diff options
Diffstat (limited to 'arch/arm/boot/dts/nxp/imx/imx7s-warp.dts')
| -rw-r--r-- | arch/arm/boot/dts/nxp/imx/imx7s-warp.dts | 55 |
1 files changed, 32 insertions, 23 deletions
diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts index ba7231b364bb..92b6258059ee 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts @@ -23,7 +23,7 @@ pinctrl-0 = <&pinctrl_gpio>; autorepeat; - back { + key-back { label = "Back"; gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; linux,code = <KEY_BACK>; @@ -31,28 +31,11 @@ }; }; - reg_brcm: regulator-brcm { + reg_3v3: regulator-3v3 { compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_brcm_reg>; - regulator-name = "brcm_reg"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <200000>; - }; - - reg_bt: regulator-bt { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_bt_reg>; - enable-active-high; - gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>; - regulator-name = "bt_reg"; + regulator-name = "3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-always-on; }; reg_peri_3p15v: regulator-peri-3p15v { @@ -63,6 +46,14 @@ regulator-always-on; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_brcm_reg>; + post-power-on-delay-ms = <200>; + reset-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "imx7-sgtl5000"; @@ -210,6 +201,7 @@ remote-endpoint = <&mipi_from_sensor>; clock-lanes = <0>; data-lanes = <1>; + link-frequencies = /bits/ 64 <330000000>; }; }; }; @@ -243,6 +235,8 @@ mpl3115@60 { compatible = "fsl,mpl3115"; reg = <0x60>; + vdd-supply = <®_3v3>; + vddio-supply = <®_3v3>; }; }; @@ -287,6 +281,14 @@ assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt_reg>; + shutdown-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; + max-speed = <3000000>; + }; }; &uart6 { @@ -304,14 +306,21 @@ }; &usdhc1 { + #address-cells = <1>; + #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; bus-width = <4>; keep-power-in-suspend; no-1-8-v; non-removable; - vmmc-supply = <®_brcm>; + mmc-pwrseq = <&sdio_pwrseq>; status = "okay"; + + wifi@0 { + compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac"; + reg = <0>; + }; }; &usdhc3 { @@ -458,7 +467,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x5a MX7D_PAD_SD3_CLK__SD3_CLK 0x1a @@ -474,7 +483,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x5b MX7D_PAD_SD3_CLK__SD3_CLK 0x1b |