summaryrefslogtreecommitdiff
path: root/arch/arc/include/asm/entry.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arc/include/asm/entry.h')
-rw-r--r--arch/arc/include/asm/entry.h563
1 files changed, 53 insertions, 510 deletions
diff --git a/arch/arc/include/asm/entry.h b/arch/arc/include/asm/entry.h
index 8943c028d4bb..f453af251a1a 100644
--- a/arch/arc/include/asm/entry.h
+++ b/arch/arc/include/asm/entry.h
@@ -1,219 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Vineetg: March 2009 (Supporting 2 levels of Interrupts)
- * Stack switching code can no longer reliably rely on the fact that
- * if we are NOT in user mode, stack is switched to kernel mode.
- * e.g. L2 IRQ interrupted a L1 ISR which had not yet completed
- * it's prologue including stack switching from user mode
- *
- * Vineetg: Aug 28th 2008: Bug #94984
- * -Zero Overhead Loop Context shd be cleared when entering IRQ/EXcp/Trap
- * Normally CPU does this automatically, however when doing FAKE rtie,
- * we also need to explicitly do this. The problem in macros
- * FAKE_RET_FROM_EXCPN and FAKE_RET_FROM_EXCPN_LOCK_IRQ was that this bit
- * was being "CLEARED" rather then "SET". Actually "SET" clears ZOL context
- *
- * Vineetg: May 5th 2008
- * -Modified CALLEE_REG save/restore macros to handle the fact that
- * r25 contains the kernel current task ptr
- * - Defined Stack Switching Macro to be reused in all intr/excp hdlrs
- * - Shaved off 11 instructions from RESTORE_ALL_INT1 by using the
- * address Write back load ld.ab instead of seperate ld/add instn
- *
- * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
*/
#ifndef __ASM_ARC_ENTRY_H
#define __ASM_ARC_ENTRY_H
-#ifdef __ASSEMBLY__
-#include <asm/unistd.h> /* For NR_syscalls defination */
-#include <asm/asm-offsets.h>
+#include <asm/unistd.h> /* For NR_syscalls definition */
#include <asm/arcregs.h>
#include <asm/ptrace.h>
#include <asm/processor.h> /* For VMALLOC_START */
-#include <asm/thread_info.h> /* For THREAD_SIZE */
+#include <asm/mmu.h>
-/* Note on the LD/ST addr modes with addr reg wback
- *
- * LD.a same as LD.aw
- *
- * LD.a reg1, [reg2, x] => Pre Incr
- * Eff Addr for load = [reg2 + x]
- *
- * LD.ab reg1, [reg2, x] => Post Incr
- * Eff Addr for load = [reg2]
- */
-
-.macro PUSH reg
- st.a \reg, [sp, -4]
-.endm
-
-.macro PUSHAX aux
- lr r9, [\aux]
- PUSH r9
-.endm
-
-.macro POP reg
- ld.ab \reg, [sp, 4]
-.endm
-
-.macro POPAX aux
- POP r9
- sr r9, [\aux]
-.endm
-
-/*--------------------------------------------------------------
- * Helpers to save/restore Scratch Regs:
- * used by Interrupt/Exception Prologue/Epilogue
- *-------------------------------------------------------------*/
-.macro SAVE_R0_TO_R12
- PUSH r0
- PUSH r1
- PUSH r2
- PUSH r3
- PUSH r4
- PUSH r5
- PUSH r6
- PUSH r7
- PUSH r8
- PUSH r9
- PUSH r10
- PUSH r11
- PUSH r12
-.endm
+#ifdef __ASSEMBLER__
-.macro RESTORE_R12_TO_R0
- POP r12
- POP r11
- POP r10
- POP r9
- POP r8
- POP r7
- POP r6
- POP r5
- POP r4
- POP r3
- POP r2
- POP r1
- POP r0
-
-#ifdef CONFIG_ARC_CURR_IN_REG
- ld r25, [sp, 12]
+#ifdef CONFIG_ISA_ARCOMPACT
+#include <asm/entry-compact.h> /* ISA specific bits */
+#else
+#include <asm/entry-arcv2.h>
#endif
-.endm
-
-/*--------------------------------------------------------------
- * Helpers to save/restore callee-saved regs:
- * used by several macros below
- *-------------------------------------------------------------*/
-.macro SAVE_R13_TO_R24
- PUSH r13
- PUSH r14
- PUSH r15
- PUSH r16
- PUSH r17
- PUSH r18
- PUSH r19
- PUSH r20
- PUSH r21
- PUSH r22
- PUSH r23
- PUSH r24
-.endm
-
-.macro RESTORE_R24_TO_R13
- POP r24
- POP r23
- POP r22
- POP r21
- POP r20
- POP r19
- POP r18
- POP r17
- POP r16
- POP r15
- POP r14
- POP r13
-.endm
-#define OFF_USER_R25_FROM_R24 (SZ_CALLEE_REGS + SZ_PT_REGS - 8)/4
-
-/*--------------------------------------------------------------
- * Collect User Mode callee regs as struct callee_regs - needed by
- * fork/do_signal/unaligned-access-emulation.
