1 files changed, 0 insertions, 105 deletions
diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts
deleted file mode 100644
index 16c3888b7b15..000000000000
--- a/arch/arm/boot/dts/ste-nomadik-s8815.dts
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Device Tree for the ST-Ericsson Nomadik S8815 board
- * Produced by Calao Systems
- */
-
-/dts-v1/;
-/include/ "ste-nomadik-stn8815.dtsi"
-
-/ {
-	model = "Calao Systems USB-S8815";
-	compatible = "calaosystems,usb-s8815";
-
-	chosen {
-		bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
-	};
-
-	/* This is where the interrupt is routed on the S8815 board */
-	external-bus@34000000 {
-		ethernet@300 {
-			interrupt-parent = <&gpio3>;
-			interrupts = <8 0x1>;
-		};
-	};
-
-	src@101e0000 {
-		/* These chrystal drivers are not used on this board */
-		disable-sxtalo;
-		disable-mxtalo;
-	};
-
-	pinctrl {
-		/* Hog CD pins */
-		pinctrl-names = "default";
-		pinctrl-0 = <&cd_default_mode>;
-
-		mmcsd-cd {
-			cd_default_mode: cd_default {
-				cd_default_cfg1 {
-					/* CD input GPIO */
-					ste,pins = "GPIO111_H21";
-					ste,input = <0>;
-				};
-				cd_default_cfg2 {
-					/* CD GPIO biasing */
-					ste,pins = "GPIO112_J21";
-					ste,output = <0>;
-				};
-			};
-		};
-		user-led {
-			user_led_default_mode: user_led_default {
-				user_led_default_cfg {
-					ste,pins = "GPIO2_C5";
-					ste,output = <1>;
-				};
-			};
-		};
-		user-button {
-			user_button_default_mode: user_button_default {
-				user_button_default_cfg {
-					ste,pins = "GPIO3_A4";
-					ste,input = <0>;
-				};
-			};
-		};
-	};
-
-	/* Custom board node with GPIO pins to active etc */
-	usb-s8815 {
-		/* The S8815 is using this very GPIO pin for the SMSC91x IRQs */
-		ethernet-gpio {
-			gpios = <&gpio3 8 0x1>;
-		};
-		/* This will bias the MMC/SD card detect line */
-		mmcsd-gpio {
-			gpios = <&gpio3 16 0x1>;
-		};
-	};
-
-	/* The user LED on the board is set up to be used for heartbeat */
-	leds {
-		compatible = "gpio-leds";
-		user-led {
-			label = "user_led";
-			gpios = <&gpio0 2 0x1>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-			pinctrl-names = "default";
-			pinctrl-0 = <&user_led_default_mode>;
-		};
-	};
-
-	/* User key mapped in as "escape" */
-	gpio-keys {
-		compatible = "gpio-keys";
-		user-button {
-			label = "user_button";
-			gpios = <&gpio0 3 0x1>;
-			linux,code = <1>; /* KEY_ESC */
-			gpio-key,wakeup;
-			pinctrl-names = "default";
-			pinctrl-0 = <&user_button_default_mode>;
-		};
-	};
-};