700 XT / 6800M / 6700M, NAVY_FLOUNDER, DCN 3.0.0, 10.3.2, VCN 3.0.0, 5.2.2 AMD Radeon RX 6600(XT) /6600M /W6600 /W6600M, DIMGREY_CAVEFISH, DCN 3.0.2, 10.3.4, VCN 3.0.16, 5.2.4 AMD Radeon RX 6500M /6300M /W6500M /W6300M, BEIGE_GOBY, DCN 3.0.3, 10.3.5, VCN 3.0.33, 5.2.5 +AMD Radeon RX 7900 XT /XTX, , DCN 3.2.0, 11.0.0, VCN 4.0.0, 6.0.0 +AMD Radeon RX 7600M (XT) /7700S /7600S, , DCN 3.2.1, 11.0.2, VCN 4.0.4, 6.0.2 diff --git a/Documentation/gpu/amdgpu/driver-misc.rst b/Documentation/gpu/amdgpu/driver-misc.rst index 1800543d45f7..be131e963d87 100644 --- a/Documentation/gpu/amdgpu/driver-misc.rst +++ b/Documentation/gpu/amdgpu/driver-misc.rst @@ -37,7 +37,7 @@ Accelerated Processing Units (APU) Info .. csv-table:: :header-rows: 1 - :widths: 3, 2, 2, 1, 1, 1 + :widths: 3, 2, 2, 1, 1, 1, 1 :file: ./apu-asic-info-table.csv Discrete GPU Info diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst index a4860ffd6e86..b8ab05e42dbb 100644 --- a/Documentation/gpu/drm-kms-helpers.rst +++ b/Documentation/gpu/drm-kms-helpers.rst @@ -188,6 +188,13 @@ Bridge Helper Reference .. kernel-doc:: drivers/gpu/drm/drm_bridge.c :export: +MIPI-DSI bridge operation +------------------------- + +.. kernel-doc:: drivers/gpu/drm/drm_bridge.c + :doc: dsi bridge operations + + Bridge Connector Helper Reference --------------------------------- diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst index b4377a545425..c92d425cb2dd 100644 --- a/Documentation/gpu/drm-kms.rst +++ b/Documentation/gpu/drm-kms.rst @@ -520,6 +520,12 @@ HDMI Specific Connector Properties .. kernel-doc:: drivers/gpu/drm/drm_connector.c :doc: HDMI connector properties +Analog TV Specific Connector Properties +--------------------------------------- + +.. kernel-doc:: drivers/gpu/drm/drm_connector.c + :doc: Analog TV Connector Properties + Standard CRTC Properties ------------------------ diff --git a/Documentation/gpu/drm-uapi.rst b/Documentation/gpu/drm-uapi.rst index ce47b4292481..65fb3036a580 100644 --- a/Documentation/gpu/drm-uapi.rst +++ b/Documentation/gpu/drm-uapi.rst @@ -402,19 +402,19 @@ It's possible to run the IGT-tests in a VM in two ways: 1. Use IGT inside a VM 2. Use IGT from the host machine and write the results in a shared directory. -As follow, there is an example of using a VM with a shared directory with -the host machine to run igt-tests. As an example it's used virtme:: +Following is an example of using a VM with a shared directory with +the host machine to run igt-tests. This example uses virtme:: $ virtme-run --rwdir /path/for/shared_dir --kdir=path/for/kernel/directory --mods=auto -Run the igt-tests in the guest machine, as example it's ran the 'kms_flip' +Run the igt-tests in the guest machine. This example runs the 'kms_flip' tests:: $ /path/for/igt-gpu-tools/scripts/run-tests.sh -p -s -t "kms_flip.*" -v -In this example, instead of build the igt_runner, Piglit is used -(-p option); it's created html summary of the tests results and it's saved -in the folder "igt-gpu-tools/results"; it's executed only the igt-tests +In this example, instead of building the igt_runner, Piglit is used +(-p option). It creates an HTML summary of the test results and saves +them in the folder "igt-gpu-tools/results". It executes only the igt-tests matching the -t option. Display CRC Support diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index b2c6aaf1edf2..1f8a5ebe188e 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -508,17 +508,18 @@ Clean up the debugfs support There's a bunch of issues with it: -- The drm_info_list ->show() function doesn't even bother to cast to the drm - structure for you. This is lazy. +- Convert drivers to support the drm_debugfs_add_files() function instead of + the drm_debugfs_create_files() function. + +- Improve late-register debugfs by rolling out the same debugfs pre-register + infrastructure for connector and crtc too. That way, the drivers won't need to + split their setup code into init and register anymore. - We probably want to have some support for debugfs files on crtc/connectors and maybe other kms objects directly in core. There's even drm_print support in the funcs for these objects to dump kms state, so it's all there. And then the ->show() functions should obviously give you a pointer to the right object. -- The drm_info_list stuff is centered on drm_minor instead of drm_device. For - anything we want to print drm_device (or maybe drm_file) is the right thing. - - The drm_driver->debugfs_init hooks we have is just an artifact of the old midlayered load sequence. DRM debugfs should work more like sysfs, where you can create properties/files for an object anytime you want, and the core @@ -527,8 +528,6 @@ There's a bunch of issues with it: this (together with the drm_minor->drm_device move) would allow us to remove debugfs_init. -Previous RFC that hasn't landed yet: https://lore.kernel.org/dri-devel/20200513114130.28641-2-wambui.karugax@gmail.com/ - Contact: Daniel Vetter Level: Intermediate diff --git a/Documentation/gpu/vc4.rst b/Documentation/gpu/vc4.rst index 5df1d98b9544..5e5e92e40919 100644 --- a/Documentation/gpu/vc4.rst +++ b/Documentation/gpu/vc4.rst @@ -54,6 +54,25 @@ VEC (Composite TV out) encoder .. kernel-doc:: drivers/gpu/drm/vc4/vc4_vec.c :doc: VC4 SDTV module +KUnit Tests +=========== + +The VC4 Driver uses KUnit to perform driver-specific unit and +integration tests. + +These tests are using a mock driver and can be ran using the +command below, on either arm or arm64 architectures, + +.. code-block:: bash + + $ ./tools/testing/kunit/kunit.py run \ + --kunitconfig=drivers/gpu/drm/vc4/tests/.kunitconfig \ + --cross_compile aarch64-linux-gnu- --arch arm64 + +Parts of the driver that are currently covered by tests are: + * The HVS to PixelValve dynamic FIFO assignment, for the BCM2835-7 + and BCM2711. + Memory Management and 3D Command Submission =========================================== diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst index 362bee0be8ab..0a1882e296ae 100644 --- a/Documentation/userspace-api/ioctl/ioctl-number.rst +++ b/Documentation/userspace-api/ioctl/ioctl-number.rst @@ -221,6 +221,7 @@ Code Seq# Include File Comments 'a' 00-0F drivers/crypto/qat/qat_common/adf_cfg_common.h conflict! qat driver 'b' 00-FF conflict! bit3 vme host bridge <mailto:natalia@nikhefk.nikhef.nl> +'b' 00-0F linux/dma-buf.h conflict! 'c' all linux/cm4000_cs.h conflict! 'c' 00-7F linux/comstats.h conflict! 