1 files changed, 0 insertions, 214 deletions
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
deleted file mode 100644
index 063ee8ac5dcb..000000000000
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ /dev/null
@@ -1,214 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
- * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
- */
-/dts-v1/;
-
-#include "stm32mp157c-ed1.dts"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
-	compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	aliases {
-		serial0 = &uart4;
-		ethernet0 = &ethernet0;
-	};
-
-	panel_backlight: panel-backlight {
-		compatible = "gpio-backlight";
-		gpios = <&gpiod 13 GPIO_ACTIVE_LOW>;
-		default-on;
-		status = "okay";
-	};
-};
-
-&cec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&cec_pins_a>;
-	status = "okay";
-};
-
-&dsi {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			dsi_in: endpoint {
-				remote-endpoint = <&ltdc_ep0_out>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-			dsi_out: endpoint {
-				remote-endpoint = <&dsi_panel_in>;
-			};
-		};
-	};
-
-	panel-dsi@0 {
-		compatible = "raydium,rm68200";
-		reg = <0>;
-		reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
-		backlight = <&panel_backlight>;
-		status = "okay";
-
-		port {
-			dsi_panel_in: endpoint {
-				remote-endpoint = <&dsi_out>;
-			};
-		};
-	};
-};
-
-&ethernet0 {
-	status = "okay";
-	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
-	pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
-	pinctrl-names = "default", "sleep";
-	phy-mode = "rgmii";
-	max-speed = <1000>;
-	phy-handle = <&phy0>;
-
-	mdio0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "snps,dwmac-mdio";
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
-	i2c-scl-rising-time-ns = <185>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-};
-
-&i2c5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c5_pins_a>;
-	i2c-scl-rising-time-ns = <185>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-};
-
-&ltdc {
-	status = "okay";
-
-	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ltdc_ep0_out: endpoint@0 {
-			reg = <0>;
-			remote-endpoint = <&dsi_in>;
-		};
-	};
-};
-
-&m_can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&m_can1_pins_a>;
-	status = "okay";
-};
-
-&qspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
-	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	flash0: mx66l51235l@0 {
-		reg = <0>;
-		spi-rx-bus-width = <4>;
-		spi-max-frequency = <108000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	flash1: mx66l51235l@1 {
-		reg = <1>;
-		spi-rx-bus-width = <4>;
-		spi-max-frequency = <108000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
-
-&spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins_a>;
-	status = "disabled";
-};
-
-&timers2 {
-	status = "disabled";
-	pwm {
-		pinctrl-0 = <&pwm2_pins_a>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
-	timer@1 {
-		status = "okay";
-	};
-};
-
-&timers8 {
-	status = "disabled";
-	pwm {
-		pinctrl-0 = <&pwm8_pins_a>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
-	timer@7 {
-		status = "okay";
-	};
-};
-
-&timers12 {
-	status = "disabled";
-	pwm {
-		pinctrl-0 = <&pwm12_pins_a>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
-	timer@11 {
-		status = "okay";
-	};
-};
-
-&usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
-	status = "okay";
-};
-
-&usbotg_hs {
-	dr_mode = "peripheral";
-	phys = <&usbphyc_port1 0>;
-	phy-names = "usb2-phy";
-	status = "okay";
-};
-
-&usbphyc {
-	status = "okay";
-};