diff options
Diffstat (limited to 'arch/arm/boot/dts/at91sam9x5ek.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/at91sam9x5ek.dtsi | 165 |
1 files changed, 0 insertions, 165 deletions
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi deleted file mode 100644 index 9d2bbc41a7b0..000000000000 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ /dev/null @@ -1,165 +0,0 @@ -/* - * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board - * - * Copyright (C) 2012 Atmel, - * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> - * - * Licensed under GPLv2 or later. - */ -#include "at91sam9x5cm.dtsi" - -/ { - model = "Atmel AT91SAM9X5-EK"; - compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; - - chosen { - bootargs = "root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; - stdout-path = "serial0:115200n8"; - }; - - ahb { - apb { - mmc0: mmc@f0008000 { - pinctrl-0 = < - &pinctrl_board_mmc0 - &pinctrl_mmc0_slot0_clk_cmd_dat0 - &pinctrl_mmc0_slot0_dat1_3>; - status = "okay"; - slot@0 { - reg = <0>; - bus-width = <4>; - cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; - }; - }; - - mmc1: mmc@f000c000 { - pinctrl-0 = < - &pinctrl_board_mmc1 - &pinctrl_mmc1_slot0_clk_cmd_dat0 - &pinctrl_mmc1_slot0_dat1_3>; - status = "okay"; - slot@0 { - reg = <0>; - bus-width = <4>; - cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>; - }; - }; - - dbgu: serial@fffff200 { - status = "okay"; - }; - - usart0: serial@f801c000 { - status = "okay"; - }; - - usb2: gadget@f803c000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_board_usb2>; - atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; - - i2c0: i2c@f8010000 { - status = "okay"; - - wm8731: wm8731@1a { - compatible = "wm8731"; - reg = <0x1a>; - }; - }; - - adc0: adc@f804c000 { - atmel,adc-ts-wires = <4>; - atmel,adc-ts-pressure-threshold = <10000>; - status = "okay"; - }; - - pinctrl@fffff400 { - camera_sensor { - pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 { - atmel,pins = - <AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_MCK */ - }; - - pinctrl_sensor_power: sensor_power-0 { - atmel,pins = - <AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; - }; - - pinctrl_sensor_reset: sensor_reset-0 { - atmel,pins = - <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; - }; - }; - - mmc0 { - pinctrl_board_mmc0: mmc0-board { - atmel,pins = - <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */ - }; - }; - - mmc1 { - pinctrl_board_mmc1: mmc1-board { - atmel,pins = - <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD14 gpio CD pin pull up and deglitch */ - }; - }; - - usb2 { - pinctrl_board_usb2: usb2-board { - atmel,pins = - <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB16 gpio vbus sense, deglitch */ - }; - }; - }; - - spi0: spi@f0000000 { - status = "disabled"; /* conflicts with mmc1 */ - cs-gpios = <&pioA 14 0>, <0>, <0>, <0>; - m25p80@0 { - compatible = "atmel,at25df321a"; - spi-max-frequency = <50000000>; - reg = <0>; - }; - }; - - watchdog@fffffe40 { - status = "okay"; - }; - - ssc0: ssc@f0010000 { - status = "okay"; - }; - }; - - usb0: ohci@00600000 { - status = "okay"; - num-ports = <3>; - atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */ - &pioD 19 GPIO_ACTIVE_LOW - &pioD 20 GPIO_ACTIVE_LOW - >; - }; - - usb1: ehci@00700000 { - status = "okay"; - }; - }; - - sound { - compatible = "atmel,sam9x5-wm8731-audio"; - - atmel,model = "wm8731 @ AT91SAM9X5EK"; - - atmel,audio-routing = - "Headphone Jack", "RHPOUT", - "Headphone Jack", "LHPOUT", - "LLINEIN", "Line In Jack", - "RLINEIN", "Line In Jack"; - - atmel,ssc-controller = <&ssc0>; - atmel,audio-codec = <&wm8731>; - }; -}; |