diff options
Diffstat (limited to 'arch/arm/boot/dts/renesas/r8a7791-koelsch.dts')
| -rw-r--r-- | arch/arm/boot/dts/renesas/r8a7791-koelsch.dts | 88 |
1 files changed, 63 insertions, 25 deletions
diff --git a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts index 26a40782cc89..61ea438eb6af 100644 --- a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts @@ -73,11 +73,6 @@ reg = <2 0x00000000 0 0x40000000>; }; - lbsc { - #address-cells = <1>; - #size-cells = <1>; - }; - keyboard { compatible = "gpio-keys"; @@ -179,6 +174,24 @@ }; }; + reg_1p8v: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; @@ -288,6 +301,16 @@ clock-frequency = <12000000>; }; + composite-in { + compatible = "composite-video-connector"; + + port { + composite_con_in: endpoint { + remote-endpoint = <&adv7180_in>; + }; + }; + }; + hdmi-out { compatible = "hdmi-connector"; type = "a"; @@ -345,7 +368,7 @@ * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA). * A fallback to GPIO is provided. */ - i2cexio1: i2c-12 { + i2cexio1: i2c-mux1 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&i2c1>, <&gpioi2c1>; i2c-bus-name = "i2c-exio1"; @@ -356,7 +379,7 @@ /* * A fallback to GPIO is provided for I2C2. */ - i2chdmi: i2c-13 { + i2chdmi: i2c-mux2 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&i2c2>, <&gpioi2c2>; i2c-bus-name = "i2c-hdmi"; @@ -370,13 +393,25 @@ }; composite-in@20 { - compatible = "adi,adv7180"; + compatible = "adi,adv7180cp"; reg = <0x20>; - port { - adv7180: endpoint { - bus-width = <8>; - remote-endpoint = <&vin1ep>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7180_in: endpoint { + remote-endpoint = <&composite_con_in>; + }; + }; + + port@3 { + reg = <3>; + adv7180_out: endpoint { + remote-endpoint = <&vin1ep>; + }; }; }; }; @@ -384,11 +419,16 @@ hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; - interrupt-parent = <&gpio3>; - interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio3 29 IRQ_TYPE_LEVEL_LOW>; clocks = <&cec_clock>; clock-names = "cec"; + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + dvdd-3v-supply = <®_3p3v>; + bgvdd-supply = <®_1p8v>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; @@ -416,8 +456,7 @@ hdmi-in@4c { compatible = "adi,adv7612"; reg = <0x4c>; - interrupt-parent = <&gpio4>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio4 2 IRQ_TYPE_LEVEL_LOW>; default-input = <0>; ports { @@ -451,7 +490,7 @@ * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA). * A fallback to GPIO is provided. */ - i2cexio4: i2c-14 { + i2cexio4: i2c-mux3 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&i2c4>, <&gpioi2c4>; i2c-bus-name = "i2c-exio4"; @@ -640,8 +679,7 @@ compatible = "ethernet-phy-id0022.1537", "ethernet-phy-ieee802.3-c22"; reg = <1>; - interrupt-parent = <&irqc0>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; }; @@ -663,6 +701,7 @@ &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; + bootph-all; status = "okay"; }; @@ -797,9 +836,9 @@ pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; rtc { compatible = "dlg,da9063-rtc"; @@ -813,8 +852,7 @@ vdd_dvfs: regulator@68 { compatible = "dlg,da9210"; reg = <0x68>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -839,7 +877,7 @@ status = "okay"; pinctrl-0 = <&usb0_pins>; pinctrl-names = "default"; - renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>; + renesas,enable-gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; }; &usbphy { @@ -884,7 +922,7 @@ port { vin1ep: endpoint { - remote-endpoint = <&adv7180>; + remote-endpoint = <&adv7180_out>; bus-width = <8>; }; }; |