diff options
Diffstat (limited to 'arch/arm/boot/dts/stm32mp151a-prtt1c.dts')
| -rw-r--r-- | arch/arm/boot/dts/stm32mp151a-prtt1c.dts | 304 |
1 files changed, 0 insertions, 304 deletions
diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1c.dts b/arch/arm/boot/dts/stm32mp151a-prtt1c.dts deleted file mode 100644 index 7ecf31263abc..000000000000 --- a/arch/arm/boot/dts/stm32mp151a-prtt1c.dts +++ /dev/null @@ -1,304 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) Protonic Holland - * Author: David Jander <david@protonic.nl> - */ -/dts-v1/; - -#include "stm32mp151a-prtt1l.dtsi" - -/ { - model = "Protonic PRTT1C"; - compatible = "prt,prtt1c", "st,stm32mp151"; - - clock_ksz9031: clock-ksz9031 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - clock_sja1105: clock-sja1105 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - mdio0: mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - gpios = <&gpioc 1 GPIO_ACTIVE_HIGH - &gpioa 2 GPIO_ACTIVE_HIGH>; - - }; - - wifi_pwrseq: wifi-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpiod 8 GPIO_ACTIVE_LOW>; - }; -}; - -ðernet0 { - fixed-link { - speed = <100>; - full-duplex; - }; -}; - -&gpioa { - gpio-line-names = - "", "", "", "PHY0_nRESET", "PHY0_nINT", "", "", "", - "", "", "", "", "", "", "", "SPI1_nSS"; -}; - -&gpiod { - gpio-line-names = - "", "", "", "", "", "", "", "", - "WFM_RESET", "", "", "", "", "", "", ""; -}; - -&gpioe { - gpio-line-names = - "SDMMC2_nRESET", "", "", "", "", "", "SPI1_nRESET", "", - "", "", "", "", "WFM_nIRQ", "", "", ""; -}; - -&gpiog { - gpio-line-names = - "", "", "", "", "", "", "", "PHY3_nINT", - "PHY1_nINT", "PHY3_nRESET", "PHY2_nINT", "PHY2_nRESET", - "PHY1_nRESET", "SPE1_PWR", "SPE0_PWR", ""; -}; - -&mdio0 { - /* All this DP83TD510E PHYs can't be probed before switch@0 is - * probed so we need to use compatible with PHYid - */ - /* TI DP83TD510E */ - t1l0_phy: ethernet-phy@6 { - compatible = "ethernet-phy-id2000.0181"; - reg = <6>; - interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>; - reset-assert-us = <10>; - reset-deassert-us = <35>; - }; - - /* TI DP83TD510E */ - t1l1_phy: ethernet-phy@7 { - compatible = "ethernet-phy-id2000.0181"; - reg = <7>; - interrupts-extended = <&gpiog 8 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpiog 12 GPIO_ACTIVE_LOW>; - reset-assert-us = <10>; - reset-deassert-us = <35>; - }; - - /* TI DP83TD510E */ - t1l2_phy: ethernet-phy@10 { - compatible = "ethernet-phy-id2000.0181"; - reg = <10>; - interrupts-extended = <&gpiog 10 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpiog 11 GPIO_ACTIVE_LOW>; - reset-assert-us = <10>; - reset-deassert-us = <35>; - }; - - /* Micrel KSZ9031 */ - rj45_phy: ethernet-phy@2 { - reg = <2>; - interrupts-extended = <&gpiog 7 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <1000>; - - clocks = <&clock_ksz9031>; - }; -}; - -&qspi { - status = "disabled"; -}; - -&sdmmc2 { - pinctrl-names = "default", "opendrain", "sleep"; - pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; - pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>; - pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>; - non-removable; - no-sd; - no-sdio; - no-1-8-v; - st,neg-edge; - bus-width = <8>; - vmmc-supply = <®_3v3>; - vqmmc-supply = <®_3v3>; - status = "okay"; -}; - -&sdmmc2_b4_od_pins_a { - pins1 { - pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ - <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */ - <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ - <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */ - }; -}; - -&sdmmc2_b4_pins_a { - pins1 { - pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ - <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */ - <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ - <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */ - <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ - }; -}; - -&sdmmc2_b4_sleep_pins_a { - pins { - pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */ - <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */ - <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */ - <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */ - <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */ - <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */ - }; -}; - -&sdmmc2_d47_pins_a { - pins { - pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ - <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ - <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */ - <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */ - }; -}; - -&sdmmc2_d47_sleep_pins_a { - pins { - pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ - <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */ - <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */ - <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */ - }; -}; - -&sdmmc3 { - pinctrl-names = "default", "opendrain", "sleep"; - pinctrl-0 = <&sdmmc3_b4_pins_b>; - pinctrl-1 = <&sdmmc3_b4_od_pins_b>; - pinctrl-2 = <&sdmmc3_b4_sleep_pins_b>; - non-removable; - no-1-8-v; - st,neg-edge; - bus-width = <4>; - vmmc-supply = <®_3v3>; - vqmmc-supply = <®_3v3>; - mmc-pwrseq = <&wifi_pwrseq>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - mmc@1 { - compatible = "prt,prtt1c-wfm200", "silabs,wf200"; - reg = <1>; - }; -}; - -&sdmmc3_b4_od_pins_b { - pins1 { - pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */ - <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */ - <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ - <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */ - }; -}; - -&sdmmc3_b4_pins_b { - pins1 { - pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */ - <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */ - <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ - <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */ - <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */ - }; -}; - -&sdmmc3_b4_sleep_pins_b { - pins { - pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */ - <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */ - <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */ - <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */ - <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */ - <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */ - }; -}; - -&spi1 { - pinctrl-0 = <&spi1_pins_b>; - pinctrl-names = "default"; - cs-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; - /delete-property/dmas; - /delete-property/dma-names; - status = "okay"; - - switch@0 { - compatible = "nxp,sja1105q"; - reg = <0>; - spi-max-frequency = <4000000>; - spi-rx-delay-us = <1>; - spi-tx-delay-us = <1>; - spi-cpha; - - reset-gpios = <&gpioe 6 GPIO_ACTIVE_LOW>; - - clocks = <&clock_sja1105>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "t1l0"; - phy-mode = "rmii"; - phy-handle = <&t1l0_phy>; - }; - - port@1 { - reg = <1>; - label = "t1l1"; - phy-mode = "rmii"; - phy-handle = <&t1l1_phy>; - }; - - port@2 { - reg = <2>; - label = "t1l2"; - phy-mode = "rmii"; - phy-handle = <&t1l2_phy>; - }; - - port@3 { - reg = <3>; - label = "rj45"; - phy-handle = <&rj45_phy>; - phy-mode = "rgmii-id"; - }; - - port@4 { - reg = <4>; - label = "cpu"; - ethernet = <ðernet0>; - phy-mode = "rmii"; - - fixed-link { - speed = <100>; - full-duplex; - }; - }; - }; - }; -}; |