1 files changed, 38 insertions, 6 deletions
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
index 60bdfddeae69..b3127f0383cf 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
@@ -12,6 +12,7 @@
 	chassis-type = "handset";
 
 	aliases {
+		mmc0 = &sdhc_1;
 		serial0 = &blsp1_uart1;
 		serial1 = &blsp2_uart4;
 	};
@@ -60,6 +61,33 @@
 		enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
 	};
 
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+
 	vreg_wlan: wlan-regulator {
 		compatible = "regulator-fixed";
 
@@ -140,7 +168,7 @@
 	status = "okay";
 	clock-frequency = <100000>;
 
-	avago_apds993@39 {
+	sensor@39 {
 		compatible = "avago,apds9930";
 		reg = <0x39>;
 		interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
@@ -155,7 +183,7 @@
 	status = "okay";
 	clock-frequency = <355000>;
 
-	led-controller@38 {
+	backlight: led-controller@38 {
 		compatible = "ti,lm3630a";
 		status = "okay";
 		reg = <0x38>;
@@ -245,6 +273,8 @@
 		reg = <0>;
 		compatible = "lg,acx467akm-7";
 
+		backlight = <&backlight>;
+
 		pinctrl-names = "default";
 		pinctrl-0 = <&panel_pin>;
 
@@ -301,7 +331,7 @@
 		power-source = <PM8941_GPIO_S3>;
 	};
 
-	otg {
+	otg-hog {
 		gpio-hog;
 		gpios = <35 GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -340,6 +370,7 @@
 
 &remoteproc_adsp {
 	cx-supply = <&pm8841_s2>;
+	status = "okay";
 };
 
 &remoteproc_mss {
@@ -347,6 +378,7 @@
 	mss-supply = <&pm8841_s3>;
 	mx-supply = <&pm8841_s1>;
 	pll-supply = <&pm8941_l12>;
+	status = "okay";
 };
 
 &rpm_requests {
@@ -567,7 +599,7 @@
 	pinctrl-0 = <&sdc2_on>;
 	pinctrl-1 = <&sdc2_off>;
 
-	bcrmf@1 {
+	wifi@1 {
 		compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
 		reg = <1>;