diff options
Diffstat (limited to 'arch/arm/Kconfig.debug')
| -rw-r--r-- | arch/arm/Kconfig.debug | 754 |
1 files changed, 408 insertions, 346 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 447629d89884..366f162e147d 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1,13 +1,15 @@ -menu "Kernel hacking" +# SPDX-License-Identifier: GPL-2.0 -source "lib/Kconfig.debug" +config ARM_PTDUMP_CORE + def_bool n -config ARM_PTDUMP +config ARM_PTDUMP_DEBUGFS bool "Export kernel pagetable layout to userspace via debugfs" depends on DEBUG_KERNEL depends on MMU + select ARM_PTDUMP_CORE select DEBUG_FS - ---help--- + help Say Y here if you want to show the kernel pagetable layout in a debugfs file. This information is only useful for kernel developers who are working in architecture specific areas of the kernel. @@ -15,35 +17,78 @@ config ARM_PTDUMP kernel. If in doubt, say "N" -# RMK wants arm kernels compiled with frame pointers or stack unwinding. -# If you know what you are doing and are willing to live without stack -# traces, you can get a slightly smaller kernel by setting this option to -# n, but then RMK will have to kill you ;). -config FRAME_POINTER - bool +config ARM_DEBUG_WX + bool "Warn on W+X mappings at boot" + depends on MMU + select ARM_PTDUMP_CORE + help + Generate a warning if any W+X mappings are found at boot. + + This is useful for discovering cases where the kernel is leaving + W+X mappings after applying NX, as such mappings are a security risk. + + Look for a message in dmesg output like this: + + arm/mm: Checked W+X mappings: passed, no W+X pages found. + + or like this, if the check failed: + + arm/mm: Checked W+X mappings: FAILED, <N> W+X pages found. + + Note that even if the check fails, your kernel is possibly + still fine, as W+X mappings are not a security hole in + themselves, what they do is that they make the exploitation + of other unfixed kernel bugs easier. + + There is no runtime or memory usage effect of this option + once the kernel has booted up - it's a one time check. + + If in doubt, say "Y". + +choice + prompt "Choose kernel unwinder" + default UNWINDER_ARM if AEABI + default UNWINDER_FRAME_POINTER if !AEABI + help + This determines which method will be used for unwinding kernel stack + traces for panics, oopses, bugs, warnings, perf, /proc/<pid>/stack, + livepatch, lockdep, and more. + +config UNWINDER_FRAME_POINTER + bool "Frame pointer unwinder" depends on !THUMB2_KERNEL - default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER + select ARCH_WANT_FRAME_POINTERS + select FRAME_POINTER help - If you say N here, the resulting kernel will be slightly smaller and - faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled, - when a problem occurs with the kernel, the information that is - reported is severely limited. + This option enables the frame pointer unwinder for unwinding + kernel stack traces. -config ARM_UNWIND - bool "Enable stack unwinding support (EXPERIMENTAL)" +config UNWINDER_ARM + bool "ARM EABI stack unwinder" depends on AEABI - default y + select ARM_UNWIND help This option enables stack unwinding support in the kernel using the information automatically generated by the compiler. The resulting kernel image is slightly bigger but the performance is not affected. Currently, this feature - only works with EABI compilers. If unsure say Y. + only works with EABI compilers. + +endchoice -config OLD_MCOUNT +config ARM_UNWIND bool - depends on FUNCTION_TRACER && FRAME_POINTER - default y + +config BACKTRACE_VERBOSE + bool "Verbose backtrace" + depends on EXPERT + help + When the kernel produces a warning or oops, the kernel prints a + trace of the call chain. This option controls whether we include + the numeric addresses or only include the symbolic information. + + In most cases, say N here, unless you are intending to debug the + kernel and have access to the kernel binary image. config DEBUG_USER bool "Verbose user fault messages" @@ -110,14 +155,14 @@ choice 0x80024000 | 0xf0024000 | UART9 config DEBUG_AT91_RM9200_DBGU - bool "Kernel low-level debugging on AT91RM9200, AT91SAM9 DBGU" + bool "Kernel low-level debugging on AT91RM9200, AT91SAM9, SAM9X60 DBGU" select DEBUG_AT91_UART - depends on SOC_AT91RM9200 || SOC_AT91SAM9 + depends on SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 help Say Y here if you want kernel low-level debugging support on the DBGU port of: at91rm9200, at91sam9260, at91sam9g20, at91sam9261, - at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5 + at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5, sam9x60 config DEBUG_AT91_SAM9263_DBGU bool "Kernel low-level debugging on AT91SAM{9263,9G45,A5D3} DBGU" @@ -154,6 +199,34 @@ choice their output to the USART1 port on SAMV7 based machines. + config DEBUG_AT91_SAMA7G5_FLEXCOM3 + bool "Kernel low-level debugging on SAMA7G5 FLEXCOM3" + select DEBUG_AT91_UART + depends on SOC_SAMA7G5 + help + Say Y here if you want kernel low-level debugging support + on the FLEXCOM3 port of SAMA7G5. + + config DEBUG_AT91_LAN966_FLEXCOM + bool "Kernel low-level debugging on LAN966 FLEXCOM USART" + select DEBUG_AT91_UART + depends on SOC_LAN966 + help + Say Y here if you want kernel low-level debugging support + on the FLEXCOM port of LAN966. + + DEBUG_UART_PHYS | DEBUG_UART_VIRT + + 0xe0040200 | 0xfd040200 | FLEXCOM0 + 0xe0044200 | 0xfd044200 | FLEXCOM1 + 0xe0060200 | 0xfd060200 | FLEXCOM2 + 0xe0064200 | 0xfd064200 | FLEXCOM3 + 0xe0070200 | 0xfd070200 | FLEXCOM4 + + By default, enabling FLEXCOM3 port. Based on requirement, use + DEBUG_UART_PHYS and DEBUG_UART_VIRT configurations from above + table. + config DEBUG_BCM2835 bool "Kernel low-level