diff options
Diffstat (limited to 'arch/arm/boot/dts/am335x-wega.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/am335x-wega.dtsi | 229 |
1 files changed, 0 insertions, 229 deletions
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi deleted file mode 100644 index 8ce541739b24..000000000000 --- a/arch/arm/boot/dts/am335x-wega.dtsi +++ /dev/null @@ -1,229 +0,0 @@ -/* - * Copyright (C) 2015 Phytec Messtechnik GmbH - * Author: Teresa Remmet <t.remmet@phytec.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/ { - model = "Phytec AM335x phyBOARD-WEGA"; - compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"; - - sound: sound_iface { - compatible = "ti,da830-evm-audio"; - }; - - regulators { - compatible = "simple-bus"; - - vcc3v3: fixedregulator1 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - }; -}; - -/* Audio */ -&am33xx_pinmux { - mcasp0_pins: pinmux_mcasp0 { - pinctrl-single,pins = < - AM33XX_IOPAD(0x9AC, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahclkx.mcasp0_ahclkx */ - AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ - AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ - AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */ - AM33XX_IOPAD(0x9A8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */ - >; - }; -}; - -&i2c0 { - tlv320aic3007: tlv320aic3007@18 { - compatible = "ti,tlv320aic3007"; - reg = <0x18>; - AVDD-supply = <&vcc3v3>; - IOVDD-supply = <&vcc3v3>; - DRVDD-supply = <&vcc3v3>; - DVDD-supply = <&vdig1_reg>; - status = "okay"; - }; -}; - -&mcasp0 { - pinctrl-names = "default"; - pinctrl-0 = <&mcasp0_pins>; - op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */ - tdm-slots = <2>; - serial-dir = < - 2 1 0 0 /* # 0: INACTIVE, 1: TX, 2: RX */ - >; - tx-num-evt = <16>; - rt-num-evt = <16>; - status = "okay"; -}; - -&sound { - ti,model = "AM335x-Wega"; - ti,audio-codec = <&tlv320aic3007>; - ti,mcasp-controller = <&mcasp0>; - ti,audio-routing = - "Line Out", "LLOUT", - "Line Out", "RLOUT", - "LINE1L", "Line In", - "LINE1R", "Line In"; - clocks = <&mcasp0_fck>; - clock-names = "mclk"; - status = "okay"; -}; - -/* CAN Busses */ -&am33xx_pinmux { - dcan1_pins: pinmux_dcan1 { - pinctrl-single,pins = < - AM33XX_IOPAD(0x968, PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart0_ctsn.d_can1_tx */ - AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart0_rtsn.d_can1_rx */ - >; - }; -}; - -&dcan1 { - pinctrl-names = "default"; - pinctrl-0 = <&dcan1_pins>; - status = "okay"; -}; - -/* Ethernet */ -&am33xx_pinmux { - ethernet1_pins: pinmux_ethernet1 { - pinctrl-single,pins = < - AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE1) /* gpmc_a0.mii2_txen */ - AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a1.mii2_rxdv */ - AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE1) /* gpmc_a2.mii2_txd3 */ - AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE1) /* gpmc_a3.mii2_txd2 */ - AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE1) /* gpmc_a4.mii2_txd1 */ - AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE1) /* gpmc_a5.mii2_txd0 */ - AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a6.mii2_txclk */ - AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a7.mii2_rxclk */ - AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a8.mii2_rxd3 */ - AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a9.mii2_rxd2 */ - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a10.mii2_rxd1 */ - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a11.mii2_rxd0 */ - AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_wpn.mii2_rxerr */ - AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_ben1.mii2_col */ - >; - }; -}; - -&cpsw_emac1 { - phy-handle = <&phy1>; - phy-mode = "mii"; - dual_emac_res_vlan = <2>; -}; - -&davinci_mdio { - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&mac { - slaves = <2>; - pinctrl-names = "default"; - pinctrl-0 = <ðernet0_pins ðernet1_pins>; - dual_emac = <1>; -}; - -/* MMC */ -&am33xx_pinmux { - mmc1_pins: pinmux_mmc1 { - pinctrl-single,pins = < - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE7) /* spi0_cs1.mmc0_sdcd */ - >; - }; -}; - -&mmc1 { - vmmc-supply = <&vcc3v3>; - bus-width = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -/* Power */ -&vdig1_reg { - regulator-boot-on; - regulator-always-on; -}; - -/* UARTs */ -&am33xx_pinmux { - uart0_pins: pinmux_uart0 { - pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ - >; - }; - - uart1_pins: pinmux_uart1_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ - AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ - AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ - AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ - >; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; - status = "okay"; -}; - -/* USB */ -&cppi41dma { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1 { - dr_mode = "host"; - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; |