diff options
Diffstat (limited to 'arch/alpha/include/asm')
| -rw-r--r-- | arch/alpha/include/asm/core_apecs.h | 534 | ||||
| -rw-r--r-- | arch/alpha/include/asm/core_lca.h | 378 | ||||
| -rw-r--r-- | arch/alpha/include/asm/core_t2.h | 8 | ||||
| -rw-r--r-- | arch/alpha/include/asm/dma-mapping.h | 4 | ||||
| -rw-r--r-- | arch/alpha/include/asm/dma.h | 9 | ||||
| -rw-r--r-- | arch/alpha/include/asm/elf.h | 4 | ||||
| -rw-r--r-- | arch/alpha/include/asm/io.h | 26 | ||||
| -rw-r--r-- | arch/alpha/include/asm/irq.h | 10 | ||||
| -rw-r--r-- | arch/alpha/include/asm/jensen.h | 363 | ||||
| -rw-r--r-- | arch/alpha/include/asm/machvec.h | 9 | ||||
| -rw-r--r-- | arch/alpha/include/asm/mmu_context.h | 45 | ||||
| -rw-r--r-- | arch/alpha/include/asm/special_insns.h | 5 | ||||
| -rw-r--r-- | arch/alpha/include/asm/tlbflush.h | 37 | ||||
| -rw-r--r-- | arch/alpha/include/asm/uaccess.h | 80 | ||||
| -rw-r--r-- | arch/alpha/include/asm/vga.h | 2 |
15 files changed, 14 insertions, 1500 deletions
diff --git a/arch/alpha/include/asm/core_apecs.h b/arch/alpha/include/asm/core_apecs.h deleted file mode 100644 index 69a2fc62c9c3..000000000000 --- a/arch/alpha/include/asm/core_apecs.h +++ /dev/null @@ -1,534 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ALPHA_APECS__H__ -#define __ALPHA_APECS__H__ - -#include <linux/types.h> -#include <asm/compiler.h> - -/* - * APECS is the internal name for the 2107x chipset which provides - * memory controller and PCI access for the 21064 chip based systems. - * - * This file is based on: - * - * DECchip 21071-AA and DECchip 21072-AA Core Logic Chipsets - * Data Sheet - * - * EC-N0648-72 - * - * - * david.rusling@reo.mts.dec.com Initial Version. - * - */ - -/* - An AVANTI *might* be an XL, and an XL has only 27 bits of ISA address - that get passed through the PCI<->ISA bridge chip. So we've gotta use - both windows to max out the physical memory we can DMA to. Sigh... - - If we try a window at 0 for 1GB as a work-around, we run into conflicts - with ISA/PCI bus memory which can't be relocated, like VGA aperture and - BIOS ROMs. So we must put the windows high enough to avoid these areas. - - We put window 1 at BUS 64Mb for 64Mb, mapping physical 0 to 64Mb-1, - and window 2 at BUS 1Gb for 1Gb, mapping physical 0 to 1Gb-1. - Yes, this does map 0 to 64Mb-1 twice, but only window 1 will actually - be used for that range (via virt_to_bus()). - - Note that we actually fudge the window 1 maximum as 48Mb instead of 64Mb, - to keep virt_to_bus() from returning an address in the first window, for - a data area that goes beyond the 64Mb first DMA window. Sigh... - The fudge factor MUST match with <asm/dma.h> MAX_DMA_ADDRESS, but - we can't just use that here, because of header file looping... :-( - - Window 1 will be used for all DMA from the ISA bus; yes, that does - limit what memory an ISA floppy or sound card or Ethernet can touch, but - it's also a known limitation on other platforms as well. We use the - same technique that is used on INTEL platforms with similar limitation: - set MAX_DMA_ADDRESS and clear some pages' DMAable flags during mem_init(). - We trust that any ISA bus device drivers will *always* ask for DMAable - memory explicitly via kmalloc()/get_free_pages() flags arguments. - - Note that most PCI bus devices' drivers do *not* explicitly ask for - DMAable memory; they count on being able to DMA to any memory they - get from kmalloc()/get_free_pages(). They will also use window 1 for - any physical memory accesses below 64Mb; the rest will be handled by - window 2, maxing out at 1Gb of memory. I trust this is enough... :-) - - We hope that the area before the first window is large enough so that - there will be no overlap at the top end (64Mb). We *must* locate the - PCI cards' memory just below window 1, so that there's still the - possibility of being able to access it via SPARSE space. This is - important for cards such as the Matrox Millennium, whose Xserver - wants to access memory-mapped registers in byte and short lengths. - - Note that the XL is treated differently from the AVANTI, even though - for most other things they are identical. It didn't seem reasonable to - make the AVANTI support pay for the limitations of the XL. It is true, - however, that an XL kernel will run on an AVANTI without problems. - - %%% All of this should be obviated by the ability to route - everything through the iommu. -*/ - -/* - * 21071-DA Control and Status registers. - * These are used for PCI memory access. - */ -#define APECS_IOC_DCSR (IDENT_ADDR + 0x1A0000000UL) -#define APECS_IOC_PEAR (IDENT_ADDR + 0x1A0000020UL) -#define APECS_IOC_SEAR (IDENT_ADDR + 0x1A0000040UL) -#define APECS_IOC_DR1 (IDENT_ADDR + 0x1A0000060UL) -#define APECS_IOC_DR2 (IDENT_ADDR + 0x1A0000080UL) -#define APECS_IOC_DR3 (IDENT_ADDR + 0x1A00000A0UL) - -#define APECS_IOC_TB1R (IDENT_ADDR + 0x1A00000C0UL) -#define APECS_IOC_TB2R (IDENT_ADDR + 0x1A00000E0UL) - -#define APECS_IOC_PB1R (IDENT_ADDR + 0x1A0000100UL) -#define APECS_IOC_PB2R (IDENT_ADDR + 0x1A0000120UL) - -#define APECS_IOC_PM1R (IDENT_ADDR + 0x1A0000140UL) -#define APECS_IOC_PM2R (IDENT_ADDR + 0x1A0000160UL) - -#define APECS_IOC_HAXR0 (IDENT_ADDR + 0x1A0000180UL) -#define APECS_IOC_HAXR1 (IDENT_ADDR + 0x1A00001A0UL) -#define APECS_IOC_HAXR2 (IDENT_ADDR + 0x1A00001C0UL) - -#define APECS_IOC_PMLT (IDENT_ADDR + 0x1A00001E0UL) - -#define APECS_IOC_TLBTAG0 (IDENT_ADDR + 0x1A0000200UL) -#define APECS_IOC_TLBTAG1 (IDENT_ADDR + 0x1A0000220UL) -#define APECS_IOC_TLBTAG2 (IDENT_ADDR + 0x1A0000240UL) -#define APECS_IOC_TLBTAG3 (IDENT_ADDR + 0x1A0000260UL) -#define APECS_IOC_TLBTAG4 (IDENT_ADDR + 0x1A0000280UL) -#define APECS_IOC_TLBTAG5 (IDENT_ADDR + 0x1A00002A0UL) -#define APECS_IOC_TLBTAG6 (IDENT_ADDR + 0x1A00002C0UL) -#define APECS_IOC_TLBTAG7 (IDENT_ADDR + 0x1A00002E0UL) - -#define APECS_IOC_TLBDATA0 (IDENT_ADDR + 0x1A0000300UL) -#define APECS_IOC_TLBDATA1 (IDENT_ADDR + 0x1A0000320UL) -#define APECS_IOC_TLBDATA2 (IDENT_ADDR + 0x1A0000340UL) -#define APECS_IOC_TLBDATA3 (IDENT_ADDR + 0x1A0000360UL) -#define APECS_IOC_TLBDATA4 (IDENT_ADDR + 0x1A0000380UL) -#define APECS_IOC_TLBDATA5 (IDENT_ADDR + 0x1A00003A0UL) -#define APECS_IOC_TLBDATA6 (IDENT_ADDR + 0x1A00003C0UL) -#define APECS_IOC_TLBDATA7 (IDENT_ADDR + 0x1A00003E0UL) - -#define APECS_IOC_TBIA (IDENT_ADDR + 0x1A0000400UL) - - -/* - * 21071-CA Control and Status registers. - * These are used to program memory timing, - * configure memory and initialise the B-Cache. - */ -#define APECS_MEM_GCR (IDENT_ADDR + 0x180000000UL) -#define APECS_MEM_EDSR (IDENT_ADDR + 0x180000040UL) -#define APECS_MEM_TAR (IDENT_ADDR + 0x180000060UL) -#define APECS_MEM_ELAR (IDENT_ADDR + 0x180000080UL) -#define APECS_MEM_EHAR (IDENT_ADDR + 0x1800000a0UL) -#define APECS_MEM_SFT_RST (IDENT_ADDR + 