diff options
Diffstat (limited to 'arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi | 22 |
1 files changed, 16 insertions, 6 deletions
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi index dc8298f6db34..ba29720e3f72 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/clock/imx6qdl-clock.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/media/video-interfaces.h> / { chosen { @@ -17,6 +18,13 @@ reg = <0x10000000 0x40000000>; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "reg-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_usb_otg_vbus: regulator-usb-otg-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg_vbus"; @@ -71,21 +79,21 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - power { + key-power { label = "Power Button"; gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; wakeup-source; linux,code = <KEY_POWER>; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; wakeup-source; linux,code = <KEY_VOLUMEUP>; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; wakeup-source; @@ -113,8 +121,8 @@ "DMICDAT", "DMIC"; mux-int-port = <2>; mux-ext-port = <3>; - hp-det-gpio = <&gpio7 8 GPIO_ACTIVE_LOW>; - mic-det-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>; + hp-det-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>; + mic-det-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; backlight_lvds: backlight-lvds { @@ -139,6 +147,7 @@ panel { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds>; + power-supply = <®_3v3>; port { panel_in: endpoint { @@ -278,7 +287,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ov5642>; clocks = <&clks IMX6QDL_CLK_CKO>; - clock-names = "xclk"; reg = <0x3c>; DOVDD-supply = <&vgen4_reg>; /* 1.8v */ AVDD-supply = <&vgen3_reg>; /* 2.8v, rev C board is VGEN3 @@ -291,6 +299,7 @@ port { ov5642_to_ipu1_csi0_mux: endpoint { remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-type = <MEDIA_BUS_TYPE_PARALLEL>; bus-width = <8>; hsync-active = <1>; vsync-active = <1>; @@ -804,6 +813,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; + dr_mode = "otg"; status = "okay"; }; |