diff options
Diffstat (limited to 'arch/arm/boot/dts/imx28-cfa10057.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx28-cfa10057.dts | 191 |
1 files changed, 0 insertions, 191 deletions
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts deleted file mode 100644 index 2da713cdb42a..000000000000 --- a/arch/arm/boot/dts/imx28-cfa10057.dts +++ /dev/null @@ -1,191 +0,0 @@ -/* - * Copyright 2013 Crystalfontz America, Inc. - * Copyright 2012 Free Electrons - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/* - * The CFA-10057 is an expansion board for the CFA-10036 module, thus we - * need to include the CFA-10036 DTS. - */ -/include/ "imx28-cfa10036.dts" - -/ { - model = "Crystalfontz CFA-10057 Board"; - compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28"; - - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - pinctrl-names = "default", "default"; - pinctrl-1 = <&hog_pins_cfa10057 - &hog_pins_cfa10057_pullup>; - - hog_pins_cfa10057: hog-10057@0 { - reg = <0>; - fsl,pinmux-ids = < - 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ - 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ - >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; - }; - - hog_pins_cfa10057_pullup: hog-10057-pullup@0 { - reg = <0>; - fsl,pinmux-ids = < - 0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */ - 0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */ - 0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */ - 0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */ - 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ - >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <1>; - }; - - lcdif_18bit_pins_cfa10057: lcdif-18bit@0 { - reg = <0>; - fsl,pinmux-ids = < - 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ - 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ - 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ - 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ - 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ - 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ - 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ - 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ - 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ - 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ - 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ - 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ - 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ - 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ - 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ - 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ - 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */ - 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */ - >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; - }; - - lcdif_pins_cfa10057: lcdif-evk@0 { - reg = <0>; - fsl,pinmux-ids = < - 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ - 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ - 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ - 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ - >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_18bit_pins_cfa10057 - &lcdif_pins_cfa10057>; - display = <&display>; - status = "okay"; - - display: display { - bits-per-pixel = <32>; - bus-width = <18>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <30000000>; - hactive = <480>; - vactive = <800>; - hfront-porch = <12>; - hback-porch = <2>; - vfront-porch = <5>; - vback-porch = <3>; - hsync-len = <2>; - vsync-len = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - fsl,lradc-touchscreen-wires = <4>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pins_b>; - status = "okay"; - }; - - i2c1: i2c@8005a000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb1: usb@80090000 { - vbus-supply = <®_usb1_vbus>; - pinctrl-0 = <&usbphy1_pins_a>; - pinctrl-names = "default"; - status = "okay"; - }; - }; - - regulators { - compatible = "simple-bus"; - - reg_usb1_vbus: usb1_vbus { - compatible = "regulator-fixed"; - regulator-name = "usb1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio0 7 1>; - }; - }; - - ahb@80080000 { - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio2 21 0>; - phy-reset-duration = <100>; - status = "okay"; - }; - }; - - backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 3 5000000>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <7>; - }; -}; |