1 files changed, 0 insertions, 129 deletions
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
deleted file mode 100644
index d59b70c6a6a0..000000000000
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * at91sam9n12ek.dts - Device Tree file for AT91SAM9N12-EK board
- *
- *  Copyright (C) 2012 Atmel,
- *                2012 Hong Xu <hong.xu@atmel.com>
- *
- * Licensed under GPLv2 or later.
- */
-/dts-v1/;
-#include "at91sam9n12.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9N12-EK";
-	compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "mem=128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
-	};
-
-	memory {
-		reg = <0x20000000 0x10000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <16000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			i2c0: i2c@f8010000 {
-				status = "okay";
-			};
-
-			i2c1: i2c@f8014000 {
-				status = "okay";
-			};
-
-			mmc0: mmc@f0008000 {
-				pinctrl-0 = <
-					&pinctrl_board_mmc0
-					&pinctrl_mmc0_slot0_clk_cmd_dat0
-					&pinctrl_mmc0_slot0_dat1_3>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			pinctrl@fffff400 {
-				mmc0 {
-					pinctrl_board_mmc0: mmc0-board {
-						atmel,pins =
-							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PA7 gpio CD pin pull up and deglitch */
-					};
-				};
-			};
-
-			spi0: spi@f0000000 {
-				status = "okay";
-				cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
-				m25p80@0 {
-					compatible = "atmel,at25df321a";
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-				};
-			};
-
-			watchdog@fffffe40 {
-				status = "okay";
-			};
-		};
-
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			atmel,has-pmecc;
-			atmel,pmecc-cap = <2>;
-			atmel,pmecc-sector-size = <512>;
-			nand-on-flash-bbt;
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		d8 {
-			label = "d8";
-			gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "mmc0";
-		};
-
-		d9 {
-			label = "d6";
-			gpios = <&pioB 5 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "nand-disk";
-		};
-
-		d10 {
-			label = "d7";
-			gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		enter {
-			label = "Enter";
-			gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
-			linux,code = <28>;
-			gpio-key,wakeup;
-		};
-	};
-};