diff options
Diffstat (limited to 'arch/arm/boot/dts/renesas/r8a7793-gose.dts')
| -rw-r--r-- | arch/arm/boot/dts/renesas/r8a7793-gose.dts | 46 |
1 files changed, 33 insertions, 13 deletions
diff --git a/arch/arm/boot/dts/renesas/r8a7793-gose.dts b/arch/arm/boot/dts/renesas/r8a7793-gose.dts index 79b537b24642..5c6928c941ac 100644 --- a/arch/arm/boot/dts/renesas/r8a7793-gose.dts +++ b/arch/arm/boot/dts/renesas/r8a7793-gose.dts @@ -165,6 +165,24 @@ }; }; + reg_1p8v: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; @@ -324,7 +342,7 @@ /* * A fallback to GPIO is provided for I2C2. */ - i2chdmi: i2c-11 { + i2chdmi: i2c-mux1 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&i2c2>, <&gpioi2c2>; i2c-bus-name = "i2c-hdmi"; @@ -355,7 +373,6 @@ port@3 { reg = <3>; adv7180_out: endpoint { - bus-width = <8>; remote-endpoint = <&vin1ep>; }; }; @@ -365,8 +382,13 @@ hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; - interrupt-parent = <&gpio3>; - interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio3 29 IRQ_TYPE_LEVEL_LOW>; + + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + dvdd-3v-supply = <®_3p3v>; + bgvdd-supply = <®_1p8v>; adi,input-depth = <8>; adi,input-colorspace = "rgb"; @@ -395,8 +417,7 @@ hdmi-in@4c { compatible = "adi,adv7612"; reg = <0x4c>; - interrupt-parent = <&gpio4>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio4 2 IRQ_TYPE_LEVEL_LOW>; default-input = <0>; ports { @@ -430,7 +451,7 @@ * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA). * A fallback to GPIO is provided. */ - i2cexio4: i2c-12 { + i2cexio4: i2c-mux2 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&i2c4>, <&gpioi2c4>; i2c-bus-name = "i2c-exio4"; @@ -598,8 +619,7 @@ compatible = "ethernet-phy-id0022.1537", "ethernet-phy-ieee802.3-c22"; reg = <1>; - interrupt-parent = <&irqc0>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; }; @@ -621,6 +641,7 @@ &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; + bootph-all; status = "okay"; }; @@ -732,9 +753,9 @@ pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; rtc { compatible = "dlg,da9063-rtc"; @@ -748,8 +769,7 @@ vdd_dvfs: regulator@68 { compatible = "dlg,da9210"; reg = <0x68>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; |