0x1800000c0UL) -#define APECS_MEM_LDxLAR (IDENT_ADDR + 0x1800000e0UL) -#define APECS_MEM_LDxHAR (IDENT_ADDR + 0x180000100UL) -#define APECS_MEM_GTR (IDENT_ADDR + 0x180000200UL) -#define APECS_MEM_RTR (IDENT_ADDR + 0x180000220UL) -#define APECS_MEM_VFPR (IDENT_ADDR + 0x180000240UL) -#define APECS_MEM_PDLDR (IDENT_ADDR + 0x180000260UL) -#define APECS_MEM_PDhDR (IDENT_ADDR + 0x180000280UL) - -/* Bank x Base Address Register */ -#define APECS_MEM_B0BAR (IDENT_ADDR + 0x180000800UL) -#define APECS_MEM_B1BAR (IDENT_ADDR + 0x180000820UL) -#define APECS_MEM_B2BAR (IDENT_ADDR + 0x180000840UL) -#define APECS_MEM_B3BAR (IDENT_ADDR + 0x180000860UL) -#define APECS_MEM_B4BAR (IDENT_ADDR + 0x180000880UL) -#define APECS_MEM_B5BAR (IDENT_ADDR + 0x1800008A0UL) -#define APECS_MEM_B6BAR (IDENT_ADDR + 0x1800008C0UL) -#define APECS_MEM_B7BAR (IDENT_ADDR + 0x1800008E0UL) -#define APECS_MEM_B8BAR (IDENT_ADDR + 0x180000900UL) - -/* Bank x Configuration Register */ -#define APECS_MEM_B0BCR (IDENT_ADDR + 0x180000A00UL) -#define APECS_MEM_B1BCR (IDENT_ADDR + 0x180000A20UL) -#define APECS_MEM_B2BCR (IDENT_ADDR + 0x180000A40UL) -#define APECS_MEM_B3BCR (IDENT_ADDR + 0x180000A60UL) -#define APECS_MEM_B4BCR (IDENT_ADDR + 0x180000A80UL) -#define APECS_MEM_B5BCR (IDENT_ADDR + 0x180000AA0UL) -#define APECS_MEM_B6BCR (IDENT_ADDR + 0x180000AC0UL) -#define APECS_MEM_B7BCR (IDENT_ADDR + 0x180000AE0UL) -#define APECS_MEM_B8BCR (IDENT_ADDR + 0x180000B00UL) - -/* Bank x Timing Register A */ -#define APECS_MEM_B0TRA (IDENT_ADDR + 0x180000C00UL) -#define APECS_MEM_B1TRA (IDENT_ADDR + 0x180000C20UL) -#define APECS_MEM_B2TRA (IDENT_ADDR + 0x180000C40UL) -#define APECS_MEM_B3TRA (IDENT_ADDR + 0x180000C60UL) -#define APECS_MEM_B4TRA (IDENT_ADDR + 0x180000C80UL) -#define APECS_MEM_B5TRA (IDENT_ADDR + 0x180000CA0UL) -#define APECS_MEM_B6TRA (IDENT_ADDR + 0x180000CC0UL) -#define APECS_MEM_B7TRA (IDENT_ADDR + 0x180000CE0UL) -#define APECS_MEM_B8TRA (IDENT_ADDR + 0x180000D00UL) - -/* Bank x Timing Register B */ -#define APECS_MEM_B0TRB (IDENT_ADDR + 0x180000E00UL) -#define APECS_MEM_B1TRB (IDENT_ADDR + 0x180000E20UL) -#define APECS_MEM_B2TRB (IDENT_ADDR + 0x180000E40UL) -#define APECS_MEM_B3TRB (IDENT_ADDR + 0x180000E60UL) -#define APECS_MEM_B4TRB (IDENT_ADDR + 0x180000E80UL) -#define APECS_MEM_B5TRB (IDENT_ADDR + 0x180000EA0UL) -#define APECS_MEM_B6TRB (IDENT_ADDR + 0x180000EC0UL) -#define APECS_MEM_B7TRB (IDENT_ADDR + 0x180000EE0UL) -#define APECS_MEM_B8TRB (IDENT_ADDR + 0x180000F00UL) - - -/* - * Memory spaces: - */ -#define APECS_IACK_SC (IDENT_ADDR + 0x1b0000000UL) -#define APECS_CONF (IDENT_ADDR + 0x1e0000000UL) -#define APECS_IO (IDENT_ADDR + 0x1c0000000UL) -#define APECS_SPARSE_MEM (IDENT_ADDR + 0x200000000UL) -#define APECS_DENSE_MEM (IDENT_ADDR + 0x300000000UL) - - -/* - * Bit definitions for I/O Controller status register 0: - */ -#define APECS_IOC_STAT0_CMD 0xf -#define APECS_IOC_STAT0_ERR (1<<4) -#define APECS_IOC_STAT0_LOST (1<<5) -#define APECS_IOC_STAT0_THIT (1<<6) -#define APECS_IOC_STAT0_TREF (1<<7) -#define APECS_IOC_STAT0_CODE_SHIFT 8 -#define APECS_IOC_STAT0_CODE_MASK 0x7 -#define APECS_IOC_STAT0_P_NBR_SHIFT 13 -#define APECS_IOC_STAT0_P_NBR_MASK 0x7ffff - -#define APECS_HAE_ADDRESS APECS_IOC_HAXR1 - - -/* - * Data structure for handling APECS machine checks: - */ - -struct el_apecs_mikasa_sysdata_mcheck -{ - unsigned long coma_gcr; - unsigned long coma_edsr; - unsigned long coma_ter; - unsigned long coma_elar; - unsigned long coma_ehar; - unsigned long coma_ldlr; - unsigned long coma_ldhr; - unsigned long coma_base0; - unsigned long coma_base1; - unsigned long coma_base2; - unsigned long coma_base3; - unsigned long coma_cnfg0; - unsigned long coma_cnfg1; - unsigned long coma_cnfg2; - unsigned long coma_cnfg3; - unsigned long epic_dcsr; - unsigned long epic_pear; - unsigned long epic_sear; - unsigned long epic_tbr1; - unsigned long epic_tbr2; - unsigned long epic_pbr1; - unsigned long epic_pbr2; - unsigned long epic_pmr1; - unsigned long epic_pmr2; - unsigned long epic_harx1; - unsigned long epic_harx2; - unsigned long epic_pmlt; - unsigned long epic_tag0; - unsigned long epic_tag1; - unsigned long epic_tag2; - unsigned long epic_tag3; - unsigned long epic_tag4; - unsigned long epic_tag5; - unsigned long epic_tag6; - unsigned long epic_tag7; - unsigned long epic_data0; - unsigned long epic_data1; - unsigned long epic_data2; - unsigned long epic_data3; - unsigned long epic_data4; - unsigned long epic_data5; - unsigned long epic_data6; - unsigned long epic_data7; - - unsigned long pceb_vid; - unsigned long pceb_did; - unsigned long pceb_revision; - unsigned long pceb_command; - unsigned long pceb_status; - unsigned long pceb_latency; - unsigned long pceb_control; - unsigned long pceb_arbcon; - unsigned long pceb_arbpri; - - unsigned long esc_id; - unsigned long esc_revision; - unsigned long esc_int0; - unsigned long esc_int1; - unsigned long esc_elcr0; - unsigned long esc_elcr1; - unsigned long esc_last_eisa; - unsigned long esc_nmi_stat; - - unsigned long pci_ir; - unsigned long pci_imr; - unsigned long svr_mgr; -}; - -/* This for the normal APECS machines. */ -struct el_apecs_sysdata_mcheck -{ - unsigned long coma_gcr; - unsigned long coma_edsr; - unsigned long coma_ter; - unsigned long coma_elar; - unsigned long coma_ehar; - unsigned long coma_ldlr; - unsigned long coma_ldhr; - unsigned long coma_base0; - unsigned long coma_base1; - unsigned long coma_base2; - unsigned long coma_cnfg0; - unsigned long coma_cnfg1; - unsigned long coma_cnfg2; - unsigned long epic_dcsr; - unsigned long epic_pear; - unsigned long epic_sear; - unsigned long epic_tbr1; - unsigned long epic_tbr2; - unsigned long epic_pbr1; - unsigned long epic_pbr2; - unsigned long epic_pmr1; - unsigned long epic_pmr2; - unsigned long epic_harx1; - unsigned long epic_harx2; - unsigned long epic_pmlt; - unsigned long epic_tag0; - unsigned long epic_tag1; - unsigned long epic_tag2; - unsigned long epic_tag3; - unsigned long epic_tag4; - unsigned long epic_tag5; - unsigned long epic_tag6; - unsigned long epic_tag7; - unsigned long epic_data0; - unsigned long epic_data1; - unsigned long epic_data2; - unsigned long epic_data3; - unsigned long epic_data4; - unsigned long epic_data5; - unsigned long epic_data6; - unsigned long epic_data7; -}; - -struct el_apecs_procdata -{ - unsigned long paltemp[32]; /* PAL TEMP REGS. */ - /* EV4-specific fields */ - unsigned long exc_addr; /* Address of excepting instruction. */ - unsigned long exc_sum; /* Summary of arithmetic traps. */ - unsigned long exc_mask; /* Exception mask (from exc_sum). */ - unsigned long iccsr; /* IBox hardware enables. */ - unsigned long pal_base; /* Base address for PALcode. */ - unsigned long hier; /* Hardware Interrupt Enable. */ - unsigned long hirr; /* Hardware Interrupt Request. */ - unsigned long csr; /* D-stream fault info. */ - unsigned long dc_stat; /* D-cache status (ECC/Parity Err). */ - unsigned long dc_addr; /* EV3 Phys Addr for ECC/DPERR. */ - unsigned long abox_ctl; /* ABox Control Register. */ - unsigned long biu_stat; /* BIU Status. */ - unsigned long biu_addr; /* BUI Address. */ - unsigned long biu_ctl; /* BIU Control. */ - unsigned long fill_syndrome;/* For correcting ECC errors. */ - unsigned long fill_addr; /* Cache block which was being read */ - unsigned long va; /* Effective VA of fault or miss. */ - unsigned long bc_tag; /* Backup Cache Tag Probe Results.