- * (By default only scratch regs are saved on entry to kernel)
- *
- * Special handling for r25 if used for caching Task Pointer.
- * It would have been saved in task->thread.user_r25 already, but to keep
- * the interface same it is copied into regular r25 placeholder in
- * struct callee_regs.
- *-------------------------------------------------------------*/
+/*
+ * save user mode callee regs as struct callee_regs
+ * - needed by fork/do_signal/unaligned-access-emulation.
+ */
.macro SAVE_CALLEE_SAVED_USER
+ SAVE_ABI_CALLEE_REGS
+.endm
- SAVE_R13_TO_R24
-
-#ifdef CONFIG_ARC_CURR_IN_REG
- ; Retrieve orig r25 and save it on stack
- ld.as r12, [sp, OFF_USER_R25_FROM_R24]
- st.a r12, [sp, -4]
-#else
- PUSH r25
-#endif
-
+/*
+ * restore user mode callee regs as struct callee_regs
+ * - could have been changed by ptrace tracer or unaligned-access fixup
+ */
+.macro RESTORE_CALLEE_SAVED_USER
+ RESTORE_ABI_CALLEE_REGS
.endm
-/*--------------------------------------------------------------
- * Save kernel Mode callee regs at the time of Contect Switch.
- *
- * Special handling for r25 if used for caching Task Pointer.
- * Kernel simply skips saving it since it will be loaded with
- * incoming task pointer anyways
- *-------------------------------------------------------------*/
+/*
+ * save/restore kernel mode callee regs at the time of context switch
+ */
.macro SAVE_CALLEE_SAVED_KERNEL
-
- SAVE_R13_TO_R24
-
-#ifdef CONFIG_ARC_CURR_IN_REG
- sub sp, sp, 4
-#else
- PUSH r25
-#endif
+ SAVE_ABI_CALLEE_REGS
.endm
-/*--------------------------------------------------------------
- * Opposite of SAVE_CALLEE_SAVED_KERNEL
- *-------------------------------------------------------------*/
.macro RESTORE_CALLEE_SAVED_KERNEL
-
-#ifdef CONFIG_ARC_CURR_IN_REG
- add sp, sp, 4 /* skip usual r25 placeholder */
-#else
- POP r25
-#endif
- RESTORE_R24_TO_R13
-.endm
-
-/*--------------------------------------------------------------
- * Opposite of SAVE_CALLEE_SAVED_USER
- *
- * ptrace tracer or unaligned-access fixup might have changed a user mode
- * callee reg which is saved back to usual r25 storage location
- *-------------------------------------------------------------*/
-.macro RESTORE_CALLEE_SAVED_USER
-
-#ifdef CONFIG_ARC_CURR_IN_REG
- ld.ab r12, [sp, 4]
- st.as r12, [sp, OFF_USER_R25_FROM_R24]
-#else
- POP r25
-#endif
- RESTORE_R24_TO_R13
+ RESTORE_ABI_CALLEE_REGS
.endm
/*--------------------------------------------------------------
@@ -224,7 +56,7 @@
.endm
/*-------------------------------------------------------------
- * given a tsk struct, get to the base of it's kernel mode stack
+ * given a tsk struct, get to the base of its kernel mode stack
* tsk->thread_info is really a PAGE, whose bottom hoists stack
* which grows upwards towards thread_info
*------------------------------------------------------------*/
@@ -239,117 +71,6 @@
.endm
-/*--------------------------------------------------------------
- * Switch to Kernel Mode stack if SP points to User Mode stack
- *
- * Entry : r9 contains pre-IRQ/exception/trap status32
- * Exit : SP is set to kernel mode stack pointer
- * If CURR_IN_REG, r25 set to "current" task pointer
- * Clobbers: r9
- *-------------------------------------------------------------*/
-
-.macro SWITCH_TO_KERNEL_STK
-
- /* User Mode when this happened ? Yes: Proceed to switch stack */
- bbit1 r9, STATUS_U_BIT, 88f
-
- /* OK we were already in kernel mode when this event happened, thus can
- * assume SP is kernel mode SP. _NO_ need to do any stack switching
- */
-
-#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
- /* However....
