1 files changed, 0 insertions, 96 deletions
diff --git a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts
deleted file mode 100644
index 19d56e9aec9d..000000000000
--- a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for Netgear WG302v2 based on IXP422BB
- * Derived from boardfiles written by Imre Kaloz
- */
-
-/dts-v1/;
-
-#include "intel-ixp42x.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Netgear WG302 v1";
-	compatible = "netgear,wg302v1", "intel,ixp42x";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/* 32 MB SDRAM according to boot arguments */
-		device_type = "memory";
-		reg = <0x00000000 0x02000000>;
-	};
-
-	chosen {
-		/* The RedBoot comes up in 9600 baud so let's keep this */
-		bootargs = "console=ttyS0,9600n8";
-		stdout-path = "uart1:9600n8";
-	};
-
-	aliases {
-		/* These are switched around */
-		serial0 = &uart1;
-	};
-
-	soc {
-		bus@c4000000 {
-			flash@0,0 {
-				compatible = "intel,ixp4xx-flash", "cfi-flash";
-				bank-width = <2>;
-				/*
-				 * 8 MB of Flash in 64 0x20000 sized blocks
-				 * mapped in at CS0.
-				 */
-				reg = <0 0x00000000 0x800000>;
-
-				/* Configure expansion bus to allow writes */
-				intel,ixp4xx-eb-write-enable = <1>;
-
-				partitions {
-					compatible = "redboot-fis";
-					fis-index-block = <0x3f>;
-				};
-			};
-		};
-
-		pci@c0000000 {
-			status = "okay";
-
-			/*
-			 * Taken from WG302 v2 PCI boardfile (wg302v2-pci.c)
-			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
-			 * each handling all IRQs.
-			 */
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-			/* IDSEL 1 */
-			<0x0800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 8 */
-			<0x0800 0 0 2 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 8 */
-			<0x0800 0 0 3 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 8 */
-			<0x0800 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
-			/* IDSEL 2 */
-			<0x1000 0 0 1 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 9 */
-			<0x1000 0 0 2 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
-			<0x1000 0 0 3 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 9 */
-			<0x1000 0 0 4 &gpio0 9 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 9 */
-		};
-
-		ethernet@c8009000 {
-			status = "okay";
-			queue-rx = <&qmgr 3>;
-			queue-txready = <&qmgr 20>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy30>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				phy30: ethernet-phy@30 {
-					reg = <30>;
-				};
-			};
-		};
-	};
-};