summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/imx28-cfa10049.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/imx28-cfa10049.dts')
-rw-r--r--arch/arm/boot/dts/imx28-cfa10049.dts356
1 files changed, 0 insertions, 356 deletions
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
deleted file mode 100644
index 04b2f769ffbd..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ /dev/null
@@ -1,356 +0,0 @@
-/*
- * Copyright 2012 Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-/include/ "imx28-cfa10036.dts"
-
-/ {
- model = "Crystalfontz CFA-10049 Board";
- compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28";
-
- apb@80000000 {
- apbh@80000000 {
- pinctrl@80018000 {
- pinctrl-names = "default", "default";
- pinctrl-1 = <&hog_pins_cfa10049
- &hog_pins_cfa10049_pullup>;
-
- hog_pins_cfa10049: hog-10049@0 {
- reg = <0>;
- fsl,pinmux-ids = <
- 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
- 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
- 0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
- 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
- 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
- >;
- fsl,drive-strength = <0>;
- fsl,voltage = <1>;
- fsl,pull-up = <0>;
- };
-
- hog_pins_cfa10049_pullup: hog-10049-pullup@0 {
- reg = <0>;
- fsl,pinmux-ids = <
- 0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
- 0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
- 0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
- 0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
- 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
- >;
- fsl,drive-strength = <0>;
- fsl,voltage = <1>;
- fsl,pull-up = <1>;
- };
-
- spi2_pins_cfa10049: spi2-cfa10049@0 {
- reg = <0>;
- fsl,pinmux-ids = <
- 0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
- 0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
- 0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
- >;
- fsl,drive-strength = <1>;
- fsl,voltage = <1>;
- fsl,pull-up = <1>;
- };
-
- spi3_pins_cfa10049: spi3-cfa10049@0 {
- reg = <0>;
- fsl,pinmux-ids = <
- 0x0183 /* MX28_PAD_GPMI_RDN__GPIO_0_24 */
- 0x01c3 /* MX28_PAD_GPMI_RESETN__GPIO_0_28 */
- 0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
- 0x01a3 /* MX28_PAD_GPMI_ALE__GPIO_0_26 */
- 0x01b3 /* MX28_PAD_GPMI_CLE__GPIO_0_27 */
- >;
- fsl,drive-strength = <1>;
- fsl,voltage = <1>;
- fsl,pull-up = <1>;
- };
-
- lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
- reg = <0>;
- fsl,pinmux-ids = <
- 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
- 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
- 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
- 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
- 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
- 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
- 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
- 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
- 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
- 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
- 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
- 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
- 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
- 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
- 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
- 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
- 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
- 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
- >;
- fsl,drive-strength = <0>;
- fsl,voltage = <1>;
- fsl,pull-up = <0>;
- };
-
- lcdif_pins_cfa10049: lcdif-evk@0 {
- reg = <0>;
- fsl,pinmux-ids = <
- 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
- 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
- 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
- 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
- >;
- fsl,drive-strength = <0>;
- fsl,voltage = <1>;
- fsl,pull-up = <0>;
- };
-
- w1_gpio_pins: w1-gpio@0 {
- reg = <0>;
- fsl,pinmux-ids = <