- * If Level 2 Interrupts enabled, we may end up with a corner case:
- * 1. User Task executing
- * 2. L1 IRQ taken, ISR starts (CPU auto-switched to KERNEL mode)
- * 3. But before it could switch SP from USER to KERNEL stack
- * a L2 IRQ "Interrupts" L1
- * Thay way although L2 IRQ happened in Kernel mode, stack is still
- * not switched.
- * To handle this, we may need to switch stack even if in kernel mode
- * provided SP has values in range of USER mode stack ( < 0x7000_0000 )
- */
- brlo sp, VMALLOC_START, 88f
-
- /* TODO: vineetg:
- * We need to be a bit more cautious here. What if a kernel bug in
- * L1 ISR, caused SP to go whaco (some small value which looks like
- * USER stk) and then we take L2 ISR.
- * Above brlo alone would treat it as a valid L1-L2 sceanrio
- * instead of shouting alound
- * The only feasible way is to make sure this L2 happened in
- * L1 prelogue ONLY i.e. ilink2 is less than a pre-set marker in
- * L1 ISR before it switches stack
- */
-
-#endif
-
- /* Save Pre Intr/Exception KERNEL MODE SP on kernel stack
- * safe-keeping not really needed, but it keeps the epilogue code
- * (SP restore) simpler/uniform.
- */
- b.d 66f
- mov r9, sp
-
-88: /*------Intr/Ecxp happened in user mode, "switch" stack ------ */
-
- GET_CURR_TASK_ON_CPU r9
-
- /* With current tsk in r9, get it's kernel mode stack base */
- GET_TSK_STACK_BASE r9, r9
-
-66:
-#ifdef CONFIG_ARC_CURR_IN_REG
- /*
- * Treat r25 as scratch reg, save it on stack first
- * Load it with current task pointer
- */
- st r25, [r9, -4]
- GET_CURR_TASK_ON_CPU r25
-#endif
-
- /* Save Pre Intr/Exception User SP on kernel stack */
- st.a sp, [r9, -16] ; Make room for orig_r0, ECR, user_r25
-
- /* CAUTION:
- * SP should be set at the very end when we are done with everything
- * In case of 2 levels of interrupt we depend on value of SP to assume
- * that everything else is done (loading r25 etc)
- */
-
- /* set SP to point to kernel mode stack */
- mov sp, r9
-
- /* ----- Stack Switched to kernel Mode, Now save REG FILE ----- */
-
-.endm
-
-/*------------------------------------------------------------
- * "FAKE" a rtie to return from CPU Exception context
- * This is to re-enable Exceptions within exception
- * Look at EV_ProtV to see how this is actually used
- *-------------------------------------------------------------*/
-
-.macro FAKE_RET_FROM_EXCPN reg
-
- ld \reg, [sp, PT_status32]
- bic \reg, \reg, (STATUS_U_MASK|STATUS_DE_MASK)
- bset \reg, \reg, STATUS_L_BIT
- sr \reg, [erstatus]
- mov \reg, 55f
- sr \reg, [eret]
-
- rtie
-55:
-.endm
-
-/*
- * @reg [OUT] &thread_info of "current"
- */
-.macro GET_CURR_THR_INFO_FROM_SP reg
- bic \reg, sp, (THREAD_SIZE - 1)
-.endm
-
/*
* @reg [OUT] thread_info->flags of "current"
*/
@@ -358,206 +79,12 @@
ld \reg, [\reg, THREAD_INFO_FLAGS]
.endm
-/*--------------------------------------------------------------
- * For early Exception Prologue, a core reg is temporarily needed to
- * code the rest of prolog (stack switching). This is done by stashing
- * it to memory (non-SMP case) or SCRATCH0 Aux Reg (SMP).