debugging on BCM2835 PL011 UART" depends on ARCH_BCM2835 && ARCH_MULTI_V6 @@ -169,6 +242,23 @@ choice depends on ARCH_BCM_5301X || ARCH_BCM_NSP select DEBUG_UART_8250 + config DEBUG_BCMBCA + bool "Kernel low-level debugging on BCMBCA UART0" + depends on ARCH_BCMBCA + + config DEBUG_BCM_HR2 + bool "Kernel low-level debugging on Hurricane 2 UART2" + depends on ARCH_BCM_HR2 + select DEBUG_UART_8250 + + config DEBUG_BCM_IPROC_UART3 + bool "Kernel low-level debugging on BCM IPROC UART3" + depends on ARCH_BCM_CYGNUS + select DEBUG_UART_8250 + help + Say Y here if you want the debug print routines to direct + their output to the third serial port on these devices. + config DEBUG_BCM_KONA_UART bool "Kernel low-level debugging messages via BCM KONA UART" depends on ARCH_BCM_MOBILE @@ -182,7 +272,7 @@ choice config DEBUG_BCM63XX_UART bool "Kernel low-level debugging on BCM63XX UART" - depends on ARCH_BCM_63XX + depends on ARCH_BCMBCA config DEBUG_BERLIN_UART bool "Marvell Berlin SoC Debug UART" @@ -218,14 +308,6 @@ choice Say Y here if you want the debug print routines to direct their output to the second serial port on these devices. - config DEBUG_CNS3XXX - bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx" - depends on ARCH_CNS3XXX - select DEBUG_UART_8250 - help - Say Y here if you want the debug print routines to direct - their output to the CNS3xxx UART0. - config DEBUG_DAVINCI_DA8XX_UART1 bool "Kernel low-level debugging on DaVinci DA8XX using UART1" depends on ARCH_DAVINCI_DA8XX @@ -242,14 +324,6 @@ choice Say Y here if you want the debug print routines to direct their output to UART2 serial port on DaVinci DA8XX devices. - config DEBUG_DAVINCI_DMx_UART0 - bool "Kernel low-level debugging on DaVinci DMx using UART0" - depends on ARCH_DAVINCI_DMx - select DEBUG_UART_8250 - help - Say Y here if you want the debug print routines to direct - their output to UART0 serial port on DaVinci DMx devices. - config DEBUG_DC21285_PORT bool "Kernel low-level debugging messages via footbridge serial port" depends on FOOTBRIDGE @@ -350,12 +424,12 @@ choice Say Y here if you want kernel low-level debugging support on i.MX25. - config DEBUG_IMX21_IMX27_UART - bool "i.MX21 and i.MX27 Debug UART" - depends on SOC_IMX21 || SOC_IMX27 + config DEBUG_IMX27_UART + bool "i.MX27 Debug UART" + depends on SOC_IMX27 help Say Y here if you want kernel low-level debugging support - on i.MX21 or i.MX27. + on i.MX27. config DEBUG_IMX28_UART bool "i.MX28 Debug UART" @@ -459,13 +533,6 @@ choice Say Y here if you want the debug print routines to direct their output to UART1 serial port on KEYSTONE2 devices. - config DEBUG_KS8695_UART - bool "KS8695 Debug UART" - depends on ARCH_KS8695 - help - Say Y here if you want kernel low-level debugging support - on KS8695. - config DEBUG_LPC18XX_UART0 bool "Kernel low-level debugging via LPC18xx/43xx UART0" depends on ARCH_LPC18XX @@ -564,6 +631,14 @@ choice when u-boot hands over to the kernel, the system silently crashes, with no serial output at all. + config DEBUG_MSTARV7_PMUART + bool "Kernel low-level debugging messages via MSTARV7 PM UART" + depends on ARCH_MSTARV7 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + for MSTAR ARMv7-based platforms on PM UART. + config DEBUG_MT6589_UART0 bool "Mediatek mt6589 UART0" depends on ARCH_MEDIATEK @@ -588,13 +663,6 @@ choice Say Y here if you want kernel low-level debugging support for Mediatek mt8135 based platforms on UART3. - config DEBUG_NETX_UART - bool "Kernel low-level debugging messages via NetX UART" - depends on ARCH_NETX - help - Say Y here if you want kernel low-level debugging support - on Hilscher NetX based platforms. - config DEBUG_NOMADIK_UART bool "Kernel low-level debugging messages via NOMADIK UART" depends on ARCH_NOMADIK @@ -646,7 +714,7 @@ choice config DEBUG_OMAP2UART1 bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)" depends on ARCH_OMAP2PLUS - select DEBUG_OMAP2PLUS_UART + select DEBUG_UART_8250 help This covers at least h4, 2430sdp, 3430sdp, 3630sdp, omap3 torpedo and 3530 lv som. @@ -654,17 +722,17 @@ choice config DEBUG_OMAP2UART2 bool "Kernel low-level debugging messages via OMAP2/3/4 UART2" depends on ARCH_OMAP2PLUS - select DEBUG_OMAP2PLUS_UART + select DEBUG_UART_8250 config DEBUG_OMAP2UART3 bool "Kernel low-level debugging messages via OMAP2 UART3 (n8x0)" depends on ARCH_OMAP2PLUS - select DEBUG_OMAP2PLUS_UART + select DEBUG_UART_8250 config DEBUG_OMAP3UART3 bool "Kernel low-level debugging messages via OMAP3 UART3 (most omap3 boards)" depends on ARCH_OMAP2PLUS - select DEBUG_OMAP2PLUS_UART + select DEBUG_UART_8250 help This covers at least cm_t3x, beagle, crane, devkit8000, igep00x0, ldp, n900, n9(50), pandora, overo, touchbook, @@ -673,75 +741,43 @@ choice config DEBUG_OMAP4UART3 bool "Kernel low-level debugging messages via OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)" depends on ARCH_OMAP2PLUS - select DEBUG_OMAP2PLUS_UART + select DEBUG_UART_8250 config DEBUG_OMAP3UART4 bool "Kernel low-level debugging messages via OMAP36XX UART4" depends on ARCH_OMAP2PLUS - select DEBUG_OMAP2PLUS_UART + select DEBUG_UART_8250 config DEBUG_OMAP4UART4 bool "Kernel low-level debugging messages via OMAP4/5 UART4" depends on ARCH_OMAP2PLUS - select DEBUG_OMAP2PLUS_UART - - config DEBUG_OMAP7XXUART1 - bool "Kernel low-level debugging via OMAP730 UART1" - depends on ARCH_OMAP730 select DEBUG_UART_8250 - help - Say Y here if you want kernel low-level debugging support - on OMAP730 based platforms on the UART1. - - config DEBUG_OMAP7XXUART2 - bool "Kernel low-level debugging via OMAP730 UART2" - depends on ARCH_OMAP730 - select DEBUG_UART_8250 - help - Say Y here if you want kernel low-level