diff options
Diffstat (limited to 'arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts')
| -rw-r--r-- | arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts | 756 |
1 files changed, 0 insertions, 756 deletions
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts deleted file mode 100644 index f973ea883b97..000000000000 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts +++ /dev/null @@ -1,756 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -// Copyright (c) 2021 Facebook Inc. -/dts-v1/; - -#include "aspeed-g6.dtsi" -#include <dt-bindings/gpio/aspeed-gpio.h> -#include <dt-bindings/usb/pd.h> - -/ { - model = "Facebook Bletchley BMC"; - compatible = "facebook,bletchley-bmc", "aspeed,ast2600"; - - aliases { - serial4 = &uart5; - }; - - chosen { - bootargs = "console=ttyS4,57600n8"; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x80000000>; - }; - - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, - <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, - <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>, - <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>; - }; - - spi_gpio: spi-gpio { - compatible = "spi-gpio"; - #address-cells = <1>; - #size-cells = <0>; - - gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; - gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>; - num-chipselects = <1>; - cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; - - tpmdev@0 { - compatible = "tcg,tpm_tis-spi"; - spi-max-frequency = <33000000>; - reg = <0>; - }; - }; - - switchphy: ethernet-phy@0 { - // Fixed link - }; - - leds { - compatible = "gpio-leds"; - - sys_log_id { - retain-state-shutdown; - default-state = "keep"; - gpios = <&front_leds 0 GPIO_ACTIVE_HIGH>; - }; - fan0_blue { - retain-state-shutdown; - default-state = "on"; - gpios = <&fan_ioexp 8 GPIO_ACTIVE_HIGH>; - }; - fan1_blue { - retain-state-shutdown; - default-state = "on"; - gpios = <&fan_ioexp 9 GPIO_ACTIVE_HIGH>; - }; - fan2_blue { - retain-state-shutdown; - default-state = "on"; - gpios = <&fan_ioexp 10 GPIO_ACTIVE_HIGH>; - }; - fan3_blue { - retain-state-shutdown; - default-state = "on"; - gpios = <&fan_ioexp 11 GPIO_ACTIVE_HIGH>; - }; - fan0_amber { - retain-state-shutdown; - default-state = "off"; - gpios = <&fan_ioexp 12 GPIO_ACTIVE_HIGH>; - }; - fan1_amber { - retain-state-shutdown; - default-state = "off"; - gpios = <&fan_ioexp 13 GPIO_ACTIVE_HIGH>; - }; - fan2_amber { - retain-state-shutdown; - default-state = "off"; - gpios = <&fan_ioexp 14 GPIO_ACTIVE_HIGH>; - }; - fan3_amber { - retain-state-shutdown; - default-state = "off"; - gpios = <&fan_ioexp 15 GPIO_ACTIVE_HIGH>; - }; - sled0_amber { - retain-state-shutdown; - default-state = "off"; - gpios = <&sled0_leds 0 GPIO_ACTIVE_LOW>; - }; - sled0_blue { - retain-state-shutdown; - default-state = "off"; - gpios = <&sled0_leds 1 GPIO_ACTIVE_LOW>; - }; - sled1_amber { - retain-state-shutdown; - default-state = "off"; - gpios = <&sled1_leds 0 GPIO_ACTIVE_LOW>; - }; - sled1_blue { - retain-state-shutdown; - default-state = "off"; - gpios = <&sled1_leds 1 GPIO_ACTIVE_LOW>; - }; - sled2_amber { - retain-state-shutdown; - default-state = "off"; - gpios = <&sled2_leds 0 GPIO_ACTIVE_LOW>; - }; - sled2_blue { - retain-state-shutdown; - default-state = "off"; - gpios = <&sled2_leds 1 GPIO_ACTIVE_LOW>; - }; - sled3_amber { - retain-state-shutdown; - default-state = "off"; - gpios = <&sled3_leds 0 GPIO_ACTIVE_LOW>; - }; - sled3_blue { - retain-state-shutdown; - default-state = "off"; - gpios = <&sled3_leds 1 GPIO_ACTIVE_LOW>; - }; - sled4_amber { - retain-state-shutdown; - default-state = "off"; - gpios = <&sled4_leds 0 GPIO_ACTIVE_LOW>; - }; - sled4_blue { - retain-state-shutdown; - default-state = "off"; - gpios = <&sled4_leds 1 GPIO_ACTIVE_LOW>; - }; - sled5_amber { - retain-state-shutdown; - default-state = "off"; - gpios = <&sled5_leds 0 GPIO_ACTIVE_LOW>; - }; - sled5_blue { - retain-state-shutdown; - default-state = "off"; - gpios = <&sled5_leds 1 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&mac2 { - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <&switchphy>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rgmii3_default>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&rtc { - status = "okay"; -}; - -&fmc { - status = "okay"; - flash@0 { - status = "okay"; - m25p,fast-read; - label = "bmc"; - spi-max-frequency = <50000000>; -#include "openbmc-flash-layout-128.dtsi" - }; -}; - -&spi2 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi2_default>; - - flash@0 { - status = "okay"; - m25p,fast-read; - label = "pnor"; - spi-max-frequency = <100000000>; - }; -}; - -&i2c0 { - status = "okay"; - /* TODO: Add ADC INA230 */ - - mp5023@40 { - compatible = "mps,mp5023"; - reg = <0x40>; - }; - - tmp421@4f { - compatible = "ti,tmp421"; - reg = <0x4f>; - }; - - sled0_ioexp: pca9539@76 { - compatible = "nxp,pca9539"; - reg = <0x76>; - #address-cells = <1>; - #size-cells = <0>; - gpio-controller; - #gpio-cells = <2>; - - gpio-line-names = - "SLED0_MS_DETECT1","SLED0_VBUS_BMC_EN","SLED0_INA230_ALERT","SLED0_P12V_STBY_ALERT", - "SLED0_SSD_ALERT","SLED0_MS_DETECT0","SLED0_RST_CCG5","SLED0_FUSB302_INT", - "SLED0_MD_STBY_RESET","SLED0_MD_IOEXP_EN_FAULT","SLED0_MD_DIR","SLED0_MD_DECAY", - "SLED0_MD_MODE1","SLED0_MD_MODE2","SLED0_MD_MODE3","power-host0"; - }; - - sled0_leds: pca9552@67 { - compatible = "nxp,pca9552"; - reg = <0x67>; - #address-cells = <1>; - #size-cells = <0>; - gpio-controller; - #gpio-cells = <2>; - - gpio-line-names = - "led-sled0-amber","led-sled0-blue","SLED0_RST_IOEXP","", - "","","","", - "","","","", - "","","",""; - }; - - sled0_fusb302: typec-portc@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - - connector { - compatible = "usb-c-connector"; - label = "USB-C"; - power-role = "dual"; - try-power-role = "sink"; - data-role = "dual"; - source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; - sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) - PDO_VAR(3000, 12000, 3000) - PDO_PPS_APDO(3000, 11000, 3000)>; - op-sink-microwatt = <10000000>; - }; - }; -}; - -&i2c1 { - status = "okay"; - /* TODO: Add ADC INA230 */ - - mp5023@40 { - compatible = "mps,mp5023"; - reg = <0x40>; - }; - - tmp421@4f { - compatible = "ti,tmp421"; - reg = <0x4f>; - }; - - sled1_ioexp: pca9539@76 { - compatible = "nxp,pca9539"; - reg = <0x76>; - #address-cells = <1>; - #size-cells = <0>; - gpio-controller; - #gpio-cells = <2>; - - gpio-line-names = - "SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT", - "SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT", - "SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY", - "SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1"; - }; - - sled1_leds: pca9552@67 { - compatible = "nxp,pca9552"; - reg = <0x67>; - #address-cells = <1>; - #size-cells = <0>; - gpio-controller; - #gpio-cells = <2>; - - gpio-line-names = - "led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","", - "","","","", - "","","","", - "","","",""; - }; - - sled1_fusb302: typec-portc@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - - connector { - compatible = "usb-c-connector"; - label = "USB-C"; - power-role = "dual"; - try-power-role = "sink"; - data-role = "dual"; - source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; - sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) - PDO_VAR(3000, 12000, 3000) - PDO_PPS_APDO(3000, 11000, 3000)>; - op-sink-microwatt = <10000000>; - }; - }; -}; - -&i2c1 { - status = "okay"; -}; - -&i2c2 { - status = "okay"; - /* TODO: Add ADC INA230 */ - - mp5023@40 { - compatible = "mps,mp5023"; - reg = <0x40>; - }; - - tmp421@4f { - compatible = "ti,tmp421"; - reg = <0x4f>; - }; - - sled2_ioexp: pca9539@76 { - compatible = "nxp,pca9539"; - reg = <0x76>; - #address-cells = <1>; - #size-cells = <0>; - gpio-controller; - #gpio-cells = <2>; - - gpio-line-names = - "SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT", - "SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT", - "SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY", - "SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2"; - }; - - sled2_leds: pca9552@67 { - compatible = "nxp,pca9552"; - reg = <0x67>; - #address-cells = <1>; - #size-cells = <0>; - gpio-controller; - #gpio-cells = <2>; - - gpio-line-names = - "led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","", - "","","","", - "","","","", - "","","",""; - }; - - sled2_fusb302: typec-portc@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - - connector { - compatible = "usb-c-connector"; - label = "USB-C"; - power-role = "dual"; - try-power-role = "sink"; - data-role = "dual"; - source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; - sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) - PDO_VAR(3000, 12000, 3000) - PDO_PPS_APDO(3000, 11000, 3000)>; - op-sink-microwatt = <10000000>; - }; - }; -}; - -&i2c3 { - status = "okay"; - /* TODO: Add ADC INA230 */ - - mp5023@40 { - compatible = "mps,mp5023"; - reg = <0x40>; - }; - - tmp421@4f { - compatible = "ti,tmp421"; - reg = <0x4f>; - }; - - sled3_ioexp: pca9539@76 { - compatible = "nxp,pca9539"; - reg = <0x76>; - #address-cells = <1>; - #size-cells = <0>; - gpio-controller; - #gpio-cells = <2>; - - gpio-line-names = - "SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT", - "SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT", - "SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY", - "SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3"; - }; - - sled3_leds: pca9552@67 { - compatible = "nxp,pca9552"; - reg = <0x67>; - #address-cells = <1>; - #size-cells = <0>; - gpio-controller; - #gpio-cells = <2>; - - gpio-line-names = - "led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","", - "","","","", - "","","","", - "","","",""; - }; - - sled3_fusb302: typec-portc@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - - connector { - compatible = "usb-c-connector"; - label = "USB-C"; - power-role = "dual"; - try-power-role = "sink"; - data-role = "dual"; - source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; - sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) - PDO_VAR(3000, 12000, 3000) - PDO_PPS_APDO(3000, 11000, 3000)>; - op-sink-microwatt = <10000000>; - }; - }; -}; - -&i2c4 { - status = "okay"; - /* TODO: Add ADC INA230 */ - - mp5023@40 { - compatible = "mps,mp5023"; - reg = <0x40>; - }; - - tmp421@4f { - compatible = "ti,tmp421"; - reg = <0x4f>; - }; - - sled4_ioexp: pca9539@76 { - compatible = "nxp,pca9539"; - reg = <0x76>; - #address-cells = <1>; - #size-cells = <0>; - gpio-controller; - #gpio-cells = <2>; - - gpio-line-names = - "SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT", - "SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT", - "SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY", - "SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4"; - }; - - sled4_leds: pca9552@67 { - compatible = "nxp,pca9552"; - reg = <0x67>; - #address-cells = <1>; - #size-cells = <0>; - gpio-controller; - #gpio-cells = <2>; - - gpio-line-names = - "led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","", - "","","","", - "","","","", - "","","",""; - }; - - sled4_fusb302: typec-portc@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - - connector { - compatible = "usb-c-connector"; - label = "USB-C"; - power-role = "dual"; - try-power-role = "sink"; - data-role = "dual"; - source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; - sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) - PDO_VAR(3000, 12000, 3000) - PDO_PPS_APDO(3000, 11000, 3000)>; - op-sink-microwatt = <10000000>; - }; - }; -}; - -&i2c5 { - status = "okay"; - /* TODO: Add ADC INA230 */ - - mp5023@40 { - compatible = "mps,mp5023"; - reg = <0x40>; - }; - - tmp421@4f { - compatible = "ti,tmp421"; - reg = <0x4f>; - }; - - sled5_ioexp: pca9539@76 { - compatible = "nxp,pca9539"; - reg = <0x76>; - #address-cells = <1>; - #size-cells = <0>; - gpio-controller; - #gpio-cells = <2>; - - gpio-line-names = - "SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT", - "SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT", - "SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY", - "SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5"; - }; - - sled5_leds: pca9552@67 { - compatible = "nxp,pca9552"; - reg = <0x67>; - #address-cells = <1>; - #size-cells = <0>; - gpio-controller; - #gpio-cells = <2>; - - gpio-line-names = - "led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","", - "","","","", - "","","","", - "","","",""; - }; - - sled5_fusb302: typec-portc@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - - connector { - compatible = "usb-c-connector"; - label = "USB-C"; - power-role = "dual"; - try-power-role = "sink"; - data-role = "dual"; - source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; - sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) - PDO_VAR(3000, 12000, 3000) - PDO_PPS_APDO(3000, 11000, 3000)>; - op-sink-microwatt = <10000000>; - }; - }; -}; - -&i2c6 { - status = "okay"; - - eeprom@56 { - compatible = "atmel,24c64"; - reg = <0x56>; - }; - - rtc@51 { - compatible = "nxp,pcf85263"; - reg = <0x51>; - }; -}; - -&i2c7 { - status = "okay"; - - eeprom@54 { - compatible = "atmel,24c64"; - reg = <0x54>; - }; -}; - -&i2c9 { - status = "okay"; - - tmp421@4f { - compatible = "ti,tmp421"; - reg = <0x4f>; - }; -}; - -&i2c10 { - status = "okay"; - - tmp421@4f { - compatible = "ti,tmp421"; - reg = <0x4f>; - }; - - hdc1080@40 { - compatible = "ti,hdc1080"; - reg = <0x40>; - }; - - front_leds: pca9552@67 { - compatible = "nxp,pca9552"; - reg = <0x67>; - #address-cells = <1>; - #size-cells = <0>; - gpio-controller; - #gpio-cells = <2>; - - gpio-line-names = - "led-fault-identify","power-p5v-stby-good", - "power-p1v0-dvdd-good","power-p1v0-avdd-good", - "","","","", - "","","","", - "","","",""; - }; -}; - -&i2c12 { - status = "okay"; - - adm1278@11 { - compatible = "adi,adm1278"; - reg = <0x11>; - }; - - tmp421@4c { - compatible = "ti,tmp421"; - reg = <0x4c>; - }; - - tmp421@4d { - compatible = "ti,tmp421"; - reg = <0x4d>; - }; - - fan_ioexp: pca9552@67 { - compatible = "nxp,pca9552"; - reg = <0x67>; - #address-cells = <1>; - #size-cells = <0>; - gpio-controller; - #gpio-cells = <2>; - - gpio-line-names = - "presence-fan0","presence-fan1", - "presence-fan2","presence-fan3", - "power-fan0-good","power-fan1-good", - "power-fan2-good","power-fan3-good", - "","","","", - "","","",""; - }; -}; - -&i2c13 { - multi-master; - aspeed,hw-timeout-ms = <1000>; - status = "okay"; -}; - -&gpio0 { - gpio-line-names = - /*A0-A7*/ "","","","","","","","", - /*B0-B7*/ "","","SEL_SPI2_MUX","SPI2_MUX1", - "SPI2_MUX2","SPI2_MUX3","","", - /*C0-C7*/ "","","","","","","","", - /*D0-D7*/ "","","","","","","","", - /*E0-E7*/ "","","","","","","","", - /*F0-F7*/ "","","","","","","","", - /*G0-G7*/ "","SWITCH_FRU_MUX","","","","","","", - /*H0-H7*/ "presence-riser1","presence-riser2", - "presence-sled0","presence-sled1", - "presence-sled2","presence-sled3", - "presence-sled4","presence-sled5", - /*I0-I7*/ "REV_ID0","","REV_ID1","REV_ID2", - "","","","", - /*J0-J7*/ "","","","","","","","", - /*K0-K7*/ "","","","","","","","", - /*L0-L7*/ "","","","","","","","", - /*M0-M7*/ "ALERT_SLED0","ALERT_SLED1", - "ALERT_SLED2","ALERT_SLED3", - "ALERT_SLED4","ALERT_SLED5", - "P12V_AUX_ALERT1","", - /*N0-N7*/ "","","","","","","","", - /*O0-O7*/ "","","","", - "","BOARD_ID0","BOARD_ID1","BOARD_ID2", - /*P0-P7*/ "","","","","","","","", - /*Q0-Q7*/ "","","","","","","","", - /*R0-R7*/ "","","","","","","","", - /*S0-S7*/ "","","","BAT_DETECT", - "BMC_BT_WP0","BMC_BT_WP1","","", - /*T0-T7*/ "","","","","","","","", - /*U0-U7*/ "","","","","","","","", - /*V0-V7*/ "","RST_BMC_MVL","","", - "USB2_SEL0_A","USB2_SEL1_A", - "USB2_SEL0_B","USB2_SEL1_B", - /*W0-W7*/ "RST_FRONT_IOEXP","","","","","","","", - /*X0-X7*/ "","","","","","","","", - /*Y0-Y7*/ "","","BSM_FLASH_LATCH","","","","","", - /*Z0-Z7*/ "","","","","","","",""; -}; - -&adc0 { - vref = <1800>; - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default - &pinctrl_adc2_default &pinctrl_adc3_default - &pinctrl_adc4_default &pinctrl_adc5_default - &pinctrl_adc6_default &pinctrl_adc7_default>; -}; - -&adc1 { - vref = <2500>; - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default - &pinctrl_adc10_default &pinctrl_adc11_default - &pinctrl_adc12_default &pinctrl_adc13_default - &pinctrl_adc14_default &pinctrl_adc15_default>; -}; |
