diff options
Diffstat (limited to 'arch/arc/Kconfig')
| -rw-r--r-- | arch/arc/Kconfig | 92 |
1 files changed, 34 insertions, 58 deletions
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index d8f51eb8963b..f27e6b90428e 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -6,6 +6,7 @@ config ARC def_bool y select ARC_TIMERS + select ARCH_HAS_CPU_CACHE_ALIASING select ARCH_HAS_CACHE_LINE_SIZE select ARCH_HAS_DEBUG_VM_PGTABLE select ARCH_HAS_DMA_PREP_COHERENT @@ -13,45 +14,46 @@ config ARC select ARCH_HAS_SETUP_DMA_OPS select ARCH_HAS_SYNC_DMA_FOR_CPU select ARCH_HAS_SYNC_DMA_FOR_DEVICE + select ARCH_NEED_CMPXCHG_1_EMU select ARCH_SUPPORTS_ATOMIC_RMW if ARC_HAS_LLSC select ARCH_32BIT_OFF_T select BUILDTIME_TABLE_SORT + select GENERIC_BUILTIN_DTB select CLONE_BACKWARDS select COMMON_CLK select DMA_DIRECT_REMAP select GENERIC_ATOMIC64 if !ISA_ARCV2 || !(ARC_HAS_LL64 && ARC_HAS_LLSC) - select GENERIC_FIND_FIRST_BIT # for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP select GENERIC_IRQ_SHOW select GENERIC_PCI_IOMAP - select GENERIC_PENDING_IRQ if SMP select GENERIC_SCHED_CLOCK select GENERIC_SMP_IDLE_THREAD + select GENERIC_IOREMAP + select GENERIC_STRNCPY_FROM_USER if MMU + select GENERIC_STRNLEN_USER if MMU select HAVE_ARCH_KGDB select HAVE_ARCH_TRACEHOOK select HAVE_ARCH_TRANSPARENT_HUGEPAGE if ARC_MMU_V4 select HAVE_DEBUG_STACKOVERFLOW select HAVE_DEBUG_KMEMLEAK - select HAVE_FUTEX_CMPXCHG if FUTEX select HAVE_IOREMAP_PROT select HAVE_KERNEL_GZIP select HAVE_KERNEL_LZMA select HAVE_KPROBES select HAVE_KRETPROBES + select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_MOD_ARCH_SPECIFIC select HAVE_PERF_EVENTS - select HANDLE_DOMAIN_IRQ + select HAVE_SYSCALL_TRACEPOINTS select IRQ_DOMAIN + select LOCK_MM_AND_FIND_VMA select MODULES_USE_ELF_RELA select OF select OF_EARLY_FLATTREE select PCI_SYSCALL if PCI - select PERF_USE_VMALLOC if ARC_CACHE_VIPT_ALIASING select HAVE_ARCH_JUMP_LABEL if ISA_ARCV2 && !CPU_ENDIAN_BE32 - select SET_FS - -config TRACE_IRQFLAGS_SUPPORT - def_bool y + select TRACE_IRQFLAGS_SUPPORT + select HAVE_EBPF_JIT if ISA_ARCV2 config LOCKDEP_SUPPORT def_bool y @@ -116,16 +118,9 @@ choice default ARC_CPU_770 if ISA_ARCOMPACT default ARC_CPU_HS if ISA_ARCV2 -if ISA_ARCOMPACT - -config ARC_CPU_750D - bool "ARC750D" - select ARC_CANT_LLSC - help - Support for ARC750 core - config ARC_CPU_770 bool "ARC770" + depends on ISA_ARCOMPACT select ARC_HAS_SWAPE help Support for ARC770 core introduced with Rel 4.10 (Summer 2011) @@ -135,8 +130,6 @@ config ARC_CPU_770 -Caches: New Prog Model, Region Flush -Insns: endian swap, load-locked/store-conditional, time-stamp-ctr -endif #ISA_ARCOMPACT - config ARC_CPU_HS bool "ARC-HS" depends on ISA_ARCV2 @@ -241,10 +234,6 @@ config ARC_CACHE_PAGES Note that Global I/D ENABLE + Per Page DISABLE works but corollary Global DISABLE + Per Page ENABLE won't work -config ARC_CACHE_VIPT_ALIASING - bool "Support VIPT Aliasing D$" - depends on ARC_HAS_DCACHE && ISA_ARCOMPACT - endif #ARC_CACHE config ARC_HAS_ICCM @@ -274,33 +263,17 @@ config ARC_DCCM_BASE choice prompt "MMU Version" - default ARC_MMU_V3 if ARC_CPU_770 - default ARC_MMU_V2 if ARC_CPU_750D - default ARC_MMU_V4 if