debugging support - on OMAP730 based platforms on the UART2. - - config DEBUG_OMAP7XXUART3 - bool "Kernel low-level debugging via OMAP730 UART3" - depends on ARCH_OMAP730 - select DEBUG_UART_8250 - help - Say Y here if you want kernel low-level debugging support - on OMAP730 based platforms on the UART3. config DEBUG_TI81XXUART1 bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)" depends on ARCH_OMAP2PLUS - select DEBUG_OMAP2PLUS_UART + select DEBUG_UART_8250 config DEBUG_TI81XXUART2 bool "Kernel low-level debugging messages via TI81XX UART2" depends on ARCH_OMAP2PLUS - select DEBUG_OMAP2PLUS_UART + select DEBUG_UART_8250 config DEBUG_TI81XXUART3 bool "Kernel low-level debugging messages via TI81XX UART3 (ti8168evm)" depends on ARCH_OMAP2PLUS - select DEBUG_OMAP2PLUS_UART + select DEBUG_UART_8250 config DEBUG_AM33XXUART1 bool "Kernel low-level debugging messages via AM33XX UART1" depends on ARCH_OMAP2PLUS - select DEBUG_OMAP2PLUS_UART + select DEBUG_UART_8250 config DEBUG_ZOOM_UART bool "Kernel low-level debugging messages via Zoom2/3 UART" depends on ARCH_OMAP2PLUS select DEBUG_OMAP2PLUS_UART - config DEBUG_PICOXCELL_UART - depends on ARCH_PICOXCELL - bool "Use PicoXcell UART for low-level debug" - select DEBUG_UART_8250 - help - Say Y here if you want kernel low-level debugging support - on PicoXcell based platforms. - config DEBUG_PXA_UART1 depends on ARCH_PXA bool "Use PXA UART1 for low-level debug" @@ -881,6 +917,20 @@ choice Say Y here if you want kernel low-level debugging support via SCIF2 on Renesas RZ/A1H (R7S72100). + config DEBUG_R7S9210_SCIF2 + bool "Kernel low-level debugging messages via SCIF2 on R7S9210" + depends on ARCH_R7S9210 + help + Say Y here if you want kernel low-level debugging support + via SCIF2 on Renesas RZ/A2M (R7S9210). + + config DEBUG_R7S9210_SCIF4 + bool "Kernel low-level debugging messages via SCIF4 on R7S9210" + depends on ARCH_R7S9210 + help + Say Y here if you want kernel low-level debugging support + via SCIF4 on Renesas RZ/A2M (R7S9210). + config DEBUG_RCAR_GEN1_SCIF0 bool "Kernel low-level debugging messages via SCIF0 on R8A7778" depends on ARCH_R8A7778 @@ -896,12 +946,21 @@ choice via SCIF2 on Renesas R-Car H1 (R8A7779). config DEBUG_RCAR_GEN2_SCIF0 - bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7792/R8A7793" - depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7792 || ARCH_R8A7793 + bool "Kernel low-level debugging messages via SCIF0 on R-Car Gen2 and RZ/G1" + depends on ARCH_R8A7743 || ARCH_R8A7744 || ARCH_R8A7790 || \ + ARCH_R8A7791 || ARCH_R8A7792 || ARCH_R8A7793 help Say Y here if you want kernel low-level debugging support - via SCIF0 on Renesas R-Car H2 (R8A7790), M2-W (R8A7791), V2H - (R8A7792), or M2-N (R8A7793). + via SCIF0 on Renesas RZ/G1M (R8A7743), RZ/G1N (R8A7744), + R-Car H2 (R8A7790), M2-W (R8A7791), V2H (R8A7792), or + M2-N (R8A7793). + + config DEBUG_RCAR_GEN2_SCIF1 + bool "Kernel low-level debugging messages via SCIF1 on R8A77470" + depends on ARCH_R8A77470 + help + Say Y here if you want kernel low-level debugging support + via SCIF1 on Renesas RZ/G1C (R8A77470). config DEBUG_RCAR_GEN2_SCIF2 bool "Kernel low-level debugging messages via SCIF2 on R8A7794" @@ -910,6 +969,20 @@ choice Say Y here if you want kernel low-level debugging support via SCIF2 on Renesas R-Car E2 (R8A7794). + config DEBUG_RCAR_GEN2_SCIF4 + bool "Kernel low-level debugging messages via SCIF4 on R8A7745" + depends on ARCH_R8A7745 + help + Say Y here if you want kernel low-level debugging support + via SCIF4 on Renesas RZ/G1E (R8A7745). + + config DEBUG_RCAR_GEN2_SCIFA2 + bool "Kernel low-level debugging messages via SCIFA2 on R8A7742" + depends on ARCH_R8A7742 + help + Say Y here if you want kernel low-level debugging support + via SCIFA2 on Renesas RZ/G1H (R8A7742). + config DEBUG_RMOBILE_SCIFA0 bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4" depends on ARCH_R8A73A4 @@ -932,9 +1005,8 @@ choice via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0). config DEBUG_S3C_UART0 - depends on PLAT_SAMSUNG + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS select DEBUG_EXYNOS_UART if ARCH_EXYNOS - select DEBUG_S3C24XX_UART if ARCH_S3C24XX select DEBUG_S3C64XX_UART if ARCH_S3C64XX select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 0 for low-level debug" @@ -944,9 +1016,8 @@ choice by the boot-loader before use. config DEBUG_S3C_UART1 - depends on PLAT_SAMSUNG + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS select DEBUG_EXYNOS_UART if ARCH_EXYNOS - select DEBUG_S3C24XX_UART if ARCH_S3C24XX select DEBUG_S3C64XX_UART if ARCH_S3C64XX select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 1 for low-level debug" @@ -956,9 +1027,8 @@ choice by the boot-loader before use. config DEBUG_S3C_UART2 - depends on PLAT_SAMSUNG + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS select DEBUG_EXYNOS_UART if ARCH_EXYNOS - select DEBUG_S3C24XX_UART if ARCH_S3C24XX select DEBUG_S3C64XX_UART if ARCH_S3C64XX select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 2 for low-level debug" @@ -968,7 +1038,7 @@ choice by the boot-loader before use. config DEBUG_S3C_UART3 - depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210) + depends on ARCH_EXYNOS || ARCH_S5PV210 select DEBUG_EXYNOS_UART if ARCH_EXYNOS select DEBUG_S3C64XX_UART if ARCH_S3C64XX select DEBUG_S5PV210_UART if ARCH_S5PV210 @@ -978,33 +1048,6 @@ choice their output to UART 3. The port must have been initialised by the boot-loader before use. - config DEBUG_S3C2410_UART0 - depends on ARCH_S3C24XX - select DEBUG_S3C2410_UART - bool "Use S3C2410/S3C2412 UART 0 for low-level debug" - help - Say Y here if you want the debug print routines to