1 files changed, 0 insertions, 165 deletions
diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts
deleted file mode 100644
index 33ffabe9c4c8..000000000000
--- a/arch/arm/boot/dts/pm9g45.dts
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * pm9g45.dts - Device Tree file for Ronetix pm9g45 board
- *
- *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
- */
-/dts-v1/;
-#include "at91sam9g45.dtsi"
-
-/ {
-	model = "Ronetix pm9g45";
-	compatible = "ronetix,pm9g45", "atmel,at91sam9g45", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		reg = <0x70000000 0x8000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			dbgu: serial@ffffee00 {
-				status = "okay";
-			};
-
-			pinctrl@fffff200 {
-
-				board {
-					pinctrl_board_nand: nand0-board {
-						atmel,pins =
-							<AT91_PIOD 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP	/* PD3 gpio RDY pin pull_up*/
-							 AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PC14 gpio enable pin pull_up */
-					};
-				};
-
-				mmc {
-					pinctrl_board_mmc: mmc0-board {
-						atmel,pins =
-							<AT91_PIOD 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD6 gpio CD pin pull_up and deglitch */
-					};
-				};
-			};
-
-			mmc0: mmc@fff80000 {
-				pinctrl-0 = <
-					&pinctrl_board_mmc
-					&pinctrl_mmc0_slot0_clk_cmd_dat0
-					&pinctrl_mmc0_slot0_dat1_3>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioD 6 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			macb0: ethernet@fffbc000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-		};
-
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt;
-			pinctrl-0 = <&pinctrl_board_nand>;
-
-			gpios = <&pioD 3 GPIO_ACTIVE_HIGH
-				 &pioC 14 GPIO_ACTIVE_HIGH
-				 0
-				>;
-
-			status = "okay";
-
-			at91bootstrap@0 {
-				label = "at91bootstrap";
-				reg = <0x0 0x20000>;
-			};
-
-			barebox@20000 {
-				label = "barebox";
-				reg = <0x20000 0x40000>;
-			};
-
-			bareboxenv@60000 {
-				label = "bareboxenv";
-				reg = <0x60000 0x1A0000>;
-			};
-
-			kernel@200000 {
-				label = "bareboxenv2";
-				reg = <0x200000 0x300000>;
-			};
-
-			kernel@500000 {
-				label = "root";
-				reg = <0x500000 0x400000>;
-			};
-
-			data@900000 {
-				label = "data";
-				reg = <0x900000 0x8340000>;
-			};
-		};
-
-		usb0: ohci@00700000 {
-			status = "okay";
-			num-ports = <2>;
-		};
-
-		usb1: ehci@00800000 {
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led0 {
-			label = "led0";
-			gpios = <&pioD 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "nand-disk";
-		};
-
-		led1 {
-			label = "led1";
-			gpios = <&pioD 31 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		right {
-			label = "SW4";
-			gpios = <&pioE 7 GPIO_ACTIVE_LOW>;
-			linux,code = <106>;
-		};
-
-		up {
-			label = "SW3";
-			gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
-			linux,code = <103>;
-		};
-	};
-};