- 0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */
- >;
- fsl,drive-strength = <1>;
- fsl,voltage = <1>;
- fsl,pull-up = <0>; /* 0 will enable the keeper */
- };
- };
-
- lcdif@80030000 {
- pinctrl-names = "default";
- pinctrl-0 = <&lcdif_18bit_pins_cfa10049
- &lcdif_pins_cfa10049>;
- display = <&display>;
- status = "okay";
-
- display: display {
- bits-per-pixel = <32>;
- bus-width = <18>;
-
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <9216000>;
- hactive = <320>;
- vactive = <480>;
- hback-porch = <2>;
- hfront-porch = <2>;
- vback-porch = <2>;
- vfront-porch = <2>;
- hsync-len = <15>;
- vsync-len = <15>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
- };
- };
- };
-
- apbx@80040000 {
- pwm: pwm@80064000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm3_pins_b>;
- status = "okay";
- };
-
- i2c1: i2c@8005a000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
- };
-
- i2cmux {
- compatible = "i2c-mux-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
- i2c-parent = <&i2c1>;
-
- i2c@0 {
- reg = <0>;
- };
-
- i2c@1 {
- reg = <1>;
- };
-
- i2c@2 {
- reg = <2>;
- };
-
- i2c@3 {
- reg = <3>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pca9555: pca9555@20 {
- compatible = "nxp,pca9555";
- interrupt-parent = <&gpio2>;
- interrupts = <19 0x2>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x20>;
- };
- };
- };
-
- usbphy1: usbphy@8007e000 {
- status = "okay";
- };
-
- lradc@80050000 {
- status = "okay";
- fsl,lradc-touchscreen-wires = <4>;
- };
- };
- };
-
- ahb@80080000 {
- usb1: usb@80090000 {
- vbus-supply = <&reg_usb1_vbus>;
- pinctrl-0 = <&usbphy1_pins_a>;
- pinctrl-names = "default";
- status = "okay";
- };
- };
-
- regulators {
- compatible = "simple-bus";
-
- reg_usb1_vbus: usb1_vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio0 7 1>;
- };
- };
-
- ahb@80080000 {
- mac0: ethernet@800f0000 {
- phy-mode = "rmii";
- pinctrl-names = "default";
- pinctrl-0 = <&mac0_pins_a>;
- phy-reset-gpios = <&gpio2 21 0>;
- phy-reset-duration = <100>;
- status = "okay";
- };
- };
-
- spi2 {
- compatible = "spi-gpio";
- pinctrl-names = "default";
- pinctrl-0 = <&spi2_pins_cfa10049>;
- status = "okay";
- gpio-sck = <&gpio2 16 0>;
- gpio-mosi = <&gpio2 17 0>;
- gpio-miso = <&gpio2 18 0>;
- cs-gpios = <&gpio3 5 0>;
- num-chipselects = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- hx8357: hx8357@0 {
- compatible = "himax,hx8357b", "himax,hx8357";
- reg = <0>;
- spi-max-frequency = <100000>;
- spi-cpol;
- spi-cpha;
- gpios-reset = <&gpio3 30 0>;
- im-gpios = <&gpio5 4 0 &gpio5 5 0 &gpio5 6 0>;
- };
- };
-
- spi3 {
- compatible = "spi-gpio";
- pinctrl-names = "default";
- pinctrl-0 = <&spi3_pins_cfa10049>;
- status = "okay";
- gpio-sck = <&gpio0 24 0>;
- gpio-mosi = <&gpio0 28 0>;
- cs-gpios = <&gpio0 17 0 &gpio0 26 0 &gpio0 27 0>;
- num-chipselects = <3>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- gpio5: gpio5@0 {
- compatible = "fairchild,74hc595";
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0>;
- registers-number = <2>;
- spi-max-frequency = <100000>;
- };
-
- gpio6: gpio6@1 {
- compatible = "fairchild,74hc595";
- gpio-controller;
- #gpio-cells = <2>;
- reg = <1>;
- registers-number = <4>;
- spi-max-frequency = <100000>;
- };
-
- dac0: dh2228@2 {
- compatible = "rohm,dh2228fv";
- reg = <2>;
- spi-max-frequency = <100000>;
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-
- rotary_button {
- label = "rotary_button";
- gpios = <&gpio3 26 1>;
- debounce-interval = <10>;
- linux,code = <28>;
- };
- };
-
- rotary {
- compatible = "rotary-encoder";
- gpios = <&gpio3 24 1>, <&gpio3 25 1>;
- linux,axis = <1>; /* REL_Y */
- rotary-encoder,relative-axis;
- };
-
- backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm 3 5000000>;
- brightness-levels = <0 4 8 16 32 64 128 255>;
- default-brightness-level = <6>;
-
- };
-
- onewire@0 {
- compatible = "w1-gpio";
- pinctrl-names = "default";
- pinctrl-0 = <&w1_gpio_pins>;
- status = "okay";
- gpios = <&gpio1 21 0>;
- };
-};
generated by cgit (git 2.34.1) at 2025-12-26 20:56:28 +0000