'c' 00-7F linux/coda.h conflict! diff --git a/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst b/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst index bf283a1b5581..24a771542059 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst @@ -262,7 +262,12 @@ the second byte and Y'\ :sub:`7-0` in the third byte. ================= These formats, commonly referred to as YUYV or YUY2, subsample the chroma -components horizontally by 2, storing 2 pixels in 4 bytes. +components horizontally by 2, storing 2 pixels in a container. The container +is 32-bits for 8-bit formats, and 64-bits for 10+-bit formats. + +The packed YUYV formats with more than 8 bits per component are stored as four +16-bit little-endian words. Each word's most significant bits contain one +component, and the least significant bits are zero padding. .. raw:: latex @@ -270,7 +275,7 @@ components horizontally by 2, storing 2 pixels in 4 bytes. .. tabularcolumns:: |p{3.4cm}|p{1.2cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}| -.. flat-table:: Packed YUV 4:2:2 Formats +.. flat-table:: Packed YUV 4:2:2 Formats in 32-bit container :header-rows: 1 :stub-columns: 0 @@ -337,6 +342,46 @@ components horizontally by 2, storing 2 pixels in 4 bytes. - Y'\ :sub:`3` - Cb\ :sub:`2` +.. tabularcolumns:: |p{3.4cm}|p{1.2cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}| + +.. flat-table:: Packed YUV 4:2:2 Formats in 64-bit container + :header-rows: 1 + :stub-columns: 0 + + * - Identifier + - Code + - Word 0 + - Word 1 + - Word 2 + - Word 3 + * .. _V4L2-PIX-FMT-Y210: + + - ``V4L2_PIX_FMT_Y210`` + - 'Y210' + + - Y'\ :sub:`0` (bits 15-6) + - Cb\ :sub:`0` (bits 15-6) + - Y'\ :sub:`1` (bits 15-6) + - Cr\ :sub:`0` (bits 15-6) + * .. _V4L2-PIX-FMT-Y212: + + - ``V4L2_PIX_FMT_Y212`` + - 'Y212' + + - Y'\ :sub:`0` (bits 15-4) + - Cb\ :sub:`0` (bits 15-4) + - Y'\ :sub:`1` (bits 15-4) + - Cr\ :sub:`0` (bits 15-4) + * .. _V4L2-PIX-FMT-Y216: + + - ``V4L2_PIX_FMT_Y216`` + - 'Y216' + + - Y'\ :sub:`0` (bits 15-0) + - Cb\ :sub:`0` (bits 15-0) + - Y'\ :sub:`1` (bits 15-0) + - Cr\ :sub:`0` (bits 15-0) + .. raw:: latex \normalsize diff --git a/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst b/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst index 30f51cd33f99..d330aeb4d3eb 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst @@ -763,6 +763,200 @@ nomenclature that instead use the order of components as seen in a 24- or \normalsize +10 Bits Per Component +===================== + +These formats store a 30-bit RGB triplet with an optional 2 bit alpha in four +bytes. They are named based on the order of the RGB components as seen in a +32-bit word, which is then stored in memory in little endian byte order +(unless otherwise noted by the presence of bit 31 in the 4CC value), and on the +number of bits for each component. + +.. raw:: latex + + \begingroup + \tiny + \setlength{\tabcolsep}{2pt} + +.. tabularcolumns:: |p{2.8cm}|p{2.0cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}| + + +.. flat-table:: RGB Formats 10 Bits Per Color Component + :header-rows: 2 + :stub-columns: 0 + + * - Identifier + - Code + - :cspan:`7` Byte 0 in memory + - :cspan:`7` Byte 1 + - :cspan:`7` Byte 2 + - :cspan:`7` Byte 3 + * - + - + - 7 + - 6 + - 5 + - 4 + - 3 + - 2 + - 1 + - 0 + + - 7 + - 6 + - 5 + - 4 + - 3 + - 2 + - 1 + - 0 + + - 7 + - 6 + - 5 + - 4 + - 3 + - 2 + - 1 + - 0 + + - 7 + - 6 + - 5 + - 4 + - 3 + - 2 + - 1 + - 0 + * .. _V4L2-PIX-FMT-RGBX1010102: + + - ``V4L2_PIX_FMT_RGBX1010102`` + - 'RX30' + + - b\ :sub:`5` + - b\ :sub:`4` + - b\ :sub:`3` + - b\ :sub:`2` + - b\ :sub:`1` + - b\ :sub:`0` + - x + - x + + - g\ :sub:`3` + - g\ :sub:`2` + - g\ :sub:`1` + - g\ :sub:`0` + - b\ :sub:`9` + - b\ :sub:`8` + - b\ :sub:`7` + - b\ :sub:`6` + + - r\ :sub:`1` + - r\ :sub:`0` + - g\ :sub:`9` + - g\ :sub:`8` + - g\ :sub:`7` + - g\ :sub:`6` + - g\ :sub:`5` + - g\ :sub:`4` + + - r\ :sub:`9` + - r\ :sub:`8` + - r\ :sub:`7` + - r\ :sub:`6` + - r\ :sub:`5` + - r\ :sub:`4` + - r\ :sub:`3` + - r\ :sub:`2` + - + * .. _V4L2-PIX-FMT-RGBA1010102: + + - ``V4L2_PIX_FMT_RGBA1010102`` + - 'RA30' + + - b\ :sub:`5` + - b\ :sub:`4` + - b\ :sub:`3` + - b\ :sub:`2` + - b\ :sub:`1` + - b\ :sub:`0` + - a\ :sub:`1` + - a\ :sub:`0` + + - g\ :sub:`3` + - g\ :sub:`2` + - g\ :sub:`1` + - g\ :sub:`0` + - b\ :sub:`9` + - b\ :sub:`8` + - b\ :sub:`7` + - b\ :sub:`6` + + - r\ :sub:`1` + - r\ :sub:`0` + - g\ :sub:`9` + - g\ :sub:`8` + - g\ :sub:`7` + - g\ :sub:`6` + - g\ :sub:`5` + - g\ :sub:`4` + + - r\ :sub:`9` + - r\ :sub:`8` + - r\ :sub:`7` + - r\ :sub:`6` + - r\ :sub:`5` + - r\ :sub:`4` + - r\ :sub:`3` + - r\ :sub:`2` + - + * .. _V4L2-PIX-FMT-ARGB2101010: + + - ``V4L2_PIX_FMT_ARGB2101010`` + - 'AR30' + + - b\ :sub:`7` + - b\ :sub:`6` + - b\ :sub:`5` + - b\ :sub:`4` + - b\ :sub:`3` + - b\ :sub:`2` + - b\ :sub:`1` + - b\ :sub:`0` + + - g\ :sub:`5` + - g\ :sub:`4` + - g\ :sub:`3` + - g\ :sub:`2` + - g\ :sub:`1` + - g\ :sub:`0` + - b\ :sub:`9` + - b\ :sub:`8` + + - r\ :sub:`3` + - r\ :sub:`2` + - r\ :sub:`1` + - r\ :sub:`0` + - g\ :sub:`9` + - g\ :sub:`8` + - g\ :sub:`7` + - g\ :sub:`6` + + - a\ :sub:`1` + - a\ :sub:`0` + - r\ :sub:`9` + - r\ :sub:`8` + - r\ :sub:`7` + - r\ :sub:`6` + - r\ :sub:`5` + - r\ :sub:`4` + - + +.. raw:: latex + + \endgroup + + Deprecated RGB Formats ====================== diff --git a/Documentation/userspace-api/media/v4l/subdev-formats.rst b/Documentation/userspace-api/media/v4l/subdev-formats.rst index 16ef3b41932e..a3a35eeed708 100644 --- a/Documentation/userspace-api/media/v4l/subdev-formats.rst +++ b/Documentation/userspace-api/media/v4l/subdev-formats.rst @@ -949,6 +949,43 @@ The following tables list existing packed RGB formats. - b\ :sub:`2` - b\ :sub:`1` - b\ :sub:`0` + * .. _MEDIA-BUS-FMT-BGR666-1X18: + + - MEDIA_BUS_FMT_BGR666_1X18 + - 0x1023 + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - b\ :sub:`5` + - b\ :sub:`4` + - b\ :sub:`3` + - b\ :sub:`2` + - b\ :sub:`1` + - b\ :sub:`0` + - g\ :sub:`5` + - g\ :sub:`4` + - g\ :sub:`3` + - g\ :sub:`2` + - g\ :sub:`1` + - g\ :sub:`0` + - r\ :sub:`5` + - r\ :sub:`4` + - r\ :sub:`3` + - r\ :sub:`2` + - r\ :sub:`1` + - r\ :sub:`0` * .. _MEDIA-BUS-FMT-RBG888-1X24: - MEDIA_BUS_FMT_RBG888_1X24 @@ -1023,6 +1060,80 @@ The following tables list existing packed RGB formats. - b\ :sub:`2` - b\ :sub:`1` - b\ :sub:`0` + * .. _MEDIA-BUS-FMT-BGR666-1X24_CPADHI: + + - MEDIA_BUS_FMT_BGR666_1X24_CPADHI + - 0x1024 + - + - + - + - + - + - + - + - + - + - 0 + - 0 + - b\ :sub:`5` + - b\ :sub:`4` + - b\ :sub:`3` + - b\ :sub:`2` + - b\ :sub:`1` + - b\ :sub:`0` + - 0 + - 0 + - g\ :sub:`5` + - g\ :sub:`4` + - g\ :sub:`3` + - g\ :sub:`2` + - g\ :sub:`1` + - g\ :sub:`0` + - 0 + - 0 + - r\ :sub:`5` + - r\ :sub:`4` + - r\ :sub:`3` + - r\ :sub:`2` + - r\ :sub:`1` + - r\ :sub:`0` + * .. _MEDIA-BUS-FMT-RGB565-1X24_CPADHI: + + - MEDIA_BUS_FMT_RGB565_1X24_CPADHI + - 0x1022 + - + - + - + - + - + - + - + - + - + - 0 + - 0 + - 0 + - r\ :sub:`4` + - r\ :sub:`3` + - r\ :sub:`2` + - r\ :sub:`1` + - r\ :sub:`0` + - 0 + - 0 + - g\ :sub:`5` + - g\ :sub:`4` + - g\ :sub:`3` + - g\ :sub:`2` + - g\ :sub:`1` + - g\ :sub:`0` + - 0 + - 0 + - 0 + - b\ :sub:`4` + - b\ :sub:`3` + - b\ :sub:`2` + - b\ :sub:`1` + - b\ :sub:`0` * .. _MEDIA-BUS-FMT-BGR888-1X24: - MEDIA_BUS_FMT_BGR888_1X24 |