direct - their output to UART 0. The port must have been initialised - by the boot-loader before use. - - config DEBUG_S3C2410_UART1 - depends on ARCH_S3C24XX - select DEBUG_S3C2410_UART - bool "Use S3C2410/S3C2412 UART 1 for low-level debug" - help - Say Y here if you want the debug print routines to direct - their output to UART 1. The port must have been initialised - by the boot-loader before use. - - config DEBUG_S3C2410_UART2 - depends on ARCH_S3C24XX - select DEBUG_S3C2410_UART - bool "Use S3C2410/S3C2412 UART 2 for low-level debug" - help - Say Y here if you want the debug print routines to direct - their output to UART 2. The port must have been initialised - by the boot-loader before use. - config DEBUG_SA1100 depends on ARCH_SA1100 bool "Use SA1100 UARTs for low-level debug" @@ -1013,22 +1056,37 @@ choice on SA-11x0 UART ports. The kernel will check for the first enabled UART in a sequence 3-1-2. + config DEBUG_SD5203_UART + bool "Hisilicon SD5203 Debug UART" + depends on ARCH_SD5203 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on SD5203 UART. + config DEBUG_SOCFPGA_UART0 - depends on ARCH_SOCFPGA + depends on ARCH_INTEL_SOCFPGA bool "Use SOCFPGA UART0 for low-level debug" select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on SOCFPGA(Cyclone 5 and Arria 5) based platforms. - config DEBUG_SOCFPGA_UART1 - depends on ARCH_SOCFPGA - bool "Use SOCFPGA UART1 for low-level debug" + config DEBUG_SOCFPGA_ARRIA10_UART1 + depends on ARCH_INTEL_SOCFPGA + bool "Use SOCFPGA Arria10 UART1 for low-level debug" select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on SOCFPGA(Arria 10) based platforms. + config DEBUG_SOCFPGA_CYCLONE5_UART1 + depends on ARCH_INTEL_SOCFPGA + bool "Use SOCFPGA Cyclone 5 UART1 for low-level debug" + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on SOCFPGA(Cyclone 5 and Arria 5) based platforms. config DEBUG_SUN9I_UART0 bool "Kernel low-level debugging messages via sun9i UART0" @@ -1062,32 +1120,6 @@ choice Say Y here if you want kernel low-level debugging support on Allwinner A31/A23 based platforms on the R_UART. - config DEBUG_SIRFPRIMA2_UART1 - bool "Kernel low-level debugging messages via SiRFprimaII UART1" - depends on ARCH_PRIMA2 - select DEBUG_SIRFSOC_UART - help - Say Y here if you want the debug print routines to direct - their output to the uart1 port on SiRFprimaII devices. - - config DEBUG_SIRFATLAS7_UART0 - bool "Kernel low-level debugging messages via SiRFatlas7 UART0" - depends on ARCH_ATLAS7 - select DEBUG_SIRFSOC_UART - help - Say Y here if you want the debug print routines to direct - their output to the uart0 port on SiRFATLAS7 devices.The uart0 - is used on SiRFATLAS7 as a extra debug port.sometimes an extra - debug port can be very useful. - - config DEBUG_SIRFATLAS7_UART1 - bool "Kernel low-level debugging messages via SiRFatlas7 UART1" - depends on ARCH_ATLAS7 - select DEBUG_SIRFSOC_UART - help - Say Y here if you want the debug print routines to direct - their output to the uart1 port on SiRFATLAS7 devices. - config DEBUG_SPEAR3XX bool "Kernel low-level debugging messages via ST SPEAr 3xx/6xx UART" depends on ARCH_SPEAR3XX || ARCH_SPEAR6XX @@ -1104,10 +1136,9 @@ choice Say Y here if you want kernel low-level debugging support on ST SPEAr13xx based platforms. - config STIH41X_DEBUG_ASC2 + config DEBUG_STIH41X_ASC2 bool "Use StiH415/416 ASC2 UART for low-level debug" depends on ARCH_STI - select DEBUG_STI_UART help Say Y here if you want kernel low-level debugging support on STiH415/416 based platforms like b2000, which has @@ -1115,10 +1146,9 @@ choice If unsure, say N. - config STIH41X_DEBUG_SBC_ASC1 + config DEBUG_STIH41X_SBC_ASC1 bool "Use StiH415/416 SBC ASC1 UART for low-level debug" depends on ARCH_STI - select DEBUG_STI_UART help Say Y here if you want kernel low-level debugging support on STiH415/416 based platforms like b2020. which has @@ -1126,6 +1156,64 @@ choice If unsure, say N. + config DEBUG_STIH418_SBC_ASC0 + bool "Use StiH418 SBC ASC0 UART for low-level debug" + depends on ARCH_STI + help + Say Y here if you want kernel low-level debugging support + on STiH418 based platforms which has default UART wired + up to SBC ASC0. + + If unsure, say N. + + config STM32F4_DEBUG_UART + bool "Use STM32F4 UART for low-level debug" + depends on MACH_STM32F429 || MACH_STM32F469 + select DEBUG_STM32_UART + help + Say Y here if you want kernel low-level debugging support + on STM32F4 based platforms, which default UART is wired on + USART1, but another UART instance can be selected by modifying + CONFIG_DEBUG_UART_PHYS. + + If unsure, say N. + + config STM32F7_DEBUG_UART + bool "Use STM32F7 UART for low-level debug" + depends on MACH_STM32F746 || MACH_STM32F769 + select DEBUG_STM32_UART + help + Say Y here if you want kernel low-level debugging support + on STM32F7 based platforms, which default UART is wired on + USART1, but another UART instance can be selected by modifying + CONFIG_DEBUG_UART_PHYS. + + If unsure, say N. + + config STM32H7_DEBUG_UART + bool "Use STM32H7 UART for low-level debug" + depends on MACH_STM32H743 + select DEBUG_STM32_UART + help + Say Y here if you want kernel low-level debugging support + on STM32H7 based platforms, which default UART is wired on + USART1, but another UART instance can be selected by modifying + CONFIG_DEBUG_UART_PHYS. + + If unsure, say N. + + config STM32MP1_DEBUG_UART + bool "Use STM32MP1 UART for low-level debug" + depends on MACH_STM32MP157 + select DEBUG_STM32_UART + help + Say Y here if you want kernel low-level debugging support on + STM32MP1-based platforms, where the default UART is wired to + UART4, but another UART instance can be selected by