diff options
Diffstat (limited to 'arch/arm/boot/dts/rk3229-evb.dts')
| -rw-r--r-- | arch/arm/boot/dts/rk3229-evb.dts | 164 |
1 files changed, 0 insertions, 164 deletions
diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts deleted file mode 100644 index 1b55192b7d04..000000000000 --- a/arch/arm/boot/dts/rk3229-evb.dts +++ /dev/null @@ -1,164 +0,0 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; - -#include "rk322x.dtsi" - -/ { - model = "Rockchip RK3229 Evaluation board"; - compatible = "rockchip,rk3229-evb", "rockchip,rk3229"; - - memory@60000000 { - device_type = "memory"; - reg = <0x60000000 0x40000000>; - }; - - ext_gmac: ext_gmac { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "ext_gmac"; - #clock-cells = <0>; - }; - - vcc_host: vcc-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&host_vbus_drv>; - regulator-name = "vcc_host"; - regulator-always-on; - regulator-boot-on; - }; - - vcc_phy: vcc-phy-regulator { - compatible = "regulator-fixed"; - enable-active-high; - regulator-name = "vcc_phy"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; -}; - -&gmac { - assigned-clocks = <&cru SCLK_MAC_EXTCLK>, <&cru SCLK_MAC>; - assigned-clock-parents = <&ext_gmac>, <&cru SCLK_MAC_EXTCLK>; - clock_in_out = "input"; - phy-supply = <&vcc_phy>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 1000000>; - tx_delay = <0x30>; - rx_delay = <0x10>; - status = "okay"; -}; - -&pinctrl { - usb { - host_vbus_drv: host-vbus-drv { - rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&uart2 { - status = "okay"; -}; - -&u2phy0 { - status = "okay"; - - u2phy0_otg: otg-port { - status = "okay"; - }; - - u2phy0_host: host-port { - phy-supply = <&vcc_host>; - status = "okay"; - }; -}; - -&u2phy1 { - status = "okay"; - - u2phy1_otg: otg-port { - phy-supply = <&vcc_host>; - status = "okay"; - }; - - u2phy1_host: host-port { - phy-supply = <&vcc_host>; - status = "okay"; - }; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usb_host2_ehci { - status = "okay"; -}; - -&usb_host2_ohci { - status = "okay"; -}; - -&usb_otg { - status = "okay"; -}; |