diff options
Diffstat (limited to 'arch/arm/Kconfig.debug')
| -rw-r--r-- | arch/arm/Kconfig.debug | 173 |
1 files changed, 34 insertions, 139 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index c345775f035b..366f162e147d 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -17,7 +17,7 @@ config ARM_PTDUMP_DEBUGFS kernel. If in doubt, say "N" -config DEBUG_WX +config ARM_DEBUG_WX bool "Warn on W+X mappings at boot" depends on MMU select ARM_PTDUMP_CORE @@ -90,9 +90,6 @@ config BACKTRACE_VERBOSE In most cases, say N here, unless you are intending to debug the kernel and have access to the kernel binary image. -config FRAME_POINTER - bool - config DEBUG_USER bool "Verbose user fault messages" help @@ -245,6 +242,10 @@ choice depends on ARCH_BCM_5301X || ARCH_BCM_NSP select DEBUG_UART_8250 + config DEBUG_BCMBCA + bool "Kernel low-level debugging on BCMBCA UART0" + depends on ARCH_BCMBCA + config DEBUG_BCM_HR2 bool "Kernel low-level debugging on Hurricane 2 UART2" depends on ARCH_BCM_HR2 @@ -307,14 +308,6 @@ choice Say Y here if you want the debug print routines to direct their output to the second serial port on these devices. - config DEBUG_CNS3XXX - bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx" - depends on ARCH_CNS3XXX - select DEBUG_UART_8250 - help - Say Y here if you want the debug print routines to direct - their output to the CNS3xxx UART0. - config DEBUG_DAVINCI_DA8XX_UART1 bool "Kernel low-level debugging on DaVinci DA8XX using UART1" depends on ARCH_DAVINCI_DA8XX @@ -331,14 +324,6 @@ choice Say Y here if you want the debug print routines to direct their output to UART2 serial port on DaVinci DA8XX devices. - config DEBUG_DAVINCI_DMx_UART0 - bool "Kernel low-level debugging on DaVinci DMx using UART0" - depends on ARCH_DAVINCI_DMx - select DEBUG_UART_8250 - help - Say Y here if you want the debug print routines to direct - their output to UART0 serial port on DaVinci DMx devices. - config DEBUG_DC21285_PORT bool "Kernel low-level debugging messages via footbridge serial port" depends on FOOTBRIDGE @@ -768,30 +753,6 @@ choice depends on ARCH_OMAP2PLUS select DEBUG_UART_8250 - config DEBUG_OMAP7XXUART1 - bool "Kernel low-level debugging via OMAP730 UART1" - depends on ARCH_OMAP730 - select DEBUG_UART_8250 - help - Say Y here if you want kernel low-level debugging support - on OMAP730 based platforms on the UART1. - - config DEBUG_OMAP7XXUART2 - bool "Kernel low-level debugging via OMAP730 UART2" - depends on ARCH_OMAP730 - select DEBUG_UART_8250 - help - Say Y here if you want kernel low-level debugging support - on OMAP730 based platforms on the UART2. - - config DEBUG_OMAP7XXUART3 - bool "Kernel low-level debugging via OMAP730 UART3" - depends on ARCH_OMAP730 - select DEBUG_UART_8250 - help - Say Y here if you want kernel low-level debugging support - on OMAP730 based platforms on the UART3. - config DEBUG_TI81XXUART1 bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)" depends on ARCH_OMAP2PLUS @@ -1046,7 +1007,6 @@ choice config DEBUG_S3C_UART0 depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS select DEBUG_EXYNOS_UART if ARCH_EXYNOS - select DEBUG_S3C24XX_UART if ARCH_S3C24XX select DEBUG_S3C64XX_UART if ARCH_S3C64XX select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 0 for low-level debug" @@ -1058,7 +1018,6 @@ choice config DEBUG_S3C_UART1 depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS select DEBUG_EXYNOS_UART if ARCH_EXYNOS - select DEBUG_S3C24XX_UART if ARCH_S3C24XX select DEBUG_S3C64XX_UART if ARCH_S3C64XX select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 1 for low-level debug" @@ -1070,7 +1029,6 @@ choice config DEBUG_S3C_UART2 depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS select DEBUG_EXYNOS_UART if ARCH_EXYNOS - select DEBUG_S3C24XX_UART if ARCH_S3C24XX