- *
- * Before saving the full regfile - this reg is restored back, only
- * to be saved again on kernel mode stack, as part of ptregs.
- *-------------------------------------------------------------*/
-.macro EXCPN_PROLOG_FREEUP_REG reg
-#ifdef CONFIG_SMP
- sr \reg, [ARC_REG_SCRATCH_DATA0]
-#else
- st \reg, [@ex_saved_reg1]
-#endif
-.endm
-
-.macro EXCPN_PROLOG_RESTORE_REG reg
#ifdef CONFIG_SMP
- lr \reg, [ARC_REG_SCRATCH_DATA0]
-#else
- ld \reg, [@ex_saved_reg1]
-#endif
-.endm
-
-/*--------------------------------------------------------------
- * Save all registers used by Exceptions (TLB Miss, Prot-V, Mem err etc)
- * Requires SP to be already switched to kernel mode Stack
- * sp points to the next free element on the stack at exit of this macro.
- * Registers are pushed / popped in the order defined in struct ptregs
- * in asm/ptrace.h
- * Note that syscalls are implemented via TRAP which is also a exception
- * from CPU's point of view
- *-------------------------------------------------------------*/
-.macro SAVE_ALL_SYS
-
- lr r9, [ecr]
- st r9, [sp, 8] /* ECR */
- st r0, [sp, 4] /* orig_r0, needed only for sys calls */
-
- /* Restore r9 used to code the early prologue */
- EXCPN_PROLOG_RESTORE_REG r9
-
- SAVE_R0_TO_R12
- PUSH gp
- PUSH fp
- PUSH blink
- PUSHAX eret
- PUSHAX erstatus
- PUSH lp_count
- PUSHAX lp_end
- PUSHAX lp_start
- PUSHAX erbta
-.endm
-
-/*--------------------------------------------------------------
- * Restore all registers used by system call or Exceptions
- * SP should always be pointing to the next free stack element
- * when entering this macro.
- *
- * NOTE:
- *
- * It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg
- * for memory load operations. If used in that way interrupts are deffered
- * by hardware and that is not good.
- *-------------------------------------------------------------*/
-.macro RESTORE_ALL_SYS
- POPAX erbta
- POPAX lp_start
- POPAX lp_end
-
- POP r9
- mov lp_count, r9 ;LD to lp_count is not allowed
-
- POPAX erstatus
- POPAX eret
- POP blink
- POP fp
- POP gp
- RESTORE_R12_TO_R0
-
- ld sp, [sp] /* restore original sp */
- /* orig_r0, ECR, user_r25 skipped automatically */
-.endm
-
-/*--------------------------------------------------------------
- * Save all registers used by interrupt handlers.
- *-------------------------------------------------------------*/
-.macro SAVE_ALL_INT1
-
- /* restore original r9 to be saved as part of reg-file */
-#ifdef CONFIG_SMP
- lr r9, [ARC_REG_SCRATCH_DATA0]
-#else
- ld r9, [@int1_saved_reg]
-#endif
-
- /* now we are ready to save the remaining context :) */
- st event_IRQ1, [sp, 8] /* Dummy ECR */
- st 0, [sp, 4] /* orig_r0 , N/A for IRQ */
-
- SAVE_R0_TO_R12
- PUSH gp
- PUSH fp
- PUSH blink
- PUSH ilink1
- PUSHAX status32_l1
- PUSH lp_count
- PUSHAX lp_end
- PUSHAX lp_start
- PUSHAX bta_l1
-.endm
-
-.macro SAVE_ALL_INT2
-
- /* TODO-vineetg: SMP we can't use global nor can we use
- * SCRATCH0 as we do for int1 because while int1 is using
- * it, int2 can come
- */
- /* retsore original r9 , saved in sys_saved_r9 */
- ld r9, [@int2_saved_reg]
-
- /* now we are ready to save the remaining context :) */
- st event_IRQ2, [sp, 8] /* Dummy ECR */
- st 0, [sp, 4] /* orig_r0 , N/A for IRQ */
-
- SAVE_R0_TO_R12
- PUSH gp
- PUSH fp
- PUSH blink
- PUSH ilink2
- PUSHAX status32_l2
- PUSH lp_count
- PUSHAX lp_end
- PUSHAX lp_start
- PUSHAX bta_l2
-.endm
-
-/*--------------------------------------------------------------
- * Restore all registers used by interrupt handlers.