modifying + CONFIG_DEBUG_UART_PHYS and CONFIG_DEBUG_UART_VIRT. + + If unsure, say N. + config TEGRA_DEBUG_UART_AUTO_ODMDATA bool "Kernel low-level debugging messages via Tegra UART via ODMDATA" depends on ARCH_TEGRA @@ -1178,14 +1266,6 @@ choice Say Y here if you want kernel low-level debugging support on Tegra based platforms. - config DEBUG_U300_UART - bool "Kernel low-level debugging messages via U300 UART0" - depends on ARCH_U300 - select DEBUG_UART_PL01X - help - Say Y here if you want the debug print routines to direct - their output to the uart port on U300 devices. - config DEBUG_UX500_UART depends on ARCH_U8500 bool "Use Ux500 UART for low-level debug" @@ -1251,18 +1331,6 @@ choice This option selects UART0 on VIA/Wondermedia System-on-a-chip devices, including VT8500, WM8505, WM8650 and WM8850. - config DEBUG_ZTE_ZX - bool "Use ZTE ZX UART" - select DEBUG_UART_PL01X - depends on ARCH_ZX - help - Say Y here if you are enabling ZTE ZX296702 SOC and need - debug uart support. - - This option is preferred over the platform specific - options; the platform specific options are deprecated - and will be soon removed. - config DEBUG_ZYNQ_UART0 bool "Kernel low-level debugging on Xilinx Zynq using UART0" depends on ARCH_ZYNQ @@ -1320,20 +1388,6 @@ choice options; the platform specific options are deprecated and will be soon removed. - config DEBUG_LL_UART_EFM32 - bool "Kernel low-level debugging via efm32 UART" - depends on ARCH_EFM32 - help - Say Y here if you want the debug print routines to direct - their output to an UART or USART port on efm32 based - machines. Use the following addresses for DEBUG_UART_PHYS: - - 0x4000c000 | USART0 - 0x4000c400 | USART1 - 0x4000c800 | USART2 - 0x4000e000 | UART0 - 0x4000e400 | UART1 - config DEBUG_LL_UART_PL01X bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART" help @@ -1356,39 +1410,41 @@ config DEBUG_AT91_UART config DEBUG_EXYNOS_UART bool -config DEBUG_S3C2410_UART - bool - select DEBUG_S3C24XX_UART - -config DEBUG_S3C24XX_UART - bool - config DEBUG_S3C64XX_UART bool config DEBUG_S5PV210_UART bool +config DEBUG_S3C_UART + depends on DEBUG_S3C64XX_UART || DEBUG_S5PV210_UART || \ + DEBUG_EXYNOS_UART + int + default "0" if DEBUG_S3C_UART0 + default "1" if DEBUG_S3C_UART1 + default "2" if DEBUG_S3C_UART2 + default "3" if DEBUG_S3C_UART3 + config DEBUG_OMAP2PLUS_UART bool depends on ARCH_OMAP2PLUS config DEBUG_IMX_UART_PORT - int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \ - DEBUG_IMX25_UART || \ - DEBUG_IMX21_IMX27_UART || \ - DEBUG_IMX31_UART || \ - DEBUG_IMX35_UART || \ - DEBUG_IMX50_UART || \ - DEBUG_IMX51_UART || \ - DEBUG_IMX53_UART || \ - DEBUG_IMX6Q_UART || \ - DEBUG_IMX6SL_UART || \ - DEBUG_IMX6SX_UART || \ - DEBUG_IMX6UL_UART || \ - DEBUG_IMX7D_UART + int "i.MX Debug UART Port Selection" + depends on DEBUG_IMX1_UART || \ + DEBUG_IMX25_UART || \ + DEBUG_IMX27_UART || \ + DEBUG_IMX31_UART || \ + DEBUG_IMX35_UART || \ + DEBUG_IMX50_UART || \ + DEBUG_IMX51_UART || \ + DEBUG_IMX53_UART || \ + DEBUG_IMX6Q_UART || \ + DEBUG_IMX6SL_UART || \ + DEBUG_IMX6SX_UART || \ + DEBUG_IMX6UL_UART || \ + DEBUG_IMX7D_UART default 1 - depends on ARCH_MXC help Choose UART port on which kernel low-level debug messages should be output. @@ -1406,13 +1462,20 @@ config DEBUG_TEGRA_UART bool depends on ARCH_TEGRA -config DEBUG_STI_UART +config DEBUG_STM32_UART bool - depends on ARCH_STI + depends on ARCH_STM32 -config DEBUG_SIRFSOC_UART - bool - depends on ARCH_SIRF +config DEBUG_UART_FLOW_CONTROL + bool "Enable flow control (CTS) for the debug UART" + depends on DEBUG_LL + default y if DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC + help + Some UART ports are connected to terminals that will use modem + control signals to indicate whether they are ready to receive text. + In practice this means that the terminal is asserting the special + control signal CTS (Clear To Send). If your debug UART supports + this and your debug terminal will require it, enable this option. config DEBUG_LL_INCLUDE string @@ -1426,44 +1489,48 @@ config DEBUG_LL_INCLUDE default "debug/meson.S" if DEBUG_MESON_UARTAO default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X default "debug/exynos.S" if DEBUG_EXYNOS_UART - default "debug/efm32.S" if DEBUG_LL_UART_EFM32 default "debug/icedcc.S" if DEBUG_ICEDCC default "debug/imx.S" if DEBUG_IMX1_UART || \ DEBUG_IMX25_UART || \ - DEBUG_IMX21_IMX27_UART || \ + DEBUG_IMX27_UART || \ DEBUG_IMX31_UART || \ DEBUG_IMX35_UART || \ DEBUG_IMX50_UART || \ DEBUG_IMX51_UART || \ - DEBUG_IMX53_UART ||\ + DEBUG_IMX53_UART || \ DEBUG_IMX6Q_UART || \ DEBUG_IMX6SL_UART || \ DEBUG_IMX6SX_UART || \ DEBUG_IMX6UL_UART || \ DEBUG_IMX7D_UART - default "debug/ks8695.S" if DEBUG_KS8695_UART default "debug/msm.S" if DEBUG_QCOM_UARTDM - default "debug/netx.S" if DEBUG_NETX_UART default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2 + default "debug/renesas-scif.S" if DEBUG_R7S9210_SCIF2 + default "debug/renesas-scif.S" if DEBUG_R7S9210_SCIF4 default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0 default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF2 default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF0 + default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF1 default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF2 + default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF4 + default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIFA2 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4 - default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART + default "debug/s3c24xx.S" if DEBUG_S3C64XX_UART default "debug/s5pv210.S" if DEBUG_S5PV210_UART - default "debug/sirf.S" if