ARC_CPU_HS - -if ISA_ARCOMPACT - -config ARC_MMU_V1 - bool "MMU v1" - help - Orig ARC700 MMU - -config ARC_MMU_V2 - bool "MMU v2" - help - Fixed the deficiency of v1 - possible thrashing in memcpy scenario - when 2 D-TLB and 1 I-TLB entries index into same 2way set. + default ARC_MMU_V3 if ISA_ARCOMPACT + default ARC_MMU_V4 if ISA_ARCV2 config ARC_MMU_V3 bool "MMU v3" - depends on ARC_CPU_770 + depends on ISA_ARCOMPACT help Introduced with ARC700 4.10: New Features Variable Page size (1k-16k), var JTLB size 128 x (2 or 4) Shared Address Spaces (SASID) -endif - config ARC_MMU_V4 bool "MMU v4" depends on ISA_ARCV2 @@ -314,16 +287,17 @@ choice config ARC_PAGE_SIZE_8K bool "8KB" + select HAVE_PAGE_SIZE_8KB help Choose between 8k vs 16k config ARC_PAGE_SIZE_16K + select HAVE_PAGE_SIZE_16KB bool "16KB" - depends on ARC_MMU_V3 || ARC_MMU_V4 config ARC_PAGE_SIZE_4K bool "4KB" - depends on ARC_MMU_V3 || ARC_MMU_V4 + select HAVE_PAGE_SIZE_4KB endchoice @@ -340,6 +314,10 @@ config ARC_HUGEPAGE_16M endchoice +config PGTABLE_LEVELS + int "Number of Page table levels" + default 2 + config ARC_COMPACT_IRQ_LEVELS depends on ISA_ARCOMPACT bool "Setup Timer IRQ as high Priority" @@ -409,7 +387,7 @@ choice help Depending on the configuration, CPU can contain DSP registers (ACC0_GLO, ACC0_GHI, DSP_BFLY0, DSP_CTRL, DSP_FFT_CTRL). - Bellow is options describing how to handle these registers in + Below are options describing how to handle these registers in interrupt entry / exit and in context switch. config ARC_DSP_NONE @@ -496,7 +474,8 @@ config HIGHMEM config ARC_HAS_PAE40 bool "Support for the 40-bit Physical Address Extension" - depends on ISA_ARCV2 + depends on ARC_MMU_V4 + depends on !ARC_PAGE_SIZE_4K select HIGHMEM select PHYS_ADDR_T_64BIT help @@ -515,11 +494,11 @@ config ARC_KVADDR_SIZE kernel-user gutter) config ARC_CURR_IN_REG - bool "Dedicate Register r25 for current_task pointer" + bool "cache current task pointer in gp" default y help - This reserved Register R25 to point to Current Task in - kernel mode. This saves memory access for each such access + This reserves gp register to point to Current Task in + kernel mode eliding memory access for each access config ARC_EMUL_UNALIGNED @@ -563,9 +542,6 @@ config ARC_DW2_UNWIND If you don't debug the kernel, you can say N, but we may not be able to solve problems without frame unwind information -config ARC_DBG_TLB_PARANOIA - bool "Paranoia Checks in Low Level TLB Handlers" - config ARC_DBG_JUMP_LABEL bool "Paranoid checks in Static Keys (jump labels) code" depends on JUMP_LABEL @@ -575,17 +551,17 @@ config ARC_DBG_JUMP_LABEL part of static keys (jump labels) related code. endif -config ARC_BUILTIN_DTB_NAME +config BUILTIN_DTB_NAME string "Built in DTB" + default "nsim_700" help - Set the name of the DTB to embed in the vmlinux binary - Leaving it blank selects the minimal "skeleton" dtb + Set the name of the DTB to embed in the vmlinux binary. endmenu # "ARC Architecture Configuration" -config FORCE_MAX_ZONEORDER +config ARCH_FORCE_MAX_ORDER int "Maximum zone order" - default "12" if ARC_HUGEPAGE_16M - default "11" + default "11" if ARC_HUGEPAGE_16M + default "10" source "kernel/power/Kconfig" |