diff options
Diffstat (limited to 'arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts')
| -rw-r--r-- | arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 196 |
1 files changed, 0 insertions, 196 deletions
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts deleted file mode 100644 index 8f510458ea86..000000000000 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ /dev/null @@ -1,196 +0,0 @@ -/* - * Device Tree file for OpenBlocks AX3-4 board - * - * Copyright (C) 2012 Marvell - * - * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -/dts-v1/; -/include/ "armada-xp-mv78260.dtsi" - -/ { - model = "PlatHome OpenBlocks AX3-4 board"; - compatible = "plathome,openblocks-ax3-4", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp"; - - chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { - device_type = "memory"; - reg = <0 0x00000000 0 0xC0000000>; /* 3 GB */ - }; - - soc { - ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ - 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ - 0xf0000000 0 0xf0000000 0x8000000 /* Device Bus, NOR 128MiB */>; - - internal-regs { - serial@12000 { - clock-frequency = <250000000>; - status = "okay"; - }; - serial@12100 { - clock-frequency = <250000000>; - status = "okay"; - }; - pinctrl { - led_pins: led-pins-0 { - marvell,pins = "mpp49", "mpp51", "mpp53"; - marvell,function = "gpio"; - }; - }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins>; - - red_led { - label = "red_led"; - gpios = <&gpio1 17 1>; - default-state = "off"; - }; - - yellow_led { - label = "yellow_led"; - gpios = <&gpio1 19 1>; - default-state = "off"; - }; - - green_led { - label = "green_led"; - gpios = <&gpio1 21 1>; - default-state = "off"; - linux,default-trigger = "heartbeat"; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - button@1 { - label = "Init Button"; - linux,code = <116>; - gpios = <&gpio1 28 0>; - }; - }; - - mdio { - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - - phy2: ethernet-phy@2 { - reg = <2>; - }; - - phy3: ethernet-phy@3 { - reg = <3>; - }; - }; - - ethernet@70000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "sgmii"; - }; - ethernet@74000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "sgmii"; - }; - ethernet@30000 { - status = "okay"; - phy = <&phy2>; - phy-mode = "sgmii"; - }; - ethernet@34000 { - status = "okay"; - phy = <&phy3>; - phy-mode = "sgmii"; - }; - i2c@11000 { - status = "okay"; - clock-frequency = <400000>; - }; - i2c@11100 { - status = "okay"; - clock-frequency = <400000>; - - s35390a: s35390a@30 { - compatible = "s35390a"; - reg = <0x30>; - }; - }; - sata@a0000 { - nr-ports = <2>; - status = "okay"; - }; - - /* Front side USB 0 */ - usb@50000 { - status = "okay"; - }; - - /* Front side USB 1 */ - usb@51000 { - status = "okay"; - }; - - /* USB interface in the mini-PCIe connector */ - usb@52000 { - status = "okay"; - }; - - devbus-bootcs@10400 { - status = "okay"; - ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */ - - /* Device Bus parameters are required */ - - /* Read parameters */ - devbus,bus-width = <8>; - devbus,turn-off-ps = <60000>; - devbus,badr-skew-ps = <0>; - devbus,acc-first-ps = <124000>; - devbus,acc-next-ps = <248000>; - devbus,rd-setup-ps = <0>; - devbus,rd-hold-ps = <0>; - - /* Write parameters */ - devbus,sync-enable = <0>; - devbus,wr-high-ps = <60000>; - devbus,wr-low-ps = <60000>; - devbus,ale-wr-ps = <60000>; - - /* NOR 128 MiB */ - nor@0 { - compatible = "cfi-flash"; - reg = <0 0x8000000>; - bank-width = <2>; - }; - }; - - pcie-controller { - status = "okay"; - /* Internal mini-PCIe connector */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - }; - }; - }; -}; |