diff options
Diffstat (limited to 'arch/arm/boot')
249 files changed, 7463 insertions, 4129 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index efe4152e5846..59829fc90315 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -561,7 +561,9 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-wandboard-revd1.dtb \ imx6dl-yapp4-draco.dtb \ imx6dl-yapp4-hydra.dtb \ + imx6dl-yapp4-lynx.dtb \ imx6dl-yapp4-orion.dtb \ + imx6dl-yapp4-phoenix.dtb \ imx6dl-yapp4-ursa.dtb \ imx6q-apalis-eval.dtb \ imx6q-apalis-ixora.dtb \ @@ -668,6 +670,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-wandboard-revb1.dtb \ imx6q-wandboard-revd1.dtb \ imx6q-yapp4-crux.dtb \ + imx6q-yapp4-pegasus.dtb \ imx6q-zii-rdu2.dtb \ imx6qp-mba6b.dtb \ imx6qp-nitrogen6_max.dtb \ @@ -683,6 +686,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6qp-vicutp.dtb \ imx6qp-wandboard-revd1.dtb \ imx6qp-yapp4-crux-plus.dtb \ + imx6qp-yapp4-pegasus-plus.dtb \ imx6qp-zii-rdu2.dtb \ imx6s-dhcom-drc02.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ @@ -690,6 +694,7 @@ dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-kobo-aura2.dtb \ imx6sl-tolino-shine2hd.dtb \ imx6sl-tolino-shine3.dtb \ + imx6sl-tolino-vision.dtb \ imx6sl-tolino-vision5.dtb \ imx6sl-warp.dtb dtb-$(CONFIG_SOC_IMX6SLL) += \ @@ -755,6 +760,10 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ull-phytec-segin-lc-rdk-nand.dtb \ imx6ull-phytec-tauri-emmc.dtb \ imx6ull-phytec-tauri-nand.dtb \ + imx6ull-tarragon-master.dtb \ + imx6ull-tarragon-micro.dtb \ + imx6ull-tarragon-slave.dtb \ + imx6ull-tarragon-slavext.dtb \ imx6ull-tqma6ull2-mba6ulx.dtb \ imx6ull-tqma6ull2l-mba6ulx.dtb \ imx6ulz-14x14-evk.dtb \ @@ -994,16 +1003,24 @@ dtb-$(CONFIG_SOC_OMAP5) += \ omap5-igep0050.dtb \ omap5-sbc-t54.dtb \ omap5-uevm.dtb +am57xx-evm-dtbs := am57xx-beagle-x15.dtb am57xx-evm.dtbo +am57xx-evm-reva3-dtbs := am57xx-beagle-x15-revc.dtb am57xx-evm.dtbo dtb-$(CONFIG_SOC_DRA7XX) += \ am57xx-beagle-x15.dtb \ am57xx-beagle-x15-revb1.dtb \ am57xx-beagle-x15-revc.dtb \ + am57xx-evm.dtb \ + am57xx-evm-reva3.dtb \ am5729-beagleboneai.dtb \ am57xx-cl-som-am57x.dtb \ am57xx-sbc-am57x.dtb \ am572x-idk.dtb \ + am572x-idk-touchscreen.dtbo \ am571x-idk.dtb \ + am571x-idk-touchscreen.dtbo \ am574x-idk.dtb \ + am57xx-idk-lcd-osd101t2045.dtbo \ + am57xx-idk-lcd-osd101t2587.dtbo \ dra7-evm.dtb \ dra72-evm.dtb \ dra72-evm-revc.dtb \ @@ -1033,9 +1050,6 @@ dtb-$(CONFIG_ARCH_PXA) += \ pxa300-raumfeld-speaker-m.dtb \ pxa300-raumfeld-speaker-one.dtb \ pxa300-raumfeld-speaker-s.dtb -dtb-$(CONFIG_ARCH_OXNAS) += \ - ox810se-wd-mbwe.dtb \ - ox820-cloudengines-pogoplug-series-3.dtb dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8016-sbc.dtb \ qcom-apq8026-asus-sparrow.dtb \ @@ -1397,6 +1411,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-s3-elimo-initium.dtb \ sun8i-s3-lichee-zero-plus.dtb \ sun8i-s3-pinecube.dtb \ + sun8i-t113s-mangopi-mq-r-t113.dtb \ sun8i-t3-cqa3t-bv3.dtb \ sun8i-v3-sl631-imx179.dtb \ sun8i-v3s-licheepi-zero.dtb \ @@ -1406,7 +1421,9 @@ dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb dtb-$(CONFIG_MACH_SUNIV) += \ - suniv-f1c100s-licheepi-nano.dtb + suniv-f1c100s-licheepi-nano.dtb \ + suniv-f1c200s-lctech-pi.dtb \ + suniv-f1c200s-popstick-v1.1.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ tegra20-acer-a500-picasso.dtb \ tegra20-asus-tf101.dtb \ diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi index 947497413977..67c7fcc52ce6 100644 --- a/arch/arm/boot/dts/am335x-pcm-953.dtsi +++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi @@ -29,25 +29,23 @@ }; /* User IO */ - user_leds: user_leds { + user_leds: user-leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&user_leds_pins>; user-led0 { gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "gpio"; default-state = "on"; }; user-led1 { gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; - linux,default-trigger = "gpio"; default-state = "on"; }; }; - user_buttons: user_buttons { + user_buttons: user-buttons { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&user_buttons_pins>; @@ -70,14 +68,14 @@ }; &am33xx_pinmux { - user_buttons_pins: pinmux_user_buttons { + user_buttons_pins: pinmux-user-buttons { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu0.gpio3_7 */ AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu1.gpio3_8 */ >; }; - user_leds_pins: pinmux_user_leds { + user_leds_pins: pinmux-user-leds { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn1.gpio1_30 */ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn2.gpio1_31 */ @@ -87,7 +85,7 @@ /* CAN */ &am33xx_pinmux { - dcan1_pins: pinmux_dcan1 { + dcan1_pins: pinmux-dcan1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart1_rxd.dcan1_tx_mux2 */ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLUP, MUX_MODE2) /* uart1_txd.dcan1_rx_mux2 */ @@ -144,7 +142,7 @@ pinctrl-names = "default"; pinctrl-0 = <&cb_gpio_pins>; - cb_gpio_pins: pinmux_cb_gpio { + cb_gpio_pins: pinmux-cb-gpio { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_ctsn.gpio1_8 */ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_rtsn.gpio1_9 */ @@ -154,7 +152,7 @@ /* MMC */ &am33xx_pinmux { - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: pinmux-mmc1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) @@ -178,14 +176,14 @@ /* UARTs */ &am33xx_pinmux { - uart0_pins: pinmux_uart0 { + uart0_pins: pinmux-uart0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - uart1_pins: pinmux_uart1 { + uart1_pins: pinmux-uart1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) @@ -194,14 +192,14 @@ >; }; - uart2_pins: pinmux_uart2 { + uart2_pins: pinmux-uart2 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */ >; }; - uart3_pins: pinmux_uart3 { + uart3_pins: pinmux-uart3 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxd3.uart3_rxd */ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rxd2.uart3_txd */ diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index e2cec1ffaa4c..034dc5181679 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -14,6 +14,7 @@ aliases { rtc0 = &i2c_rtc; rtc1 = &rtc; + rtc2 = &tps; }; cpus { @@ -48,7 +49,7 @@ /* EMMC */ &am33xx_pinmux { - emmc_pins: pinmux_emmc_pins { + emmc_pins: pinmux-emmc-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ @@ -124,7 +125,7 @@ /* I2C Busses */ &am33xx_pinmux { - i2c0_pins: pinmux_i2c0 { + i2c0_pins: pinmux-i2c0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0) @@ -164,7 +165,7 @@ /* NAND memory */ &am33xx_pinmux { - nandflash_pins: pinmux_nandflash { + nandflash_pins: pinmux-nandflash { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) @@ -202,7 +203,6 @@ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ nand-bus-width = <8>; ti,nand-ecc-opt = "bch8"; - gpmc,device-nand = "true"; gpmc,device-width = <1>; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; @@ -316,7 +316,7 @@ /* SPI Busses */ &am33xx_pinmux { - spi0_pins: pinmux_spi0 { + spi0_pins: pinmux-spi0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE0) diff --git a/arch/arm/boot/dts/am335x-regor.dtsi b/arch/arm/boot/dts/am335x-regor.dtsi index 7b3966ee51b9..3894f14a914c 100644 --- a/arch/arm/boot/dts/am335x-regor.dtsi +++ b/arch/arm/boot/dts/am335x-regor.dtsi @@ -18,7 +18,7 @@ }; /* User IO */ - user_leds: user_leds { + user_leds: user-leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&user_leds_pins>; @@ -39,7 +39,7 @@ /* User Leds */ &am33xx_pinmux { - user_leds_pins: pinmux_user_leds { + user_leds_pins: pinmux-user-leds { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2_22 */ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mcasp0_fsx.gpio3_15 */ @@ -49,7 +49,7 @@ /* CAN Busses */ &am33xx_pinmux { - dcan1_pins: pinmux_dcan1 { + dcan1_pins: pinmux-dcan1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */ @@ -65,7 +65,7 @@ /* Ethernet */ &am33xx_pinmux { - ethernet1_pins: pinmux_ethernet1 { + ethernet1_pins: pinmux-ethernet1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */ @@ -108,7 +108,7 @@ pinctrl-names = "default"; pinctrl-0 = <&user_gpios_pins>; - user_gpios_pins: pinmux_user_gpios { + user_gpios_pins: pinmux-user-gpios { pinctrl-single,pins = < /* DIGIN 1-4 */ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT, MUX_MODE7) /* gpmc_ad11.gpio0_27 */ @@ -126,7 +126,7 @@ /* MMC */ &am33xx_pinmux { - mmc1_pins: pinmux_mmc1 { + mmc1_pins: pinmux-mmc1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) @@ -155,14 +155,14 @@ /* UARTs */ &am33xx_pinmux { - uart0_pins: pinmux_uart0 { + uart0_pins: pinmux-uart0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - uart2_pins: pinmux_uart2 { + uart2_pins: pinmux-uart2 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */ @@ -184,7 +184,7 @@ /* RS485 - UART1 */ &am33xx_pinmux { - uart1_rs485_pins: pinmux_uart1_rs485_pins { + uart1_rs485_pins: pinmux-uart1-rs485-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi index f957fea8208e..6a103f17585b 100644 --- a/arch/arm/boot/dts/am335x-wega.dtsi +++ b/arch/arm/boot/dts/am335x-wega.dtsi @@ -8,8 +8,34 @@ model = "Phytec AM335x phyBOARD-WEGA"; compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"; - sound: sound_iface { - compatible = "ti,da830-evm-audio"; + sound: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "snd-wega"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_iface_main>; + simple-audio-card,frame-master = <&sound_iface_main>; + simple-audio-card,mclk-fs = <32>; + simple-audio-card,widgets = + "Line", "Line In", + "Line", "Line Out", + "Speaker", "Speaker"; + simple-audio-card,routing = + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "Speaker", "SPOP", + "Speaker", "SPOM", + "LINE1L", "Line In", + "LINE1R", "Line In"; + + simple-audio-card,cpu { + sound-dai = <&mcasp0>; + }; + + sound_iface_main: simple-audio-card,codec { + sound-dai = <&tlv320aic3007>; + clocks = <&mcasp0_fck>; + }; + }; vcc3v3: fixedregulator1 { @@ -23,7 +49,7 @@ /* Audio */ &am33xx_pinmux { - mcasp0_pins: pinmux_mcasp0 { + mcasp0_pins: pinmux-mcasp0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) @@ -36,6 +62,7 @@ &i2c0 { tlv320aic3007: tlv320aic3007@18 { + #sound-dai-cells = <0>; compatible = "ti,tlv320aic3007"; reg = <0x18>; AVDD-supply = <&vcc3v3>; @@ -47,6 +74,7 @@ }; &mcasp0 { + #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&mcasp0_pins>; op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */ @@ -59,23 +87,10 @@ status = "okay"; }; -&sound { - ti,model = "AM335x-Wega"; - ti,audio-codec = <&tlv320aic3007>; - ti,mcasp-controller = <&mcasp0>; - ti,audio-routing = - "Line Out", "LLOUT", - "Line Out", "RLOUT", - "LINE1L", "Line In", - "LINE1R", "Line In"; - clocks = <&mcasp0_fck>; - clock-names = "mclk"; - status = "okay"; -}; /* CAN Busses */ &am33xx_pinmux { - dcan1_pins: pinmux_dcan1 { + dcan1_pins: pinmux-dcan1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */ @@ -91,7 +106,7 @@ /* Ethernet */ &am33xx_pinmux { - ethernet1_pins: pinmux_ethernet1 { + ethernet1_pins: pinmux-ethernet1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */ @@ -131,7 +146,7 @@ /* MMC */ &am33xx_pinmux { - mmc1_pins: pinmux_mmc1 { + mmc1_pins: pinmux-mmc1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) @@ -161,14 +176,14 @@ /* UARTs */ &am33xx_pinmux { - uart0_pins: pinmux_uart0 { + uart0_pins: pinmux-uart0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - uart1_pins: pinmux_uart1_pins { + uart1_pins: pinmux-uart1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) diff --git a/arch/arm/boot/dts/am571x-idk-touchscreen.dtso b/arch/arm/boot/dts/am571x-idk-touchscreen.dtso new file mode 100644 index 000000000000..c051ee6c1130 --- /dev/null +++ b/arch/arm/boot/dts/am571x-idk-touchscreen.dtso @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen: edt-ft5506@38 { + compatible = "edt,edt-ft5506", "edt,edt-ft5x06"; + + reg = <0x38>; + + interrupt-parent = <&gpio5>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + + /* GPIO line is inverted before going to touch panel */ + reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; + + touchscreen-size-x = <1920>; + touchscreen-size-y = <1200>; + + wakeup-source; + }; +}; diff --git a/arch/arm/boot/dts/am572x-idk-touchscreen.dtso b/arch/arm/boot/dts/am572x-idk-touchscreen.dtso new file mode 100644 index 000000000000..573e932b1239 --- /dev/null +++ b/arch/arm/boot/dts/am572x-idk-touchscreen.dtso @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen: edt-ft5506@38 { + compatible = "edt,edt-ft5506", "edt,edt-ft5x06"; + + reg = <0x38>; + + interrupt-parent = <&gpio3>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>; + + /* GPIO line is inverted before going to touch panel */ + reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; + + touchscreen-size-x = <1920>; + touchscreen-size-y = <1200>; + + wakeup-source; + }; +}; diff --git a/arch/arm/boot/dts/am57xx-evm.dtso b/arch/arm/boot/dts/am57xx-evm.dtso new file mode 100644 index 000000000000..12385a31061e --- /dev/null +++ b/arch/arm/boot/dts/am57xx-evm.dtso @@ -0,0 +1,127 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * DT overlay for AM57xx GP EVM boards + * + * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +&{/} { + compatible = "ti,am5728-evm", "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; + model = "TI AM5728 EVM"; + + aliases { + display0 = "/display"; + display1 = "/connector"; // Fixme: &lcd0 and &hdmi0 could be + // resolved here correcly based on + // information in the base dtb symbol + // table with a fix in dtc + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-user1 { + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + label = "USER1"; + linux,code = <BTN_1>; + }; + + button-user2 { + gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; + label = "USER2"; + linux,code = <BTN_2>; + }; + + button-user3 { + gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + label = "USER3"; + linux,code = <BTN_3>; + }; + + button-user4 { + gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + label = "USER4"; + linux,code = <BTN_4>; + }; + + button-user5 { + gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + label = "USER5"; + linux,code = <BTN_5>; + }; + }; + + lcd0: display { + compatible = "osddisplays,osd070t1718-19ts", "panel-dpi"; + backlight = <&lcd_bl>; + enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + label = "lcd"; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + + lcd_bl: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 243 245 247 249 251 252 253 255>; + default-brightness-level = <8>; + pwms = <&ehrpwm1 0 50000 0>; + }; +}; + +&ehrpwm1 { + status = "okay"; +}; + +&epwmss1 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; + clock-frequency = <400000>; + + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@5c { + compatible = "pixcir,pixcir_tangoc"; + attb-gpio = <&gpio2 4 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio2>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + reg = <0x5c>; + reset-gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <600>; + }; +}; + +&uart8 { + status = "okay"; +}; + +&dss { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpi_out: endpoint { + data-lines = <24>; + remote-endpoint = <&lcd_in>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso new file mode 100644 index 000000000000..25d74e9f3c9e --- /dev/null +++ b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +&{/} { + aliases { + display0 = "/display"; + display1 = "/connector"; + }; + + lcd_bl: backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 50000 1>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; +}; + +&dsi_bridge { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + lcd: display { + compatible = "osddisplays,osd101t2045-53ts"; + reg = <0>; + + label = "lcd"; + + backlight = <&lcd_bl>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +&dsi_bridge_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&lcd_in>; + }; + }; +}; + +&epwmss0 { + status = "okay"; +}; + +&ecap0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso new file mode 100644 index 000000000000..8cea7ba32487 --- /dev/null +++ b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&{/} { + aliases { + display0 = "/display"; + display1 = "/connector"; + }; + + lcd_bl: backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 50000 1>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; +}; + +&dsi_bridge { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + lcd: display { + compatible = "osddisplays,osd101t2587-53ts"; + reg = <0>; + + label = "lcd"; + + backlight = <&lcd_bl>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +&dsi_bridge_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&lcd_in>; + }; + }; +}; + +&epwmss0 { + status = "okay"; +}; + +&ecap0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index be005c9f42ef..2fce8e794265 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -171,8 +171,8 @@ port@5 { reg = <5>; - label = "cpu"; ethernet = <ð1>; + phy-mode = "rgmii-id"; fixed-link { speed = <1000>; full-duplex; diff --git a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts index 095df5567c93..f4c4b213ef4e 100644 --- a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts +++ b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts @@ -148,7 +148,7 @@ port@0 { ethernet = <ð0>; - label = "cpu"; + phy-mode = "rgmii"; reg = <0>; fixed-link { diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts index c9ac630e5874..1990f7d0cc79 100644 --- a/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts +++ b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts @@ -68,8 +68,13 @@ port@10 { reg = <10>; - label = "cpu"; + phy-mode = "2500base-x"; + ethernet = <ð1>; + fixed-link { + speed = <2500>; + full-duplex; + }; }; }; diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts index fa653b379490..b795ad573891 100644 --- a/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts +++ b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts @@ -48,8 +48,13 @@ port@5 { reg = <5>; - label = "cpu"; + phy-mode = "2500base-x"; ethernet = <ð1>; + + fixed-link { + speed = <2500>; + full-duplex; + }; }; }; diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 85e8d966f6c1..fc8216fd9f60 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -195,7 +195,7 @@ port@5 { reg = <5>; - label = "cpu"; + phy-mode = "sgmii"; ethernet = <ð2>; fixed-link { diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index 0c1f238e4c30..2d8d319bec83 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -479,7 +479,6 @@ ports@5 { reg = <5>; - label = "cpu"; ethernet = <ð1>; phy-mode = "rgmii-id"; @@ -491,7 +490,6 @@ ports@6 { reg = <6>; - label = "cpu"; ethernet = <ð0>; phy-mode = "rgmii-id"; diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index 2bcec5419b66..45cc784659fd 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -62,7 +62,7 @@ }; usb@58000 { - status = "ok"; + status = "okay"; }; ethernet@70000 { diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index dbe8dfe236fb..7a0614fd0c93 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -302,7 +302,7 @@ port@5 { reg = <5>; - label = "cpu"; + phy-mode = "rgmii-id"; ethernet = <ð0>; fixed-link { speed = <1000>; diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts index 4b91600eaf62..1e0e88465254 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts @@ -251,6 +251,14 @@ pinctrl-0 = <&pinctrl_rgmii1_default>; }; +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + &fmc { status = "okay"; flash@0 { @@ -439,6 +447,26 @@ status = "okay"; }; +&i2c8 { + status = "okay"; + + gpio@77 { + compatible = "nxp,pca9539"; + reg = <0x77>; + gpio-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <2>; + + bmc-ocp0-en-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_LOW>; + output-high; + line-name = "bmc-ocp0-en-n"; + }; + }; +}; + &i2c9 { status = "okay"; }; @@ -530,13 +558,20 @@ /*V0-V7*/ "s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n", "host0-reboot-ack-n","host0-ready","host0-shd-req-n", "host0-shd-ack-n","s0-overtemp-n", - /*W0-W7*/ "ocp-aux-pwren","ocp-main-pwren","ocp-pgood","", + /*W0-W7*/ "","ocp-main-pwren","ocp-pgood","", "bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel", /*X0-X7*/ "i2c-backup-sel","s1-fault-alert","s1-fw-boot-ok", "s1-hightemp-n","s0-spi-auth-fail-n","s1-sys-auth-failure-n", "s1-overtemp-n","s1-spi-auth-fail-n", /*Y0-Y7*/ "","","","","","","","host0-special-boot", /*Z0-Z7*/ "reset-button","ps0-pgood","ps1-pgood","","","","",""; + + ocp-aux-pwren-hog { + gpio-hog; + gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "ocp-aux-pwren"; + }; }; &gpio1 { diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts index 9b4cf5ebe6d5..c4b2efbfdf56 100644 --- a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts +++ b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts @@ -63,7 +63,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; - spi-max-frequency = <100000000>; /* 100 MHz */ + spi-max-frequency = <50000000>; /* 50 MHz */ #include "openbmc-flash-layout.dtsi" }; }; @@ -202,3 +202,7 @@ status = "okay"; aspeed,lpc-io-reg = <0xca2>; }; + +&peci0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts index ff4c07c69af1..4554abf0c7cd 100644 --- a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts +++ b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts @@ -31,7 +31,7 @@ }; system-fault { - gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; + gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; panic-indicator; }; }; @@ -51,7 +51,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; - spi-max-frequency = <100000000>; /* 100 MHz */ + spi-max-frequency = <50000000>; /* 50 MHz */ #include "openbmc-flash-layout-64.dtsi" }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts index 8c05bd56ce1e..7a53f54833a0 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts @@ -156,6 +156,7 @@ &i2c8 { status = "okay"; + mctp-controller; temperature-sensor@1f { compatible = "ti,tmp421"; reg = <0x1f>; @@ -165,6 +166,10 @@ compatible = "st,24c32"; reg = <0x50>; }; + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; }; &i2c9 { @@ -238,4 +243,52 @@ &gpio0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpiu1_default &pinctrl_gpiu7_default>; + + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "power-bmc-nic","presence-ocp-debug", + "power-bmc-slot1","power-bmc-slot2", + "power-bmc-slot3","power-bmc-slot4","","", + /*C0-C7*/ "presence-ocp-nic","","","reset-cause-nic-primary", + "reset-cause-nic-secondary","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "slot1-bmc-reset-button","slot2-bmc-reset-button", + "slot3-bmc-reset-button","slot4-bmc-reset-button", + "","","","presence-emmc", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","", + "presence-mb-slot1","presence-mb-slot2", + "presence-mb-slot3","presence-mb-slot4", + /*I0-I7*/ "","","","","","","bb-bmc-button","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","power-nic-bmc-enable","","usb-bmc-enable","","reset-cause-usb-hub","","", + /*N0-N7*/ "","","","","bmc-ready","","","", + /*O0-O7*/ "","","","","","","fan0-bmc-cpld-enable","fan1-bmc-cpld-enable", + /*P0-P7*/ "fan2-bmc-cpld-enable","fan3-bmc-cpld-enable", + "reset-cause-pcie-slot1","reset-cause-pcie-slot2", + "reset-cause-pcie-slot3","reset-cause-pcie-slot4","","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","power-p5v-usb","presence-bmc-tpm","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","GND", + /*V0-V7*/ "bmc-slot1-ac-button","bmc-slot2-ac-button", + "bmc-slot3-ac-button","bmc-slot4-ac-button", + "","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","reset-cause-emmc","","","","", + /*Z0-Z7*/ "","","","","","","",""; +}; + +&gpio1 { + gpio-line-names = + /*18A0-18A7*/ "","","","","","","","", + /*18B0-18B7*/ "","","","","","","","", + /*18C0-18C7*/ "","","","","","","","", + /*18D0-18D7*/ "","","","","","","","", + /*18E0-18E3*/ "","","","","","","",""; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts index a5be0ee048ec..81902cbe662c 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts @@ -552,14 +552,14 @@ &i2c3 { status = "okay"; - power-supply@58 { - compatible = "ibm,cffps"; - reg = <0x58>; + power-supply@5a { + compatible = "acbel,fsg032"; + reg = <0x5a>; }; - power-supply@59 { - compatible = "ibm,cffps"; - reg = <0x59>; + power-supply@5b { + compatible = "acbel,fsg032"; + reg = <0x5b>; }; }; @@ -686,7 +686,7 @@ }; eeprom@50 { - compatible = "atmel,24c64"; + compatible = "atmel,24c128"; reg = <0x50>; }; @@ -884,16 +884,6 @@ use-ncsi; }; -&mac3 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rmii4_default>; - clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>, - <&syscon ASPEED_CLK_MAC4RCLK>; - clock-names = "MACCLK", "RCLK"; - use-ncsi; -}; - &wdt1 { aspeed,reset-type = "none"; aspeed,external-signal; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts index c3b0cd61ac85..c6f8f20914d1 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts @@ -162,6 +162,11 @@ #size-cells = <1>; ranges; + event_log: tcg_event_log@b3d00000 { + no-map; + reg = <0xb3d00000 0x100000>; + }; + ramoops@b3e00000 { compatible = "ramoops"; reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */ @@ -1887,6 +1892,7 @@ tpm@2e { compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c"; reg = <0x2e>; + memory-region = <&event_log>; }; }; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 8246a60de0d0..172dd748d807 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -863,6 +863,15 @@ clocks = <&syscon ASPEED_CLK_GATE_FSICLK>; status = "disabled"; }; + + udma: dma-controller@1e79e000 { + compatible = "aspeed,ast2600-udma"; + reg = <0x1e79e000 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <28>; + #dma-cells = <1>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index 180e4b1aa2f6..5cd593028aff 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -578,7 +578,8 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <80000000>; + spi-max-frequency = <104000000>; + spi-cs-setup-ns = <7>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi index 8aa9e8dea337..95ecb7d040a8 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi @@ -43,7 +43,8 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <80000000>; + spi-max-frequency = <104000000>; + spi-cs-setup-ns = <7>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi index 83bcf9fe0152..4617805c7748 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi @@ -220,7 +220,8 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <80000000>; + spi-max-frequency = <104000000>; + spi-cs-setup-ns = <7>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts index 1346b8f2b259..999adeca6f33 100644 --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -669,7 +669,8 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <80000000>; + spi-max-frequency = <104000000>; + spi-cs-setup-ns = <7>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/bcm47622.dtsi b/arch/arm/boot/dts/bcm47622.dtsi index f4b2db9bc4ab..cd25ed2757b7 100644 --- a/arch/arm/boot/dts/bcm47622.dtsi +++ b/arch/arm/boot/dts/bcm47622.dtsi @@ -88,6 +88,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -119,6 +125,18 @@ #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm47622-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi index b774a8d63813..93281c47c9ba 100644 --- a/arch/arm/boot/dts/bcm63138.dtsi +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -66,6 +66,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; /* ARM bus */ @@ -203,6 +209,18 @@ status = "disabled"; }; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63138-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + nand_controller: nand-controller@2000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/bcm63148.dtsi b/arch/arm/boot/dts/bcm63148.dtsi index 7cd55d64de71..ba7f265db121 100644 --- a/arch/arm/boot/dts/bcm63148.dtsi +++ b/arch/arm/boot/dts/bcm63148.dtsi @@ -60,6 +60,12 @@ #clock-cells = <0>; clock-frequency = <50000000>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; psci { @@ -100,5 +106,17 @@ clock-names = "refclk"; status = "disabled"; }; + + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63148-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/bcm63178.dtsi b/arch/arm/boot/dts/bcm63178.dtsi index 043e699cbc27..d8268a1e889b 100644 --- a/arch/arm/boot/dts/bcm63178.dtsi +++ b/arch/arm/boot/dts/bcm63178.dtsi @@ -71,6 +71,7 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -78,6 +79,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -109,6 +116,18 @@ #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63178-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/bcm6756.dtsi b/arch/arm/boot/dts/bcm6756.dtsi index 5c72219bc194..49ecc1f0c18c 100644 --- a/arch/arm/boot/dts/bcm6756.dtsi +++ b/arch/arm/boot/dts/bcm6756.dtsi @@ -88,6 +88,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -119,6 +125,19 @@ #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1"; + reg = <0x1000 0x600>, <0x2610 0x4>; + reg-names = "hsspi", "spim-ctrl"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/bcm6846.dtsi b/arch/arm/boot/dts/bcm6846.dtsi index 81513a793815..fbc7d3a5dc5f 100644 --- a/arch/arm/boot/dts/bcm6846.dtsi +++ b/arch/arm/boot/dts/bcm6846.dtsi @@ -61,6 +61,12 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; psci { @@ -100,5 +106,17 @@ clock-names = "refclk"; status = "disabled"; }; + + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6846-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/bcm6855.dtsi b/arch/arm/boot/dts/bcm6855.dtsi index 5fa5feac0e29..5e0fe26530f1 100644 --- a/arch/arm/boot/dts/bcm6855.dtsi +++ b/arch/arm/boot/dts/bcm6855.dtsi @@ -78,6 +78,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -109,6 +115,19 @@ #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6855-hsspi", "brcm,bcmbca-hsspi-v1.1"; + reg = <0x1000 0x600>, <0x2610 0x4>; + reg-names = "hsspi", "spim-ctrl"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/bcm6878.dtsi b/arch/arm/boot/dts/bcm6878.dtsi index 4ec836ac4baf..96529d3d4dc2 100644 --- a/arch/arm/boot/dts/bcm6878.dtsi +++ b/arch/arm/boot/dts/bcm6878.dtsi @@ -61,6 +61,7 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -68,6 +69,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -100,6 +107,18 @@ #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6878-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/bcm947622.dts b/arch/arm/boot/dts/bcm947622.dts index 6f083724ab8e..93b8ce22678d 100644 --- a/arch/arm/boot/dts/bcm947622.dts +++ b/arch/arm/boot/dts/bcm947622.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm963138.dts b/arch/arm/boot/dts/bcm963138.dts index d28c4f130ca2..1b405c249213 100644 --- a/arch/arm/boot/dts/bcm963138.dts +++ b/arch/arm/boot/dts/bcm963138.dts @@ -25,3 +25,7 @@ &serial0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts index 15bec75be74c..b5af61853a07 100644 --- a/arch/arm/boot/dts/bcm963138dvt.dts +++ b/arch/arm/boot/dts/bcm963138dvt.dts @@ -50,3 +50,7 @@ &sata_phy { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm963148.dts b/arch/arm/boot/dts/bcm963148.dts index 98f6a6d09f50..1f5d6d783f09 100644 --- a/arch/arm/boot/dts/bcm963148.dts +++ b/arch/arm/boot/dts/bcm963148.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm963178.dts b/arch/arm/boot/dts/bcm963178.dts index fa096e9cde23..d036e99dd8d1 100644 --- a/arch/arm/boot/dts/bcm963178.dts +++ b/arch/arm/boot/dts/bcm963178.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96756.dts b/arch/arm/boot/dts/bcm96756.dts index 9a4a87ba9c8a..8b104f3fb14a 100644 --- a/arch/arm/boot/dts/bcm96756.dts +++ b/arch/arm/boot/dts/bcm96756.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96846.dts b/arch/arm/boot/dts/bcm96846.dts index c70ebccabc19..55852c229608 100644 --- a/arch/arm/boot/dts/bcm96846.dts +++ b/arch/arm/boot/dts/bcm96846.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96855.dts b/arch/arm/boot/dts/bcm96855.dts index 4438152561ac..2ad880af2104 100644 --- a/arch/arm/boot/dts/bcm96855.dts +++ b/arch/arm/boot/dts/bcm96855.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96878.dts b/arch/arm/boot/dts/bcm96878.dts index 8fbc175cb452..b7af8ade7a9d 100644 --- a/arch/arm/boot/dts/bcm96878.dts +++ b/arch/arm/boot/dts/bcm96878.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 1fdd9a249165..0ca849885d1f 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -415,7 +415,7 @@ &aemif { pinctrl-names = "default"; pinctrl-0 = <&nand_pins>; - status = "ok"; + status = "okay"; cs3 { #address-cells = <2>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 85408d4c6f2e..062c86361640 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -422,7 +422,7 @@ clocks = <&gate_clk 3>; clock-names = "sata"; #phy-cells = <0>; - status = "ok"; + status = "okay"; }; audio0: audio-controller@b0000 { diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts index a1e22f630638..660cc7fac4db 100644 --- a/arch/arm/boot/dts/exynos3250-artik5-eval.dts +++ b/arch/arm/boot/dts/exynos3250-artik5-eval.dts @@ -16,6 +16,10 @@ model = "Samsung ARTIK5 evaluation board"; compatible = "samsung,artik5-eval", "samsung,artik5", "samsung,exynos3250", "samsung,exynos3"; + + aliases { + mmc0 = &mshc_2; + }; }; &mshc_2 { diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index 0ac3f284fbb8..3fdd922e635c 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -17,6 +17,11 @@ / { compatible = "samsung,artik5", "samsung,exynos3250", "samsung,exynos3"; + aliases { + mmc0 = &mshc_0; + mmc1 = &mshc_1; + }; + chosen { stdout-path = &serial_2; }; @@ -321,6 +326,7 @@ vmmc-supply = <&ldo12_reg>; clock-frequency = <100000000>; max-frequency = <100000000>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 80d90fe7fad1..2de877d4ccc5 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -22,6 +22,7 @@ aliases { i2c7 = &i2c_max77836; + mmc0 = &mshc_0; }; memory@40000000 { @@ -443,6 +444,7 @@ vmmc-supply = <&vemmc_reg>; clock-frequency = <100000000>; max-frequency = <100000000>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 1f9cba0607e1..88fb3e68ff02 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -23,6 +23,8 @@ aliases { i2c7 = &i2c_max77836; + mmc0 = &mshc_0; + mmc1 = &mshc_1; }; chosen { @@ -624,6 +626,7 @@ vmmc-supply = <&ldo12_reg>; clock-frequency = <100000000>; max-frequency = <100000000>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 28bb2ce8ccf7..bd37f1b587f0 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -28,9 +28,6 @@ aliases { pinctrl0 = &pinctrl_0; pinctrl1 = &pinctrl_1; - mshc0 = &mshc_0; - mshc1 = &mshc_1; - mshc2 = &mshc_2; spi0 = &spi_0; spi1 = &spi_1; i2c0 = &i2c_0; @@ -346,7 +343,7 @@ }; pmu_system_controller: system-controller@10020000 { - compatible = "samsung,exynos3250-pmu", "syscon"; + compatible = "samsung,exynos3250-pmu", "simple-mfd", "syscon"; reg = <0x10020000 0x4000>; interrupt-controller; #interrupt-cells = <3>; @@ -354,12 +351,11 @@ clock-names = "clkout8"; clocks = <&cmu CLK_FIN_PLL>; #clock-cells = <1>; - }; - mipi_phy: video-phy { - compatible = "samsung,s5pv210-mipi-video-phy"; - #phy-cells = <1>; - syscon = <&pmu_system_controller>; + mipi_phy: mipi-phy { + compatible = "samsung,s5pv210-mipi-video-phy"; + #phy-cells = <1>; + }; }; pd_cam: power-domain@10023c00 { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 44dcb1377475..8dd6976ab0a7 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -105,12 +105,6 @@ reg = <0x12570000 0x14>; }; - mipi_phy: video-phy { - compatible = "samsung,s5pv210-mipi-video-phy"; - #phy-cells = <1>; - syscon = <&pmu_system_controller>; - }; - pd_mfc: power-domain@10023c40 { compatible = "samsung,exynos4210-pd"; reg = <0x10023c40 0x20>; @@ -181,11 +175,16 @@ }; pmu_system_controller: system-controller@10020000 { - compatible = "samsung,exynos4210-pmu", "syscon"; + compatible = "samsung,exynos4210-pmu", "simple-mfd", "syscon"; reg = <0x10020000 0x4000>; interrupt-controller; #interrupt-cells = <3>; interrupt-parent = <&gic>; + + mipi_phy: mipi-phy { + compatible = "samsung,s5pv210-mipi-video-phy"; + #phy-cells = <1>; + }; }; dsi_0: dsi@11c80000 { diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts index bba85011ecc9..37cd4dde53e4 100644 --- a/arch/arm/boot/dts/exynos4210-i9100.dts +++ b/arch/arm/boot/dts/exynos4210-i9100.dts @@ -25,6 +25,12 @@ reg = <0x40000000 0x40000000>; }; + aliases { + mmc0 = &sdhci_0; + mmc1 = &sdhci_2; + mmc2 = &sdhci_3; + }; + chosen { stdout-path = "serial2:115200n8"; }; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 1103e7f92b57..f1927ca15e08 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -30,6 +30,11 @@ 0x70000000 0x10000000>; }; + aliases { + mmc0 = &sdhci_0; + mmc1 = &sdhci_2; + }; + chosen { bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc"; stdout-path = "serial2:115200n8"; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 181c99eca675..b566f878ed84 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -25,6 +25,10 @@ reg = <0x40000000 0x80000000>; }; + aliases { + mmc0 = &sdhci_2; + }; + chosen { bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc"; stdout-path = "serial1:115200n8"; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index b8e9dd23fc51..ff6ee4b2c31b 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -26,6 +26,12 @@ 0x70000000 0x10000000>; }; + aliases { + mmc0 = &sdhci_0; + mmc1 = &sdhci_2; + mmc2 = &sdhci_3; + }; + chosen { bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; stdout-path = "serial2:115200n8"; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 62bf335d5bed..8fe0d5d2be2d 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -24,6 +24,12 @@ 0x50000000 0x10000000>; }; + aliases { + mmc0 = &sdhci_0; + mmc1 = &sdhci_2; + mmc2 = &sdhci_3; + }; + chosen { bootargs = "root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; stdout-path = "serial2:115200n8"; @@ -516,7 +522,7 @@ }; &mct { - compatible = "none"; + status = "disabled"; }; &mdma1 { diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts index b596e997e451..ded232b04e0d 100644 --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts @@ -20,6 +20,10 @@ model = "TOPEET iTop 4412 Elite board based on Exynos4412"; compatible = "topeet,itop4412-elite", "samsung,exynos4412", "samsung,exynos4"; + aliases { + mmc1 = &sdhci_2; + }; + chosen { bootargs = "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootdelay=1 rootwait"; stdout-path = "serial2:115200n8"; @@ -182,7 +186,7 @@ compatible = "wlf,wm8960"; reg = <0x1a>; clocks = <&pmu_system_controller 0>; - clock-names = "MCLK1"; + clock-names = "mclk"; wlf,shared-lrclk; #sound-dai-cells = <0>; }; diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi index e42e39dc0e40..7bc6968af9c3 100644 --- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi +++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi @@ -23,6 +23,10 @@ reg = <0x40000000 0x40000000>; }; + aliases { + mmc0 = &mshc_0; + }; + firmware@203f000 { compatible = "samsung,secure-firmware"; reg = <0x0203f000 0x1000>; @@ -476,6 +480,7 @@ vmmc-supply = <&buck9_reg>; broken-cd; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index 525f945c4b91..e6b949c1a00f 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -25,6 +25,9 @@ aliases { i2c11 = &i2c_max77693; i2c12 = &i2c_max77693_fuel; + mmc0 = &mshc_0; + mmc2 = &sdhci_2; + mmc3 = &sdhci_3; }; chosen { @@ -497,8 +500,7 @@ pinctrl-0 = <&fimc_is_uart>; pinctrl-names = "default"; status = "okay"; - - }; +}; &fimc_lite_0 { status = "okay"; @@ -592,7 +594,6 @@ /* CAM_B_CLKOUT */ clocks = <&camera 1>; clock-names = "extclk"; - samsung,camclk-out = <1>; gpios = <&gpm1 6 GPIO_ACTIVE_LOW>; port { @@ -979,6 +980,7 @@ samsung,dw-mshc-ciu-div = <0>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + mmc-ddr-1_8v; pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 7c2780d3e37c..45ef7b7ba7e0 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -13,6 +13,11 @@ #include "exynos-mfc-reserved-memory.dtsi" / { + aliases { + mmc0 = &mshc_0; + mmc2 = &sdhci_2; + }; + chosen { stdout-path = &serial_1; }; @@ -533,6 +538,7 @@ broken-cd; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index ea9fd284386d..23b151645d66 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -25,6 +25,11 @@ reg = <0x40000000 0x40000000>; }; + aliases { + mmc0 = &mshc_0; + mmc1 = &sdhci_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -498,6 +503,7 @@ broken-cd; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi index 3e05a49f29ff..0b89d5682f85 100644 --- a/arch/arm/boot/dts/exynos4412-p4note.dtsi +++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi @@ -26,6 +26,12 @@ reg = <0x40000000 0x80000000>; }; + aliases { + mmc0 = &mshc_0; + mmc2 = &sdhci_2; + mmc3 = &sdhci_3; + }; + chosen { stdout-path = &serial_2; }; @@ -188,14 +194,12 @@ pinctrl-names = "default"; interrupt-parent = <&gpx0>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - irq-trigger = <0x1>; st,adc-freq = <3>; st,mod-12b = <1>; st,ref-sel = <0>; st,sample-time = <3>; - stmpe_adc { + adc { compatible = "st,stmpe-adc"; #io-channel-cells = <1>; st,norequest-mask = <0x2f>; @@ -695,6 +699,7 @@ samsung,dw-mshc-ciu-div = <0>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + mmc-ddr-1_8v; pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; bus-width = <4>; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index a40ff394977c..715dfcba1417 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -22,6 +22,10 @@ reg = <0x40000000 0x40000000>; }; + aliases { + mmc0 = &sdhci_2; + }; + chosen { bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc"; stdout-path = "serial1:115200n8"; diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts index e0b6162d2e2a..5a2dcdc5c28b 100644 --- a/arch/arm/boot/dts/exynos4412-tiny4412.dts +++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts @@ -17,6 +17,10 @@ model = "FriendlyARM TINY4412 board based on Exynos4412"; compatible = "friendlyarm,tiny4412", "samsung,exynos4412", "samsung,exynos4"; + aliases { + mmc0 = &sdhci_2; + }; + chosen { stdout-path = &serial_0; }; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 11f9dd94b6b3..82a36fb5ee8b 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -28,7 +28,6 @@ pinctrl3 = &pinctrl_3; fimc-lite0 = &fimc_lite_0; fimc-lite1 = &fimc_lite_1; - mshc0 = &mshc_0; }; bus_acp: bus-acp { @@ -798,7 +797,7 @@ }; &pmu_system_controller { - compatible = "samsung,exynos4412-pmu", "syscon"; + compatible = "samsung,exynos4412-pmu", "simple-mfd", "syscon"; clock-names = "clkout0", "clkout1", "clkout2", "clkout3", "clkout4", "clkout8", "clkout9"; clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 2e3da5670bc2..d586189966da 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -23,6 +23,11 @@ reg = <0x40000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -192,12 +197,15 @@ vddio-supply = <&vcc_1v8_reg>; vddlvds-supply = <&vcc_3v3_reg>; reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>; - #address-cells = <1>; - #size-cells = <0>; - port@1 { - reg = <1>; - bridge_out_ep: endpoint { - remote-endpoint = <&panel_ep>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + bridge_out_ep: endpoint { + remote-endpoint = <&panel_ep>; + }; }; }; }; @@ -586,6 +594,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; }; &mmc_2 { diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 831b3494bd46..bb623726ef1e 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -17,6 +17,8 @@ compatible = "samsung,smdk5250", "samsung,exynos5250", "samsung,exynos5"; aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; }; memory@40000000 { @@ -350,6 +352,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; }; &mmc_2 { diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index 3d84b9c6dea3..59b2cc35c37b 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -15,6 +15,9 @@ / { aliases { i2c104 = &i2c_104; + mmc0 = &mmc_0; /* eMMC */ + mmc1 = &mmc_2; /* SD */ + mmc2 = &mmc_3; /* WiFi */ }; memory@40000000 { @@ -549,6 +552,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; }; /* uSD card */ diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index 5eca10ecd550..c12bb17631b7 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -23,6 +23,11 @@ reg = <0x40000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_1; + }; + chosen { bootargs = "console=tty1"; stdout-path = "serial3:115200n8"; @@ -431,6 +436,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; }; /* diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 60a623e3a200..1a4c6c028d03 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -30,10 +30,6 @@ gsc1 = &gsc_1; gsc2 = &gsc_2; gsc3 = &gsc_3; - mshc0 = &mmc_0; - mshc1 = &mmc_1; - mshc2 = &mmc_2; - mshc3 = &mmc_3; i2c4 = &i2c_4; i2c5 = &i2c_5; i2c6 = &i2c_6; @@ -290,7 +286,7 @@ }; pmu_system_controller: system-controller@10040000 { - compatible = "samsung,exynos5250-pmu", "syscon"; + compatible = "samsung,exynos5250-pmu", "simple-mfd", "syscon"; reg = <0x10040000 0x5000>; clock-names = "clkout16"; clocks = <&clock CLK_FIN_PLL>; @@ -298,6 +294,16 @@ interrupt-controller; #interrupt-cells = <3>; interrupt-parent = <&gic>; + + dp_phy: dp-phy { + compatible = "samsung,exynos5250-dp-video-phy"; + #phy-cells = <0>; + }; + + mipi_phy: mipi-phy { + compatible = "samsung,s5pv210-mipi-video-phy"; + #phy-cells = <1>; + }; }; watchdog@101d0000 { @@ -810,18 +816,6 @@ status = "disabled"; }; - dp_phy: video-phy-0 { - compatible = "samsung,exynos5250-dp-video-phy"; - samsung,pmu-syscon = <&pmu_system_controller>; - #phy-cells = <0>; - }; - - mipi_phy: video-phy-1 { - compatible = "samsung,s5pv210-mipi-video-phy"; - #phy-cells = <1>; - syscon = <&pmu_system_controller>; - }; - dsi_0: dsi@14500000 { compatible = "samsung,exynos4210-mipi-dsi"; reg = <0x14500000 0x10000>; diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts index 387b8494f18f..d072a7398866 100644 --- a/arch/arm/boot/dts/exynos5260-xyref5260.dts +++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts @@ -18,6 +18,11 @@ reg = <0x20000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -89,6 +94,7 @@ cap-mmc-highspeed; mmc-hs200-1_8v; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index 6ddd1dd2fb0b..882fc77c4bc4 