DEBUG_SIRFSOC_UART - default "debug/sti.S" if DEBUG_STI_UART + default "debug/sti.S" if DEBUG_STIH41X_ASC2 + default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1 + default "debug/sti.S" if DEBUG_STIH418_SBC_ASC0 + default "debug/stm32.S" if DEBUG_STM32_UART default "debug/tegra.S" if DEBUG_TEGRA_UART default "debug/ux500.S" if DEBUG_UX500_UART default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT default "debug/vf.S" if DEBUG_VF_UART default "debug/vt8500.S" if DEBUG_VT8500_UART0 default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 - default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART + default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART || DEBUG_BCMBCA default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0 default "debug/brcmstb.S" if DEBUG_BRCMSTB_UART default "mach/debug-macro.S" @@ -1474,14 +1541,10 @@ config DEBUG_UART_PL01X # Compatibility options for 8250 config DEBUG_UART_8250 - def_bool ARCH_EBSA110 || \ - ARCH_IOP13XX || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || \ - ARCH_RPC + def_bool ARCH_IXP4XX || ARCH_RPC config DEBUG_UART_PHYS hex "Physical base address of debug UART" - default 0x00100a00 if DEBUG_NETX_UART - default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0 default 0x01c28000 if DEBUG_SUNXI_UART0 default 0x01c28400 if DEBUG_SUNXI_UART1 default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1 @@ -1491,7 +1554,7 @@ config DEBUG_UART_PHYS default 0x02531000 if DEBUG_KEYSTONE_UART1 default 0x03010fe0 if ARCH_RPC default 0x07000000 if DEBUG_SUN9I_UART0 - default 0x09405000 if DEBUG_ZTE_ZX + default 0x09530000 if DEBUG_STIH418_SBC_ASC0 default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \ DEBUG_VEXPRESS_UART0_CA9 default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT @@ -1506,30 +1569,36 @@ config DEBUG_UART_PHYS default 0x11006000 if DEBUG_MT6589_UART0 default 0x11009000 if DEBUG_MT8135_UART3 default 0x16000000 if DEBUG_INTEGRATOR + default 0x1600d000 if DEBUG_SD5203_UART default 0x18000300 if DEBUG_BCM_5301X - default 0x18010000 if DEBUG_SIRFATLAS7_UART0 - default 0x18020000 if DEBUG_SIRFATLAS7_UART1 + default 0x18000400 if DEBUG_BCM_HR2 + default 0x18023000 if DEBUG_BCM_IPROC_UART3 default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 + default 0x1f221000 if DEBUG_MSTARV7_PMUART default 0x20001000 if DEBUG_HIP01_UART default 0x20060000 if DEBUG_RK29_UART0 default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 default 0x20201000 if DEBUG_BCM2835 - default 0x3f201000 if DEBUG_BCM2836 default 0x3e000000 if DEBUG_BCM_KONA_UART - default 0x4000e400 if DEBUG_LL_UART_EFM32 + default 0x3f201000 if DEBUG_BCM2836 + default 0x40010000 if STM32MP1_DEBUG_UART + default 0x40011000 if STM32F4_DEBUG_UART || STM32F7_DEBUG_UART || \ + STM32H7_DEBUG_UART default 0x40028000 if DEBUG_AT91_SAMV7_USART1 default 0x40081000 if DEBUG_LPC18XX_UART0 default 0x40090000 if DEBUG_LPC32XX default 0x40100000 if DEBUG_PXA_UART1 default 0x42000000 if DEBUG_GEMINI - default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ - DEBUG_S3C2410_UART0) - default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ - DEBUG_S3C2410_UART1) - default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ - DEBUG_S3C2410_UART2) - default 0x78000000 if DEBUG_CNS3XXX + default 0x44e09000 if DEBUG_AM33XXUART1 + default 0x48020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1 + default 0x48022000 if DEBUG_TI81XXUART2 + default 0x48024000 if DEBUG_TI81XXUART3 + default 0x4806a000 if DEBUG_OMAP2UART1 + default 0x4806c000 if DEBUG_OMAP2UART2 + default 0x4806e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4 + default 0x49020000 if DEBUG_OMAP3UART3 + default 0x49042000 if DEBUG_OMAP3UART4 default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1 default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0 default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1 @@ -1538,12 +1607,9 @@ config DEBUG_UART_PHYS default 0x80010000 if DEBUG_ASM9260_UART default 0x80070000 if DEBUG_IMX23_UART default 0x80074000 if DEBUG_IMX28_UART - default 0x80230000 if DEBUG_PICOXCELL_UART default 0x808c0000 if DEBUG_EP93XX || ARCH_EP93XX default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART - default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1 default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX - default 0xc0013000 if DEBUG_U300_UART default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN default 0xd0000000 if DEBUG_SPEAR3XX @@ -1552,14 +1618,20 @@ config DEBUG_UART_PHYS default 0xd4017000 if DEBUG_MMP_UART2 default 0xd4018000 if DEBUG_MMP_UART3 default 0xe0000000 if DEBUG_SPEAR13XX + default 0xe0064200 if DEBUG_AT91_LAN966_FLEXCOM + default 0xe1824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3 default 0xe4007000 if DEBUG_HIP04_UART default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0 default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1 + default 0xe6c60000 if DEBUG_RCAR_GEN2_SCIFA2 default 0xe6c80000 if DEBUG_RMOBILE_SCIFA4 default 0xe6e58000 if DEBUG_RCAR_GEN2_SCIF2 default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0 - default 0xe8008000 if DEBUG_R7S72100_SCIF2 - default 0xf0000be0 if ARCH_EBSA110 + default 0xe6e68000 if DEBUG_RCAR_GEN2_SCIF1 + default 0xe6ee0000 if DEBUG_RCAR_GEN2_SCIF4 + default 0xe8008000 if DEBUG_R7S72100_SCIF2 || DEBUG_R7S9210_SCIF2 + default 0xe8009000 if DEBUG_R7S9210_SCIF4 + default 0xf0000000 if DEBUG_DIGICOLOR_UA0 default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE default 0xf7fc9000 if DEBUG_BERLIN_UART @@ -1569,51 +1641,58 @@ config DEBUG_UART_PHYS default 0xfc00c000 if DEBUG_AT91_SAMA5D4_USART3 