diff options
Diffstat (limited to 'arch/arm/boot/dts/meson.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/meson.dtsi | 310 |
1 files changed, 0 insertions, 310 deletions
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi deleted file mode 100644 index e4645f612712..000000000000 --- a/arch/arm/boot/dts/meson.dtsi +++ /dev/null @@ -1,310 +0,0 @@ -/* - * Copyright 2014 Carlo Caione <carlo@caione.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -/include/ "skeleton.dtsi" - -/ { - interrupt-parent = <&gic>; - - L2: l2-cache-controller@c4200000 { - compatible = "arm,pl310-cache"; - reg = <0xc4200000 0x1000>; - cache-unified; - cache-level = <2>; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - cbus: cbus@c1100000 { - compatible = "simple-bus"; - reg = <0xc1100000 0x200000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0xc1100000 0x200000>; - - assist: assist@7c00 { - compatible = "amlogic,meson-mx-assist", "syscon"; - reg = <0x7c00 0x200>; - }; - - hwrng: rng@8100 { - compatible = "amlogic,meson-rng"; - reg = <0x8100 0x8>; - }; - - uart_A: serial@84c0 { - compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; - reg = <0x84c0 0x18>; - interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - }; - - uart_B: serial@84dc { - compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; - reg = <0x84dc 0x18>; - interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - }; - - i2c_A: i2c@8500 { - compatible = "amlogic,meson6-i2c"; - reg = <0x8500 0x20>; - interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - pwm_ab: pwm@8550 { - compatible = "amlogic,meson-pwm"; - reg = <0x8550 0x10>; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm_cd: pwm@8650 { - compatible = "amlogic,meson-pwm"; - reg = <0x8650 0x10>; - #pwm-cells = <3>; - status = "disabled"; - }; - - saradc: adc@8680 { - compatible = "amlogic,meson-saradc"; - reg = <0x8680 0x34>; - #io-channel-cells = <1>; - interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - }; - - uart_C: serial@8700 { - compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; - reg = <0x8700 0x18>; - interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - }; - - i2c_B: i2c@87c0 { - compatible = "amlogic,meson6-i2c"; - reg = <0x87c0 0x20>; - interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - usb0_phy: phy@8800 { - compatible = "amlogic,meson-mx-usb2-phy"; - #phy-cells = <0>; - reg = <0x8800 0x20>; - status = "disabled"; - }; - - usb1_phy: phy@8820 { - compatible = "amlogic,meson-mx-usb2-phy"; - #phy-cells = <0>; - reg = <0x8820 0x20>; - status = "disabled"; - }; - - sdio: mmc@8c20 { - compatible = "amlogic,meson-mx-sdio"; - reg = <0x8c20 0x20>; - interrupts = <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spifc: spi@8c80 { - compatible = "amlogic,meson6-spifc"; - reg = <0x8c80 0x80>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - gpio_intc: interrupt-controller@9880 { - compatible = "amlogic,meson-gpio-intc"; - reg = <0x9880 0x10>; - interrupt-controller; - #interrupt-cells = <2>; - amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; - status = "disabled"; - }; - - wdt: watchdog@9900 { - compatible = "amlogic,meson6-wdt"; - reg = <0x9900 0x8>; - interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; - }; - - timer_abcde: timer@9940 { - compatible = "amlogic,meson6-timer"; - reg = <0x9940 0x18>; - interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 11 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>; - }; - }; - - periph: bus@c4300000 { - compatible = "simple-bus"; - reg = <0xc4300000 0x10000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0xc4300000 0x10000>; - - gic: interrupt-controller@1000 { - compatible = "arm,cortex-a9-gic"; - reg = <0x1000 0x1000>, - <0x100 0x100>; - interrupt-controller; - #interrupt-cells = <3>; - }; - }; - - aobus: aobus@c8100000 { - compatible = "simple-bus"; - reg = <0xc8100000 0x100000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0xc8100000 0x100000>; - - ir_receiver: ir-receiver@480 { - compatible= "amlogic,meson6-ir"; - reg = <0x480 0x20>; - interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - }; - - uart_AO: serial@4c0 { - compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart"; - reg = <0x4c0 0x18>; - interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - }; - - i2c_AO: i2c@500 { - compatible = "amlogic,meson6-i2c"; - reg = <0x500 0x20>; - interrupts = <GIC_SPI 92 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - }; - - usb0: usb@c9040000 { - compatible = "snps,dwc2"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xc9040000 0x40000>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb0_phy>; - phy-names = "usb2-phy"; - dr_mode = "host"; - status = "disabled"; - }; - - usb1: usb@c90c0000 { - compatible = "snps,dwc2"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xc90c0000 0x40000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb1_phy>; - phy-names = "usb2-phy"; - dr_mode = "host"; - status = "disabled"; - }; - - ethmac: ethernet@c9410000 { - compatible = "amlogic,meson6-dwmac", "snps,dwmac"; - reg = <0xc9410000 0x10000 - 0xc1108108 0x4>; - interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "macirq"; - status = "disabled"; - }; - - ahb_sram: sram@d9000000 { - compatible = "mmio-sram"; - reg = <0xd9000000 0x20000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0xd9000000 0x20000>; - }; - - bootrom: bootrom@d9040000 { - compatible = "amlogic,meson-mx-bootrom", "syscon"; - reg = <0xd9040000 0x10000>; - }; - - secbus: secbus@da000000 { - compatible = "simple-bus"; - reg = <0xda000000 0x6000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0xda000000 0x6000>; - - efuse: nvmem@0 { - compatible = "amlogic,meson6-efuse"; - reg = <0x0 0x2000>; - #address-cells = <1>; - #size-cells = <1>; - }; - }; - }; -}; /* end of / */ |
