diff options
Diffstat (limited to 'arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi | 72 |
1 files changed, 14 insertions, 58 deletions
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi index a74cde050158..01f77142e153 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> @@ -56,7 +14,7 @@ backlight { compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = < 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 @@ -76,13 +34,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -96,21 +54,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -237,6 +195,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; #size-cells = <0>; adc { @@ -401,7 +360,6 @@ regulator-ramp-delay = <7000>; regulator-boot-on; regulator-always-on; - linux,phandle = <®_vdd_arm>; }; /* VDD_SOC (1+R1/R2 = 1.635) */ @@ -413,7 +371,6 @@ regulator-ramp-delay = <7000>; regulator-boot-on; regulator-always-on; - linux,phandle = <®_vdd_soc>; }; /* VDD_1P0 (1+R1/R2 = 1.38): */ @@ -486,7 +443,7 @@ display-timings { native-mode = <&timing0>; - timing0: g101evn010 { + timing0: timing-g101evn010 { clock-frequency = <68930000>; hactive = <1280>; vactive = <800>; @@ -502,7 +459,6 @@ }; &pwm1 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; @@ -681,7 +637,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { fsl,pins = < MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x4001b0b0 /* EMMY_EN */ MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x4001b0b0 /* EMMY_CFG1# */ @@ -711,7 +667,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 @@ -724,7 +680,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 @@ -753,7 +709,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 @@ -769,7 +725,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 |