default 0xfcb00000 if DEBUG_HI3620_UART default 0xfd883000 if DEBUG_ALPINE_UART0 - default 0xfe800000 if ARCH_IOP32X + default 0xfe531000 if DEBUG_STIH41X_SBC_ASC1 + default 0xfed32000 if DEBUG_STIH41X_ASC2 default 0xff690000 if DEBUG_RK32_UART2 + default 0xff800640 if DEBUG_BCMBCA default 0xffc02000 if DEBUG_SOCFPGA_UART0 - default 0xffc02100 if DEBUG_SOCFPGA_UART1 - default 0xffd82340 if ARCH_IOP13XX + default 0xffc02100 if DEBUG_SOCFPGA_ARRIA10_UART1 + default 0xffc03000 if DEBUG_SOCFPGA_CYCLONE5_UART1 default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0 default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2 default 0xfff36000 if DEBUG_HIGHBANK_UART - default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1 - default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2 - default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3 + default 0xfffb0000 if DEBUG_OMAP1UART1 + default 0xfffb0800 if DEBUG_OMAP1UART2 + default 0xfffb9800 if DEBUG_OMAP1UART3 default 0xfffe8600 if DEBUG_BCM63XX_UART default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU default 0xfffff200 if DEBUG_AT91_RM9200_DBGU - default 0xfffff700 if ARCH_IOP33X depends on ARCH_EP93XX || \ DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ - DEBUG_LL_UART_EFM32 || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ - DEBUG_NETX_UART || \ DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \ + DEBUG_R7S9210_SCIF2 || DEBUG_R7S9210_SCIF4 || \ DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \ - DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \ + DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF1 || \ + DEBUG_RCAR_GEN2_SCIF2 || DEBUG_RCAR_GEN2_SCIF4 || \ + DEBUG_RCAR_GEN2_SCIFA2 || \ DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \ - DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \ + DEBUG_RMOBILE_SCIFA4 || \ DEBUG_S3C64XX_UART || \ - DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ - DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \ - DEBUG_AT91_UART + DEBUG_BCM63XX_UART || DEBUG_BCMBCA || DEBUG_ASM9260_UART || \ + DEBUG_DIGICOLOR_UA0 || \ + DEBUG_AT91_UART || DEBUG_STM32_UART || \ + DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \ + DEBUG_STIH418_SBC_ASC0 config DEBUG_UART_VIRT hex "Virtual base address of debug UART" default 0xc881f000 if DEBUG_RV1108_UART2 default 0xc8821000 if DEBUG_RV1108_UART1 default 0xc8912000 if DEBUG_RV1108_UART0 - default 0xe0000a00 if DEBUG_NETX_UART default 0xe0010fe0 if ARCH_RPC - default 0xf0000be0 if ARCH_EBSA110 + default 0xe0824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3 default 0xf0010000 if DEBUG_ASM9260_UART + default 0xf0100000 if DEBUG_DIGICOLOR_UA0 default 0xf01fb000 if DEBUG_NOMADIK_UART default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836 + default 0xf0221000 if DEBUG_MSTARV7_PMUART default 0xf1000300 if DEBUG_BCM_5301X + default 0xf1000400 if DEBUG_BCM_HR2 default 0xf1002000 if DEBUG_MT8127_UART0 default 0xf1006000 if DEBUG_MT6589_UART0 default 0xf1009000 if DEBUG_MT8135_UART3 + default 0xf1023000 if DEBUG_BCM_IPROC_UART3 default 0xf11f1000 if DEBUG_VERSATILE default 0xf1600000 if DEBUG_INTEGRATOR default 0xf1c28000 if DEBUG_SUNXI_UART0 @@ -1625,15 +1704,9 @@ config DEBUG_UART_VIRT default 0xf6200000 if DEBUG_PXA_UART1 default 0xf7000000 if DEBUG_SUN9I_UART0 default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0 - default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ - DEBUG_S3C2410_UART0) default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1 default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2 default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3 - default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ - DEBUG_S3C2410_UART1) - default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ - DEBUG_S3C2410_UART2) default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1 default 0xf7fc9000 if DEBUG_BERLIN_UART default 0xf8007000 if DEBUG_HIP04_UART @@ -1641,84 +1714,87 @@ config DEBUG_UART_VIRT default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1 default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU + default 0xf9530000 if DEBUG_STIH418_SBC_ASC0 + default 0xf9e09000 if DEBUG_AM33XXUART1 + default 0xfa020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1 + default 0xfa022000 if DEBUG_TI81XXUART2 + default 0xfa024000 if DEBUG_TI81XXUART3 + default 0xfa06a000 if DEBUG_OMAP2UART1 + default 0xfa06c000 if DEBUG_OMAP2UART2 + default 0xfa06e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4 default 0xfa71e000 if DEBUG_QCOM_UARTDM - default 0xfb002000 if DEBUG_CNS3XXX default 0xfb009000 if DEBUG_REALVIEW_STD_PORT default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3 + default 0xfb020000 if DEBUG_OMAP3UART3 + default 0xfb042000 if DEBUG_OMAP3UART4 default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT - default 0xfc705000 if DEBUG_ZTE_ZX default 0xfcfe8600 if DEBUG_BCM63XX_UART default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX - default 0xfd012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_MV78XX0 + default 0xfd064200 if DEBUG_AT91_LAN966_FLEXCOM + default 0xfd531000 if DEBUG_STIH41X_SBC_ASC1 default 0xfd883000 if DEBUG_ALPINE_UART0 - default 0xfde12000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_DOVE - default 0xfe012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_ORION5X + default 0xfdd32000 if DEBUG_STIH41X_ASC2 + default 0xfe010000 if STM32MP1_DEBUG_UART default 0xfe017000 if DEBUG_MMP_UART2 default 0xfe018000 if DEBUG_MMP_UART3 default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART - default 0xfe230000 if DEBUG_PICOXCELL_UART default 0xfe300000 