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -21,6 +21,8 @@ aliases { ethernet = ðernet; + mmc0 = &mmc_0; + mmc1 = &mmc_2; }; memory@40000000 { @@ -513,6 +515,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; mmc-hs200-1_8v; vmmc-supply = <&ldo20_reg>; vqmmc-supply = <&ldo11_reg>; diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts index b8f953c41c73..bb29b76f6f6a 100644 --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -18,6 +18,11 @@ reg = <0x40000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -61,6 +66,7 @@ cap-mmc-highspeed; broken-cd; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 55b7759682a9..809ddda02e53 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -23,6 +23,11 @@ reg = <0x20000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; + }; + chosen { stdout-path = "serial3:115200n8"; }; @@ -778,6 +783,7 @@ status = "okay"; non-removable; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; diff --git a/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi b/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi index 63675fe189cd..f525b2f5e4e0 100644 --- a/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi +++ b/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi @@ -28,6 +28,11 @@ * for more details. */ + aliases { + mmc0 = &mmc_0; + mmc2 = &mmc_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -604,6 +609,7 @@ bus-width = <8>; cap-mmc-highspeed; card-detect-delay = <200>; + mmc-ddr-1_8v; mmc-hs200-1_8v; non-removable; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 9e2123470cad..7a48f2b32819 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -31,6 +31,9 @@ aliases { /* Assign 20 so we don't get confused w/ builtin ones */ i2c20 = &i2c_tunnel; + mmc0 = &mmc_0; /* eMMC */ + mmc1 = &mmc_2; /* uSD */ + mmc2 = &mmc_1; /* WiFi */ }; backlight: backlight { @@ -722,6 +725,7 @@ /* eMMC flash */ &mmc_0 { status = "okay"; + mmc-ddr-1_8v; mmc-hs200-1_8v; cap-mmc-highspeed; non-removable; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 4d7b6d9008a7..e299344e427a 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -21,6 +21,11 @@ reg = <0x20000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; + }; + chosen { bootargs = "init=/linuxrc"; stdout-path = "serial2:115200n8"; @@ -355,6 +360,7 @@ status = "okay"; broken-cd; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 13d7be236a23..dd291f1199f2 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -19,9 +19,6 @@ compatible = "samsung,exynos5420", "samsung,exynos5"; aliases { - mshc0 = &mmc_0; - mshc1 = &mmc_1; - mshc2 = &mmc_2; pinctrl0 = &pinctrl_0; pinctrl1 = &pinctrl_1; pinctrl2 = &pinctrl_2; @@ -696,18 +693,6 @@ status = "disabled"; }; - dp_phy: dp-video-phy { - compatible = "samsung,exynos5420-dp-video-phy"; - samsung,pmu-syscon = <&pmu_system_controller>; - #phy-cells = <0>; - }; - - mipi_phy: mipi-video-phy { - compatible = "samsung,exynos5420-mipi-video-phy"; - syscon = <&pmu_system_controller>; - #phy-cells = <1>; - }; - dsi: dsi@14500000 { compatible = "samsung,exynos5410-mipi-dsi"; reg = <0x14500000 0x10000>; @@ -933,7 +918,7 @@ }; pmu_system_controller: system-controller@10040000 { - compatible = "samsung,exynos5420-pmu", "syscon"; + compatible = "samsung,exynos5420-pmu", "simple-mfd", "syscon"; reg = <0x10040000 0x5000>; clock-names = "clkout16"; clocks = <&clock CLK_FIN_PLL>; @@ -941,6 +926,16 @@ interrupt-controller; #interrupt-cells = <3>; interrupt-parent = <&gic>; + + dp_phy: dp-phy { + compatible = "samsung,exynos5420-dp-video-phy"; + #phy-cells = <0>; + }; + + mipi_phy: mipi-phy { + compatible = "samsung,exynos5420-mipi-video-phy"; + #phy-cells = <1>; + }; }; tmu_cpu0: tmu@10060000 { diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index 30fc677d8bac..2f5b8602e020 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -19,6 +19,10 @@ reg = <0x40000000 0x7ea00000>; }; + aliases { + mmc2 = &mmc_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index e6e7e2ff2a26..b4a851aa8881 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -13,6 +13,10 @@ #include "exynos5422-odroid-core.dtsi" / { + aliases { + mmc0 = &mmc_0; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -472,6 +476,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; mmc-hs200-1_8v; mmc-hs400-1_8v; max-frequency = <200000000>; diff --git a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts index df41723d56d4..c35261a338ff 100644 --- a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts +++ b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts @@ -19,6 +19,10 @@ chassis-type = "handset"; + aliases { + mmc0 = &mmc_0; + }; + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x80000000>; /* 2 GiB */ @@ -597,6 +601,7 @@ /* eMMC flash */ &mmc_0 { status = "okay"; + mmc-ddr-1_8v; mmc-hs200-1_8v; cap-mmc-highspeed; non-removable; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 0ebcb66c6319..1f544f12da6c 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -29,6 +29,9 @@ aliases { /* Assign 20 so we don't get confused w/ builtin ones */ i2c20 = &i2c_tunnel; + mmc0 = &mmc_0; /* eMMC */ + mmc1 = &mmc_2; /* SD */ + mmc2 = &mmc_1; /* WiFi */ }; backlight: backlight { @@ -703,6 +706,7 @@ /* eMMC flash */ &mmc_0 { status = "okay"; + mmc-ddr-1_8v; mmc-hs200-1_8v; mmc-hs400-1_8v; cap-mmc-highspeed; diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts index ce356c469e1e..d7f5daecc9dc 100644 --- a/arch/arm/boot/dts/hi3620-hi4511.dts +++ b/arch/arm/boot/dts/hi3620-hi4511.dts @@ -24,42 +24,42 @@ amba-bus { dual_timer0: dual_timer@800000 { - status = "ok"; + status = "okay"; }; uart0: serial@b00000 { /* console */ pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>; pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>; - status = "ok"; + status = "okay"; }; uart1: serial@b01000 { /* modem */ pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>; pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>; - status = "ok"; + status = "okay"; }; uart2: serial@b02000 { /* audience */ pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>; pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>; - status = "ok"; + status = "okay"; }; uart3: serial@b03000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>; pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>; - status = "ok"; + status = "okay"; }; uart4: serial@b04000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>; pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>; - status = "ok"; + status = "okay"; }; pmx0: pinmux@803000 { diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts index f5691dbc26d2..0210064bf6a5 100644 --- a/arch/arm/boot/dts/hip04-d01.dts +++ b/arch/arm/boot/dts/hip04-d01.dts @@ -23,7 +23,7 @@ soc { uart0: serial@4007000 { - status = "ok"; + status = "okay"; }; }; }; diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts index 14a92fe59770..98672932e41b 100644 --- a/arch/arm/boot/dts/imx28-apf28.dts +++ b/arch/arm/boot/dts/imx28-apf28.dts @@ -14,67 +14,59 @@ device_type = "memory"; reg = <0x40000000 0x08000000>; }; +}; - apb@80000000 { - apbh@80000000 { - nand-controller@8000c000 { - pinctrl-names = "default"; - pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x300000>; - }; +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; - partition@300000 { - label = "env"; - reg = <0x300000 0x80000>; - }; +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; - partition@380000 { - label = "env2"; - reg = <0x380000 0x80000>; - }; + partition@0 { + label = "u-boot"; + reg = <0x0 0x300000>; + }; - partition@400000 { - label = "dtb"; - reg = <0x400000 0x80000>; - }; + partition@300000 { + label = "env"; + reg = <0x300000 0x80000>; + }; - partition@480000 { - label = "splash"; - reg = <0x480000 0x80000>; - }; + partition@380000 { + label = "env2"; + reg = <0x380000 0x80000>; + }; - partition@500000 { - label = "kernel"; - reg = <0x500000 0x800000>; - }; + partition@400000 { + label = "dtb"; + reg = <0x400000 0x80000>; + }; - partition@d00000 { - label = "rootfs"; - reg = <0xd00000 0xf300000>; - }; - }; - }; + partition@480000 { + label = "splash"; + reg = <0x480000 0x80000>; + }; - apbx@80040000 { - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - }; + partition@500000 { + label = "kernel"; + reg = <0x500000 0x800000>; }; - ahb@80080000 { - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; - status = "okay"; - }; + partition@d00000 { + label = "rootfs"; + reg = <0xd00000 0xf300000>; }; }; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts index 1b253b47006c..4704b6141836 100644 --- a/arch/arm/boot/dts/imx28-apf28dev.dts +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -10,166 +10,6 @@ model = "Armadeus Systems APF28Dev docking/development board"; compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28"; - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <4>; - status = "okay"; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_apf28dev>; - - hog_pins_apf28dev: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D16__GPIO_1_16 - MX28_PAD_LCD_D17__GPIO_1_17 - MX28_PAD_LCD_D18__GPIO_1_18 - MX28_PAD_LCD_D19__GPIO_1_19 - MX28_PAD_LCD_D20__GPIO_1_20 - MX28_PAD_LCD_D21__GPIO_1_21 - MX28_PAD_LCD_D22__GPIO_1_22 - MX28_PAD_GPMI_CE1N__GPIO_0_17 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_apf28dev: lcdif-apf28dev@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - usb0_otg_apf28dev: otg-apf28dev@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D23__GPIO_1_23 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_16bit_pins_a - &lcdif_pins_apf28dev>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <16>; - bus-width = <16>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <33000033>; - hactive = <800>; - vactive = <480>; - hback-porch = <96>; - hfront-porch = <96>; - vback-porch = <20>; - vfront-porch = <21>; - hsync-len = <64>; - vsync-len = <4>; - hsync-active = <1>; - vsync-active = <1>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; - }; - - can0: can@80032000 { - pinctrl-names = "default"; - pinctrl-0 = <&can0_pins_a>; - xceiver-supply = <®_can0_vcc>; - status = "okay"; - }; - }; - - apbx@80040000 { - lradc@80050000 { - fsl,lradc-touchscreen-wires = <4>; - status = "okay"; - }; - - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>; - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_pins_a>; - uart-has-rtscts; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_otg_apf28dev - &usb0_id_pins_b>; - vbus-supply = <®_usb0_vbus>; - status = "okay"; - }; - - usb1: usb@80090000 { - status = "okay"; - }; - - mac1: ethernet@800f4000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac1_pins_a>; - phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; - status = "okay"; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -223,3 +63,155 @@ }; }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + uart-has-rtscts; + status = "okay"; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + xceiver-supply = <®_can0_vcc>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_16bit_pins_a + &lcdif_pins_apf28dev>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <16>; + bus-width = <16>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33000033>; + hactive = <800>; + vactive = <480>; + hback-porch = <96>; + hfront-porch = <96>; + vback-porch = <20>; + vfront-porch = <21>; + hsync-len = <64>; + vsync-len = <4>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&lradc { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; +}; + +&mac1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_apf28dev>; + + hog_pins_apf28dev: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D16__GPIO_1_16 + MX28_PAD_LCD_D17__GPIO_1_17 + MX28_PAD_LCD_D18__GPIO_1_18 + MX28_PAD_LCD_D19__GPIO_1_19 + MX28_PAD_LCD_D20__GPIO_1_20 + MX28_PAD_LCD_D21__GPIO_1_21 + MX28_PAD_LCD_D22__GPIO_1_22 + MX28_PAD_GPMI_CE1N__GPIO_0_17 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_apf28dev: lcdif-apf28dev@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + usb0_otg_apf28dev: otg-apf28dev@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D23__GPIO_1_23 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; +}; + +&ssp2 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_otg_apf28dev + &usb0_id_pins_b>; + vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index b86be320496b..f9bf40d96568 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -11,200 +11,6 @@ reg = <0x40000000 0x04000000>; }; - apb@80000000 { - apbh@80000000 { - nand-controller@8000c000 { - pinctrl-names = "default"; - pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; - status = "okay"; - }; - - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>; - bus-width = <4>; - status = "okay"; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>; - bus-width = <4>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_CE1N__GPIO_0_17 - MX28_PAD_GPMI_RDY1__GPIO_0_21 - MX28_PAD_SSP2_MISO__GPIO_2_18 - MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */ - MX28_PAD_PWM3__GPIO_3_28 - MX28_PAD_LCD_RESET__GPIO_3_30 - MX28_PAD_JTAG_RTCK__GPIO_4_20 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_apx4: lcdif-apx4@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP0_DATA4__SSP2_D0 - MX28_PAD_SSP0_DATA5__SSP2_D3 - MX28_PAD_SSP0_DATA6__SSP2_CMD - MX28_PAD_SSP0_DATA7__SSP2_SCK - MX28_PAD_SSP2_SS1__SSP2_D1 - MX28_PAD_SSP2_SS2__SSP2_D2 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP0_DATA7__SSP2_SCK - >; - fsl,drive-strength = <MXS_DRIVE_12mA>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_apx4>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <30000000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hfront-porch = <40>; - vback-porch = <32>; - vfront-porch = <13>; - hsync-len = <48>; - vsync-len = <3>; - hsync-active = <1>; - vsync-active = <1>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; - }; - }; - - apbx@80040000 { - saif0: saif@80042000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif0_pins_a>; - status = "okay"; - }; - - saif1: saif@80046000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif1_pins_a>; - fsl,saif-master = <&saif0>; - status = "okay"; - }; - - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - sgtl5000: codec@a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - #sound-dai-cells = <0>; - VDDA-supply = <®_3p3v>; - VDDIO-supply = <®_3p3v>; - clocks = <&saif0>; - }; - - pcf8563: rtc@51 { - compatible = "phg,pcf8563"; - reg = <0x51>; - }; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_pins_a>; - status = "okay"; - }; - - auart1: serial@8006c000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart1_2pins_a>; - status = "okay"; - }; - - auart2: serial@8006e000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart2_2pins_a>; - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins_a>; - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb1: usb@80090000 { - status = "okay"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - status = "okay"; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -238,3 +44,189 @@ }; }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; +}; + +&auart1 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_2pins_a>; + status = "okay"; +}; + +&auart2 { + pinctrl-names = "default"; + pinctrl-0 = <&auart2_2pins_a>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_apx4>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hfront-porch = <40>; + vback-porch = <32>; + vfront-porch = <13>; + hsync-len = <48>; + vsync-len = <3>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + clocks = <&saif0>; + }; + + pcf8563: rtc@51 { + compatible = "phg,pcf8563"; + reg = <0x51>; + }; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_CE1N__GPIO_0_17 + MX28_PAD_GPMI_RDY1__GPIO_0_21 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */ + MX28_PAD_PWM3__GPIO_3_28 + MX28_PAD_LCD_RESET__GPIO_3_30 + MX28_PAD_JTAG_RTCK__GPIO_4_20 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_apx4: lcdif-apx4@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA4__SSP2_D0 + MX28_PAD_SSP0_DATA5__SSP2_D3 + MX28_PAD_SSP0_DATA6__SSP2_CMD + MX28_PAD_SSP0_DATA7__SSP2_SCK + MX28_PAD_SSP2_SS1__SSP2_D1 + MX28_PAD_SSP2_SS2__SSP2_D2 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA7__SSP2_SCK + >; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&saif0 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; +}; + +&saif1 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; +}; + +&ssp2 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>; + bus-width = <4>; + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usbphy1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts index 85aa1cc3ff66..d004b1cbb4ae 100644 --- a/arch/arm/boot/dts/imx28-cfa10036.dts +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -16,107 +16,6 @@ reg = <0x40000000 0x08000000>; }; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - ssd1306_cfa10036: ssd1306-10036@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP0_DATA7__GPIO_2_7 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins_cfa10036: leds-10036@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_AUART1_RX__GPIO_3_4 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - usb0_otg_cfa10036: otg-10036@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_RDY0__USB0_ID - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 { - reg = <0>; - fsl,pinmux-ids = < - 0x31c3 /* - MX28_PAD_PWM3__GPIO_3_28 */ - >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; - }; - - }; - - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - vmmc-supply = <®_vddio_sd0>; - bus-width = <4>; - status = "okay"; - }; - }; - - apbx@80040000 { - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_b>; - status = "okay"; - }; - - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_b>; - clock-frequency = <400000>; - status = "okay"; - - ssd1306: oled@3c { - compatible = "solomon,ssd1306fb-i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&ssd1306_cfa10036>; - reg = <0x3c>; - reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; - solomon,height = <32>; - solomon,width = <128>; - solomon,page-offset = <0>; - solomon,com-lrremap; - solomon,com-invdir; - solomon,com-offset = <32>; - }; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_otg_cfa10036>; - dr_mode = "peripheral"; - phy_type = "utmi"; - status = "okay"; - }; - }; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -138,3 +37,95 @@ gpio = <&gpio3 28 0>; }; }; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_b>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_b>; + clock-frequency = <400000>; + status = "okay"; + + ssd1306: oled@3c { + compatible = "solomon,ssd1306fb-i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&ssd1306_cfa10036>; + reg = <0x3c>; + reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; + solomon,height = <32>; + solomon,width = <128>; + solomon,page-offset = <0>; + solomon,com-lrremap; + solomon,com-invdir; + solomon,com-offset = <32>; + }; +}; + +&pinctrl { + ssd1306_cfa10036: ssd1306-10036@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA7__GPIO_2_7 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + led_pins_cfa10036: leds-10036@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART1_RX__GPIO_3_4 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + usb0_otg_cfa10036: otg-10036@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_RDY0__USB0_ID + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x31c3 /* + MX28_PAD_PWM3__GPIO_3_28 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + vmmc-supply = <®_vddio_sd0>; + bus-width = <4>; + status = "okay"; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_otg_cfa10036>; + dr_mode = "peripheral"; + phy_type = "utmi"; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index 9ef0d567ea48..94d6614c1983 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -78,226 +78,6 @@ }; }; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - usb_pins_cfa10049: usb-10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - i2cmux_pins_cfa10049: i2cmux-10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D22__GPIO_1_22 - MX28_PAD_LCD_D23__GPIO_1_23 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_pins_cfa10049: mac0-10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SS2__GPIO_2_21 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - pca_pins_cfa10049: pca-10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SS0__GPIO_2_19 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - rotary_pins_cfa10049: rotary-10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_I2C0_SCL__GPIO_3_24 - MX28_PAD_I2C0_SDA__GPIO_3_25 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - rotary_btn_pins_cfa10049: rotary-btn-10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SAIF1_SDATA0__GPIO_3_26 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - spi2_pins_cfa10049: spi2-cfa10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SCK__GPIO_2_16 - MX28_PAD_SSP2_MOSI__GPIO_2_17 - MX28_PAD_SSP2_MISO__GPIO_2_18 - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - spi3_pins_cfa10049: spi3-cfa10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_RDN__GPIO_0_24 - MX28_PAD_GPMI_RESETN__GPIO_0_28 - MX28_PAD_GPMI_CE1N__GPIO_0_17 - MX28_PAD_GPMI_ALE__GPIO_0_26 - MX28_PAD_GPMI_CLE__GPIO_0_27 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - lcdif_18bit_pins_cfa10049: lcdif-18bit@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D00__LCD_D0 - MX28_PAD_LCD_D01__LCD_D1 - MX28_PAD_LCD_D02__LCD_D2 - MX28_PAD_LCD_D03__LCD_D3 - MX28_PAD_LCD_D04__LCD_D4 - MX28_PAD_LCD_D05__LCD_D5 - MX28_PAD_LCD_D06__LCD_D6 - MX28_PAD_LCD_D07__LCD_D7 - MX28_PAD_LCD_D08__LCD_D8 - MX28_PAD_LCD_D09__LCD_D9 - MX28_PAD_LCD_D10__LCD_D10 - MX28_PAD_LCD_D11__LCD_D11 - MX28_PAD_LCD_D12__LCD_D12 - MX28_PAD_LCD_D13__LCD_D13 - MX28_PAD_LCD_D14__LCD_D14 - MX28_PAD_LCD_D15__LCD_D15 - MX28_PAD_LCD_D16__LCD_D16 - MX28_PAD_LCD_D17__LCD_D17 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10049: lcdif-evk@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RESET__GPIO_3_30 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - w1_gpio_pins: w1-gpio@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D21__GPIO_1_21 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */ - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_18bit_pins_cfa10049 - &lcdif_pins_cfa10049 - &lcdif_pins_cfa10049_pullup>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <18>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <9216000>; - hactive = <320>; - vactive = <480>; - hback-porch = <2>; - hfront-porch = <2>; - vback-porch = <2>; - vfront-porch = <2>; - hsync-len = <15>; - vsync-len = <15>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - - apbx@80040000 { - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pins_b>; - status = "okay"; - }; - - i2c1: i2c@8005a000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - - lradc@80050000 { - status = "okay"; - fsl,lradc-touchscreen-wires = <4>; - }; - }; - }; - - ahb@80080000 { - usb1: