summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts')
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts420
1 files changed, 0 insertions, 420 deletions
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
deleted file mode 100644
index 63a3dd548f30..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
+++ /dev/null
@@ -1,420 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2019 Facebook Inc.
-/dts-v1/;
-
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include "ast2500-facebook-netbmc-common.dtsi"
-
-/ {
- model = "Facebook Wedge 400 BMC";
- compatible = "facebook,wedge400-bmc", "aspeed,ast2500";
-
- aliases {
- /*
- * PCA9548 (2-0070) provides 8 channels connecting to
- * SCM (System Controller Module).
- */
- i2c16 = &imux16;
- i2c17 = &imux17;
- i2c18 = &imux18;
- i2c19 = &imux19;
- i2c20 = &imux20;
- i2c21 = &imux21;
- i2c22 = &imux22;
- i2c23 = &imux23;
-
- /*
- * PCA9548 (8-0070) provides 8 channels connecting to
- * SMB (Switch Main Board).
- */
- i2c24 = &imux24;
- i2c25 = &imux25;
- i2c26 = &imux26;
- i2c27 = &imux27;
- i2c28 = &imux28;
- i2c29 = &imux29;
- i2c30 = &imux30;
- i2c31 = &imux31;
-
- /*
- * PCA9548 (11-0076) provides 8 channels connecting to
- * FCM (Fan Controller Module).
- */
- i2c32 = &imux32;
- i2c33 = &imux33;
- i2c34 = &imux34;
- i2c35 = &imux35;
- i2c36 = &imux36;
- i2c37 = &imux37;
- i2c38 = &imux38;
- i2c39 = &imux39;
-
- spi2 = &spi_gpio;
- };
-
- chosen {
- stdout-path = &uart1;
- bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
- };
-
- ast-adc-hwmon {
- compatible = "iio-hwmon";
- io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
- };
-
- /*
- * GPIO-based SPI Master is required to access SPI TPM, because
- * full-duplex SPI transactions are not supported by ASPEED SPI
- * Controllers.
- */
- spi_gpio: spi-gpio {
- status = "okay";
- compatible = "spi-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>;
- gpio-sck = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
- gpio-mosi = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
- gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
- num-chipselects = <1>;
-
- tpmdev@0 {
- compatible = "tcg,tpm_tis-spi";
- spi-max-frequency = <33000000>;
- reg = <0>;
- };
- };
-};
-
-/*
- * Both firmware flashes are 128MB on Wedge400 BMC.
- */
-&fmc_flash0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- /*
- * u-boot partition: 384KB.
- */
- u-boot@0 {
- reg = <0x0 0x60000>;
- label = "u-boot";
- };
-
- /*
- * u-boot environment variables: 128KB.
- */
- u-boot-env@60000 {
- reg = <0x60000 0x20000>;
- label = "env";
- };
-
- /*
- * FIT image: 123.5 MB.
- */
- fit@80000 {
- reg = <0x80000 0x7b80000>;
- label = "fit";
- };
-
- /*
- * "data0" partition (4MB) is reserved for persistent
- * data store.
- */
- data0@7c00000 {
- reg = <0x7c00000 0x400000>;
- label = "data0";
- };
-
- /*
- * "flash0" partition (covering the entire flash) is
- * explicitly created to avoid breaking legacy applications.
- */
- flash0@0 {
- reg = <0x0 0x8000000>;
- label = "flash0";
- };
- };
-};
-
-&fmc_flash1 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- flash1@0 {
- reg = <0x0 0x8000000>;
- label = "flash1";
- };
- };
-};
-
-&uart2 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_txd2_default
- &pinctrl_rxd2_default>;
-};
-
-&uart4 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_txd4_default
- &pinctrl_rxd4_default>;
-};
-
-/*
- * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC
- * communication.
- */
-&i2c0 {
- status = "okay";
- multi-master;
- bus-frequency = <1000000>;
-};
-
-&i2c1 {
- status = "okay";
-};
-
-&i2c2 {
- status = "okay";
-
- i2c-switch@70 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x70>;
- i2c-mux-idle-disconnect;
-
- imux16: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux17: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux18: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux19: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux20: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux21: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux22: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux23: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-};
-
-&i2c3 {
- status = "okay";
-};
-
-&i2c4 {
- status = "okay";
-};
-
-&i2c5 {
- status = "okay";
-};
-
-&i2c6 {
- status = "okay";
-};
-
-&i2c7 {
- status = "okay";
-};
-
-&i2c8 {
- status = "okay";
-
- i2c-switch@70 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x70>;
- i2c-mux-idle-disconnect;
-
- imux24: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux25: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux26: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux27: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux28: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux29: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux30: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux31: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
-
- };
-};
-
-&i2c9 {
- status = "okay";
-};
-
-&i2c10 {
- status = "okay";
-};
-
-&i2c11 {
- status = "okay";
-
- i2c-switch@76 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76>;
- i2c-mux-idle-disconnect;
-
- imux32: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux33: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux34: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux35: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux36: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux37: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux38: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux39: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
-
- };
-};
-
-&i2c12 {
- status = "okay";
-};
-
-&i2c13 {
- status = "okay";
-};
-
-&adc {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&uhci {
- status = "okay";
-};
-
-&sdhci1 {
- /*
- * DMA mode needs to be disabled to avoid conflicts with UHCI
- * Controller in AST2500 SoC.
- */
- sdhci-caps-mask = <0x0 0x580000>;
-};
generated by cgit (git 2.34.1) at 2025-12-28 20:30:51 +0000