*/ -}; - - -#ifdef __KERNEL__ - -#ifndef __EXTERN_INLINE -#define __EXTERN_INLINE extern inline -#define __IO_EXTERN_INLINE -#endif - -/* - * I/O functions: - * - * Unlike Jensen, the APECS machines have no concept of local - * I/O---everything goes over the PCI bus. - * - * There is plenty room for optimization here. In particular, - * the Alpha's insb/insw/extb/extw should be useful in moving - * data to/from the right byte-lanes. - */ - -#define vip volatile int __force * -#define vuip volatile unsigned int __force * -#define vulp volatile unsigned long __force * - -#define APECS_SET_HAE \ - do { \ - if (addr >= (1UL << 24)) { \ - unsigned long msb = addr & 0xf8000000; \ - addr -= msb; \ - set_hae(msb); \ - } \ - } while (0) - -__EXTERN_INLINE u8 apecs_ioread8(const void __iomem *xaddr) -{ - unsigned long addr = (unsigned long) xaddr; - unsigned long result, base_and_type; - - if (addr >= APECS_DENSE_MEM) { - addr -= APECS_DENSE_MEM; - APECS_SET_HAE; - base_and_type = APECS_SPARSE_MEM + 0x00; - } else { - addr -= APECS_IO; - base_and_type = APECS_IO + 0x00; - } - - result = *(vip) ((addr << 5) + base_and_type); - return __kernel_extbl(result, addr & 3); -} - -__EXTERN_INLINE void apecs_iowrite8(u8 b, void __iomem *xaddr) -{ - unsigned long addr = (unsigned long) xaddr; - unsigned long w, base_and_type; - - if (addr >= APECS_DENSE_MEM) { - addr -= APECS_DENSE_MEM; - APECS_SET_HAE; - base_and_type = APECS_SPARSE_MEM + 0x00; - } else { - addr -= APECS_IO; - base_and_type = APECS_IO + 0x00; - } - - w = __kernel_insbl(b, addr & 3); - *(vuip) ((addr << 5) + base_and_type) = w; -} - -__EXTERN_INLINE u16 apecs_ioread16(const void __iomem *xaddr) -{ - unsigned long addr = (unsigned long) xaddr; - unsigned long result, base_and_type; - - if (addr >= APECS_DENSE_MEM) { - addr -= APECS_DENSE_MEM; - APECS_SET_HAE; - base_and_type = APECS_SPARSE_MEM + 0x08; - } else { - addr -= APECS_IO; - base_and_type = APECS_IO + 0x08; - } - - result = *(vip) ((addr << 5) + base_and_type); - return __kernel_extwl(result, addr & 3); -} - -__EXTERN_INLINE void apecs_iowrite16(u16 b, void __iomem *xaddr) -{ - unsigned long addr = (unsigned long) xaddr; - unsigned long w, base_and_type; - - if (addr >= APECS_DENSE_MEM) { - addr -= APECS_DENSE_MEM; - APECS_SET_HAE; - base_and_type = APECS_SPARSE_MEM + 0x08; - } else { - addr -= APECS_IO; - base_and_type = APECS_IO + 0x08; - } - - w = __kernel_inswl(b, addr & 3); - *(vuip) ((addr << 5) + base_and_type) = w; -} - -__EXTERN_INLINE u32 apecs_ioread32(const void __iomem *xaddr) -{ - unsigned long addr = (unsigned long) xaddr; - if (addr < APECS_DENSE_MEM) - addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18; - return *(vuip)addr; -} - -__EXTERN_INLINE void apecs_iowrite32(u32 b, void __iomem *xaddr) -{ - unsigned long addr = (unsigned long) xaddr; - if (addr < APECS_DENSE_MEM) - addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18; - *(vuip)addr = b; -} - -__EXTERN_INLINE u64 apecs_ioread64(const void __iomem *xaddr) -{ - unsigned long addr = (unsigned long) xaddr; - if (addr < APECS_DENSE_MEM) - addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18; - return *(vulp)addr; -} - -__EXTERN_INLINE void apecs_iowrite64(u64 b, void __iomem *xaddr) -{ - unsigned long addr = (unsigned long) xaddr; - if (addr < APECS_DENSE_MEM) - addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18; - *(vulp)addr = b; -} - -__EXTERN_INLINE void __iomem *apecs_ioportmap(unsigned long addr) -{ - return (void __iomem *)(addr + APECS_IO); -} - -__EXTERN_INLINE void __iomem *apecs_ioremap(unsigned long addr, - unsigned long size) -{ - return (void __iomem *)(addr + APECS_DENSE_MEM); -} - -__EXTERN_INLINE int apecs_is_ioaddr(unsigned long addr) -{ - return addr >= IDENT_ADDR + 0x180000000UL; -} - -__EXTERN_INLINE int apecs_is_mmio(const volatile void __iomem *addr) -{ - return (unsigned long)addr >= APECS_DENSE_MEM; -} - -#undef APECS_SET_HAE - -#undef vip -#undef vuip -#undef vulp - -#undef __IO_PREFIX -#define __IO_PREFIX apecs -#define apecs_trivial_io_bw 0 -#define apecs_trivial_io_lq 0 -#define apecs_trivial_rw_bw 2 -#define apecs_trivial_rw_lq 1 -#define apecs_trivial_iounmap 1 -#include <asm/io_trivial.h> - -#ifdef __IO_EXTERN_INLINE -#undef __EXTERN_INLINE -#undef __IO_EXTERN_INLINE -#endif - -#endif /* __KERNEL__ */ - -#endif /* __ALPHA_APECS__H__ */ diff --git a/arch/alpha/include/asm/core_lca.h b/arch/alpha/include/asm/core_lca.h deleted file mode 100644 index d8c3e72ef8f6..000000000000 --- a/arch/alpha/include/asm/core_lca.h +++ /dev/null @@ -1,378 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ALPHA_LCA__H__ -#define __ALPHA_LCA__H__ - -#include <asm/compiler.h> -#include <asm/mce.h> - -/* - * Low Cost Alpha (LCA) definitions (these apply to 21066 and 21068, - * for example). - * - * This file is based on: - * - * DECchip 21066 and DECchip 21068 Alpha AXP Microprocessors - * Hardware Reference Manual; Digital Equipment Corp.; May 1994; - * Maynard, MA; Order Number: EC-N2681-71. - */ - -/* - * NOTE: The LCA uses a Host Address Extension (HAE) register to access - * PCI addresses that are beyond the first 27 bits of address - * space. Updating the HAE requires an external cycle (and - * a memory barrier), which tends to be slow. Instead of updating - * it on each sparse memory access, we keep the current HAE value - * cached in variable cache_hae. Only if the cached HAE differs - * from the desired HAE value do we actually updated HAE register. - * The HAE register is preserved by the interrupt handler entry/exit - * code, so this scheme works even in the presence of interrupts. - * - * Dense memory space doesn't require the HAE, but is restricted to - * aligned 32 and 64 bit accesses. Special Cycle and Interrupt - * Acknowledge cycles may also require the use of the HAE. The LCA - * limits I/O address space to the bottom 24 bits of address space, - * but this easily covers the 16 bit ISA I/O address space. - */ - -/* - * NOTE 2! The memory operations do not set any memory barriers, as - * it's not needed for cases like a frame buffer that is essentially - * memory-like. You need to do them by hand if the operations depend - * on ordering. - * - * Similarly, the