select DEBUG_S3C64XX_UART if ARCH_S3C64XX select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 2 for low-level debug" @@ -1090,33 +1048,6 @@ choice their output to UART 3. The port must have been initialised by the boot-loader before use. - config DEBUG_S3C2410_UART0 - depends on ARCH_S3C24XX - select DEBUG_S3C2410_UART - bool "Use S3C2410/S3C2412 UART 0 for low-level debug" - help - Say Y here if you want the debug print routines to direct - their output to UART 0. The port must have been initialised - by the boot-loader before use. - - config DEBUG_S3C2410_UART1 - depends on ARCH_S3C24XX - select DEBUG_S3C2410_UART - bool "Use S3C2410/S3C2412 UART 1 for low-level debug" - help - Say Y here if you want the debug print routines to direct - their output to UART 1. The port must have been initialised - by the boot-loader before use. - - config DEBUG_S3C2410_UART2 - depends on ARCH_S3C24XX - select DEBUG_S3C2410_UART - bool "Use S3C2410/S3C2412 UART 2 for low-level debug" - help - Say Y here if you want the debug print routines to direct - their output to UART 2. The port must have been initialised - by the boot-loader before use. - config DEBUG_SA1100 depends on ARCH_SA1100 bool "Use SA1100 UARTs for low-level debug" @@ -1276,8 +1207,8 @@ choice depends on MACH_STM32MP157 select DEBUG_STM32_UART help - Say Y here if you want kernel low-level debugging support - on STM32MP1 based platforms, wich default UART is wired on + Say Y here if you want kernel low-level debugging support on + STM32MP1-based platforms, where the default UART is wired to UART4, but another UART instance can be selected by modifying CONFIG_DEBUG_UART_PHYS and CONFIG_DEBUG_UART_VIRT. @@ -1479,13 +1410,6 @@ config DEBUG_AT91_UART config DEBUG_EXYNOS_UART bool -config DEBUG_S3C2410_UART - bool - select DEBUG_S3C24XX_UART - -config DEBUG_S3C24XX_UART - bool - config DEBUG_S3C64XX_UART bool @@ -1493,8 +1417,7 @@ config DEBUG_S5PV210_UART bool config DEBUG_S3C_UART - depends on DEBUG_S3C2410_UART || DEBUG_S3C24XX_UART || \ - DEBUG_S3C64XX_UART || DEBUG_S5PV210_UART || \ + depends on DEBUG_S3C64XX_UART || DEBUG_S5PV210_UART || \ DEBUG_EXYNOS_UART int default "0" if DEBUG_S3C_UART0 @@ -1595,7 +1518,7 @@ config DEBUG_LL_INCLUDE default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4 - default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART + default "debug/s3c24xx.S" if DEBUG_S3C64XX_UART default "debug/s5pv210.S" if DEBUG_S5PV210_UART default "debug/sti.S" if DEBUG_STIH41X_ASC2 default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1 @@ -1607,7 +1530,7 @@ config DEBUG_LL_INCLUDE default "debug/vf.S" if DEBUG_VF_UART default "debug/vt8500.S" if DEBUG_VT8500_UART0 default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 - default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART + default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART || DEBUG_BCMBCA default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0 default "debug/brcmstb.S" if DEBUG_BRCMSTB_UART default "mach/debug-macro.S" @@ -1618,11 +1541,10 @@ config DEBUG_UART_PL01X # Compatibility options for 8250 config DEBUG_UART_8250 - def_bool ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC + def_bool ARCH_IXP4XX || ARCH_RPC config DEBUG_UART_PHYS hex "Physical base address of debug UART" - default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0 default 0x01c28000 if DEBUG_SUNXI_UART0 default 0x01c28400 if DEBUG_SUNXI_UART1 default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1 @@ -1672,20 +1594,11 @@ config DEBUG_UART_PHYS default 0x48020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1 default 0x48022000 if DEBUG_TI81XXUART2 default 0x48024000 if DEBUG_TI81XXUART3 - default 0x4806a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \ - DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1 - default 0x4806c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \ - DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2 + default 0x4806a000 if DEBUG_OMAP2UART1 + default 0x4806c000 if DEBUG_OMAP2UART2 default 0x4806e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4 default 0x49020000 if DEBUG_OMAP3UART3 default 0x49042000 if DEBUG_OMAP3UART4 - default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ - DEBUG_S3C2410_UART0) - default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ - DEBUG_S3C2410_UART1) - default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ - DEBUG_S3C2410_UART2) - default 0x78000000 if DEBUG_CNS3XXX default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1 default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0 default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1 @@ -1729,18 +1642,18 @@ config DEBUG_UART_PHYS default 0xfcb00000 if DEBUG_HI3620_UART default 0xfd883000 if DEBUG_ALPINE_UART0 default 0xfe531000 if DEBUG_STIH41X_SBC_ASC1 - default 0xfe800000 if ARCH_IOP32X default 0xfed32000 if DEBUG_STIH41X_ASC2 default 0xff690000 if DEBUG_RK32_UART2 + default 0xff800640 if DEBUG_BCMBCA default 0xffc02000 if DEBUG_SOCFPGA_UART0 default 0xffc02100 if DEBUG_SOCFPGA_ARRIA10_UART1 default 0xffc03000 if DEBUG_SOCFPGA_CYCLONE5_UART1 default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0 default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2 default 0xfff36000 if DEBUG_HIGHBANK_UART - default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1 - default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2 - default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3 + default 0xfffb0000 if DEBUG_OMAP1UART1 + default 0xfffb0800 if DEBUG_OMAP1UART2 + default 0xfffb9800 if DEBUG_OMAP1UART3 default 0xfffe8600 if DEBUG_BCM63XX_UART default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU default 0xfffff200 if DEBUG_AT91_RM9200_DBGU @@ -1754,9 +1667,9 @@ config DEBUG_UART_PHYS DEBUG_RCAR_GEN2_SCIF2 || DEBUG_RCAR_GEN2_SCIF4 || \ DEBUG_RCAR_GEN2_SCIFA2 || \ DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \ - DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \ + DEBUG_RMOBILE_SCIFA4 || \ DEBUG_S3C64XX_UART || \ - DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ + DEBUG_BCM63XX_UART || DEBUG_BCMBCA || DEBUG_ASM9260_UART || \ DEBUG_DIGICOLOR_UA0 || \ DEBUG_AT91_UART || DEBUG_STM32_UART || \ DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \ @@ -1791,15 +1704,9 @@ config DEBUG_UART_VIRT default 0xf6200000 if DEBUG_PXA_UART1 default 0xf7000000 if DEBUG_SUN9I_UART0 default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0 - default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ - DEBUG_S3C2410_UART0) default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1 default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2 default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3 - default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ - DEBUG_S3C2410_UART1) - default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ - DEBUG_S3C2410_UART2) default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1 default 0xf7fc9000 if DEBUG_BERLIN_UART default 0xf8007000 if DEBUG_HIP04_UART @@ -1812,13 +1719,10 @@ config DEBUG_UART_VIRT default 0xfa020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1 default 0xfa022000 if DEBUG_TI81XXUART2 default 0xfa024000 if DEBUG_TI81XXUART3 - default 0xfa06a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \ - DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1 - default 0xfa06c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \ - DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2 + default 0xfa06a000 if DEBUG_OMAP2UART1 + default 