- *
- * NOTE:
- *
- * It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg
- * for memory load operations. If used in that way interrupts are deffered
- * by hardware and that is not good.
- *-------------------------------------------------------------*/
-
-.macro RESTORE_ALL_INT1
- POPAX bta_l1
- POPAX lp_start
- POPAX lp_end
-
- POP r9
- mov lp_count, r9 ;LD to lp_count is not allowed
-
- POPAX status32_l1
- POP ilink1
- POP blink
- POP fp
- POP gp
- RESTORE_R12_TO_R0
-
- ld sp, [sp] /* restore original sp */
- /* orig_r0, ECR, user_r25 skipped automatically */
-.endm
-
-.macro RESTORE_ALL_INT2
- POPAX bta_l2
- POPAX lp_start
- POPAX lp_end
-
- POP r9
- mov lp_count, r9 ;LD to lp_count is not allowed
-
- POPAX status32_l2
- POP ilink2
- POP blink
- POP fp
- POP gp
- RESTORE_R12_TO_R0
-
- ld sp, [sp] /* restore original sp */
- /* orig_r0, ECR, user_r25 skipped automatically */
-.endm
-
-
-/* Get CPU-ID of this core */
-.macro GET_CPU_ID reg
- lr \reg, [identity]
- lsr \reg, \reg, 8
- bmsk \reg, \reg, 7
-.endm
-
-#ifdef CONFIG_SMP
-
-/*-------------------------------------------------
+/*
* Retrieve the current running task on this CPU
- * 1. Determine curr CPU id.
- * 2. Use it to index into _current_task[ ]
+ * - loads it from backing _current_task[] (and can't use the
+ * caching reg for current task
*/
.macro GET_CURR_TASK_ON_CPU reg
GET_CPU_ID \reg
@@ -579,7 +106,7 @@
add2 \tmp, @_current_task, \tmp
st \tsk, [\tmp]
#ifdef CONFIG_ARC_CURR_IN_REG
- mov r25, \tsk
+ mov gp, \tsk
#endif
.endm
@@ -594,21 +121,20 @@
.macro SET_CURR_TASK_ON_CPU tsk, tmp
st \tsk, [@_current_task]
#ifdef CONFIG_ARC_CURR_IN_REG
- mov r25, \tsk
+ mov gp, \tsk
#endif
.endm
#endif /* SMP / UNI */
-/* ------------------------------------------------------------------
+/*
* Get the ptr to some field of Current Task at @off in task struct
- * -Uses r25 for Current task ptr if that is enabled
+ * - Uses current task cached in reg if enabled
*/
-
#ifdef CONFIG_ARC_CURR_IN_REG
.macro GET_CURR_TASK_FIELD_PTR off, reg
- add \reg, r25, \off
+ add \reg, gp, \off
.endm
#else
@@ -620,6 +146,23 @@
#endif /* CONFIG_ARC_CURR_IN_REG */
-#endif /* __ASSEMBLY__ */
+#else /* !__ASSEMBLER__ */
+
+extern void do_signal(struct pt_regs *);
+extern void do_notify_resume(struct pt_regs *);
+extern int do_privilege_fault(unsigned long, struct pt_regs *);
+extern int do_extension_fault(unsigned long, struct pt_regs *);
+extern int insterror_is_error(unsigned long, struct pt_regs *);
+extern int do_memory_error(unsigned long, struct pt_regs *);
+extern int trap_is_brkpt(unsigned long, struct pt_regs *);
+extern int do_misaligned_error(unsigned long, struct pt_regs *);
+extern int do_trap5_error(unsigned long, struct pt_regs *);
+extern int do_misaligned_access(unsigned long, struct pt_regs *, struct callee_regs *);
+extern void do_machine_check_fault(unsigned long, struct pt_regs *);
+extern void do_non_swi_trap(unsigned long, struct pt_regs *);
+extern void do_insterror_or_kprobe(unsigned long, struct pt_regs *);
+extern void do_page_fault(unsigned long, struct pt_regs *);
+
+#endif
#endif /* __ASM_ARC_ENTRY_H */
generated by cgit (git 2.34.1) at 2025-12-25 04:19:44 +0000