port I/O operations do a "mb" only after a write - * operation: if an mb is needed before (as in the case of doing - * memory mapped I/O first, and then a port I/O operation to the same - * device), it needs to be done by hand. - * - * After the above has bitten me 100 times, I'll give up and just do - * the mb all the time, but right now I'm hoping this will work out. - * Avoiding mb's may potentially be a noticeable speed improvement, - * but I can't honestly say I've tested it. - * - * Handling interrupts that need to do mb's to synchronize to - * non-interrupts is another fun race area. Don't do it (because if - * you do, I'll have to do *everything* with interrupts disabled, - * ugh). - */ - -/* - * Memory Controller registers: - */ -#define LCA_MEM_BCR0 (IDENT_ADDR + 0x120000000UL) -#define LCA_MEM_BCR1 (IDENT_ADDR + 0x120000008UL) -#define LCA_MEM_BCR2 (IDENT_ADDR + 0x120000010UL) -#define LCA_MEM_BCR3 (IDENT_ADDR + 0x120000018UL) -#define LCA_MEM_BMR0 (IDENT_ADDR + 0x120000020UL) -#define LCA_MEM_BMR1 (IDENT_ADDR + 0x120000028UL) -#define LCA_MEM_BMR2 (IDENT_ADDR + 0x120000030UL) -#define LCA_MEM_BMR3 (IDENT_ADDR + 0x120000038UL) -#define LCA_MEM_BTR0 (IDENT_ADDR + 0x120000040UL) -#define LCA_MEM_BTR1 (IDENT_ADDR + 0x120000048UL) -#define LCA_MEM_BTR2 (IDENT_ADDR + 0x120000050UL) -#define LCA_MEM_BTR3 (IDENT_ADDR + 0x120000058UL) -#define LCA_MEM_GTR (IDENT_ADDR + 0x120000060UL) -#define LCA_MEM_ESR (IDENT_ADDR + 0x120000068UL) -#define LCA_MEM_EAR (IDENT_ADDR + 0x120000070UL) -#define LCA_MEM_CAR (IDENT_ADDR + 0x120000078UL) -#define LCA_MEM_VGR (IDENT_ADDR + 0x120000080UL) -#define LCA_MEM_PLM (IDENT_ADDR + 0x120000088UL) -#define LCA_MEM_FOR (IDENT_ADDR + 0x120000090UL) - -/* - * I/O Controller registers: - */ -#define LCA_IOC_HAE (IDENT_ADDR + 0x180000000UL) -#define LCA_IOC_CONF (IDENT_ADDR + 0x180000020UL) -#define LCA_IOC_STAT0 (IDENT_ADDR + 0x180000040UL) -#define LCA_IOC_STAT1 (IDENT_ADDR + 0x180000060UL) -#define LCA_IOC_TBIA (IDENT_ADDR + 0x180000080UL) -#define LCA_IOC_TB_ENA (IDENT_ADDR + 0x1800000a0UL) -#define LCA_IOC_SFT_RST (IDENT_ADDR + 0x1800000c0UL) -#define LCA_IOC_PAR_DIS (IDENT_ADDR + 0x1800000e0UL) -#define LCA_IOC_W_BASE0 (IDENT_ADDR + 0x180000100UL) -#define LCA_IOC_W_BASE1 (IDENT_ADDR + 0x180000120UL) -#define LCA_IOC_W_MASK0 (IDENT_ADDR + 0x180000140UL) -#define LCA_IOC_W_MASK1 (IDENT_ADDR + 0x180000160UL) -#define LCA_IOC_T_BASE0 (IDENT_ADDR + 0x180000180UL) -#define LCA_IOC_T_BASE1 (IDENT_ADDR + 0x1800001a0UL) -#define LCA_IOC_TB_TAG0 (IDENT_ADDR + 0x188000000UL) -#define LCA_IOC_TB_TAG1 (IDENT_ADDR + 0x188000020UL) -#define LCA_IOC_TB_TAG2 (IDENT_ADDR + 0x188000040UL) -#define LCA_IOC_TB_TAG3 (IDENT_ADDR + 0x188000060UL) -#define LCA_IOC_TB_TAG4 (IDENT_ADDR + 0x188000070UL) -#define LCA_IOC_TB_TAG5 (IDENT_ADDR + 0x1880000a0UL) -#define LCA_IOC_TB_TAG6 (IDENT_ADDR + 0x1880000c0UL) -#define LCA_IOC_TB_TAG7 (IDENT_ADDR + 0x1880000e0UL) - -/* - * Memory spaces: - */ -#define LCA_IACK_SC (IDENT_ADDR + 0x1a0000000UL) -#define LCA_CONF (IDENT_ADDR + 0x1e0000000UL) -#define LCA_IO (IDENT_ADDR + 0x1c0000000UL) -#define LCA_SPARSE_MEM (IDENT_ADDR + 0x200000000UL) -#define LCA_DENSE_MEM (IDENT_ADDR + 0x300000000UL) - -/* - * Bit definitions for I/O Controller status register 0: - */ -#define LCA_IOC_STAT0_CMD 0xf -#define LCA_IOC_STAT0_ERR (1<<4) -#define LCA_IOC_STAT0_LOST (1<<5) -#define LCA_IOC_STAT0_THIT (1<<6) -#define LCA_IOC_STAT0_TREF (1<<7) -#define LCA_IOC_STAT0_CODE_SHIFT 8 -#define LCA_IOC_STAT0_CODE_MASK 0x7 -#define LCA_IOC_STAT0_P_NBR_SHIFT 13 -#define LCA_IOC_STAT0_P_NBR_MASK 0x7ffff - -#define LCA_HAE_ADDRESS LCA_IOC_HAE - -/* LCA PMR Power Management register defines */ -#define LCA_PMR_ADDR (IDENT_ADDR + 0x120000098UL) -#define LCA_PMR_PDIV 0x7 /* Primary clock divisor */ -#define LCA_PMR_ODIV 0x38 /* Override clock divisor */ -#define LCA_PMR_INTO 0x40 /* Interrupt override */ -#define LCA_PMR_DMAO 0x80 /* DMA override */ -#define LCA_PMR_OCCEB 0xffff0000L /* Override cycle counter - even bits */ -#define LCA_PMR_OCCOB 0xffff000000000000L /* Override cycle counter - even bits */ -#define LCA_PMR_PRIMARY_MASK 0xfffffffffffffff8L - -/* LCA PMR Macros */ - -#define LCA_READ_PMR (*(volatile unsigned long *)LCA_PMR_ADDR) -#define LCA_WRITE_PMR(d) (*((volatile unsigned long *)LCA_PMR_ADDR) = (d)) - -#define LCA_GET_PRIMARY(r) ((r) & LCA_PMR_PDIV) -#define LCA_GET_OVERRIDE(r) (((r) >> 3) & LCA_PMR_PDIV) -#define LCA_SET_PRIMARY_CLOCK(r, c) ((r) = (((r) & LCA_PMR_PRIMARY_MASK)|(c))) - -/* LCA PMR Divisor values */ -#define LCA_PMR_DIV_1 0x0 -#define LCA_PMR_DIV_1_5 0x1 -#define LCA_PMR_DIV_2 0x2 -#define LCA_PMR_DIV_4 0x3 -#define LCA_PMR_DIV_8 0x4 -#define LCA_PMR_DIV_16 0x5 -#define LCA_PMR_DIV_MIN DIV_1 -#define LCA_PMR_DIV_MAX DIV_16 - - -/* - * Data structure for handling LCA machine checks. Correctable errors - * result in a short logout frame, uncorrectable ones in a long one. - */ -struct el_lca_mcheck_short { - struct el_common h; /* common logout header */ - unsigned long esr; /* error-status register */ - unsigned long ear; /* error-address register */ - unsigned long dc_stat; /* dcache status register */ - unsigned long ioc_stat0; /* I/O controller status register 0 */ - unsigned long ioc_stat1; /* I/O controller status register 1 */ -}; - -struct el_lca_mcheck_long { - struct el_common h; /* common logout header */ - unsigned long pt[31]; /* PAL temps */ - unsigned long exc_addr; /* exception address */ - unsigned long pad1[3]; - unsigned long pal_base; /* PALcode base address */ - unsigned long hier; /* hw interrupt enable */ - unsigned long hirr; /* hw interrupt request */ - unsigned long mm_csr; /* MMU control & status */ - unsigned long dc_stat; /* data cache status */ - unsigned long dc_addr; /* data cache addr register */ - unsigned long abox_ctl; /* address box control register */ - unsigned long esr; /* error status register */ - unsigned long ear; /* error address register */ - unsigned long car; /* cache control register */ - unsigned long ioc_stat0; /* I/O controller status register 0 */ - unsigned long ioc_stat1; /* I/O controller status register 1 */ - unsigned long va; /* virtual address register */ -}; - -union el_lca { - struct el_common * c; - struct el_lca_mcheck_long * l; - struct el_lca_mcheck_short * s; -}; - -#ifdef __KERNEL__ - -#ifndef __EXTERN_INLINE -#define __EXTERN_INLINE extern inline -#define __IO_EXTERN_INLINE -#endif - -/* - * I/O functions: - * - * Unlike Jensen, the Noname machines have no concept of local - * I/O---everything goes over the PCI bus. - * - * There is plenty room for optimization here. In particular, - * the Alpha's insb/insw/extb/extw should be useful in moving - * data to/from the right byte-lanes. - */ - -#define vip volatile int __force * -#define vuip