0xfa06c000 if DEBUG_OMAP2UART2 default 0xfa06e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4 default 0xfa71e000 if DEBUG_QCOM_UARTDM - default 0xfb002000 if DEBUG_CNS3XXX default 0xfb009000 if DEBUG_REALVIEW_STD_PORT default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3 default 0xfb020000 if DEBUG_OMAP3UART3 @@ -1835,7 +1739,7 @@ config DEBUG_UART_VIRT default 0xfe018000 if DEBUG_MMP_UART3 default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART default 0xfe300000 if DEBUG_BCM_KONA_UART - default 0xfe800000 if ARCH_IOP32X + default 0xfe300640 if DEBUG_BCMBCA default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART default 0xfeb24000 if DEBUG_RK3X_UART0 default 0xfeb26000 if DEBUG_RK3X_UART1 @@ -1846,7 +1750,6 @@ config DEBUG_UART_VIRT default 0xfec03000 if DEBUG_SOCFPGA_CYCLONE5_UART1 default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE - default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0 default 0xfec90000 if DEBUG_RK32_UART2 default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1 default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_SD5203_UART @@ -1859,16 +1762,16 @@ config DEBUG_UART_VIRT default 0xfec00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN default 0xfec00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN default 0xfef36000 if DEBUG_HIGHBANK_UART - default 0xff0b0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1 - default 0xff0b0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2 - default 0xff0b9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3 + default 0xff0b0000 if DEBUG_OMAP1UART1 + default 0xff0b0800 if DEBUG_OMAP1UART2 + default 0xff0b9800 if DEBUG_OMAP1UART3 default 0xffd01000 if DEBUG_HIP01_UART default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ - DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ + DEBUG_QCOM_UARTDM || \ DEBUG_S3C64XX_UART || \ - DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ + DEBUG_BCM63XX_UART || DEBUG_BCMBCA || DEBUG_ASM9260_UART || \ DEBUG_DIGICOLOR_UA0 || \ DEBUG_AT91_UART || DEBUG_STM32_UART || \ DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \ @@ -1877,9 +1780,8 @@ config DEBUG_UART_VIRT config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 - default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \ - DEBUG_BCM_HR2 || DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || \ - DEBUG_OMAP7XXUART3 + default 0 if DEBUG_FOOTBRIDGE_COM1 || DEBUG_BCM_5301X || \ + DEBUG_BCM_HR2 default 3 if DEBUG_MSTARV7_PMUART default 2 @@ -1890,9 +1792,9 @@ config DEBUG_UART_8250_WORD default y if DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \ DEBUG_SOCFPGA_CYCLONE5_UART1 || DEBUG_KEYSTONE_UART0 || \ DEBUG_KEYSTONE_UART1 || DEBUG_ALPINE_UART0 || \ - DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ - DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_BCM_IPROC_UART3 || \ - DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 + DEBUG_DAVINCI_DA8XX_UART1 || DEBUG_DAVINCI_DA8XX_UART2 || \ + DEBUG_BCM_IPROC_UART3 || DEBUG_BCM_KONA_UART || \ + DEBUG_RK32_UART2 config DEBUG_UART_8250_PALMCHIP bool "8250 UART is Palmchip BK-310x" @@ -1910,15 +1812,8 @@ config DEBUG_UNCOMPRESS (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \ !DEBUG_BRCMSTB_UART && !DEBUG_SEMIHOSTING help - This option influences the normal decompressor output for - multiplatform kernels. Normally, multiplatform kernels disable - decompressor output because it is not possible to know where to - send the decompressor output. - - When this option is set, the selected DEBUG_LL output method - will be re-used for normal decompressor output on multiplatform - kernels. - + Say Y here to enable debug output in the decompressor code, using + the selected DEBUG_LL output method. config UNCOMPRESS_INCLUDE string |