1 files changed, 0 insertions, 69 deletions
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
deleted file mode 100644
index 91a71774472e..000000000000
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board
- *
- *  Copyright (C) 2012 Atmel,
- *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
- */
-/dts-v1/;
-#include "at91sam9g25.dtsi"
-#include "at91sam9x5ek.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9G25-EK";
-	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
-
-	ahb {
-		apb {
-			spi0: spi@f0000000 {
-				status = "disabled";
-			};
-
-			mmc1: mmc@f000c000 {
-				status = "disabled";
-			};
-
-			i2c0: i2c@f8010000 {
-				ov2640: camera@0x30 {
-					compatible = "ovti,ov2640";
-					reg = <0x30>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
-					resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
-					pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
-					clocks = <&pck0>;
-					clock-names = "xvclk";
-					assigned-clocks = <&pck0>;
-					assigned-clock-rates = <25000000>;
-					status = "okay";
-
-					port {
-						ov2640_0: endpoint {
-							remote-endpoint = <&isi_0>;
-							bus-width = <8>;
-						};
-					};
-				};
-			};
-
-			macb0: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			isi: isi@f8048000 {
-				status = "okay";
-				port {
-					isi_0: endpoint@0 {
-						reg = <0>;
-						remote-endpoint = <&ov2640_0>;
-						bus-width = <8>;
-						vsync-active = <1>;
-						hsync-active = <1>;
-					};
-				};
-			};
-		};
-	};
-};