volatile unsigned int __force * -#define vulp volatile unsigned long __force * - -#define LCA_SET_HAE \ - do { \ - if (addr >= (1UL << 24)) { \ - unsigned long msb = addr & 0xf8000000; \ - addr -= msb; \ - set_hae(msb); \ - } \ - } while (0) - - -__EXTERN_INLINE u8 lca_ioread8(const void __iomem *xaddr) -{ - unsigned long addr = (unsigned long) xaddr; - unsigned long result, base_and_type; - - if (addr >= LCA_DENSE_MEM) { - addr -= LCA_DENSE_MEM; - LCA_SET_HAE; - base_and_type = LCA_SPARSE_MEM + 0x00; - } else { - addr -= LCA_IO; - base_and_type = LCA_IO + 0x00; - } - - result = *(vip) ((addr << 5) + base_and_type); - return __kernel_extbl(result, addr & 3); -} - -__EXTERN_INLINE void lca_iowrite8(u8 b, void __iomem *xaddr) -{ - unsigned long addr = (unsigned long) xaddr; - unsigned long w, base_and_type; - - if (addr >= LCA_DENSE_MEM) { - addr -= LCA_DENSE_MEM; - LCA_SET_HAE; - base_and_type = LCA_SPARSE_MEM + 0x00; - } else { - addr -= LCA_IO; - base_and_type = LCA_IO + 0x00; - } - - w = __kernel_insbl(b, addr & 3); - *(vuip) ((addr << 5) + base_and_type) = w; -} - -__EXTERN_INLINE u16 lca_ioread16(const void __iomem *xaddr) -{ - unsigned long addr = (unsigned long) xaddr; - unsigned long result, base_and_type; - - if (addr >= LCA_DENSE_MEM) { - addr -= LCA_DENSE_MEM; - LCA_SET_HAE; - base_and_type = LCA_SPARSE_MEM + 0x08; - } else { - addr -= LCA_IO; - base_and_type = LCA_IO + 0x08; - } - - result = *(vip) ((addr << 5) + base_and_type); - return __kernel_extwl(result, addr & 3); -} - -__EXTERN_INLINE void lca_iowrite16(u16 b, void __iomem *xaddr) -{ - unsigned long addr = (unsigned long) xaddr; - unsigned long w, base_and_type; - - if (addr >= LCA_DENSE_MEM) { - addr -= LCA_DENSE_MEM; - LCA_SET_HAE; - base_and_type = LCA_SPARSE_MEM + 0x08; - } else { - addr -= LCA_IO; - base_and_type = LCA_IO + 0x08; - } - - w = __kernel_inswl(b, addr & 3); - *(vuip) ((addr << 5) + base_and_type) = w; -} - -__EXTERN_INLINE u32 lca_ioread32(const void __iomem *xaddr) -{ - unsigned long addr = (unsigned long) xaddr; - if (addr < LCA_DENSE_MEM) - addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18; - return *(vuip)addr; -} - -__EXTERN_INLINE void lca_iowrite32(u32 b, void __iomem *xaddr) -{ - unsigned long addr = (unsigned long) xaddr; - if (addr < LCA_DENSE_MEM) - addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18; - *(vuip)addr = b; -} - -__EXTERN_INLINE u64 lca_ioread64(const void __iomem *xaddr) -{ - unsigned long addr = (unsigned long) xaddr; - if (addr < LCA_DENSE_MEM) - addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18; - return *(vulp)addr; -} - -__EXTERN_INLINE void lca_iowrite64(u64 b, void __iomem *xaddr) -{ - unsigned long addr = (unsigned long) xaddr; - if (addr < LCA_DENSE_MEM) - addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18; - *(vulp)addr = b; -} - -__EXTERN_INLINE void __iomem *lca_ioportmap(unsigned long addr) -{ - return (void __iomem *)(addr + LCA_IO); -} - -__EXTERN_INLINE void __iomem *lca_ioremap(unsigned long addr, - unsigned long size) -{ - return (void __iomem *)(addr + LCA_DENSE_MEM); -} - -__EXTERN_INLINE int lca_is_ioaddr(unsigned long addr) -{ - return addr >= IDENT_ADDR + 0x120000000UL; -} - -__EXTERN_INLINE int lca_is_mmio(const volatile void __iomem *addr) -{ - return (unsigned long)addr >= LCA_DENSE_MEM; -} - -#undef vip -#undef vuip -#undef vulp - -#undef __IO_PREFIX -#define __IO_PREFIX lca -#define lca_trivial_rw_bw 2 -#define lca_trivial_rw_lq 1 -#define lca_trivial_io_bw 0 -#define lca_trivial_io_lq 0 -#define lca_trivial_iounmap 1 -#include <asm/io_trivial.h> - -#ifdef __IO_EXTERN_INLINE -#undef __EXTERN_INLINE -#undef __IO_EXTERN_INLINE -#endif - -#endif /* __KERNEL__ */ - -#endif /* __ALPHA_LCA__H__ */ diff --git a/arch/alpha/include/asm/core_t2.h b/arch/alpha/include/asm/core_t2.h index ab956b1625b5..ca9b091d9c5f 100644 --- a/arch/alpha/include/asm/core_t2.h +++ b/arch/alpha/include/asm/core_t2.h @@ -25,16 +25,8 @@ #define T2_MEM_R1_MASK 0x07ffffff /* Mem sparse region 1 mask is 27 bits */ /* GAMMA-SABLE is a SABLE with EV5-based CPUs */ -/* All LYNX machines, EV4 or EV5, use the GAMMA bias also */ #define _GAMMA_BIAS 0x8000000000UL - -#if defined(CONFIG_ALPHA_GENERIC) -#define GAMMA_BIAS alpha_mv.sys.t2.gamma_bias -#elif defined(CONFIG_ALPHA_GAMMA) #define GAMMA_BIAS _GAMMA_BIAS -#else -#define GAMMA_BIAS 0 -#endif /* * Memory spaces: diff --git a/arch/alpha/include/asm/dma-mapping.h b/arch/alpha/include/asm/dma-mapping.h index 6ce7e2041685..ad5a59b035cb 100644 --- a/arch/alpha/include/asm/dma-mapping.h +++ b/arch/alpha/include/asm/dma-mapping.h @@ -6,11 +6,7 @@ extern const struct dma_map_ops alpha_pci_ops; static inline const struct dma_map_ops *get_arch_dma_ops(void) { -#ifdef CONFIG_ALPHA_JENSEN - return NULL; -#else return &alpha_pci_ops; -#endif } #endif /* _ALPHA_DMA_MAPPING_H */ diff --git a/arch/alpha/include/asm/dma.h b/arch/alpha/include/asm/dma.h index a04d76b96089..3a88812b7165 100644 --- a/arch/alpha/include/asm/dma.h +++ b/arch/alpha/include/asm/dma.h @@ -82,11 +82,6 @@ just a wiring limit. */ -/* The maximum address for ISA DMA transfer on Alpha XL, due to an - hardware SIO limitation, is 64MB. -*/ -#define ALPHA_XL_MAX_ISA_DMA_ADDRESS 0x04000000UL - /* The maximum address for ISA DMA transfer on RUFFIAN, due to an hardware SIO limitation, is 16MB. */ @@ -107,9 +102,7 @@ #ifdef CONFIG_ALPHA_GENERIC # define MAX_ISA_DMA_ADDRESS (alpha_mv.max_isa_dma_address) #else -# if defined(CONFIG_ALPHA_XL) -# define MAX_ISA_DMA_ADDRESS ALPHA_XL_MAX_ISA_DMA_ADDRESS -# elif defined(CONFIG_ALPHA_RUFFIAN) +# if defined(CONFIG_ALPHA_RUFFIAN) # define MAX_ISA_DMA_ADDRESS ALPHA_RUFFIAN_MAX_ISA_DMA_ADDRESS # elif defined(CONFIG_ALPHA_SABLE) # define MAX_ISA_DMA_ADDRESS ALPHA_SABLE_MAX_ISA_DMA_ADDRESS diff --git a/arch/alpha/include/asm/elf.h b/arch/alpha/include/asm/elf.h index e6da23f1da83..4d7c46f50382 100644 --- a/arch/alpha/include/asm/elf.h +++ b/arch/alpha/include/asm/elf.h @@ -133,9 +133,7 @@ extern int dump_elf_task(elf_greg_t *dest, struct task_struct *task); #define ELF_PLATFORM \ ({ \ enum implver_enum i_ = implver(); \ - ( i_ == IMPLVER_EV4 ? "ev4" \ - : i_ == IMPLVER_EV5 \ - ? (amask(AMASK_BWX) ? "ev5" : "ev56") \ + ( i_ == IMPLVER_EV5 ? "ev56" \ : amask (AMASK_CIX) ? "ev6" : "ev67"); \ }) diff --git a/arch/alpha/include/asm/io.h b/arch/alpha/include/asm/io.h index 4f47a5003fe8..2bb8cbeedf91 100644 --- a/arch/alpha/include/asm/io.h +++ b/arch/alpha/include/asm/io.h @@ -203,16 +203,10 @@ static inline int generic_is_mmio(const volatile void __iomem *a) #else -#if defined(CONFIG_ALPHA_APECS) -# include <asm/core_apecs.h> -#elif defined(CONFIG_ALPHA_CIA) +#if defined(CONFIG_ALPHA_CIA) # include <asm/core_cia.h> #elif defined(CONFIG_ALPHA_IRONGATE) # include <asm/core_irongate.h> -#elif