summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/sama5d3xmb_cmp.dtsi')
-rw-r--r--arch/arm/boot/dts/sama5d3xmb_cmp.dtsi301
1 files changed, 0 insertions, 301 deletions
diff --git a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
deleted file mode 100644
index 252e0d35f846..000000000000
--- a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
+++ /dev/null
@@ -1,301 +0,0 @@
-/*
- * sama5d3xmb_cmp.dts - Device Tree file for SAMA5D3x CMP mother board
- *
- * Copyright (C) 2016 Atmel,
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-#include "sama5d3xcm_cmp.dtsi"
-
-/ {
- compatible = "atmel,sama5d3xmb-cmp", "atmel,sama5d3xcm-cmp", "atmel,sama5d3", "atmel,sama5";
-
- ahb {
- apb {
- mmc0: mmc@f0000000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
- status = "okay";
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
- };
- };
-
- spi0: spi@f0004000 {
- dmas = <0>, <0>; /* Do not use DMA for spi0 */
-
- m25p80@0 {
- compatible = "atmel,at25df321a";
- spi-max-frequency = <50000000>;
- reg = <0>;
- };
- };
-
- ssc0: ssc@f0008000 {
- atmel,clk-from-rk-pin;
- };
-
- /*
- * i2c0 conflicts with ISI:
- * disable it to allow the use of ISI
- * can not enable audio when i2c0 disabled
- */
- i2c0: i2c@f0014000 {
- wm8904: wm8904@1a {
- compatible = "wlf,wm8904";
- reg = <0x1a>;
- clocks = <&pck0>;
- clock-names = "mclk";
- };
- };
-
- i2c1: i2c@f0018000 {
- ov2640: camera@0x30 {
- compatible = "ovti,ov2640";
- reg = <0x30>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
- resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
- pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
- /* use pck1 for the master clock of ov2640 */
- clocks = <&pck1>;
- clock-names = "xvclk";
- assigned-clocks = <&pck1>;
- assigned-clock-rates = <25000000>;
-
- port {
- ov2640_0: endpoint {
- remote-endpoint = <&isi_0>;
- bus-width = <8>;
- };
- };
- };
- };
-
- usart1: serial@f0020000 {
- dmas = <0>, <0>; /* Do not use DMA for usart1 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
- status = "okay";
- };
-
- isi: isi@f0034000 {
- port {
- isi_0: endpoint {
- remote-endpoint = <&ov2640_0>;
- bus-width = <8>;
- vsync-active = <1>;
- hsync-active = <1>;
- };
- };
- };
-
- mmc1: mmc@f8000000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
- status = "okay";
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>;
- };
- };
-
- adc0: adc@f8018000 {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <
- &pinctrl_adc0_adtrg
- &pinctrl_adc0_ad0
- &pinctrl_adc0_ad1
- &pinctrl_adc0_ad2
- &pinctrl_adc0_ad3
- &pinctrl_adc0_ad4
- >;
- pinctrl-1 = <
- &pinctrl_adc0_adtrg_sleep
- &pinctrl_adc0_ad0_sleep
- &pinctrl_adc0_ad1_sleep
- &pinctrl_adc0_ad2_sleep
- &pinctrl_adc0_ad3_sleep
- &pinctrl_adc0_ad4_sleep
- >;
- status = "okay";
- };
-
- macb1: ethernet@f802c000 {
- phy-mode = "rmii";
-
- #address-cells = <1>;
- #size-cells = <0>;
- phy0: ethernet-phy@1 {
- /*interrupt-parent = <&pioE>;*/
- /*interrupts = <30 IRQ_TYPE_EDGE_FALLING>;*/
- reg = <1>;
- };
- };
-
- pinctrl@fffff200 {
- adc0 {
- pinctrl_adc0_adtrg_sleep: adc0_adtrg_1 {
- atmel,pins =
- <AT91_PIOD 19 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
- };
- pinctrl_adc0_ad0_sleep: adc0_ad0_1 {
- atmel,pins =
- <AT91_PIOD 20 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
- };
- pinctrl_adc0_ad1_sleep: adc0_ad1_1 {
- atmel,pins =
- <AT91_PIOD 21 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
- };
- pinctrl_adc0_ad2_sleep: adc0_ad2_1 {
- atmel,pins =
- <AT91_PIOD 22 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
- };
- pinctrl_adc0_ad3_sleep: adc0_ad3_1 {
- atmel,pins =
- <AT91_PIOD 23 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
- };
- pinctrl_adc0_ad4_sleep: adc0_ad4_1 {
- atmel,pins =
- <AT91_PIOD 24 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
- };
- };
-
- board {
- pinctrl_gpio_keys: gpio_keys {
- atmel,pins =
- <AT91_PIOE 27 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
- };
-
- pinctrl_mmc0_cd: mmc0_cd {
- atmel,pins =
- <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
- };
-
- pinctrl_mmc1_cd: mmc1_cd {
- atmel,pins =
- <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
- };
-
- pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
- atmel,pins =
- <AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
- };
-
- pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
- atmel,pins =
- <AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
- };
-
- pinctrl_sensor_reset: sensor_reset-0 {
- atmel,pins =
- <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
- };
-
- pinctrl_sensor_power: sensor_power-0 {
- atmel,pins =
- <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
- };
-
- pinctrl_usba_vbus: usba_vbus {
- atmel,pins =
- <AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
- };
- };
- };
-
- dbgu: serial@ffffee00 {
- dmas = <0>, <0>; /* Do not use DMA for dbgu */
- status = "okay";
- };
-
- watchdog@fffffe40 {
- status = "okay";
- };
- };
-
- usb0: gadget@00500000 {
- atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usba_vbus>;
- status = "okay";
- };
- };
-
- sound {
- compatible = "atmel,asoc-wm8904";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
-
- atmel,model = "wm8904 @ SAMA5D3EK";
- atmel,audio-routing =
- "Headphone Jack", "HPOUTL",
- "Headphone Jack", "HPOUTR",
- "IN2L", "Line In Jack",
- "IN2R", "Line In Jack",
- "Mic", "MICBIAS",
- "IN1L", "Mic";
-
- atmel,ssc-controller = <&ssc0>;
- atmel,audio-codec = <&wm8904>;
-
- status = "disabled";
- };
-
- /* Conflict with LCD pins */
- gpio_keys {
- compatible = "gpio-keys";
- status = "okay";
-
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio_keys>;
-
- pb_user1 {
- label = "pb_user1";
- gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
- linux,code = <0x100>;
- wakeup-source;
- };
- };
-};
generated by cgit (git 2.34.1) at 2026-01-03 16:34:16 +0000