diff options
Diffstat (limited to 'arch/arm/boot/dts/renesas/r8a7790-lager.dts')
| -rw-r--r-- | arch/arm/boot/dts/renesas/r8a7790-lager.dts | 55 |
1 files changed, 31 insertions, 24 deletions
diff --git a/arch/arm/boot/dts/renesas/r8a7790-lager.dts b/arch/arm/boot/dts/renesas/r8a7790-lager.dts index 5ad5349a50dc..4f002aa7fbaf 100644 --- a/arch/arm/boot/dts/renesas/r8a7790-lager.dts +++ b/arch/arm/boot/dts/renesas/r8a7790-lager.dts @@ -73,39 +73,34 @@ reg = <1 0x40000000 0 0xc0000000>; }; - lbsc { - #address-cells = <1>; - #size-cells = <1>; - }; - keyboard { compatible = "gpio-keys"; pinctrl-0 = <&keyboard_pins>; pinctrl-names = "default"; - one { + key-1 { linux,code = <KEY_1>; label = "SW2-1"; wakeup-source; debounce-interval = <20>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; - two { + key-2 { linux,code = <KEY_2>; label = "SW2-2"; wakeup-source; debounce-interval = <20>; gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; }; - three { + key-3 { linux,code = <KEY_3>; label = "SW2-3"; wakeup-source; debounce-interval = <20>; gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; }; - four { + key-4 { linux,code = <KEY_4>; label = "SW2-4"; wakeup-source; @@ -127,6 +122,15 @@ }; }; + fixedregulator1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + fixedregulator3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; @@ -308,7 +312,7 @@ * * IIC0/I2C0 does not appear to support fallback to GPIO. */ - i2cexio0: i2c-10 { + i2cexio0: i2c-mux1 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&iic0>, <&i2c0>; i2c-bus-name = "i2c-exio0"; @@ -321,7 +325,7 @@ * This is similar to the arangement described for i2cexio0 (above) * with a fallback to GPIO also provided. */ - i2cexio1: i2c-11 { + i2cexio1: i2c-mux2 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>; i2c-bus-name = "i2c-exio1"; @@ -333,7 +337,7 @@ * IIC2 and I2C2 may be switched using pinmux. * A fallback to GPIO is also provided. */ - i2chdmi: i2c-12 { + i2chdmi: i2c-mux3 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>; i2c-bus-name = "i2c-hdmi"; @@ -361,11 +365,16 @@ hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; - interrupt-parent = <&gpio1>; - interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio1 15 IRQ_TYPE_LEVEL_LOW>; clocks = <&cec_clock>; clock-names = "cec"; + avdd-supply = <&fixedregulator1v8>; + dvdd-supply = <&fixedregulator1v8>; + pvdd-supply = <&fixedregulator1v8>; + dvdd-3v-supply = <&fixedregulator3v3>; + bgvdd-supply = <&fixedregulator1v8>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; @@ -393,8 +402,7 @@ hdmi-in@4c { compatible = "adi,adv7612"; reg = <0x4c>; - interrupt-parent = <&gpio1>; - interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio1 20 IRQ_TYPE_LEVEL_LOW>; default-input = <0>; ports { @@ -422,7 +430,7 @@ * IIC3 and I2C3 may be switched using pinmux. * IIC3/I2C3 does not appear to support fallback to GPIO. */ - i2cpwr: i2c-13 { + i2cpwr: i2c-mux4 { compatible = "i2c-demux-pinctrl"; pinctrl-names = "default"; pinctrl-0 = <&pmic_irq_pins>; @@ -434,9 +442,9 @@ pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; rtc { compatible = "dlg,da9063-rtc"; @@ -450,8 +458,7 @@ vdd_dvfs: regulator@68 { compatible = "dlg,da9210"; reg = <0x68>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -681,8 +688,7 @@ compatible = "ethernet-phy-id0022.1537", "ethernet-phy-ieee802.3-c22"; reg = <1>; - interrupt-parent = <&irqc0>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>; }; @@ -748,6 +754,7 @@ &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; + bootph-all; status = "okay"; }; @@ -879,7 +886,7 @@ status = "okay"; pinctrl-0 = <&hsusb_pins>; pinctrl-names = "default"; - renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>; + renesas,enable-gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; }; &usbphy { |