defined(CONFIG_ALPHA_JENSEN) -# include <asm/jensen.h> -#elif defined(CONFIG_ALPHA_LCA) -# include <asm/core_lca.h> #elif defined(CONFIG_ALPHA_MARVEL) # include <asm/core_marvel.h> #elif defined(CONFIG_ALPHA_MCPCIA) @@ -631,23 +625,7 @@ extern void outsl (unsigned long port, const void *src, unsigned long count); #define outsw outsw #define outsl outsl -/* - * The Alpha Jensen hardware for some rather strange reason puts - * the RTC clock at 0x170 instead of 0x70. Probably due to some - * misguided idea about using 0x70 for NMI stuff. - * - * These defines will override the defaults when doing RTC queries - */ - -#ifdef CONFIG_ALPHA_GENERIC -# define RTC_PORT(x) ((x) + alpha_mv.rtc_port) -#else -# ifdef CONFIG_ALPHA_JENSEN -# define RTC_PORT(x) (0x170+(x)) -# else -# define RTC_PORT(x) (0x70 + (x)) -# endif -#endif +#define RTC_PORT(x) (0x70 + (x)) #define RTC_ALWAYS_BCD 0 /* diff --git a/arch/alpha/include/asm/irq.h b/arch/alpha/include/asm/irq.h index 432402c8e47f..d83b26b6660f 100644 --- a/arch/alpha/include/asm/irq.h +++ b/arch/alpha/include/asm/irq.h @@ -31,16 +31,11 @@ # define NR_IRQS (32768 + 16) /* marvel - 32 pids */ # endif -#elif defined(CONFIG_ALPHA_CABRIOLET) || \ - defined(CONFIG_ALPHA_EB66P) || \ - defined(CONFIG_ALPHA_EB164) || \ - defined(CONFIG_ALPHA_PC164) || \ +#elif defined(CONFIG_ALPHA_PC164) || \ defined(CONFIG_ALPHA_LX164) # define NR_IRQS 35 -#elif defined(CONFIG_ALPHA_EB66) || \ - defined(CONFIG_ALPHA_EB64P) || \ - defined(CONFIG_ALPHA_MIKASA) +#elif defined(CONFIG_ALPHA_MIKASA) # define NR_IRQS 32 #elif defined(CONFIG_ALPHA_ALCOR) || \ @@ -55,7 +50,6 @@ # define NR_IRQS 40 #elif defined(CONFIG_ALPHA_DP264) || \ - defined(CONFIG_ALPHA_LYNX) || \ defined(CONFIG_ALPHA_SHARK) # define NR_IRQS 64 diff --git a/arch/alpha/include/asm/jensen.h b/arch/alpha/include/asm/jensen.h deleted file mode 100644 index 66eb049eb421..000000000000 --- a/arch/alpha/include/asm/jensen.h +++ /dev/null @@ -1,363 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ALPHA_JENSEN_H -#define __ALPHA_JENSEN_H - -#include <asm/compiler.h> - -/* - * Defines for the AlphaPC EISA IO and memory address space. - */ - -/* - * NOTE! The memory operations do not set any memory barriers, as it's - * not needed for cases like a frame buffer that is essentially memory-like. - * You need to do them by hand if the operations depend on ordering. - * - * Similarly, the port IO operations do a "mb" only after a write operation: - * if an mb is needed before (as in the case of doing memory mapped IO - * first, and then a port IO operation to the same device), it needs to be - * done by hand. - * - * After the above has bitten me 100 times, I'll give up and just do the - * mb all the time, but right now I'm hoping this will work out. Avoiding - * mb's may potentially be a noticeable speed improvement, but I can't - * honestly say I've tested it. - * - * Handling interrupts that need to do mb's to synchronize to non-interrupts - * is another fun race area. Don't do it (because if you do, I'll have to - * do *everything* with interrupts disabled, ugh). - */ - -/* - * EISA Interrupt Acknowledge address - */ -#define EISA_INTA (IDENT_ADDR + 0x100000000UL) - -/* - * FEPROM addresses - */ -#define EISA_FEPROM0 (IDENT_ADDR + 0x180000000UL) -#define EISA_FEPROM1 (IDENT_ADDR + 0x1A0000000UL) - -/* - * VL82C106 base address - */ -#define EISA_VL82C106 (IDENT_ADDR + 0x1C0000000UL) - -/* - * EISA "Host Address Extension" address (bits 25-31 of the EISA address) - */ -#define EISA_HAE (IDENT_ADDR + 0x1D0000000UL) - -/* - * "SYSCTL" register address - */ -#define EISA_SYSCTL (IDENT_ADDR + 0x1E0000000UL) - -/* - * "spare" register address - */ -#define EISA_SPARE (IDENT_ADDR + 0x1F0000000UL) - -/* - * EISA memory address offset - */ -#define EISA_MEM (IDENT_ADDR + 0x200000000UL) - -/* - * EISA IO address offset - */ -#define EISA_IO (IDENT_ADDR + 0x300000000UL) - - -#ifdef __KERNEL__ - -#ifndef __EXTERN_INLINE -#define __EXTERN_INLINE extern inline -#define __IO_EXTERN_INLINE -#endif - -/* - * Handle the "host address register". This needs to be set - * to the high 7 bits of the EISA address. This is also needed - * for EISA IO addresses, which are only 16 bits wide (the - * hae needs to be set to 0). - * - * HAE isn't needed for the local IO operations, though. - */ - -#define JENSEN_HAE_ADDRESS EISA_HAE -#define JENSEN_HAE_MASK 0x1ffffff - -__EXTERN_INLINE void jensen_set_hae(unsigned long addr) -{ - /* hae on the Jensen is bits 31:25 shifted right */ - addr >>= 25; - if (addr != alpha_mv.hae_cache) - set_hae(addr); -} - -#define vuip volatile unsigned int * -#define vulp volatile unsigned long * - -/* - * IO functions - * - * The "local" functions are those that don't go out to the EISA bus, - * but instead act on the VL82C106 chip directly.. This is mainly the - * keyboard, RTC, printer and first two serial lines.. - * - * The local stuff makes for some complications, but it seems to be - * gone in the PCI version. I hope I can get DEC suckered^H^H^H^H^H^H^H^H - * convinced that I need one of the newer machines. - */ - -__EXTERN_INLINE unsigned int jensen_local_inb(unsigned long addr) -{ - return 0xff & *(vuip)((addr << 9) + EISA_VL82C106); -} - -__EXTERN_INLINE void jensen_local_outb(u8 b, unsigned long addr) -{ - *(vuip)((addr << 9) + EISA_VL82C106) = b; - mb(); -} - -__EXTERN_INLINE unsigned int jensen_bus_inb(unsigned long addr) -{ - long result; - - jensen_set_hae(0); - result = *(volatile int *)((addr << 7) + EISA_IO + 0x00); - return __kernel_extbl(result, addr & 3); -} - -__EXTERN_INLINE void jensen_bus_outb(u8 b, unsigned long addr) -{ - jensen_set_hae(0); - *(vuip)((addr << 7) + EISA_IO + 0x00) = b * 0x01010101; - mb(); -} - -/* - * It seems gcc is not very good at optimizing away logical - * operations that result in operations across inline functions. - * Which is why this is a macro. - */ - -#define jensen_is_local(addr) ( \ -/* keyboard */ (addr == 0x60 || addr == 0x64) || \ -/* RTC */ (addr == 0x170 || addr == 0x171) || \ -/* mb COM2 */ (addr >= 0x2f8 && addr <= 0x2ff) || \ -/* mb LPT1 */ (addr >= 0x3bc && addr <= 0x3be) || \ -/* mb COM2 */ (addr >= 0x3f8 && addr <= 0x3ff)) - -__EXTERN_INLINE u8 jensen_inb(unsigned long addr) -{ - if (jensen_is_local(addr)) - return jensen_local_inb(addr); - else - return jensen_bus_inb(addr); -} - -__EXTERN_INLINE void jensen_outb(u8 b, unsigned long addr) -{ - if (jensen_is_local(addr)) - jensen_local_outb(b, addr); - else - jensen_bus_outb(b, addr); -} - -__EXTERN_INLINE u16 jensen_inw(unsigned long addr) -{ - long result; - - jensen_set_hae(0); - result = *(volatile int *) ((addr << 7) + EISA_IO + 0x20); - result >>= (addr & 3) * 8; - return 0xffffUL & result; -} - -__EXTERN_INLINE u32 jensen_inl(unsigned long addr) -{ - jensen_set_hae(0); - return *(vuip) ((addr << 