if DEBUG_BCM_KONA_UART - default 0xfe800000 if ARCH_IOP32X + default 0xfe300640 if DEBUG_BCMBCA default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART default 0xfeb24000 if DEBUG_RK3X_UART0 default 0xfeb26000 if DEBUG_RK3X_UART1 default 0xfeb30c00 if DEBUG_KEYSTONE_UART0 default 0xfeb31000 if DEBUG_KEYSTONE_UART1 default 0xfec02000 if DEBUG_SOCFPGA_UART0 - default 0xfec02100 if DEBUG_SOCFPGA_UART1 - default 0xfec12000 if (DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE) && ARCH_MVEBU + default 0xfec02100 if DEBUG_SOCFPGA_ARRIA10_UART1 + default 0xfec03000 if DEBUG_SOCFPGA_CYCLONE5_UART1 + default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE - default 0xfec10000 if DEBUG_SIRFATLAS7_UART0 - default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0 - default 0xfec20000 if DEBUG_SIRFATLAS7_UART1 - default 0xfec60000 if DEBUG_SIRFPRIMA2_UART1 default 0xfec90000 if DEBUG_RK32_UART2 default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1 - default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 + default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_SD5203_UART default 0xfed60000 if DEBUG_RK29_UART0 default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 default 0xfedc0000 if DEBUG_EP93XX default 0xfee003f8 if DEBUG_FOOTBRIDGE_COM1 default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART - default 0xfee82340 if ARCH_IOP13XX - default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN - default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN + default 0xfec00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN + default 0xfec00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN default 0xfef36000 if DEBUG_HIGHBANK_UART - default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1 - default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2 - default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3 - default 0xfefff700 if ARCH_IOP33X - default 0xff003000 if DEBUG_U300_UART + default 0xff0b0000 if DEBUG_OMAP1UART1 + default 0xff0b0800 if DEBUG_OMAP1UART2 + default 0xff0b9800 if DEBUG_OMAP1UART3 default 0xffd01000 if DEBUG_HIP01_UART default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ - DEBUG_NETX_UART || \ - DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ + DEBUG_QCOM_UARTDM || \ DEBUG_S3C64XX_UART || \ - DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ - DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \ - DEBUG_AT91_UART + DEBUG_BCM63XX_UART || DEBUG_BCMBCA || DEBUG_ASM9260_UART || \ + DEBUG_DIGICOLOR_UA0 || \ + DEBUG_AT91_UART || DEBUG_STM32_UART || \ + DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \ + DEBUG_STIH418_SBC_ASC0 config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 - default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \ - DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || DEBUG_OMAP7XXUART3 + default 0 if DEBUG_FOOTBRIDGE_COM1 || DEBUG_BCM_5301X || \ + DEBUG_BCM_HR2 + default 3 if DEBUG_MSTARV7_PMUART default 2 config DEBUG_UART_8250_WORD bool "Use 32-bit accesses for 8250 UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 depends on DEBUG_UART_8250_SHIFT >= 2 - default y if DEBUG_PICOXCELL_UART || \ - DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_UART1 || \ - DEBUG_KEYSTONE_UART0 || DEBUG_KEYSTONE_UART1 || \ - DEBUG_ALPINE_UART0 || \ - DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ - DEBUG_DAVINCI_DA8XX_UART2 || \ - DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 + default y if DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \ + DEBUG_SOCFPGA_CYCLONE5_UART1 || DEBUG_KEYSTONE_UART0 || \ + DEBUG_KEYSTONE_UART1 || DEBUG_ALPINE_UART0 || \ + DEBUG_DAVINCI_DA8XX_UART1 || DEBUG_DAVINCI_DA8XX_UART2 || \ + DEBUG_BCM_IPROC_UART3 || DEBUG_BCM_KONA_UART || \ + DEBUG_RK32_UART2 config DEBUG_UART_8250_PALMCHIP bool "8250 UART is Palmchip BK-310x" @@ -1728,33 +1804,21 @@ config DEBUG_UART_8250_PALMCHIP except for having a different register layout. Say Y here if the debug UART is of this type. -config DEBUG_UART_8250_FLOW_CONTROL - bool "Enable flow control for 8250 UART" - depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 - default y if ARCH_EBSA110 || DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC - config DEBUG_UNCOMPRESS - bool - depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M - default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ + bool "Enable decompressor debugging via DEBUG_LL output" + depends on !ARCH_MULTIPLATFORM + depends on !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100) + depends on DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \ - !DEBUG_BRCMSTB_UART + !DEBUG_BRCMSTB_UART && !DEBUG_SEMIHOSTING help - This option influences the normal decompressor output for - multiplatform kernels. Normally, multiplatform kernels disable - decompressor output because it is not possible to know where to - send the decompressor output. - - When this option is set, the selected DEBUG_LL output method - will be re-used for normal decompressor output on multiplatform - kernels. - + Say Y here to enable debug output in the decompressor code, using + the selected DEBUG_LL output method. config UNCOMPRESS_INCLUDE string - default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \ - PLAT_SAMSUNG || ARM_SINGLE_ARMV7M - default "mach/uncompress.h" + default "mach/uncompress.h" if ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100 + default "debug/uncompress.h" config EARLY_PRINTK bool "Early printk" @@ -1780,5 +1844,3 @@ config PID_IN_CONTEXTIDR are planning to use hardware trace tools with this kernel. source "drivers/hwtracing/coresight/Kconfig" - -endmenu |