usb@80090000 { - vbus-supply = <®_usb1_vbus>; - pinctrl-0 = <&usb1_pins_a>; - pinctrl-names = "default"; - status = "okay"; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -315,18 +95,6 @@ }; }; - ahb@80080000 { - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a - &mac0_pins_cfa10049>; - phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; - phy-reset-duration = <100>; - status = "okay"; - }; - }; - spi-2 { compatible = "spi-gpio"; pinctrl-names = "default"; @@ -426,3 +194,225 @@ gpios = <&gpio1 21 0>; }; }; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_18bit_pins_cfa10049 + &lcdif_pins_cfa10049 + &lcdif_pins_cfa10049_pullup>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9216000>; + hactive = <320>; + vactive = <480>; + hback-porch = <2>; + hfront-porch = <2>; + vback-porch = <2>; + vfront-porch = <2>; + hsync-len = <15>; + vsync-len = <15>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&lradc { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a + &mac0_pins_cfa10049>; + phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; + phy-reset-duration = <100>; + status = "okay"; +}; + +&pinctrl { + usb_pins_cfa10049: usb-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D07__GPIO_0_7 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + i2cmux_pins_cfa10049: i2cmux-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D22__GPIO_1_22 + MX28_PAD_LCD_D23__GPIO_1_23 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_pins_cfa10049: mac0-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SS2__GPIO_2_21 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + pca_pins_cfa10049: pca-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SS0__GPIO_2_19 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + rotary_pins_cfa10049: rotary-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_I2C0_SCL__GPIO_3_24 + MX28_PAD_I2C0_SDA__GPIO_3_25 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + rotary_btn_pins_cfa10049: rotary-btn-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SAIF1_SDATA0__GPIO_3_26 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + spi2_pins_cfa10049: spi2-cfa10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SCK__GPIO_2_16 + MX28_PAD_SSP2_MOSI__GPIO_2_17 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + spi3_pins_cfa10049: spi3-cfa10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_RDN__GPIO_0_24 + MX28_PAD_GPMI_RESETN__GPIO_0_28 + MX28_PAD_GPMI_CE1N__GPIO_0_17 + MX28_PAD_GPMI_ALE__GPIO_0_26 + MX28_PAD_GPMI_CLE__GPIO_0_27 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + lcdif_18bit_pins_cfa10049: lcdif-18bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D00__LCD_D0 + MX28_PAD_LCD_D01__LCD_D1 + MX28_PAD_LCD_D02__LCD_D2 + MX28_PAD_LCD_D03__LCD_D3 + MX28_PAD_LCD_D04__LCD_D4 + MX28_PAD_LCD_D05__LCD_D5 + MX28_PAD_LCD_D06__LCD_D6 + MX28_PAD_LCD_D07__LCD_D7 + MX28_PAD_LCD_D08__LCD_D8 + MX28_PAD_LCD_D09__LCD_D9 + MX28_PAD_LCD_D10__LCD_D10 + MX28_PAD_LCD_D11__LCD_D11 + MX28_PAD_LCD_D12__LCD_D12 + MX28_PAD_LCD_D13__LCD_D13 + MX28_PAD_LCD_D14__LCD_D14 + MX28_PAD_LCD_D15__LCD_D15 + MX28_PAD_LCD_D16__LCD_D16 + MX28_PAD_LCD_D17__LCD_D17 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10049: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RESET__GPIO_3_30 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + w1_gpio_pins: w1-gpio@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D21__GPIO_1_21 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */ + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_b>; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + pinctrl-0 = <&usb1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts index fac5bbda7a93..42ba7da48beb 100644 --- a/arch/arm/boot/dts/imx28-cfa10055.dts +++ b/arch/arm/boot/dts/imx28-cfa10055.dts @@ -14,121 +14,6 @@ model = "Crystalfontz CFA-10055 Board"; compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28"; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - spi2_pins_cfa10055: spi2-cfa10055@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SCK__GPIO_2_16 - MX28_PAD_SSP2_MOSI__GPIO_2_17 - MX28_PAD_SSP2_MISO__GPIO_2_18 - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - lcdif_18bit_pins_cfa10055: lcdif-18bit@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D00__LCD_D0 - MX28_PAD_LCD_D01__LCD_D1 - MX28_PAD_LCD_D02__LCD_D2 - MX28_PAD_LCD_D03__LCD_D3 - MX28_PAD_LCD_D04__LCD_D4 - MX28_PAD_LCD_D05__LCD_D5 - MX28_PAD_LCD_D06__LCD_D6 - MX28_PAD_LCD_D07__LCD_D7 - MX28_PAD_LCD_D08__LCD_D8 - MX28_PAD_LCD_D09__LCD_D9 - MX28_PAD_LCD_D10__LCD_D10 - MX28_PAD_LCD_D11__LCD_D11 - MX28_PAD_LCD_D12__LCD_D12 - MX28_PAD_LCD_D13__LCD_D13 - MX28_PAD_LCD_D14__LCD_D14 - MX28_PAD_LCD_D15__LCD_D15 - MX28_PAD_LCD_D16__LCD_D16 - MX28_PAD_LCD_D17__LCD_D17 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10055: lcdif-evk@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RESET__GPIO_3_30 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_18bit_pins_cfa10055 - &lcdif_pins_cfa10055 - &lcdif_pins_cfa10055_pullup>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <18>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <9216000>; - hactive = <320>; - vactive = <480>; - hback-porch = <2>; - hfront-porch = <2>; - vback-porch = <2>; - vfront-porch = <2>; - hsync-len = <15>; - vsync-len = <15>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - fsl,lradc-touchscreen-wires = <4>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pins_b>; - status = "okay"; - }; - }; - }; - spi-2 { compatible = "spi-gpio"; pinctrl-names = "default"; @@ -159,3 +44,112 @@ default-brightness-level = <6>; }; }; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_18bit_pins_cfa10055 + &lcdif_pins_cfa10055 + &lcdif_pins_cfa10055_pullup>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9216000>; + hactive = <320>; + vactive = <480>; + hback-porch = <2>; + hfront-porch = <2>; + vback-porch = <2>; + vfront-porch = <2>; + hsync-len = <15>; + vsync-len = <15>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&lradc { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; +}; + +&pinctrl { + spi2_pins_cfa10055: spi2-cfa10055@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SCK__GPIO_2_16 + MX28_PAD_SSP2_MOSI__GPIO_2_17 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + lcdif_18bit_pins_cfa10055: lcdif-18bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D00__LCD_D0 + MX28_PAD_LCD_D01__LCD_D1 + MX28_PAD_LCD_D02__LCD_D2 + MX28_PAD_LCD_D03__LCD_D3 + MX28_PAD_LCD_D04__LCD_D4 + MX28_PAD_LCD_D05__LCD_D5 + MX28_PAD_LCD_D06__LCD_D6 + MX28_PAD_LCD_D07__LCD_D7 + MX28_PAD_LCD_D08__LCD_D8 + MX28_PAD_LCD_D09__LCD_D9 + MX28_PAD_LCD_D10__LCD_D10 + MX28_PAD_LCD_D11__LCD_D11 + MX28_PAD_LCD_D12__LCD_D12 + MX28_PAD_LCD_D13__LCD_D13 + MX28_PAD_LCD_D14__LCD_D14 + MX28_PAD_LCD_D15__LCD_D15 + MX28_PAD_LCD_D16__LCD_D16 + MX28_PAD_LCD_D17__LCD_D17 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10055: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RESET__GPIO_3_30 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_b>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts index c5f3337e8b39..0e15bdfd7281 100644 --- a/arch/arm/boot/dts/imx28-cfa10056.dts +++ b/arch/arm/boot/dts/imx28-cfa10056.dts @@ -13,81 +13,6 @@ model = "Crystalfontz CFA-10056 Board"; compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28"; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - spi2_pins_cfa10056: spi2-cfa10056@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SCK__GPIO_2_16 - MX28_PAD_SSP2_MOSI__GPIO_2_17 - MX28_PAD_SSP2_MISO__GPIO_2_18 - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - lcdif_pins_cfa10056: lcdif-10056@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RESET__GPIO_3_30 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_cfa10056 - &lcdif_pins_cfa10056_pullup >; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <32000000>; - hactive = <480>; - vactive = <800>; - hback-porch = <2>; - hfront-porch = <2>; - vback-porch = <2>; - vfront-porch = <2>; - hsync-len = <5>; - vsync-len = <5>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - }; - spi-2 { compatible = "spi-gpio"; pinctrl-names = "default"; @@ -111,3 +36,74 @@ }; }; }; + +&pinctrl { + spi2_pins_cfa10056: spi2-cfa10056@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SCK__GPIO_2_16 + MX28_PAD_SSP2_MOSI__GPIO_2_17 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + lcdif_pins_cfa10056: lcdif-10056@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RESET__GPIO_3_30 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_cfa10056 + &lcdif_pins_cfa10056_pullup >; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <32000000>; + hactive = <480>; + vactive = <800>; + hback-porch = <2>; + hfront-porch = <2>; + vback-porch = <2>; + vfront-porch = <2>; + hsync-len = <5>; + vsync-len = <5>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts index 2f7e479dbc74..27602c01f162 100644 --- a/arch/arm/boot/dts/imx28-cfa10057.dts +++ b/arch/arm/boot/dts/imx28-cfa10057.dts @@ -14,126 +14,6 @@ model = "Crystalfontz CFA-10057 Board"; compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28"; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - usb_pins_cfa10057: usb-10057@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_18bit_pins_cfa10057: lcdif-18bit@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D00__LCD_D0 - MX28_PAD_LCD_D01__LCD_D1 - MX28_PAD_LCD_D02__LCD_D2 - MX28_PAD_LCD_D03__LCD_D3 - MX28_PAD_LCD_D04__LCD_D4 - MX28_PAD_LCD_D05__LCD_D5 - MX28_PAD_LCD_D06__LCD_D6 - MX28_PAD_LCD_D07__LCD_D7 - MX28_PAD_LCD_D08__LCD_D8 - MX28_PAD_LCD_D09__LCD_D9 - MX28_PAD_LCD_D10__LCD_D10 - MX28_PAD_LCD_D11__LCD_D11 - MX28_PAD_LCD_D12__LCD_D12 - MX28_PAD_LCD_D13__LCD_D13 - MX28_PAD_LCD_D14__LCD_D14 - MX28_PAD_LCD_D15__LCD_D15 - MX28_PAD_LCD_D16__LCD_D16 - MX28_PAD_LCD_D17__LCD_D17 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10057: lcdif-evk@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_18bit_pins_cfa10057 - &lcdif_pins_cfa10057>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <18>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <30000000>; - hactive = <480>; - vactive = <800>; - hfront-porch = <12>; - hback-porch = <2>; - vfront-porch = <5>; - vback-porch = <3>; - hsync-len = <2>; - vsync-len = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - fsl,lradc-touchscreen-wires = <4>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm4_pins_a>; - status = "okay"; - }; - - i2c1: i2c@8005a000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb1: usb@80090000 { - vbus-supply = <®_usb1_vbus>; - pinctrl-0 = <&usb1_pins_a>; - pinctrl-names = "default"; - status = "okay"; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -151,17 +31,6 @@ }; }; - ahb@80080000 { - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; - phy-reset-duration = <100>; - status = "okay"; - }; - }; - backlight { compatible = "pwm-backlight"; pwms = <&pwm 4 5000000>; @@ -169,3 +38,124 @@ default-brightness-level = <7>; }; }; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_18bit_pins_cfa10057 + &lcdif_pins_cfa10057>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <30000000>; + hactive = <480>; + vactive = <800>; + hfront-porch = <12>; + hback-porch = <2>; + vfront-porch = <5>; + vback-porch = <3>; + hsync-len = <2>; + vsync-len = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&lradc { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; + phy-reset-duration = <100>; + status = "okay"; +}; + +&pinctrl { + usb_pins_cfa10057: usb-10057@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D07__GPIO_0_7 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_18bit_pins_cfa10057: lcdif-18bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D00__LCD_D0 + MX28_PAD_LCD_D01__LCD_D1 + MX28_PAD_LCD_D02__LCD_D2 + MX28_PAD_LCD_D03__LCD_D3 + MX28_PAD_LCD_D04__LCD_D4 + MX28_PAD_LCD_D05__LCD_D5 + MX28_PAD_LCD_D06__LCD_D6 + MX28_PAD_LCD_D07__LCD_D7 + MX28_PAD_LCD_D08__LCD_D8 + MX28_PAD_LCD_D09__LCD_D9 + MX28_PAD_LCD_D10__LCD_D10 + MX28_PAD_LCD_D11__LCD_D11 + MX28_PAD_LCD_D12__LCD_D12 + MX28_PAD_LCD_D13__LCD_D13 + MX28_PAD_LCD_D14__LCD_D14 + MX28_PAD_LCD_D15__LCD_D15 + MX28_PAD_LCD_D16__LCD_D16 + MX28_PAD_LCD_D17__LCD_D17 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10057: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pins_a>; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + pinctrl-0 = <&usb1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts index 4465fd86785a..931c4d089b26 100644 --- a/arch/arm/boot/dts/imx28-cfa10058.dts +++ b/arch/arm/boot/dts/imx28-cfa10058.dts @@ -14,93 +14,6 @@ model = "Crystalfontz CFA-10058 Board"; compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28"; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - usb_pins_cfa10058: usb-10058@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10058: lcdif-10058@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_cfa10058>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <30000000>; - hactive = <800>; - vactive = <480>; - hback-porch = <40>; - hfront-porch = <40>; - vback-porch = <13>; - vfront-porch = <29>; - hsync-len = <8>; - vsync-len = <8>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - fsl,lradc-touchscreen-wires = <4>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pins_b>; - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb1: usb@80090000 { - vbus-supply = <®_usb1_vbus>; - pinctrl-0 = <&usb1_pins_a>; - pinctrl-names = "default"; - status = "okay"; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -118,17 +31,6 @@ }; }; - ahb@80080000 { - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; - phy-reset-duration = <100>; - status = "okay"; - }; - }; - backlight { compatible = "pwm-backlight"; pwms = <&pwm 3 5000000>; @@ -136,3 +38,91 @@ default-brightness-level = <6>; }; }; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_cfa10058>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <40>; + hfront-porch = <40>; + vback-porch = <13>; + vfront-porch = <29>; + hsync-len = <8>; + vsync-len = <8>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&lradc { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; + phy-reset-duration = <100>; + status = "okay"; +}; + +&pinctrl { + usb_pins_cfa10058: usb-10058@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D07__GPIO_0_7 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10058: lcdif-10058@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_b>; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + pinctrl-0 = <&usb1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/imx28-duckbill-2-485.dts index d451fa018d83..b73020ff1053 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-485.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-485.dts @@ -5,172 +5,13 @@ */ /dts-v1/; -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/gpio/gpio.h> -#include "imx28.dtsi" +#include "imx28-duckbill-2.dts" / { model = "I2SE Duckbill 2 485"; compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28"; - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x08000000>; - }; - - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; - vmmc-supply = <®_3p3v>; - status = "okay"; - non-removable; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_4bit_pins_b - &mmc2_cd_cfg &mmc2_sck_cfg_b>; - bus-width = <4>; - vmmc-supply = <®_3p3v>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_reset_pin: mac0-phy-reset@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_int_pin: mac0-phy-int@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins: leds@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SAIF0_MCLK__GPIO_3_20 - MX28_PAD_SAIF0_LRCLK__GPIO_3_21 - MX28_PAD_I2C0_SCL__GPIO_3_24 - MX28_PAD_I2C0_SDA__GPIO_3_25 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - status = "okay"; - dr_mode = "peripheral"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; - phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - phy-reset-duration = <25>; - phy-handle = <ðphy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_phy_int_pin>; - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - max-speed = <100>; - }; - }; - }; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins>; - - status-red { - label = "duckbill:red:status"; - gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - - status-green { - label = "duckbill:green:status"; - gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - rs485-red { label = "duckbill:red:rs485"; gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; @@ -182,3 +23,16 @@ }; }; }; + +&i2c0 { + status = "disabled"; +}; + +&led_pins { + fsl,pinmux-ids = < + MX28_PAD_SAIF0_MCLK__GPIO_3_20 + MX28_PAD_SAIF0_LRCLK__GPIO_3_21 + MX28_PAD_I2C0_SCL__GPIO_3_24 + MX28_PAD_I2C0_SDA__GPIO_3_25 + >; +}; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts index 73f521c46c1e..473d99b9b42f 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts @@ -5,184 +5,14 @@ */ /dts-v1/; -#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/gpio.h> -#include "imx28.dtsi" +#include "imx28-duckbill-2.dts" / { model = "I2SE Duckbill 2 EnOcean"; compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28"; - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x08000000>; - }; - - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; - vmmc-supply = <®_3p3v>; - status = "okay"; - non-removable; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_4bit_pins_b - &mmc2_cd_cfg &mmc2_sck_cfg_b>; - bus-width = <4>; - vmmc-supply = <®_3p3v>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_reset_pin: mac0-phy-reset@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_int_pin: mac0-phy-int@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins: leds@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SAIF0_MCLK__GPIO_3_20 - MX28_PAD_SAIF0_LRCLK__GPIO_3_21 - MX28_PAD_AUART0_CTS__GPIO_3_2 - MX28_PAD_I2C0_SCL__GPIO_3_24 - MX28_PAD_I2C0_SDA__GPIO_3_25 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - enocean_button: enocean-button@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_AUART0_RTS__GPIO_3_3 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - status = "okay"; - dr_mode = "peripheral"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; - phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - phy-reset-duration = <25>; - phy-handle = <ðphy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_phy_int_pin>; - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - max-speed = <100>; - }; - }; - }; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins>; - - status-red { - label = "duckbill:red:status"; - gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - - status-green { - label = "duckbill:green:status"; - gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - enocean-blue { label = "duckbill:blue:enocean"; gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; @@ -211,3 +41,29 @@ }; }; }; + +&i2c0 { + status = "disabled"; +}; + +&led_pins { + fsl,pinmux-ids = < + MX28_PAD_SAIF0_MCLK__GPIO_3_20 + MX28_PAD_SAIF0_LRCLK__GPIO_3_21 + MX28_PAD_AUART0_CTS__GPIO_3_2 + MX28_PAD_I2C0_SCL__GPIO_3_24 + MX28_PAD_I2C0_SDA__GPIO_3_25 + >; +}; + +&pinctrl { + enocean_button: enocean-button@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART0_RTS__GPIO_3_3 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts index 0e8be5975709..859d97a5a775 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts @@ -5,9 +5,7 @@ */ /dts-v1/; -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/gpio/gpio.h> -#include "imx28.dtsi" +#include "imx28-duckbill-2.dts" / { model = "I2SE Duckbill 2 SPI"; @@ -16,179 +14,50 @@ aliases { ethernet1 = &qca7000; }; +}; - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x08000000>; - }; - - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; - vmmc-supply = <®_3p3v>; - status = "okay"; - non-removable; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - - qca7000: ethernet@0 { - reg = <0>; - compatible = "qca,qca7000"; - pinctrl-names = "default"; - pinctrl-0 = <&qca7000_pins>; - interrupt-parent = <&gpio3>; - interrupts = <3 IRQ_TYPE_EDGE_RISING>; - spi-cpha; - spi-cpol; - spi-max-frequency = <8000000>; - }; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_reset_pin: mac0-phy-reset@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_int_pin: mac0-phy-int@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins: led@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SAIF0_MCLK__GPIO_3_20 - MX28_PAD_SAIF0_LRCLK__GPIO_3_21 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - qca7000_pins: qca7000@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_AUART0_RTS__GPIO_3_3 /* Interrupt */ - MX28_PAD_LCD_D13__GPIO_1_13 /* QCA7K reset */ - MX28_PAD_LCD_D14__GPIO_1_14 /* GPIO 0 */ - MX28_PAD_LCD_D15__GPIO_1_15 /* GPIO 1 */ - MX28_PAD_LCD_D18__GPIO_1_18 /* GPIO 2 */ - MX28_PAD_LCD_D21__GPIO_1_21 /* GPIO 3 */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - status = "okay"; - dr_mode = "peripheral"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; - phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - phy-reset-duration = <25>; - phy-handle = <ðphy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; +&auart0 { + status = "disabled"; +}; - ethphy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_phy_int_pin>; - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - max-speed = <100>; - }; - }; - }; - }; +&i2c0 { + status = "disabled"; +}; - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; +&pinctrl { + qca7000_pins: qca7000@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART0_RTS__GPIO_3_3 /* Interrupt */ + MX28_PAD_LCD_D13__GPIO_1_13 /* QCA7K reset */ + MX28_PAD_LCD_D14__GPIO_1_14 /* GPIO 0 */ + MX28_PAD_LCD_D15__GPIO_1_15 /* GPIO 1 */ + MX28_PAD_LCD_D18__GPIO_1_18 /* GPIO 2 */ + MX28_PAD_LCD_D21__GPIO_1_21 /* GPIO 3 */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; +}; - leds { - compatible = "gpio-leds"; +&ssp2 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + /delete-property/ bus-width; + /delete-property/ vmmc-supply; + status = "okay"; + + qca7000: ethernet@0 { + reg = <0>; + compatible = "qca,qca7000"; pinctrl-names = "default"; - pinctrl-0 = <&led_pins>; - - status-red { - label = "duckbill:red:status"; - gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - - status-green { - label = "duckbill:green:status"; - gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; + pinctrl-0 = <&qca7000_pins>; + interrupt-parent = <&gpio3>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + spi-cpha; + spi-cpol; + spi-max-frequency = <8000000>; }; }; diff --git a/arch/arm/boot/dts/imx28-duckbill-2.dts b/arch/arm/boot/dts/imx28-duckbill-2.dts index 23fd3036404d..4e28212e9626 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2.dts @@ -18,138 +18,6 @@ reg = <0x40000000 0x08000000>; }; - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; - vmmc-supply = <®_3p3v>; - status = "okay"; - non-removable; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_4bit_pins_b - &mmc2_cd_cfg &mmc2_sck_cfg_b>; - bus-width = <4>; - vmmc-supply = <®_3p3v>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_reset_pin: mac0-phy-reset@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_int_pin: mac0-phy-int@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins: leds@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SAIF0_MCLK__GPIO_3_20 - MX28_PAD_SAIF0_LRCLK__GPIO_3_21 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - status = "okay"; - }; - - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - status = "okay"; - dr_mode = "peripheral"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; - phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - phy-reset-duration = <25>; - phy-handle = <ðphy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_phy_int_pin>; - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - max-speed = <100>; - }; - }; - }; - }; - reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "3P3V"; @@ -176,3 +44,127 @@ }; }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&lradc { + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; + phy-supply = <®_3p3v>; + phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_phy_int_pin>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + max-speed = <100>; + }; + }; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_phy_reset_pin: mac0-phy-reset@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_phy_int_pin: mac0-phy-int@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + led_pins: leds@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SAIF0_MCLK__GPIO_3_20 + MX28_PAD_SAIF0_LRCLK__GPIO_3_21 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <8>; + vmmc-supply = <®_3p3v>; + status = "okay"; + non-removable; +}; + +&ssp2 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_b + &mmc2_cd_cfg &mmc2_sck_cfg_b>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "peripheral"; +}; + +&usbphy0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts index c666afb12445..13ffd533fdea 100644 --- a/arch/arm/boot/dts/imx28-duckbill.dts +++ b/arch/arm/boot/dts/imx28-duckbill.dts @@ -17,108 +17,6 @@ reg = <0x40000000 0x08000000>; }; - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <4>; - vmmc-supply = <®_3p3v>; - status = "okay"; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_reset_pin: mac0-phy-reset@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins: leds@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_AUART1_RX__GPIO_3_4 - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - status = "okay"; - }; - - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - status = "okay"; - dr_mode = "peripheral"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; - phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; - phy-reset-duration = <25>; - status = "okay"; - }; - }; - reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "3P3V"; @@ -145,3 +43,97 @@ }; }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&lradc { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; + phy-supply = <®_3p3v>; + phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_phy_reset_pin: mac0-phy-reset@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + led_pins: leds@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART1_RX__GPIO_3_4 + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&ssp2 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; +}; + +&usb0 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 1053b7c584d8..783abb82b2a8 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -95,266 +95,258 @@ }; }; - apb@80000000 { - apbh@80000000 { - nand-controller@8000c000 { - pinctrl-names = "default"; - pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg - &gpmi_pins_evk>; - status = "okay"; - }; + sound { + compatible = "fsl,imx28-evk-sgtl5000", + "fsl,mxs-audio-sgtl5000"; + model = "imx28-evk-sgtl5000"; + saif-controllers = <&saif0 &saif1>; + audio-codec = <&sgtl5000>; + }; - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; - wp-gpios = <&gpio2 12 0>; - vmmc-supply = <®_vddio_sd0>; - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pin_gpio3_5>; - ssp1: spi@80012000 { - compatible = "fsl,imx28-mmc"; - bus-width = <8>; - wp-gpios = <&gpio0 28 0>; - }; + user { + label = "Heartbeat"; + gpios = <&gpio3 5 0>; + linux,default-trigger = "heartbeat"; + }; + }; - ssp2: spi@80014000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - - flash: flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "sst,sst25vf016b", "jedec,spi-nor"; - spi-max-frequency = <40000000>; - reg = <0>; - }; - }; + backlight_display: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 2 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; +}; - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP1_CMD__GPIO_2_13 - MX28_PAD_SSP1_DATA3__GPIO_2_15 - MX28_PAD_ENET0_RX_CLK__GPIO_4_13 - MX28_PAD_SSP1_SCK__GPIO_2_12 - MX28_PAD_PWM3__GPIO_3_28 - MX28_PAD_LCD_RESET__GPIO_3_30 - MX28_PAD_AUART2_RX__GPIO_3_8 - MX28_PAD_AUART2_TX__GPIO_3_9 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pin_gpio3_5: led_gpio3_5@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - gpmi_pins_evk: gpmi-nand-evk@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_CE1N__GPMI_CE1N - MX28_PAD_GPMI_RDY1__GPMI_READY1 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_evk: lcdif-evk@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + uart-has-rtscts; + status = "okay"; +}; - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_evk>; - status = "okay"; - - port { - display_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; +&auart3 { + pinctrl-names = "default"; + pinctrl-0 = <&auart3_pins_a>; + status = "okay"; +}; - can0: can@80032000 { - pinctrl-names = "default"; - pinctrl-0 = <&can0_pins_a>; - xceiver-supply = <®_can_3v3>; - status = "okay"; - }; +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + xceiver-supply = <®_can_3v3>; + status = "okay"; +}; - can1: can@80034000 { - pinctrl-names = "default"; - pinctrl-0 = <&can1_pins_a>; - xceiver-supply = <®_can_3v3>; - status = "okay"; - }; - }; +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins_a>; + xceiver-supply = <®_can_3v3>; + status = "okay"; +}; - apbx@80040000 { - saif0: saif@80042000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif0_pins_a>; - status = "okay"; - }; +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; - saif1: saif@80046000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif1_pins_a>; - fsl,saif-master = <&saif0>; - status = "okay"; - }; +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg + &gpmi_pins_evk>; + status = "okay"; +}; - lradc@80050000 { - status = "okay"; - fsl,lradc-touchscreen-wires = <4>; - fsl,ave-ctrl = <4>; - fsl,ave-delay = <2>; - fsl,settling = <10>; - }; +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_evk>; + status = "okay"; - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - sgtl5000: codec@a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - #sound-dai-cells = <0>; - VDDA-supply = <®_3p3v>; - VDDIO-supply = <®_3p3v>; - clocks = <&saif0>; - }; - - at24@51 { - compatible = "atmel,24c32"; - pagesize = <32>; - reg = <0x51>; - }; - }; + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm2_pins_a>; - status = "okay"; - }; +&lradc { + fsl,lradc-touchscreen-wires = <4>; + fsl,ave-ctrl = <4>; + fsl,ave-delay = <2>; + fsl,settling = <10>; + status = "okay"; +}; - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + clocks = <&saif0>; + }; - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_pins_a>; - uart-has-rtscts; - status = "okay"; - }; + at24@51 { + compatible = "atmel,24c32"; + pagesize = <32>; + reg = <0x51>; + }; +}; - auart3: serial@80070000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart3_pins_a>; - status = "okay"; - }; +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-supply = <®_fec_3v3>; + phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; + phy-reset-duration = <100>; + status = "okay"; +}; - usbphy0: usbphy@8007c000 { - status = "okay"; - }; +&mac1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; +}; - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - }; +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP1_CMD__GPIO_2_13 + MX28_PAD_SSP1_DATA3__GPIO_2_15 + MX28_PAD_ENET0_RX_CLK__GPIO_4_13 + MX28_PAD_SSP1_SCK__GPIO_2_12 + MX28_PAD_PWM3__GPIO_3_28 + MX28_PAD_LCD_RESET__GPIO_3_30 + MX28_PAD_AUART2_RX__GPIO_3_8 + MX28_PAD_AUART2_TX__GPIO_3_9 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; - ahb@80080000 { - usb0: usb@80080000 { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_pins_a>; - vbus-supply = <®_usb0_vbus>; - status = "okay"; - }; - - usb1: usb@80090000 { - vbus-supply = <®_usb1_vbus>; - status = "okay"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - phy-supply = <®_fec_3v3>; - phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; - phy-reset-duration = <100>; - status = "okay"; - }; + led_pin_gpio3_5: led_gpio3_5@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; - mac1: ethernet@800f4000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac1_pins_a>; - status = "okay"; - }; + gpmi_pins_evk: gpmi-nand-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_CE1N__GPMI_CE1N + MX28_PAD_GPMI_RDY1__GPMI_READY1 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; - sound { - compatible = "fsl,imx28-evk-sgtl5000", - "fsl,mxs-audio-sgtl5000"; - model = "imx28-evk-sgtl5000"; - saif-controllers = <&saif0 &saif1>; - audio-codec = <&sgtl5000>; + lcdif_pins_evk: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; +}; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pin_gpio3_5>; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins_a>; + status = "okay"; +}; - user { - label = "Heartbeat"; - gpios = <&gpio3 5 0>; - linux,default-trigger = "heartbeat"; - }; - }; +&saif0 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; +}; - backlight_display: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 2 5000000>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; +&saif1 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <8>; + wp-gpios = <&gpio2 12 0>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; +}; + +&ssp1 { + compatible = "fsl,imx28-mmc"; + bus-width = <8>; + wp-gpios = <&gpio0 28 0>; +}; + +&ssp2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + flash: flash@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25vf016b", "jedec,spi-nor"; + spi-max-frequency = <40000000>; }; }; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_pins_a>; + vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi index 2bdb4c093545..c08b14ad7cd5 100644 --- a/arch/arm/boot/dts/imx28-m28.dtsi +++ b/arch/arm/boot/dts/imx28-m28.dtsi @@ -14,31 +14,6 @@ reg = <0x40000000 0x08000000>; }; - apb@80000000 { - apbh@80000000 { - nand-controller@8000c000 { - #address-cells = <1>; - #size-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; - status = "okay"; - }; - }; - - apbx@80040000 { - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - rtc: rtc@68 { - compatible = "st,m41t62"; - reg = <0x68>; - }; - }; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -54,3 +29,22 @@ }; }; }; + +&gpmi { + #address-cells = <1>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + rtc: rtc@68 { + compatible = "st,m41t62"; + reg = <0x68>; + }; +}; diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts index 865ac3d573c7..6b01de9efd02 100644 --- a/arch/arm/boot/dts/imx28-m28cu3.dts +++ b/arch/arm/boot/dts/imx28-m28cu3.dts @@ -15,187 +15,6 @@ reg = <0x40000000 0x08000000>; }; - apb@80000000 { - apbh@80000000 { - nand-controller@8000c000 { - #address-cells = <1>; - #size-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; - status = "okay"; - - partition@0 { - label = "gpmi-nfc-0-boot"; - reg = <0x00000000 0x01400000>; - read-only; - }; - - partition@1 { - label = "gpmi-nfc-general-use"; - reg = <0x01400000 0x0ec00000>; - }; - }; - - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a - &mmc0_cd_cfg - &mmc0_sck_cfg>; - bus-width = <4>; - vmmc-supply = <®_vddio_sd0>; - status = "okay"; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_4bit_pins_a - &mmc2_cd_cfg - &mmc2_sck_cfg_a>; - bus-width = <4>; - vmmc-supply = <®_vddio_sd1>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SS0__GPIO_2_19 - MX28_PAD_PWM4__GPIO_3_29 - MX28_PAD_AUART2_RX__GPIO_3_8 - MX28_PAD_ENET0_RX_CLK__GPIO_4_13 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_m28: lcdif-m28@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_VSYNC__LCD_VSYNC - MX28_PAD_LCD_HSYNC__LCD_HSYNC - MX28_PAD_LCD_DOTCLK__LCD_DOTCLK - MX28_PAD_LCD_RESET__LCD_RESET - MX28_PAD_LCD_CS__LCD_ENABLE - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins_gpio: leds-m28@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP3_MISO__GPIO_2_26 - MX28_PAD_SSP3_SCK__GPIO_2_24 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - - ocotp@8002c000 { - status = "okay"; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_m28>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <6410256>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hfront-porch = <20>; - vback-porch = <15>; - vfront-porch = <5>; - hsync-len = <30>; - vsync-len = <3>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - - apbx@80040000 { - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_b>; - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; - }; - - auart3: serial@80070000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart3_2pins_b>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pins_a>; - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb1: usb@80090000 { - vbus-supply = <®_usb1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins_a>; - disable-over-current; - status = "okay"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; - phy-reset-duration = <100>; - status = "okay"; - }; - - mac1: ethernet@800f4000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac1_pins_a>; - status = "okay"; - }; - }; - backlight { compatible = "pwm-backlight"; pwms = <&pwm 3 5000000>; @@ -264,3 +83,176 @@ }; }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; +}; + +&auart3 { + pinctrl-names = "default"; + pinctrl-0 = <&auart3_2pins_b>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_b>; + status = "okay"; +}; + +&gpmi { + #address-cells = <1>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; + + partition@0 { + label = "gpmi-nfc-0-boot"; + reg = <0x00000000 0x01400000>; + read-only; + }; + + partition@1 { + label = "gpmi-nfc-general-use"; + reg = <0x01400000 0x0ec00000>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_m28>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <6410256>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hfront-porch = <20>; + vback-porch = <15>; + vfront-porch = <5>; + hsync-len = <30>; + vsync-len = <3>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; + phy-reset-duration = <100>; + status = "okay"; +}; + +&mac1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; +}; + +&ocotp { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SS0__GPIO_2_19 + MX28_PAD_PWM4__GPIO_3_29 + MX28_PAD_AUART2_RX__GPIO_3_8 + MX28_PAD_ENET0_RX_CLK__GPIO_4_13 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_m28: lcdif-m28@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_VSYNC__LCD_VSYNC + MX28_PAD_LCD_HSYNC__LCD_HSYNC + MX28_PAD_LCD_DOTCLK__LCD_DOTCLK + MX28_PAD_LCD_RESET__LCD_RESET + MX28_PAD_LCD_CS__LCD_ENABLE + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + led_pins_gpio: leds-m28@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP3_MISO__GPIO_2_26 + MX28_PAD_SSP3_SCK__GPIO_2_24 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_a>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg + &mmc0_sck_cfg>; + bus-width = <4>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; +}; + +&ssp2 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_a + &mmc2_cd_cfg + &mmc2_sck_cfg_a>; + bus-width = <4>; + vmmc-supply = <®_vddio_sd1>; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_a>; + disable-over-current; + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 13acdc7916b9..e350d57a4cec 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -11,220 +11,6 @@ model = "Aries/DENX M28EVK"; compatible = "aries,m28evk", "denx,m28evk", "fsl,imx28"; - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg - &mmc0_sck_cfg>; - bus-width = <8>; - wp-gpios = <&gpio3 10 0>; - vmmc-supply = <®_vddio_sd0>; - status = "okay"; - }; - - ssp2: spi@80014000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - - flash: flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "m25p80", "jedec,spi-nor"; - spi-max-frequency = <40000000>; - reg = <0>; - }; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_PWM3__GPIO_3_28 - MX28_PAD_AUART2_CTS__GPIO_3_10 - MX28_PAD_AUART2_RTS__GPIO_3_11 - MX28_PAD_AUART3_RX__GPIO_3_12 - MX28_PAD_AUART3_TX__GPIO_3_13 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_m28: lcdif-m28@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_DOTCLK__LCD_DOTCLK - MX28_PAD_LCD_ENABLE__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_m28>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <16>; - bus-width = <18>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <33260000>; - hactive = <800>; - vactive = <480>; - hback-porch = <0>; - hfront-porch = <256>; - vback-porch = <0>; - vfront-porch = <45>; - hsync-len = <1>; - vsync-len = <1>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - - can0: can@80032000 { - pinctrl-names = "default"; - pinctrl-0 = <&can0_pins_a>; - status = "okay"; - }; - - can1: can@80034000 { - pinctrl-names = "default"; - pinctrl-0 = <&can1_pins_a>; - status = "okay"; - }; - }; - - apbx@80040000 { - saif0: saif@80042000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif0_pins_a>; - status = "okay"; - }; - - saif1: saif@80046000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif1_pins_a>; - fsl,saif-master = <&saif0>; - status = "okay"; - }; - - i2c0: i2c@80058000 { - sgtl5000: codec@a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - #sound-dai-cells = <0>; - VDDA-supply = <®_3p3v>; - VDDIO-supply = <®_3p3v>; - clocks = <&saif0>; - }; - - eeprom: eeprom@51 { - compatible = "atmel,24c128"; - reg = <0x51>; - pagesize = <32>; - }; - }; - - lradc@80050000 { - status = "okay"; - fsl,lradc-touchscreen-wires = <4>; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_pins_a>; - status = "okay"; - }; - - auart1: serial@8006c000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart1_pins_a>; - status = "okay"; - }; - - auart2: serial@8006e000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart2_2pins_b>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm4_pins_a>; - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - vbus-supply = <®_usb0_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&usb0_pins_a>; - status = "okay"; - }; - - usb1: usb@80090000 { - vbus-supply = <®_usb1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins_a>; - status = "okay"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - clocks = <&clks 57>, <&clks 57>; - clock-names = "ipg", "ahb"; - status = "okay"; - }; - - mac1: ethernet@800f4000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac1_pins_a>; - status = "okay"; - }; - }; - backlight { compatible = "pwm-backlight"; pwms = <&pwm 4 5000000>; @@ -269,3 +55,209 @@ audio-codec = <&sgtl5000>; }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; +}; + +&auart1 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_pins_a>; + status = "okay"; +}; + +&auart2 { + pinctrl-names = "default"; + pinctrl-0 = <&auart2_2pins_b>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&i2c0 { + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + clocks = <&saif0>; + }; + + eeprom: eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + pagesize = <32>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_m28>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <16>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33260000>; + hactive = <800>; + vactive = <480>; + hback-porch = <0>; + hfront-porch = <256>; + vback-porch = <0>; + vfront-porch = <45>; + hsync-len = <1>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&lradc { + status = "okay"; + fsl,lradc-touchscreen-wires = <4>; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins_a>; + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + clocks = <&clks 57>, <&clks 57>; + clock-names = "ipg", "ahb"; + status = "okay"; +}; + +&mac1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_PWM3__GPIO_3_28 + MX28_PAD_AUART2_CTS__GPIO_3_10 + MX28_PAD_AUART2_RTS__GPIO_3_11 + MX28_PAD_AUART3_RX__GPIO_3_12 + MX28_PAD_AUART3_TX__GPIO_3_13 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_m28: lcdif-m28@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_DOTCLK__LCD_DOTCLK + MX28_PAD_LCD_ENABLE__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pins_a>; + status = "okay"; +}; + +&saif0 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; +}; + +&saif1 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a + &mmc0_cd_cfg + &mmc0_sck_cfg>; + bus-width = <8>; + wp-gpios = <&gpio3 10 0>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; +}; + +&ssp2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80", "jedec,spi-nor"; + spi-max-frequency = <40000000>; + reg = <0>; + }; +}; + +&usb0 { + vbus-supply = <®_usb0_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins_a>; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_a>; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts index 90928db0df70..5d74a68c56ff 100644 --- a/arch/arm/boot/dts/imx28-sps1.dts +++ b/arch/arm/boot/dts/imx28-sps1.dts @@ -15,111 +15,6 @@ reg = <0x40000000 0x08000000>; }; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog-gpios@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D00__GPIO_0_0 - MX28_PAD_GPMI_D03__GPIO_0_3 - MX28_PAD_GPMI_D06__GPIO_0_6 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - }; - - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a>; - bus-width = <4>; - status = "okay"; - }; - - ssp2: spi@80014000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - - flash: flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "everspin,mr25h256", "mr25h256"; - spi-max-frequency = <40000000>; - reg = <0>; - }; - }; - }; - - apbx@80040000 { - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - rtc: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - - eeprom: eeprom@52 { - compatible = "atmel,24c64"; - reg = <0x52>; - pagesize = <32>; - }; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_pins_a>; - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - vbus-supply = <®_usb0_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&usb0_pins_b>; - status = "okay"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - status = "okay"; - }; - - mac1: ethernet@800f4000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac1_pins_a>; - status = "okay"; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -164,3 +59,99 @@ }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + rtc: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + eeprom: eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + pagesize = <32>; + }; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + status = "okay"; +}; + +&mac1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D00__GPIO_0_0 + MX28_PAD_GPMI_D03__GPIO_0_3 + MX28_PAD_GPMI_D06__GPIO_0_6 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a>; + bus-width = <4>; + status = "okay"; +}; + +&ssp2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "everspin,mr25h256", "mr25h256"; + spi-max-frequency = <40000000>; + reg = <0>; + }; +}; + +&usb0 { + vbus-supply = <®_usb0_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins_b>; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts index 0d58da1c0cc5..ae6ed5c41be3 100644 --- a/arch/arm/boot/dts/imx28-ts4600.dts +++ b/arch/arm/boot/dts/imx28-ts4600.dts @@ -18,50 +18,6 @@ reg = <0x40000000 0x10000000>; /* 256MB */ }; - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a - &mmc0_sck_cfg - &en_sd_pwr>; - broken-cd; - bus-width = <4>; - vmmc-supply = <®_vddio_sd0>; - status = "okay"; - }; - - pinctrl@80018000 { - - en_sd_pwr: en-sd-pwr@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_PWM3__GPIO_3_28 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - }; - }; - - apbx@80040000 { - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm2_pins_a>; - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - }; - }; - reg_vddio_sd0: regulator-vddio-sd0 { compatible = "regulator-fixed"; regulator-name = "vddio-sd0"; @@ -72,3 +28,39 @@ }; }; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&pinctrl { + en_sd_pwr: en-sd-pwr@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_PWM3__GPIO_3_28 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins_a>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_sck_cfg + &en_sd_pwr>; + broken-cd; + bus-width = <4>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index 096f246032c6..ffe58c7093e1 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2012 Shawn Guo <shawn.guo@linaro.org> * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-alti6p.dts b/arch/arm/boot/dts/imx6dl-alti6p.dts index e8325fd680d9..e6a4e2770640 100644 --- a/arch/arm/boot/dts/imx6dl-alti6p.dts +++ b/arch/arm/boot/dts/imx6dl-alti6p.dts @@ -22,6 +22,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; i2c2-mux { @@ -191,6 +192,13 @@ status = "okay"; }; +&clks { + clocks = <&clock_ksz8081>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clock_ksz8081>; +}; + &ecspi1 { cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -208,10 +216,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clock_ksz8081>; - clock-names = "ipg", "ahb", "ptp"; status = "okay"; mdio { diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts index 864dc5018451..33825b5a8f26 100644 --- a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts +++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts @@ -28,6 +28,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; reg_usb_h1_vbus: regulator-usb-h1-vbus { @@ -64,6 +65,13 @@ status = "okay"; }; +&clks { + clocks = <&rmii_clk>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&rmii_clk>; +}; + &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; @@ -297,11 +305,6 @@ phy-mode = "rmii"; phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; phy-handle = <&phy>; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&rmii_clk>, - <&clks IMX6QDL_CLK_ENET_REF>; - clock-names = "ipg", "ahb", "ptp", "enet_out"; status = "okay"; mdio { diff --git a/arch/arm/boot/dts/imx6dl-lanmcu.dts b/arch/arm/boot/dts/imx6dl-lanmcu.dts index 6b6e6fcdea9c..fa823988312d 100644 --- a/arch/arm/boot/dts/imx6dl-lanmcu.dts +++ b/arch/arm/boot/dts/imx6dl-lanmcu.dts @@ -21,6 +21,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; backlight: backlight { @@ -109,14 +110,17 @@ status = "okay"; }; +&clks { + clocks = <&clock_ksz8081>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clock_ksz8081>; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clock_ksz8081>; - clock-names = "ipg", "ahb", "ptp"; phy-handle = <&rgmii_phy>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-plybas.dts b/arch/arm/boot/dts/imx6dl-plybas.dts index c52e6caf3996..e98046eea7a4 100644 --- a/arch/arm/boot/dts/imx6dl-plybas.dts +++ b/arch/arm/boot/dts/imx6dl-plybas.dts @@ -75,6 +75,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; reg_5v0: regulator-5v0 { @@ -99,6 +100,13 @@ status = "okay"; }; +&clks { + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clk50m_phy>; +}; + &ecspi1 { cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -116,10 +124,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clk50m_phy>; - clock-names = "ipg", "ahb", "ptp"; phy-handle = <&rgmii_phy>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/imx6dl-plym2m.dts index 522660c912a0..e3c10483f33b 100644 --- a/arch/arm/boot/dts/imx6dl-plym2m.dts +++ b/arch/arm/boot/dts/imx6dl-plym2m.dts @@ -84,6 +84,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; reg_3v3: regulator-3v3 { @@ -173,6 +174,13 @@ status = "okay"; }; +&clks { + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clk50m_phy>; +}; + &ecspi1 { cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -254,10 +262,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clk50m_phy>; - clock-names = "ipg", "ahb", "ptp"; phy-handle = <&rgmii_phy>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-prtmvt.dts b/arch/arm/boot/dts/imx6dl-prtmvt.dts index 1f8cddd83ccb..5f4fa796ca18 100644 --- a/arch/arm/boot/dts/imx6dl-prtmvt.dts +++ b/arch/arm/boot/dts/imx6dl-prtmvt.dts @@ -193,6 +193,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; reg_1v8: regulator-1v8 { @@ -293,8 +294,10 @@ }; &clks { - assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>; + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, <&clk50m_phy>; }; &ecspi1 { @@ -314,10 +317,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clk50m_phy>; - clock-names = "ipg", "ahb", "ptp"; phy-handle = <&rmii_phy>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts index 72df1dba83be..23274be08e61 100644 --- a/arch/arm/boot/dts/imx6dl-victgo.dts +++ b/arch/arm/boot/dts/imx6dl-victgo.dts @@ -54,6 +54,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; rotary-encoder { @@ -134,6 +135,13 @@ }; }; +&clks { + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clk50m_phy>; +}; + &ecspi2 { cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -182,10 +190,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clk50m_phy>; - clock-names = "ipg", "ahb", "ptp"; phy-handle = <&rmii_phy>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index aacbf317feea..3be38a3c4bb1 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -98,7 +98,6 @@ regulator-max-microvolt = <5000000>; gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; - status = "okay"; }; }; @@ -106,8 +105,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; - phy-reset-duration = <20>; phy-supply = <&sw2_reg>; status = "okay"; @@ -131,6 +128,7 @@ switch@10 { compatible = "qca,qca8334"; reg = <10>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; switch_ports: ports { #address-cells = <1>; @@ -270,9 +268,9 @@ compatible = "ti,lp5562"; reg = <0x30>; clock-mode = /bits/ 8 <1>; - status = "disabled"; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; led@0 { chan-name = "R"; @@ -303,7 +301,6 @@ compatible = "atmel,24c128"; reg = <0x57>; pagesize = <64>; - status = "okay"; }; touchscreen: touchscreen@5c { @@ -313,7 +310,7 @@ interrupt-parent = <&gpio4>; interrupts = <5 IRQ_TYPE_EDGE_FALLING>; attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>; - reset-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; touchscreen-size-x = <800>; touchscreen-size-y = <480>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-lynx.dts b/arch/arm/boot/dts/imx6dl-yapp4-lynx.dts new file mode 100644 index 000000000000..5c2cd517589b --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-yapp4-lynx.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2021 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6dl-yapp43-common.dtsi" + +/ { + model = "Y Soft IOTA Lynx i.MX6DualLite board"; + compatible = "ysoft,imx6dl-yapp4-lynx", "fsl,imx6dl"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; +}; + +&backlight { + status = "okay"; +}; + +&lcd_display { + status = "okay"; +}; + +&leds { + status = "okay"; +}; + +&panel { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&touchscreen { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts b/arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts new file mode 100644 index 000000000000..e0292f11d03e --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2021 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6dl-yapp43-common.dtsi" + +/ { + model = "Y Soft IOTA Phoenix i.MX6DualLite board"; + compatible = "ysoft,imx6dl-yapp4-phoenix", "fsl,imx6dl"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; +}; + +&aliases { + /delete-property/ ethernet1; +}; + +&gpio_keys { + status = "okay"; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&switch_ports { + /delete-node/ port@2; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-yapp43-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp43-common.dtsi new file mode 100644 index 000000000000..52a0f6ee426f --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-yapp43-common.dtsi @@ -0,0 +1,615 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2021 Y Soft Corporation, a.s. + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + aliases: aliases { + ethernet1 = ð1; + ethernet2 = ð2; + mmc0 = &usdhc3; + mmc1 = &usdhc4; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 32 64 128 255>; + default-brightness-level = <32>; + num-interpolated-steps = <8>; + power-supply = <&sw2_reg>; + status = "disabled"; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + status = "disabled"; + + button { + label = "Factory RESET"; + linux,code = <BTN_0>; + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + }; + }; + + lcd_display: display { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1>; + status = "disabled"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel: panel { + compatible = "dataimage,scf0700c48ggu18"; + power-supply = <&sw2_reg>; + backlight = <&backlight>; + enable-gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; + status = "disabled"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-supply = <&sw2_reg>; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "marvell,mv88e6085"; + reg = <0>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + + switch_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: port@0 { + reg = <0>; + label = "cpu"; + phy-mode = "rgmii-id"; + ethernet = <&fec>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + eth2: port@1 { + reg = <1>; + label = "eth2"; + phy-handle = <&phy_port1>; + }; + + eth1: port@2 { + reg = <2>; + label = "eth1"; + phy-handle = <&phy_port2>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: switchphy@11 { + reg = <0x11>; + }; + + phy_port2: switchphy@12 { + reg = <0x12>; + }; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@8 { + compatible = "fsl,pfuze200"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + reg = <0x8>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vsnvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + leds: led-controller@30 { + compatible = "ti,lp5562"; + reg = <0x30>; + clock-mode = /bits/ 8 <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + led@0 { + chan-name = "R"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + chan-name = "G"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@2 { + chan-name = "B"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + + eeprom@57 { + compatible = "atmel,24c128"; + reg = <0x57>; + pagesize = <64>; + }; + + touchscreen: touchscreen@5c { + compatible = "pixcir,pixcir_tangoc"; + reg = <0x5c>; + pinctrl-0 = <&pinctrl_touch>; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + status = "disabled"; + }; + + rtc: rtc@68 { + compatible = "dallas,ds1341"; + reg = <0x68>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "disabled"; + + oled_1309: oled@3c { + compatible = "solomon,ssd1309fb-i2c"; + reg = <0x3c>; + solomon,height = <64>; + solomon,width = <128>; + solomon,page-offset = <0>; + solomon,segment-no-remap; + solomon,prechargep2 = <15>; + reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>; + vbat-supply = <&sw2_reg>; + status = "disabled"; + }; + + oled_1305: oled@3d { + compatible = "solomon,ssd1305fb-i2c"; + reg = <0x3d>; + solomon,height = <64>; + solomon,width = <128>; + solomon,page-offset = <0>; + solomon,col-offset = <4>; + solomon,prechargep2 = <15>; + reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>; + vbat-supply = <&sw2_reg>; + status = "disabled"; + }; + + gpio_oled: gpio@41 { + compatible = "nxp,pca9536"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x41>; + vcc-supply = <&sw2_reg>; + status = "disabled"; + }; + + touchkeys: keys@5a { + compatible = "fsl,mpr121-touchkey"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchkeys>; + reg = <0x5a>; + vdd-supply = <&sw2_reg>; + autorepeat; + linux,keycodes = <KEY_1>, <KEY_2>, <KEY_3>, <KEY_4>, <KEY_5>, + <KEY_6>, <KEY_7>, <KEY_8>, <KEY_9>, + <KEY_BACKSPACE>, <KEY_0>, <KEY_ENTER>; + poll-interval = <50>; + status = "disabled"; + }; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b020 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b020 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b020 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b020 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b020 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b020 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b020 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b020 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b020 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b020 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b020 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b020 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b020 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b020 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b010 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b010 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b098 + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b899 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b899 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b899 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899 + >; + }; + + pinctrl_ipu1: ipu1grp { + fsl,pins = < + MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b0 + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b098 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x8 + >; + }; + + pinctrl_touch: touchgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b098 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b098 + >; + }; + + pinctrl_touchkeys: touchkeysgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b098 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b098 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0a8 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0a8 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b098 + MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b098 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D30__USB_H1_OC 0x1b098 + >; + }; + + pinctrl_usbh1_vbus: usbh1-vbus { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x98 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1b098 + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b098 + >; + }; + + pinctrl_usbotg_vbus: usbotg-vbus { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x98 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x1f069 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10069 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17069 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17069 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17069 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17069 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17069 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17069 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17069 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17069 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b0 + >; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "disabled"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + vbus-supply = <®_usb_h1_vbus>; + over-current-active-low; + status = "disabled"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + vbus-supply = <®_usb_otg_vbus>; + over-current-active-low; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbphy1 { + fsl,tx-d-cal = <106>; + status = "okay"; +}; + +&usbphy2 { + fsl,tx-d-cal = <109>; + status = "disabled"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + vmmc-supply = <&sw2_reg>; + status = "okay"; +}; + +&wdog1 { + status = "disabled"; +}; + +&wdog2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-prtwd2.dts b/arch/arm/boot/dts/imx6q-prtwd2.dts index 349959d38020..54a57a4548e2 100644 --- a/arch/arm/boot/dts/imx6q-prtwd2.dts +++ b/arch/arm/boot/dts/imx6q-prtwd2.dts @@ -22,6 +22,13 @@ reg = <0x80000000 0x20000000>; }; + clk50m_phy: phy-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; + }; + usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; @@ -49,13 +56,17 @@ status = "okay"; }; +&clks { + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clk50m_phy>; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>; - clock-names = "ipg", "ahb"; status = "okay"; fixed-link { diff --git a/arch/arm/boot/dts/imx6q-yapp4-pegasus.dts b/arch/arm/boot/dts/imx6q-yapp4-pegasus.dts new file mode 100644 index 000000000000..ec6651ba4ba2 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-yapp4-pegasus.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2021 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6dl-yapp43-common.dtsi" + +/ { + model = "Y Soft IOTA Pegasus i.MX6Quad board"; + compatible = "ysoft,imx6q-yapp4-pegasus", "fsl,imx6q"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0xf0000000>; + }; +}; + +&gpio_oled { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&leds { + status = "okay"; +}; + +&oled_1305 { + status = "okay"; +}; + +&oled_1309 { + status = "okay"; +}; + +®_pu { + regulator-always-on; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&touchkeys { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi index 3def1b621c8e..2731faede1cb 100644 --- a/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi +++ b/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi @@ -105,6 +105,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; reg_3v3: regulator-3v3 { @@ -232,13 +233,16 @@ }; }; +&clks { + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clk50m_phy>; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clk50m_phy>; - clock-names = "ipg", "ahb", "ptp"; phy-mode = "rmii"; phy-supply = <®_3v3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 41e08fa23cce..b72ec745f6d1 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -1049,8 +1049,8 @@ clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET_REF>, - <&clks IMX6QDL_CLK_ENET_REF>; - clock-names = "ipg", "ahb", "ptp", "enet_out"; + <&clks IMX6QDL_CLK_ENET_REF_SEL>; + clock-names = "ipg", "ahb", "ptp", "enet_clk_ref"; fsl,stop-mode = <&gpr 0x34 27>; nvmem-cells = <&fec_mac_addr>; nvmem-cell-names = "mac-address"; diff --git a/arch/arm/boot/dts/imx6qp-yapp4-pegasus-plus.dts b/arch/arm/boot/dts/imx6qp-yapp4-pegasus-plus.dts new file mode 100644 index 000000000000..4a961a33bf2d --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-yapp4-pegasus-plus.