7) + EISA_IO + 0x60); -} - -__EXTERN_INLINE u64 jensen_inq(unsigned long addr) -{ - jensen_set_hae(0); - return *(vulp) ((addr << 7) + EISA_IO + 0x60); -} - -__EXTERN_INLINE void jensen_outw(u16 b, unsigned long addr) -{ - jensen_set_hae(0); - *(vuip) ((addr << 7) + EISA_IO + 0x20) = b * 0x00010001; - mb(); -} - -__EXTERN_INLINE void jensen_outl(u32 b, unsigned long addr) -{ - jensen_set_hae(0); - *(vuip) ((addr << 7) + EISA_IO + 0x60) = b; - mb(); -} - -__EXTERN_INLINE void jensen_outq(u64 b, unsigned long addr) -{ - jensen_set_hae(0); - *(vulp) ((addr << 7) + EISA_IO + 0x60) = b; - mb(); -} - -/* - * Memory functions. - */ - -__EXTERN_INLINE u8 jensen_readb(const volatile void __iomem *xaddr) -{ - unsigned long addr = (unsigned long) xaddr; - long result; - - jensen_set_hae(addr); - addr &= JENSEN_HAE_MASK; - result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x00); - result >>= (addr & 3) * 8; - return 0xffUL & result; -} - -__EXTERN_INLINE u16 jensen_readw(const volatile void __iomem *xaddr) -{ - unsigned long addr = (unsigned long) xaddr; - long result; - - jensen_set_hae(addr); - addr &= JENSEN_HAE_MASK; - result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x20); - result >>= (addr & 3) * 8; - return 0xffffUL & result; -} - -__EXTERN_INLINE u32 jensen_readl(const volatile void __iomem *xaddr) -{ - unsigned long addr = (unsigned long) xaddr; - jensen_set_hae(addr); - addr &= JENSEN_HAE_MASK; - return *(vuip) ((addr << 7) + EISA_MEM + 0x60); -} - -__EXTERN_INLINE u64 jensen_readq(const volatile void __iomem *xaddr) -{ - unsigned long addr = (unsigned long) xaddr; - unsigned long r0, r1; - - jensen_set_hae(addr); - addr &= JENSEN_HAE_MASK; - addr = (addr << 7) + EISA_MEM + 0x60; - r0 = *(vuip) (addr); - r1 = *(vuip) (addr + (4 << 7)); - return r1 << 32 | r0; -} - -__EXTERN_INLINE void jensen_writeb(u8 b, volatile void __iomem *xaddr) -{ - unsigned long addr = (unsigned long) xaddr; - jensen_set_hae(addr); - addr &= JENSEN_HAE_MASK; - *(vuip) ((addr << 7) + EISA_MEM + 0x00) = b * 0x01010101; -} - -__EXTERN_INLINE void jensen_writew(u16 b, volatile void __iomem *xaddr) -{ - unsigned long addr = (unsigned long) xaddr; - jensen_set_hae(addr); - addr &= JENSEN_HAE_MASK; - *(vuip) ((addr << 7) + EISA_MEM + 0x20) = b * 0x00010001; -} - -__EXTERN_INLINE void jensen_writel(u32 b, volatile void __iomem *xaddr) -{ - unsigned long addr = (unsigned long) xaddr; - jensen_set_hae(addr); - addr &= JENSEN_HAE_MASK; - *(vuip) ((addr << 7) + EISA_MEM + 0x60) = b; -} - -__EXTERN_INLINE void jensen_writeq(u64 b, volatile void __iomem *xaddr) -{ - unsigned long addr = (unsigned long) xaddr; - jensen_set_hae(addr); - addr &= JENSEN_HAE_MASK; - addr = (addr << 7) + EISA_MEM + 0x60; - *(vuip) (addr) = b; - *(vuip) (addr + (4 << 7)) = b >> 32; -} - -__EXTERN_INLINE void __iomem *jensen_ioportmap(unsigned long addr) -{ - return (void __iomem *)addr; -} - -__EXTERN_INLINE void __iomem *jensen_ioremap(unsigned long addr, - unsigned long size) -{ - return (void __iomem *)(addr + 0x100000000ul); -} - -__EXTERN_INLINE int jensen_is_ioaddr(unsigned long addr) -{ - return (long)addr >= 0; -} - -__EXTERN_INLINE int jensen_is_mmio(const volatile void __iomem *addr) -{ - return (unsigned long)addr >= 0x100000000ul; -} - -/* New-style ioread interface. All the routines are so ugly for Jensen - that it doesn't make sense to merge them. */ - -#define IOPORT(OS, NS) \ -__EXTERN_INLINE u##NS jensen_ioread##NS(const void __iomem *xaddr) \ -{ \ - if (jensen_is_mmio(xaddr)) \ - return jensen_read##OS(xaddr - 0x100000000ul); \ - else \ - return jensen_in##OS((unsigned long)xaddr); \ -} \ -__EXTERN_INLINE void jensen_iowrite##NS(u##NS b, void __iomem *xaddr) \ -{ \ - if (jensen_is_mmio(xaddr)) \ - jensen_write##OS(b, xaddr - 0x100000000ul); \ - else \ - jensen_out##OS(b, (unsigned long)xaddr); \ -} - -IOPORT(b, 8) -IOPORT(w, 16) -IOPORT(l, 32) -IOPORT(q, 64) - -#undef IOPORT - -#undef vuip -#undef vulp - -#undef __IO_PREFIX -#define __IO_PREFIX jensen -#define jensen_trivial_rw_bw 0 -#define jensen_trivial_rw_lq 0 -#define jensen_trivial_io_bw 0 -#define jensen_trivial_io_lq 0 -#define jensen_trivial_iounmap 1 -#include <asm/io_trivial.h> - -#ifdef __IO_EXTERN_INLINE -#undef __EXTERN_INLINE -#undef __IO_EXTERN_INLINE -#endif - -#endif /* __KERNEL__ */ - -#endif /* __ALPHA_JENSEN_H */ diff --git a/arch/alpha/include/asm/machvec.h b/arch/alpha/include/asm/machvec.h index 8623f995d34c..490fc880bb3f 100644 --- a/arch/alpha/include/asm/machvec.h +++ b/arch/alpha/include/asm/machvec.h @@ -72,15 +72,6 @@ struct alpha_machine_vector int (*mv_is_ioaddr)(unsigned long); int (*mv_is_mmio)(const volatile void __iomem *); - void (*mv_switch_mm)(struct mm_struct *, struct mm_struct *, - struct task_struct *); - void (*mv_activate_mm)(struct mm_struct *, struct mm_struct *); - - void (*mv_flush_tlb_current)(struct mm_struct *); - void (*mv_flush_tlb_current_page)(struct mm_struct * mm, - struct vm_area_struct *vma, - unsigned long addr); - void (*update_irq_hw)(unsigned long, unsigned long, int); void (*ack_irq)(unsigned long); void (*device_interrupt)(unsigned long vector); diff --git a/arch/alpha/include/asm/mmu_context.h b/arch/alpha/include/asm/mmu_context.h index 29a3e3a1f02b..eee8fe836a59 100644 --- a/arch/alpha/include/asm/mmu_context.h +++ b/arch/alpha/include/asm/mmu_context.h @@ -71,9 +71,7 @@ __reload_thread(struct pcb_struct *pcb) #ifdef CONFIG_ALPHA_GENERIC # define MAX_ASN (alpha_mv.max_asn) #else -# ifdef CONFIG_ALPHA_EV4 -# define MAX_ASN EV4_MAX_ASN -# elif defined(CONFIG_ALPHA_EV5) +# if defined(CONFIG_ALPHA_EV56) # define MAX_ASN EV5_MAX_ASN # else # define MAX_ASN EV6_MAX_ASN @@ -162,26 +160,6 @@ ev5_switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm, task_thread_info(next)->pcb.asn = mmc & HARDWARE_ASN_MASK; } -__EXTERN_INLINE void -ev4_switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm, - struct task_struct *next) -{ - /* As described, ASN's are broken for TLB usage. But we can - optimize for switching between threads -- if the mm is - unchanged from current we needn't flush. */ - /* ??? May not be needed because EV4 PALcode recognizes that - ASN's are broken and does a tbiap itself on swpctx, under - the "Must set ASN or flush" rule. At least this is true - for a 1992 SRM, reports Joseph Martin (jmartin@hlo.dec.com). - I'm going to leave this here anyway, just to Be Sure. -- r~ */ - if (prev_mm != next_mm) - tbiap(); - - /* Do continue to allocate ASNs, because we can still use them - to avoid flushing the icache. */ - ev5_switch_mm(prev_mm, next_mm, next); -} - extern void __load_new_mm_context(struct mm_struct *); asmlinkage void do_page_fault(unsigned long address, unsigned long mmcsr, long cause, struct pt_regs *regs); @@ -209,25 +187,8 @@ ev5_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm) __load_new_mm_context(next_mm); } -__EXTERN_INLINE void -ev4_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm) -{ - __load_new_mm_context(next_mm); - tbiap(); -} - -#ifdef CONFIG_ALPHA_GENERIC -# define switch_mm(a,b,c) alpha_mv.mv_switch_mm((a),(b),(c)) -# define activate_mm(x,y) alpha_mv.mv_activate_mm((x),(y)) -#else -# ifdef CONFIG_ALPHA_EV4 -# define switch_mm(a,b,c) ev4_switch_mm((a),(b),(c)) -# define activate_mm(x,y) ev4_activate_mm((x),(y)) -# else -# define switch_mm(a,b,c) ev5_switch_mm((a),(b),(c)) -# define activate_mm(x,y) ev5_activate_mm((x),(y)) -# endif -#endif +#define switch_mm(a,b,c) ev5_switch_mm((a),(b),(c)) +#define activate_mm(x,y) ev5_activate_mm((x),(y)) #define init_new_context init_new_context static inline int diff --git a/arch/alpha/include/asm/special_insns.h b/arch/alpha/include/asm/special_insns.h index ca2c5c30b22e..798d0bdb11f9 100644 --- a/arch/alpha/include/asm/special_insns.h +++ b/arch/alpha/include/asm/special_insns.h @@ -15,10 +15,7 @@ enum implver_enum { (enum implver_enum) __implver; }) #else /* Try to eliminate some dead code. */ -#ifdef CONFIG_ALPHA_EV4 -#define implver() IMPLVER_EV4 -#endif -#ifdef CONFIG_ALPHA_EV5 +#ifdef CONFIG_ALPHA_EV56 #define implver() IMPLVER_EV5 #endif #if defined(CONFIG_ALPHA_EV6) diff --git a/arch/alpha/include/asm/tlbflush.h b/arch/alpha/include/asm/tlbflush.h index 94dc37cf873a..ba4b359d6c39 100644 --- a/arch/alpha/include/asm/tlbflush.h +++ b/arch/alpha/include/asm/tlbflush.h @@ -14,16 +14,6 @@ extern void __load_new_mm_context(struct mm_struct *); -/* Use a few helper functions to hide the ugly broken ASN - numbers on early Alphas (ev4 and ev45). */ - -__EXTERN_INLINE void -ev4_flush_tlb_current(struct mm_struct *mm) -{ - __load_new_mm_context(mm); - tbiap(); -} - __EXTERN_INLINE void ev5_flush_tlb_current(struct mm_struct *mm) { @@ -35,19 +25,6 @@ ev5_flush_tlb_current(struct mm_struct *mm) specific icache page. */ __EXTERN_INLINE void -ev4_flush_tlb_current_page(struct mm_struct * mm, - struct vm_area_struct *vma, - unsigned long addr) -{ - int tbi_flag = 2; - if (vma->vm_flags & VM_EXEC) { - __load_new_mm_context(mm); - tbi_flag = 3; - } - tbi(tbi_flag, addr); -} - -__EXTERN_INLINE void ev5_flush_tlb_current_page(struct mm_struct * mm, struct vm_area_struct *vma, unsigned long addr) @@ -59,18 +36,8 @@ ev5_flush_tlb_current_page(struct mm_struct * mm, } -#ifdef CONFIG_ALPHA_GENERIC -# define flush_tlb_current alpha_mv.mv_flush_tlb_current -# define flush_tlb_current_page alpha_mv.mv_flush_tlb_current_page -#else -# ifdef CONFIG_ALPHA_EV4 -# define flush_tlb_current ev4_flush_tlb_current -# define flush_tlb_current_page ev4_flush_tlb_current_page -# else -# define flush_tlb_current ev5_flush_tlb_current -# define flush_tlb_current_page ev5_flush_tlb_current_page -# endif -#endif +#define flush_tlb_current ev5_flush_tlb_current +#define flush_tlb_current_page ev5_flush_tlb_current_page #ifdef __MMU_EXTERN_INLINE #undef __EXTERN_INLINE diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h index c32c2584c0b7..ef295cbb797c 100644 --- a/arch/alpha/include/asm/uaccess.h +++ b/arch/alpha/include/asm/uaccess.h @@ -96,9 +96,6 @@ struct __large_struct { unsigned long buf[100]; }; : "=r"(__gu_val), "=r"(__gu_err) \ : "m"(__m(addr)), "1"(__gu_err)) -#ifdef __alpha_bwx__ -/* Those lucky bastards with ev56 and later CPUs can do byte/word moves. */ - #define __get_user_16(addr) \ __asm__("1: ldwu %0,%2\n" \ "2:\n" \ @@ -112,33 +109,6 @@ struct __large_struct { unsigned long buf[100]; }; EXC(1b,2b,%0,%1) \ : "=r"(__gu_val), "=r"(__gu_err) \ : "m"(__m(addr)), "1"(__gu_err)) -#else -/* Unfortunately, we can't get an unaligned access trap for the sub-word - load, so we have to do a general unaligned operation. */ - -#define __get_user_16(addr) \ -{ \ - long __gu_tmp; \ - __asm__("1: ldq_u %0,0(%3)\n" \ - "2: ldq_u %1,1(%3)\n" \ - " extwl %0,%3,%0\n" \ - " extwh %1,%3,%1\n" \ - " or %0,%1,%0\n" \ - "3:\n" \ - EXC(1b,3b,%0,%2) \ - EXC(2b,3b,%0,%2) \ - : "=&r"(__gu_val), "=&r"(__gu_tmp), "=r"(__gu_err) \ - : "r"(addr), "2"(__gu_err)); \ -} - -#define __get_user_8(addr) \ - __asm__("1: ldq_u %0,0(%2)\n" \ - " extbl %0,%2,%0\n" \ - "2:\n" \ - EXC(1b,2b,%0,%1) \ - : "=&r"(__gu_val), "=r"(__gu_err) \ - : "r"(addr), "1"(__gu_err)) -#endif extern void __put_user_unknown(void); @@ -192,9 +162,6 @@ __asm__ __volatile__("1: stl %r2,%1\n" \ : "=r"(__pu_err) \ : "m"(__m(addr)), "rJ"(x), "0"(__pu_err)) -#ifdef __alpha_bwx__ -/* Those lucky bastards with ev56 and later CPUs can do byte/word moves. */ - #define __put_user_16(x, addr) \ __asm__ __volatile__("1: stw %r2,%1\n" \ "2:\n" \ @@ -208,53 +175,6 @@ __asm__ __volatile__("1: stb %r2,%1\n" \ EXC(1b,2b,$31,%0) \ : "=r"(__pu_err) \ : "m"(__m(addr)), "rJ"(x), "0"(__pu_err)) -#else -/* Unfortunately, we can't get an unaligned access trap for the sub-word - write, so we have to do a general unaligned operation. */ - -#define __put_user_16(x, addr) \ -{ \ - long __pu_tmp1, __pu_tmp2, __pu_tmp3, __pu_tmp4; \ - __asm__ __volatile__( \ - "1: ldq_u %2,1(%5)\n" \ - "2: ldq_u %1,0(%5)\n" \ - " inswh %6,%5,%4\n" \ - " inswl %6,%5,%3\n" \ - " mskwh %2,%5,%2\n" \ - " mskwl %1,%5,%1\n" \ - " or %2,%4,%2\n" \ - " or %1,%3,%1\n" \ - "3: stq_u %2,1(%5)\n" \ - "4: stq_u %1,0(%5)\n" \ - "5:\n" \ - EXC(1b,5b,$31,%0) \ - EXC(2b,5b,$31,%0) \ - EXC(3b,5b,$31,%0) \ - EXC(4b,5b,$31,%0) \ - : "=r"(__pu_err), "=&r"(__pu_tmp1), \ - "=&r"(__pu_tmp2), "=&r"(__pu_tmp3), \ - "=&r"(__pu_tmp4) \ - : "r"(addr), "r"((unsigned long)(x)), "0"(__pu_err)); \ -} - -#define __put_user_8(x, addr) \ -{ \ - long __pu_tmp1, __pu_tmp2; \ - __asm__ __volatile__( \ - "1: ldq_u %1,0(%4)\n" \ - " insbl %3,%4,%2\n" \ - " mskbl %1,%4,%1\n" \ - " or %1,%2,%1\n" \ - "2: stq_u %1,0(%4)\n" \ - "3:\n" \ - EXC(1b,3b,$31,%0) \ - EXC(2b,3b,$31,%0) \ - : "=r"(__pu_err), \ - "=&r"(__pu_tmp1), "=&r"(__pu_tmp2) \ - : "r"((unsigned long)(x)), "r"(addr), "0"(__pu_err)); \ -} -#endif - /* * Complex access routines diff --git a/arch/alpha/include/asm/vga.h b/arch/alpha/include/asm/vga.h index 4c347a8454c7..919931cb5b63 100644 --- a/arch/alpha/include/asm/vga.h +++ b/arch/alpha/include/asm/vga.h @@ -13,6 +13,7 @@ #define VT_BUF_HAVE_RW #define VT_BUF_HAVE_MEMSETW #define VT_BUF_HAVE_MEMCPYW +#define VT_BUF_HAVE_MEMMOVEW static inline void scr_writew(u16 val, volatile u16 *addr) { @@ -40,6 +41,7 @@ static inline void scr_memsetw(u16 *s, u16 c, unsigned int count) /* Do not trust that the usage will be correct; analyze the arguments. */ extern void scr_memcpyw(u16 *d, const u16 *s, unsigned int count); +extern void scr_memmovew(u16 *d, const u16 *s, unsigned int count); /* ??? These are currently only used for downloading character sets. As such, they don't need memory barriers. Is this all they are intended |