diff options
Diffstat (limited to 'arch/arm/boot/dts/spear1340.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/spear1340.dtsi | 146 |
1 files changed, 0 insertions, 146 deletions
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi deleted file mode 100644 index 54d128d35681..000000000000 --- a/arch/arm/boot/dts/spear1340.dtsi +++ /dev/null @@ -1,146 +0,0 @@ -/* - * DTS file for all SPEAr1340 SoCs - * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/include/ "spear13xx.dtsi" - -/ { - compatible = "st,spear1340"; - - ahb { - - spics: spics@e0700000{ - compatible = "st,spear-spics-gpio"; - reg = <0xe0700000 0x1000>; - st-spics,peripcfg-reg = <0x42c>; - st-spics,sw-enable-bit = <21>; - st-spics,cs-value-bit = <20>; - st-spics,cs-enable-mask = <3>; - st-spics,cs-enable-shift = <18>; - gpio-controller; - #gpio-cells = <2>; - status = "disabled"; - }; - - ahci@b1000000 { - compatible = "snps,spear-ahci"; - reg = <0xb1000000 0x10000>; - interrupts = <0 72 0x4>; - status = "disabled"; - }; - - i2s-play@b2400000 { - compatible = "snps,designware-i2s"; - reg = <0xb2400000 0x10000>; - interrupt-names = "play_irq"; - interrupts = <0 98 0x4 - 0 99 0x4>; - play; - channel = <8>; - status = "disabled"; - }; - - i2s-rec@b2000000 { - compatible = "snps,designware-i2s"; - reg = <0xb2000000 0x10000>; - interrupt-names = "record_irq"; - interrupts = <0 100 0x4 - 0 101 0x4>; - record; - channel = <8>; - status = "disabled"; - }; - - pinmux: pinmux@e0700000 { - compatible = "st,spear1340-pinmux"; - reg = <0xe0700000 0x1000>; - #gpio-range-cells = <3>; - }; - - pwm: pwm@e0180000 { - compatible ="st,spear13xx-pwm"; - reg = <0xe0180000 0x1000>; - #pwm-cells = <2>; - status = "disabled"; - }; - - spdif-in@d0100000 { - compatible = "st,spdif-in"; - reg = < 0xd0100000 0x20000 - 0xd0110000 0x10000 >; - interrupts = <0 84 0x4>; - status = "disabled"; - }; - - spdif-out@d0000000 { - compatible = "st,spdif-out"; - reg = <0xd0000000 0x20000>; - interrupts = <0 85 0x4>; - status = "disabled"; - }; - - spi1: spi@5d400000 { - compatible = "arm,pl022", "arm,primecell"; - reg = <0x5d400000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 99 0x4>; - status = "disabled"; - }; - - apb { - i2c1: i2c@b4000000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,designware-i2c"; - reg = <0xb4000000 0x1000>; - interrupts = <0 104 0x4>; - write-16bit; - status = "disabled"; - }; - - serial@b4100000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0xb4100000 0x1000>; - interrupts = <0 105 0x4>; - status = "disabled"; - dmas = <&dwdma0 0x600 0 0 1>, /* 0xC << 11 */ - <&dwdma0 0x680 0 1 0>; /* 0xD << 7 */ - dma-names = "tx", "rx"; - }; - - thermal@e07008c4 { - st,thermal-flags = <0x2a00>; - }; - - gpiopinctrl: gpio@e2800000 { - compatible = "st,spear-plgpio"; - reg = <0xe2800000 0x1000>; - interrupts = <0 107 0x4>; - #interrupt-cells = <1>; - interrupt-controller; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pinmux 0 0 252>; - status = "disabled"; - - st-plgpio,ngpio = <250>; - st-plgpio,wdata-reg = <0x40>; - st-plgpio,dir-reg = <0x00>; - st-plgpio,ie-reg = <0x80>; - st-plgpio,rdata-reg = <0x20>; - st-plgpio,mis-reg = <0xa0>; - st-plgpio,eit-reg = <0x60>; - }; - }; - }; -}; |