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2021 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6qp.dtsi" +#include "imx6dl-yapp43-common.dtsi" + +/ { + model = "Y Soft IOTA Pegasus+ i.MX6QuadPlus board"; + compatible = "ysoft,imx6qp-yapp4-pegasus-plus", "fsl,imx6qp"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0xf0000000>; + }; +}; + +&gpio_oled { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&leds { + status = "okay"; +}; + +&oled_1305 { + status = "okay"; +}; + +&oled_1309 { + status = "okay"; +}; + +®_pu { + regulator-always-on; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&touchkeys { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6sl-tolino-vision.dts b/arch/arm/boot/dts/imx6sl-tolino-vision.dts new file mode 100644 index 000000000000..2694fe18a91b --- /dev/null +++ b/arch/arm/boot/dts/imx6sl-tolino-vision.dts @@ -0,0 +1,490 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device tree for the Tolino Vison ebook reader + * + * Name on mainboard is: 37NB-E60Q30+4A3 + * Serials start with: 6032 + * + * Copyright 2023 Andreas Kemnade + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "imx6sl.dtsi" + +/ { + model = "Tolino Vision"; + compatible = "kobo,tolino-vision", "fsl,imx6sl"; + + aliases { + mmc0 = &usdhc4; + mmc1 = &usdhc2; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&ec 0 50000>; + power-supply = <&backlight_regulator>; + }; + + backlight_regulator: regulator-backlight { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight_power>; + regulator-name = "backlight"; + gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + chosen { + stdout-path = &uart1; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + key-cover { + /* magnetic sensor in the corner next to the uSD slot */ + label = "Cover"; + gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + wakeup-source; + }; + + key-fl { + label = "Frontlight"; + gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BRIGHTNESS_CYCLE>; + }; + + key-power { + label = "Power"; + gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + /* LED on home button */ + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; + }; + + led-1 { + /* LED on power button */ + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_POWER; + gpios = <&gpio5 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_power>; + regulator-name = "SD3_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio4 29 GPIO_ACTIVE_LOW>; + }; + + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_reset>; + post-power-on-delay-ms = <20>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c1 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_sleep>; + status = "okay"; + + touchscreen@15 { + compatible = "elan,ektf2132"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + power-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>; + interrupts-extended = <&gpio5 6 IRQ_TYPE_EDGE_FALLING>; + }; + + accelerometer@1d { + compatible = "fsl,mma8652"; + reg = <0x1d>; + }; +}; + +&i2c2 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_sleep>; + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <100000>; + status = "okay"; + + ec: embedded-controller@43 { + compatible = "netronix,ntxec"; + reg = <0x43>; + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ec>; + interrupts-extended = <&gpio5 11 IRQ_TYPE_EDGE_FALLING>; + system-power-controller; + }; +}; + +&snvs_rtc { + /* + * We are using the RTC in the PMIC, but this one is not disabled + * in imx6sl.dtsi. + */ + status = "disabled"; +}; + +&uart1 { + /* J4 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart4 { + /* J9 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>; + cd-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + status = "okay"; + + /* removable uSD card */ +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + pinctrl-3 = <&pinctrl_usdhc3_sleep>; + vmmc-supply = <®_wifi>; + mmc-pwrseq = <&wifi_pwrseq>; + cap-power-off-card; + non-removable; + status = "okay"; + + /* CyberTan WC121 (BCM43362) SDIO WiFi */ +}; + +&usdhc4 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc4>; + pinctrl-1 = <&pinctrl_usdhc4_100mhz>; + pinctrl-2 = <&pinctrl_usdhc4_200mhz>; + pinctrl-3 = <&pinctrl_usdhc4_sleep>; + bus-width = <8>; + no-1-8-v; + non-removable; + status = "okay"; + + /* internal eMMC */ +}; + +&usbotg1 { + pinctrl-names = "default"; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&iomuxc { + pinctrl_backlight_power: backlight-powergrp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059 + >; + }; + + pinctrl_ec: ecgrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT0__GPIO5_IO11 0x17000 + >; + }; + + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x110B0 + MX6SL_PAD_SD1_DAT4__GPIO5_IO12 0x110B0 + MX6SL_PAD_KEY_COL1__GPIO3_IO26 0x11030 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c1_sleep: i2c1-sleepgrp { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c2_sleep: i2c2-sleepgrp { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1 + MX6SL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT6__GPIO5_IO07 0x17059 + MX6SL_PAD_SD1_DAT7__GPIO5_IO10 0x17059 + MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29 0x17059 + >; + }; + + pinctrl_ts: tsgrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x110B0 + MX6SL_PAD_SD1_DAT3__GPIO5_IO06 0x1B0B1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1 + MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x13059 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6SL_PAD_SD2_DAT4__GPIO5_IO02 0x1b0b1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x130b9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x130f9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc2_sleep: usdhc2-sleepgrp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__GPIO5_IO04 0x100f9 + MX6SL_PAD_SD2_CLK__GPIO5_IO05 0x100f9 + MX6SL_PAD_SD2_DAT0__GPIO5_IO01 0x100f9 + MX6SL_PAD_SD2_DAT1__GPIO4_IO30 0x100f9 + MX6SL_PAD_SD2_DAT2__GPIO5_IO03 0x100f9 + MX6SL_PAD_SD2_DAT3__GPIO4_IO28 0x100f9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x11059 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x11059 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x11059 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x11059 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x11059 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x11059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x170b9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x170f9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc3_sleep: usdhc3-sleepgrp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__GPIO5_IO21 0x100c1 + MX6SL_PAD_SD3_CLK__GPIO5_IO18 0x100c1 + MX6SL_PAD_SD3_DAT0__GPIO5_IO19 0x100c1 + MX6SL_PAD_SD3_DAT1__GPIO5_IO20 0x100c1 + MX6SL_PAD_SD3_DAT2__GPIO5_IO16 0x100c1 + MX6SL_PAD_SD3_DAT3__GPIO5_IO17 0x100c1 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6SL_PAD_FEC_TX_CLK__SD4_CMD 0x17059 + MX6SL_PAD_FEC_MDIO__SD4_CLK 0x13059 + MX6SL_PAD_FEC_RX_ER__SD4_DATA0 0x17059 + MX6SL_PAD_FEC_CRS_DV__SD4_DATA1 0x17059 + MX6SL_PAD_FEC_RXD1__SD4_DATA2 0x17059 + MX6SL_PAD_FEC_TXD0__SD4_DATA3 0x17059 + MX6SL_PAD_FEC_MDC__SD4_DATA4 0x17059 + MX6SL_PAD_FEC_RXD0__SD4_DATA5 0x17059 + MX6SL_PAD_FEC_TX_EN__SD4_DATA6 0x17059 + MX6SL_PAD_FEC_TXD1__SD4_DATA7 0x17059 + MX6SL_PAD_FEC_REF_CLK__SD4_RESET 0x17068 + >; + }; + + pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp { + fsl,pins = < + MX6SL_PAD_FEC_TX_CLK__SD4_CMD 0x170b9 + MX6SL_PAD_FEC_MDIO__SD4_CLK 0x130b9 + MX6SL_PAD_FEC_RX_ER__SD4_DATA0 0x170b9 + MX6SL_PAD_FEC_CRS_DV__SD4_DATA1 0x170b9 + MX6SL_PAD_FEC_RXD1__SD4_DATA2 0x170b9 + MX6SL_PAD_FEC_TXD0__SD4_DATA3 0x170b9 + MX6SL_PAD_FEC_MDC__SD4_DATA4 0x170b9 + MX6SL_PAD_FEC_RXD0__SD4_DATA5 0x170b9 + MX6SL_PAD_FEC_TX_EN__SD4_DATA6 0x170b9 + MX6SL_PAD_FEC_TXD1__SD4_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp { + fsl,pins = < + MX6SL_PAD_FEC_TX_CLK__SD4_CMD 0x170f9 + MX6SL_PAD_FEC_MDIO__SD4_CLK 0x130f9 + MX6SL_PAD_FEC_RX_ER__SD4_DATA0 0x170f9 + MX6SL_PAD_FEC_CRS_DV__SD4_DATA1 0x170f9 + MX6SL_PAD_FEC_RXD1__SD4_DATA2 0x170f9 + MX6SL_PAD_FEC_TXD0__SD4_DATA3 0x170f9 + MX6SL_PAD_FEC_MDC__SD4_DATA4 0x170f9 + MX6SL_PAD_FEC_RXD0__SD4_DATA5 0x170f9 + MX6SL_PAD_FEC_TX_EN__SD4_DATA6 0x170f9 + MX6SL_PAD_FEC_TXD1__SD4_DATA7 0x170f9 + >; + }; + + pinctrl_usdhc4_sleep: usdhc4-sleepgrp { + fsl,pins = < + MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21 0x100c1 + MX6SL_PAD_FEC_MDIO__GPIO4_IO20 0x100c1 + MX6SL_PAD_FEC_RX_ER__GPIO4_IO19 0x100c1 + MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x100c1 + MX6SL_PAD_FEC_RXD1__GPIO4_IO18 0x100c1 + MX6SL_PAD_FEC_TXD0__GPIO4_IO24 0x100c1 + MX6SL_PAD_FEC_MDC__GPIO4_IO23 0x100c1 + MX6SL_PAD_FEC_RXD0__GPIO4_IO17 0x100c1 + MX6SL_PAD_FEC_TX_EN__GPIO4_IO22 0x100c1 + MX6SL_PAD_FEC_TXD1__GPIO4_IO16 0x100c1 + >; + }; + + pinctrl_wifi_power: wifi-powergrp { + fsl,pins = < + MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */ + >; + }; + + pinctrl_wifi_reset: wifi-resetgrp { + fsl,pins = < + MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x10059 /* WIFI_RST */ + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-prti6g.dts b/arch/arm/boot/dts/imx6ul-prti6g.dts index c18390f238e1..b7c96fbe7a91 100644 --- a/arch/arm/boot/dts/imx6ul-prti6g.dts +++ b/arch/arm/boot/dts/imx6ul-prti6g.dts @@ -26,6 +26,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet1_ref_pad"; }; leds { @@ -60,6 +61,13 @@ status = "okay"; }; +&clks { + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&clock_ksz8081_out>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "enet1_ref_pad"; + assigned-clocks = <&clks IMX6UL_CLK_ENET1_REF_SEL>; + assigned-clock-parents = <&clock_ksz8081_out>; +}; + &ecspi1 { cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -85,12 +93,6 @@ pinctrl-0 = <&pinctrl_eth1>; phy-mode = "rmii"; phy-handle = <&rmii_phy>; - clocks = <&clks IMX6UL_CLK_ENET>, - <&clks IMX6UL_CLK_ENET_AHB>, - <&clks IMX6UL_CLK_ENET_PTP>, - <&clock_ksz8081_out>; - clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref"; status = "okay"; mdio { diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index f0a9139748b8..3d9d0f823568 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -531,10 +531,9 @@ clocks = <&clks IMX6UL_CLK_ENET>, <&clks IMX6UL_CLK_ENET_AHB>, <&clks IMX6UL_CLK_ENET_PTP>, - <&clks IMX6UL_CLK_ENET2_REF_125M>, - <&clks IMX6UL_CLK_ENET2_REF_125M>; + <&clks IMX6UL_CLK_ENET2_REF_SEL>; clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref", "enet_out"; + "enet_clk_ref"; fsl,num-tx-queues = <1>; fsl,num-rx-queues = <1>; fsl,stop-mode = <&gpr 0x10 4>; @@ -879,10 +878,9 @@ clocks = <&clks IMX6UL_CLK_ENET>, <&clks IMX6UL_CLK_ENET_AHB>, <&clks IMX6UL_CLK_ENET_PTP>, - <&clks IMX6UL_CLK_ENET_REF>, - <&clks IMX6UL_CLK_ENET_REF>; + <&clks IMX6UL_CLK_ENET1_REF_SEL>; clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref", "enet_out"; + "enet_clk_ref"; fsl,num-tx-queues = <1>; fsl,num-rx-queues = <1>; fsl,stop-mode = <&gpr 0x10 3>; diff --git a/arch/arm/boot/dts/imx6ull-tarragon-common.dtsi b/arch/arm/boot/dts/imx6ull-tarragon-common.dtsi new file mode 100644 index 000000000000..3fdece5bd31f --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tarragon-common.dtsi @@ -0,0 +1,852 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright (C) 2023 chargebyte GmbH + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pwm/pwm.h> +#include "imx6ull.dtsi" + +/ { + aliases { + mmc0 = &usdhc2; /* eMMC */ + }; + + chosen { + stdout-path = &uart4; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + pinctrl-0 = <&pinctrl_emmc_rst>; + pinctrl-names = "default"; + reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; + }; + + reg_dcdc_3v3: regulator-dcdc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "dcdc-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "ldo-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_status_leds>; + + led-1 { + function = LED_FUNCTION_BOOT; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + }; + + led-2 { + function = LED_FUNCTION_PROGRAMMING; + color = <LED_COLOR_ID_YELLOW>; + gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + }; + + led-3 { + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc_motor + &pinctrl_adc_cp + &pinctrl_adc_pp>; + vref-supply = <&vgen1_reg>; + status = "okay"; +}; + +&cpu0 { + clock-frequency = <792000000>; +}; + +&ecspi2 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + num-cs = <3>; + cs-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH + &gpio3 2 GPIO_ACTIVE_HIGH + &gpio3 4 GPIO_ACTIVE_HIGH>; +}; + +&ecspi4 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + num-cs = <1>; + cs-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1 + &pinctrl_enet1_phy_rst + &pinctrl_enet_mdio>; + phy-supply = <®_dcdc_3v3>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + phy-handle = <ðphy0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1_phy_int>; + interrupt-parent = <&gpio2>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpio2 7 IRQ_TYPE_EDGE_FALLING>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + max-speed = <100>; + smsc,disable-energy-detect; + }; + }; +}; + +&gpio1 { + gpio-line-names = "", /* 0 */ + "", + "", + "", + "", + "", /* 5 */ + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "CP_INVERT", + "", + "", /* 15 */ + "", + "", + "", + "MOTOR_1_FAULT_N", + "", /* 20 */ + "", + "ROTARY_SWITCH_1_2_N", + "ROTARY_SWITCH_1_4_N", + "ROTARY_SWITCH_1_8_N", + "MOTOR_2_FAULT_N"; /* 25 */ +}; + +&gpio3 { + gpio-line-names = "", /* 0 */ + "", + "", + "", + "", + "", /* 5 */ + "EXT_GPIO", + "MOTOR_1_DRIVER_IN1_N", + "MOTOR_1_DRIVER_IN2", + "MOTOR_2_DRIVER_IN1", + "STM32_BOOT0", /* 10 */ + "STM32_RST_N", + "RELAY_1_ENABLE", + "RELAY_2_ENABLE", + "", + "", /* 15 */ + "QCA700X_MAINS_BOOTLOADER_N", + "QCA700X_CP_RST_N", + "QCA700X_CP_BOOTLOADER_N", + "", + "DIGITAL_OUT_1", /* 20 */ + "DIGITAL_OUT_2", + "DIGITAL_OUT_3", + "DIGITAL_OUT_4", + "DIGITAL_OUT_5", + "DIGITAL_OUT_6", /* 25 */ + "ROTARY_SWITCH_2_8_N", + "ROTARY_SWITCH_2_4_N", + "ROTARY_SWITCH_2_2_N"; +}; + +&gpio4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + + gpio-line-names = "", /* 0 */ + "", + "", + "", + "", + "", /* 5 */ + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "BOARD_VARIANT_1", + "BOARD_VARIANT_2", + "BOARD_VARIANT_0", /* 15 */ + "BOARD_VARIANT_3", + "", + "ROTARY_SWITCH_2_1_N", + "", + "DIGITAL_IN_5", /* 20 */ + "", + "", + "DIGITAL_IN_6", + "", + "DIGITAL_IN_1", /* 25 */ + "DIGITAL_IN_2", + "DIGITAL_IN_4", + "DIGITAL_IN_3"; + + pmic-int-hog { + gpio-hog; + gpios = <19 0>; + input; + }; +}; + +&gpio5 { + gpio-line-names = "ROTARY_SWITCH_1_1_N", /* 0 */ + "", + "RELAY_2_SENSE", + "RELAY_1_SENSE", + "", + "", /* 5 */ + "", + "QCA700X_MAINS_RST_N", + "MOTOR_2_DRIVER_IN2", + "", + "CP_POSITIVE_PEAK_RST", /* 10 */ + "CP_NEGATIVE_PEAK_RST"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + scl-gpios = <&gpio1 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pfuze3001: pmic@8 { + compatible = "fsl,pfuze3001"; + reg = <0x08>; + + regulators { + sw1_reg: sw1 { + regulator-name = "SW1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-name = "SW2"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-name = "SW3"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + snvs_reg: vsnvs { + regulator-name = "VSNVS"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vldo1 { + regulator-name = "VLDO1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen2_reg: vldo2 { + regulator-name = "VLDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen3_reg: vccsd { + regulator-name = "VCCSD"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: v33 { + regulator-name = "V33"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vldo3 { + regulator-name = "VLDO3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vldo4 { + regulator-name = "VLDO4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + onewire@18 { + compatible = "maxim,ds2484"; + reg = <0x18>; + }; + + accelerometer@19 { + compatible = "st,iis328dq", "st,h3lis331dl-accel"; + reg = <0x19>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accelerometer_int1_snvs>; + vdd-supply = <®_dcdc_3v3>; + vddio-supply = <®_dcdc_3v3>; + st,drdy-int-pin = <1>; + interrupt-parent = <&gpio5>; + interrupts = <5 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_board_var + &pinctrl_digital_input + &pinctrl_digital_output + &pinctrl_gpio_motor + &pinctrl_hog_pins + &pinctrl_rotary_switch1 + &pinctrl_rotary_switch2>; + + pinctrl_adc_cp: adc-cpgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + >; + }; + + pinctrl_adc_motor: adc-motorgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0xb0 + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; + + pinctrl_adc_pp: adc-ppgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0xb0 + >; + }; + + pinctrl_board_var: board-vargrp { + fsl,pins = < + MX6UL_PAD_NAND_CLE__GPIO4_IO15 0xb0 + MX6UL_PAD_NAND_CE0_B__GPIO4_IO13 0xb0 + MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0xb0 + MX6UL_PAD_NAND_DQS__GPIO4_IO16 0xb0 + >; + }; + + pinctrl_digital_input: digital-inputgrp { + fsl,pins = < + MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0xb0 + MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0xb0 + MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0xb0 + MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0xb0 + MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0xb0 + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0xb0 + >; + }; + + pinctrl_digital_output: digital-outputgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA15__GPIO3_IO20 0x400000b0 + MX6UL_PAD_LCD_DATA16__GPIO3_IO21 0x400000b0 + MX6UL_PAD_LCD_DATA17__GPIO3_IO22 0x400000b0 + MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x400000b0 + MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x400000b0 + MX6UL_PAD_LCD_DATA20__GPIO3_IO25 0x400000b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x10b0 + MX6UL_PAD_LCD_HSYNC__GPIO3_IO02 0xb0 + MX6UL_PAD_LCD_RESET__GPIO3_IO04 0xb0 + MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x10b0 + MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x10b0 + MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x10b0 + >; + }; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x10b0 + MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK 0x10b0 + MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO 0x10b0 + MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI 0x10b0 + >; + }; + + pinctrl_emmc_rst: emmc-rstgrp { + fsl,pins = < + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x400010b0 + >; + }; + + pinctrl_enet_mdio: enet-mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x10b0 + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x10b0 + >; + }; + + pinctrl_enet1_phy_int: enet1-phy-intgrp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07 0x10b0 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x100b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x100b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x100b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x400000b1 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0xb0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0xb0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0xb0 + >; + }; + + pinctrl_ext_uart: ext-uartgrp { + fsl,pins = < + MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX 0xb0 + MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX 0xb0 + >; + }; + + pinctrl_fan_enable: fan-enablegrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0x400000b0 + >; + }; + + pinctrl_gpio_motor: gpio-motorgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0x400000b0 + MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0x400000b0 + MX6UL_PAD_LCD_DATA04__GPIO3_IO09 0x400000b0 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0xb0 + MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0xb0 + >; + }; + + pinctrl_hog_pins: hog-pinsgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA07__GPIO3_IO12 0x400000b0 + MX6UL_PAD_LCD_DATA08__GPIO3_IO13 0x400000b0 + MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x400070a0 + MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x400000b0 + MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x400000b0 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x400008b0 + MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x400008b0 + >; + }; + + pinctrl_i2c4_gpio: i2c4-gpiogrp { + fsl,pins = < + MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x400008b0 + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x400008b0 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT 0x70b1 + MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0xb0 + >; + }; + + pinctrl_pwm_cp: pinctrl-pwm-cpgrp { + fsl,pins = < + MX6UL_PAD_JTAG_TRST_B__PWM8_OUT 0x60a0 + >; + }; + + pinctrl_pwm_digital_input_ref: pwm-digital-input-refgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0xb0 + >; + }; + + pinctrl_pwm_fan: pwm-fangrp { + fsl,pins = < + MX6UL_PAD_JTAG_TCK__PWM7_OUT 0x60a0 + >; + }; + + pinctrl_qca700x_cp_btld: qca700x-cp-btldgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA13__GPIO3_IO18 0x400000b0 + >; + }; + + pinctrl_qca700x_cp_int: qca700x-cp-intgrp { + fsl,pins = < + MX6UL_PAD_SD1_DATA1__GPIO2_IO19 0x10b0 + >; + }; + + pinctrl_qca700x_cp_rst: qca700x-cp-rstgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x400000b0 + >; + }; + + pinctrl_qca700x_mains_btld: qca700x-mains-btldgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA11__GPIO3_IO16 0x400000b0 + >; + }; + + pinctrl_rotary_switch1: rotary-switch1grp { + fsl,pins = < + MX6UL_PAD_UART2_CTS_B__GPIO1_IO22 0xb0 + MX6UL_PAD_UART2_RTS_B__GPIO1_IO23 0xb0 + MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0xb0 + >; + }; + + pinctrl_rotary_switch2: rotary-switch2grp { + fsl,pins = < + MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18 0xb0 + MX6UL_PAD_LCD_DATA23__GPIO3_IO28 0xb0 + MX6UL_PAD_LCD_DATA22__GPIO3_IO27 0xb0 + MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0xb0 + >; + }; + + pinctrl_rs485_1: rs485-1grp { + fsl,pins = < + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0xb0 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0xb0 + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0xb0 + >; + }; + + pinctrl_rs485_2: rs485-2grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x10b0 + MX6UL_PAD_CSI_DATA01__UART5_DCE_RX 0x10b0 + MX6UL_PAD_CSI_DATA00__UART5_DCE_TX 0x10b0 + >; + }; + + pinctrl_status_leds: status-ledsgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA09__GPIO3_IO14 0xb0 + MX6UL_PAD_LCD_DATA10__GPIO3_IO15 0xb0 + MX6UL_PAD_LCD_DATA14__GPIO3_IO19 0xb0 + >; + }; + + pinctrl_stm32: stm32grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX 0x10b0 + MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX 0x10b0 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__UART4_DTE_RX 0xb0 + MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX 0xb0 + >; + }; + + pinctrl_usb: usbgrp { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USB_OTG1_OC 0x70b0 + MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID 0x70b0 + >; + }; + + pinctrl_usb_pwr: usb-pwrgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USB_OTG1_PWR 0xb0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x7071 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x7071 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x7071 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x7071 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x7071 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x7071 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x7071 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x7071 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x7071 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x7071 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x70b1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x70b1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x70b1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x70b1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x70b1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x70b1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x70b1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x70b1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x70b1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x70b1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x70f1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x70f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x70f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x70f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x70f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x70f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x70f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x70f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x70f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x70f1 + >; + }; + + pinctrl_wdog2: wdoggrp { + fsl,pins = < + MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B 0x10b0 + >; + }; +}; + +&iomuxc_snvs { + pinctrl-names = "default_snvs"; + pinctrl-0 = <&pinctrl_cp_peak_snvs + &pinctrl_gpio_motor_snvs + &pinctrl_relay_sense_snvs + &pinctrl_rotary_switch1_snvs>; + + pinctrl_accelerometer_int1_snvs: accelerometer-int1-snvsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x130a0 + >; + }; + + pinctrl_cp_peak_snvs: cp-peak-snvsgrp { + fsl,pins = < + MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x130a0 + MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x130a0 + >; + }; + + pinctrl_enet1_phy_rst: enet1-phy-rstgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x100a0 + >; + }; + + pinctrl_fan_sense_snvs: fan-sense-snvsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x100a0 + >; + }; + + pinctrl_gpio_motor_snvs: gpio-motor-snvsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x110a0 + >; + }; + + pinctrl_qca700x_mains_int: qca700x-mains-intgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x130a0 + >; + }; + + pinctrl_qca700x_mains_rst: qca700x-mains-rstgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x400100a0 + >; + }; + + pinctrl_relay_sense_snvs: relay-sense-snvsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x100a0 + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x100a0 + >; + }; + + pinctrl_rotary_switch1_snvs: rotary-switch1-snvsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x110a0 + >; + }; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_digital_input_ref>; + status = "okay"; +}; + +&pwm8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_cp>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rs485_1>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + fsl,dte-mode; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rs485_2>; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_stm32>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ext_uart>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb + &pinctrl_usb_pwr>; + dr_mode = "host"; + power-active-high; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbphy1 { + fsl,tx-cal-45-dn-ohms = <35>; + fsl,tx-cal-45-dp-ohms = <35>; +}; + +&usbphy2 { + fsl,tx-cal-45-dn-ohms = <35>; + fsl,tx-cal-45-dp-ohms = <35>; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + vmmc-supply = <&sw2_reg>; + vqmmc-supply = <®_1v8>; + mmc-pwrseq = <&emmc_pwrseq>; + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&wdog1 { + status = "disabled"; +}; + +&wdog2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog2>; + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-tarragon-master.dts b/arch/arm/boot/dts/imx6ull-tarragon-master.dts new file mode 100644 index 000000000000..67007ce383e3 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tarragon-master.dts @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright (C) 2023 chargebyte GmbH + +#include "imx6ull-tarragon-common.dtsi" + +/ { + model = "chargebyte Tarragon Master"; + compatible = "chargebyte,imx6ull-tarragon-master", "fsl,imx6ull"; + + fan0: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm7 0 40000 PWM_POLARITY_INVERTED>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan_sense_snvs>; + fan-supply = <®_fan>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + }; + + reg_fan: regulator { + compatible = "regulator-fixed"; + regulator-name = "fan-supply"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan_enable>; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; +}; + +&ecspi2 { + status = "okay"; + + qca700x_cp: ethernet@0 { + reg = <0x0>; + compatible = "qca,qca7000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qca700x_cp_int + &pinctrl_qca700x_cp_rst + &pinctrl_qca700x_cp_btld>; + interrupt-parent = <&gpio2>; + interrupts = <19 IRQ_TYPE_EDGE_RISING>; + spi-cpha; + spi-cpol; + spi-max-frequency = <16000000>; + }; +}; + +&ecspi4 { + status = "okay"; + + qca700x_mains: ethernet@0 { + reg = <0x0>; + compatible = "qca,qca7000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qca700x_mains_int + &pinctrl_qca700x_mains_rst + &pinctrl_qca700x_mains_btld>; + interrupt-parent = <&gpio5>; + interrupts = <9 IRQ_TYPE_EDGE_RISING>; + spi-cpha; + spi-cpol; + spi-max-frequency = <16000000>; + }; +}; + +&fec1 { + status = "okay"; +}; + +&pwm7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_fan>; + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-tarragon-micro.dts b/arch/arm/boot/dts/imx6ull-tarragon-micro.dts new file mode 100644 index 000000000000..e471c2005bee --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tarragon-micro.dts @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright (C) 2023 chargebyte GmbH + +#include "imx6ull-tarragon-common.dtsi" + +/ { + model = "chargebyte Tarragon Micro"; + compatible = "chargebyte,imx6ull-tarragon-micro", "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-tarragon-slave.dts b/arch/arm/boot/dts/imx6ull-tarragon-slave.dts new file mode 100644 index 000000000000..cee223b5f8e1 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tarragon-slave.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright (C) 2023 chargebyte GmbH + +#include "imx6ull-tarragon-common.dtsi" + +/ { + model = "chargebyte Tarragon Slave"; + compatible = "chargebyte,imx6ull-tarragon-slave", "fsl,imx6ull"; +}; + +&ecspi2 { + status = "okay"; + + qca700x_cp: ethernet@0 { + reg = <0x0>; + compatible = "qca,qca7000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qca700x_cp_int + &pinctrl_qca700x_cp_rst + &pinctrl_qca700x_cp_btld>; + interrupt-parent = <&gpio2>; + interrupts = <19 IRQ_TYPE_EDGE_RISING>; + spi-cpha; + spi-cpol; + spi-max-frequency = <16000000>; + }; +}; + +&fec1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-tarragon-slavext.dts b/arch/arm/boot/dts/imx6ull-tarragon-slavext.dts new file mode 100644 index 000000000000..7fd53b7a4372 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tarragon-slavext.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright (C) 2023 chargebyte GmbH + +#include "imx6ull-tarragon-common.dtsi" + +/ { + model = "chargebyte Tarragon SlaveXT"; + compatible = "chargebyte,imx6ull-tarragon-slavext", "fsl,imx6ull"; + + fan0: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm7 0 40000 PWM_POLARITY_INVERTED>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan_sense_snvs>; + fan-supply = <®_fan>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + }; + + reg_fan: regulator { + compatible = "regulator-fixed"; + regulator-name = "fan-supply"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan_enable>; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; +}; + +&ecspi2 { + status = "okay"; + + qca700x_cp: ethernet@0 { + reg = <0x0>; + compatible = "qca,qca7000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qca700x_cp_int + &pinctrl_qca700x_cp_rst + &pinctrl_qca700x_cp_btld>; + interrupt-parent = <&gpio2>; + interrupts = <19 IRQ_TYPE_EDGE_RISING>; + spi-cpha; + spi-cpol; + spi-max-frequency = <16000000>; + }; +}; + +&fec1 { + status = "okay"; +}; + +&pwm7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_fan>; + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts index 427f8d04ec89..92cb45dacda6 100644 --- a/arch/arm/boot/dts/imx7d-remarkable2.dts +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "imx7d.dtsi" +#include <dt-bindings/input/linux-event-codes.h> / { model = "reMarkable 2.0"; @@ -69,6 +70,17 @@ startup-delay-us = <100000>; /* 100 ms */ }; + reg_touch: regulator-touch { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_TOUCH"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_reg>; + gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; @@ -79,6 +91,10 @@ }; }; +&cpu0 { + cpu-supply = <&buck1>; +}; + &clks { assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>, <&clks IMX7D_CLKO2_ROOT_DIV>; @@ -106,6 +122,193 @@ }; }; +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + bd71815: pmic@4b { + compatible = "rohm,bd71815"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bd71815>; + interrupt-parent = <&gpio6>; /* PMIC_INT_B GPIO6_IO16 */ + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + clocks = <&clks IMX7D_CLKO2_ROOT_SRC>; + clock-output-names = "bd71815-32k-out"; + #clock-cells = <0>; + #gpio-cells = <2>; + + regulators { + buck1: buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2000000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + buck2: buck2 { + regulator-name = "buck2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2000000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + buck3: buck3 { + regulator-name = "buck3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2700000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4: buck4 { + regulator-name = "buck4"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: buck5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: ldo1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: ldo3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: ldo4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: ldo5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo6: ldodvref { + regulator-name = "ldodvref"; + regulator-boot-on; + regulator-always-on; + }; + + ldo7: ldolpsr { + regulator-name = "ldolpsr"; + regulator-boot-on; + regulator-always-on; + }; + + boost: wled { + regulator-name = "wled"; + regulator-min-microamp = <10>; + regulator-max-microamp = <25000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + touchscreen@24 { + compatible = "cypress,tt21000"; + reg = <0x24>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch>; + interrupt-parent = <&gpio1>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + vdd-supply = <®_touch>; + touchscreen-size-x = <880>; + touchscreen-size-y = <1280>; + #address-cells = <1>; + #size-cells = <0>; + + button@0 { + reg = <0>; + linux,keycodes = <KEY_HOMEPAGE>; + }; + + button@1 { + reg = <1>; + linux,keycodes = <KEY_MENU>; + }; + + button@2 { + reg = <2>; + linux,keycodes = <KEY_BACK>; + }; + + button@3 { + reg = <3>; + linux,keycodes = <KEY_SEARCH>; + }; + + button@4 { + reg = <4>; + linux,keycodes = <KEY_VOLUMEDOWN>; + }; + + button@5 { + reg = <5>; + linux,keycodes = <KEY_VOLUMEUP>; + }; + + button@6 { + reg = <6>; + linux,keycodes = <KEY_CAMERA>; + }; + + button@7 { + reg = <7>; + linux,keycodes = <KEY_POWER>; + }; + }; +}; + &i2c4 { clock-frequency = <100000>; pinctrl-names = "default", "sleep"; @@ -216,6 +419,12 @@ }; &iomuxc { + pinctrl_bd71815: bd71815grp { + fsl,pins = < + MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x59 + >; + }; + pinctrl_brcm_reg: brcmreggrp { fsl,pins = < /* WIFI_PWR_EN */ @@ -230,6 +439,15 @@ >; }; + pinctrl_touch: touchgrp { + fsl,pins = < + /* CYTTSP interrupt */ + MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x54 + /* CYTTSP reset */ + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x04 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f @@ -237,6 +455,20 @@ >; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f + MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f + >; + }; + pinctrl_i2c4: i2c4grp { fsl,pins = < MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f @@ -244,6 +476,13 @@ >; }; + pinctrl_touch_reg: touchreggrp { + fsl,pins = < + /* TOUCH_PWR_EN */ + MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x14 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 7ceb7c09f7ad..4b94b8afb55d 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -165,6 +165,15 @@ reg = <0x306d0000 0x10000>; status = "disabled"; }; + + pxp: pxp@30700000 { + compatible = "fsl,imx7d-pxp"; + reg = <0x30700000 0x10000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PXP_CLK>; + clock-names = "axi"; + }; }; &aips3 { diff --git a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts b/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts index bd4230d7dac9..765ab36e6f0c 100644 --- a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts +++ b/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts @@ -56,7 +56,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from Coyote PCI boardfile. @@ -80,7 +80,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -102,7 +102,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts b/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts index 92b987bc3f99..6f5b4e4eb1cc 100644 --- a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts +++ b/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts @@ -112,7 +112,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from Vulcan PCI boardfile. @@ -137,7 +137,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -159,7 +159,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts b/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts index 5ab09fb10dae..b9d46eb06507 100644 --- a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts +++ b/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts @@ -122,7 +122,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from DSM-G600 PCI boardfile (dsmg600-pci.c) diff --git a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts b/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts index b740403b05a9..5a5e16cc7335 100644 --- a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts +++ b/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts @@ -159,7 +159,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Written based on the FSG-3 PCI boardfile. @@ -187,7 +187,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -209,7 +209,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts b/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts index b7cbc90e1c18..4d70f6afd13a 100644 --- a/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts +++ b/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts @@ -53,7 +53,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from Gateway 7001 PCI boardfile (gateway7001-pci.c) @@ -74,7 +74,7 @@ }; ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -91,7 +91,7 @@ }; ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts b/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts index a5943f51e8c2..97e3f25bb210 100644 --- a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts +++ b/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts @@ -108,7 +108,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from Avila PCI boardfile. @@ -142,7 +142,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -164,7 +164,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts b/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts index f80388b17a9e..9ec0169bacf8 100644 --- a/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts +++ b/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts @@ -82,7 +82,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * The device has 4 slots (IDSEL) with one dedicated IRQ per slot. @@ -148,7 +148,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 32>; phy-mode = "rgmii"; @@ -170,7 +170,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 33>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts b/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts index cbc87b344f6a..8da6823e1dbe 100644 --- a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts +++ b/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts @@ -109,7 +109,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from NAS 100D PCI boardfile (nas100d-pci.c) @@ -129,7 +129,7 @@ }; ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts b/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts index beaadda4685f..194945748dc3 100644 --- a/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts +++ b/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts @@ -40,7 +40,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -62,7 +62,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts b/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts index f17cab12a64b..7011fea6205b 100644 --- a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts +++ b/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts @@ -61,7 +61,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from IXDPG425 PCI boardfile. @@ -95,7 +95,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -117,7 +117,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts index 0edc5928e00b..da1e93212b86 100644 --- a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts +++ b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts @@ -116,7 +116,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from NSLU2 PCI boardfile, INT A, B, C swizzled D constant @@ -143,7 +143,7 @@ }; ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts index 5e7e31b74b04..4aba9e0214a0 100644 --- a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts +++ b/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts @@ -117,7 +117,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * We have up to 2 slots (IDSEL) with 2 swizzled IRQs. @@ -141,7 +141,7 @@ * Do we need a new binding and property for this? */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -165,7 +165,7 @@ /* EthC - connected to KS8995 switch port 5 */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts index df2ca6d95ee5..19d56e9aec9d 100644 --- a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts +++ b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts @@ -54,7 +54,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from WG302 v2 PCI boardfile (wg302v2-pci.c) @@ -77,7 +77,7 @@ }; ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts b/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts index b444003c10e1..c550c421b659 100644 --- a/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts +++ b/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts @@ -79,7 +79,7 @@ /* LAN port */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts index cf4010d60187..1db849515f9e 100644 --- a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts +++ b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts @@ -121,7 +121,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * In the boardfile for the Cambria from OpenWRT the interrupts @@ -167,7 +167,7 @@ }; ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; @@ -188,7 +188,7 @@ }; ethernet@c800c000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 2>; queue-txready = <&qmgr 19>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts b/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts index 3d7cfa1a5ed4..4703a8b24765 100644 --- a/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts +++ b/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts @@ -36,7 +36,7 @@ /* CHECKME: ethernet set-up taken from Gateworks Cambria */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; @@ -57,7 +57,7 @@ }; ethernet@c800c000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 2>; queue-txready = <&qmgr 19>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi b/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi index 146352ba848b..31c0a69771c4 100644 --- a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi +++ b/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi @@ -99,7 +99,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from IXDP425 PCI boardfile. diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts index 5d6d074011df..abd5aef8b87d 100644 --- a/arch/arm/boot/dts/keystone-k2e-evm.dts +++ b/arch/arm/boot/dts/keystone-k2e-evm.dts @@ -159,7 +159,7 @@ }; &mdio { - status = "ok"; + status = "okay"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index 88be868cf71e..3a87b7943c70 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -534,7 +534,7 @@ &dss { pinctrl-names = "default"; pinctrl-0 = <&vout_pins>; - status = "ok"; + status = "okay"; port { dpi_out: endpoint { diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts index 4352397b4f52..1f762af6f502 100644 --- a/arch/arm/boot/dts/keystone-k2hk-evm.dts +++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts @@ -183,7 +183,7 @@ }; &mdio { - status = "ok"; + status = "okay"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts index 1c880cf8fa91..3a69f65de81e 100644 --- a/arch/arm/boot/dts/keystone-k2l-evm.dts +++ b/arch/arm/boot/dts/keystone-k2l-evm.dts @@ -132,7 +132,7 @@ }; &mdio { - status = "ok"; + status = "okay"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts index f9f4b0143ba8..0c0851cd9bec 100644 --- a/arch/arm/boot/dts/kirkwood-dir665.dts +++ b/arch/arm/boot/dts/kirkwood-dir665.dts @@ -232,7 +232,7 @@ port@6 { reg = <6>; - label = "cpu"; + phy-mode = "rgmii-id"; ethernet = <ð0port>; fixed-link { speed = <1000>; @@ -251,6 +251,7 @@ ethernet0-port@0 { speed = <1000>; duplex = <1>; + phy-mode = "rgmii"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-l-50.dts b/arch/arm/boot/dts/kirkwood-l-50.dts index 60c1e94f5dd3..9fd3581bb24b 100644 --- a/arch/arm/boot/dts/kirkwood-l-50.dts +++ b/arch/arm/boot/dts/kirkwood-l-50.dts @@ -254,7 +254,6 @@ port@6 { reg = <6>; - label = "cpu"; phy-mode = "rgmii-id"; ethernet = <ð1port>; fixed-link { @@ -330,6 +329,7 @@ ethernet1-port@0 { speed = <1000>; duplex = <1>; + phy-mode = "rgmii"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts index 2f9660f3b457..27fd6e2337d5 100644 --- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts +++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts @@ -198,7 +198,7 @@ port@5 { reg = <5>; - label = "cpu"; + phy-mode = "rgmii-id"; ethernet = <ð0port>; fixed-link { speed = <1000>; @@ -221,6 +221,7 @@ ethernet0-port@0 { speed = <1000>; duplex = <1>; + phy-mode = "rgmii"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index ced576acfb95..5a77286136c7 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -149,7 +149,7 @@ port@5 { reg = <5>; - label = "cpu"; + phy-mode = "rgmii-id"; ethernet = <ð0port>; fixed-link { speed = <1000>; @@ -166,6 +166,7 @@ ethernet0-port@0 { speed = <1000>; duplex = <1>; + phy-mode = "rgmii"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi index e21aa674945d..9d62f910cddf 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi @@ -105,7 +105,7 @@ port@5 { reg = <5>; - label = "cpu"; + phy-mode = "rgmii-id"; ethernet = <ð0port>; fixed-link { speed = <1000>; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 21eb59041a7d..4f22ab451aae 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -506,6 +506,15 @@ }; }; + sdxc_a_pins: sdxc-a { + mux { + groups = "sdxc_d0_a", "sdxc_d13_a", + "sdxc_clk_a", "sdxc_cmd_a"; + function = "sdxc_a"; + bias-pull-up; + }; + }; + sdxc_b_pins: sdxc-b { mux { groups = "sdxc_d0_b", "sdxc_d13_b", @@ -568,6 +577,14 @@ bias-disable; }; }; + + xtal_32k_out_pins: xtal-32k-out { + mux { + groups = "xtal_32k_out"; + function = "xtal"; + bias-disable; + }; + }; }; }; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index d5a3fe21e8e7..5979209fe91e 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -580,8 +580,8 @@ }; &gpio_intc { - compatible = "amlogic,meson-gpio-intc", - "amlogic,meson8b-gpio-intc"; + compatible = "amlogic,meson8b-gpio-intc", + "amlogic,meson-gpio-intc"; status = "okay"; }; diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts index fa6d55f1cfb9..aa4d4bf70629 100644 --- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts +++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts @@ -19,7 +19,6 @@ ethernet0 = ðmac; i2c0 = &i2c_AO; serial0 = &uart_AO; - serial1 = &uart_A; mmc0 = &sd_card_slot; }; @@ -45,12 +44,32 @@ }; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + + pinctrl-0 = <&xtal_32k_out_pins>; + pinctrl-names = "default"; + + reset-gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>, + <&gpio_ao GPIOAO_6 GPIO_ACTIVE_LOW>; + + clocks = <&xtal_32k_out>; + clock-names = "ext_clock"; + }; + vcc_3v3: regulator-vcc3v3 { compatible = "regulator-fixed"; regulator-name = "VCC3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + xtal_32k_out: xtal-32k-out-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xtal_32k_out"; + }; }; &cpu0 { @@ -192,6 +211,27 @@ vref-supply = <&vddio_ao1v8>; }; +/* SDIO wifi */ +&sdhc { + status = "okay"; + + pinctrl-0 = <&sdxc_a_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + max-frequency = <50000000>; + + disable-wp; + non-removable; + cap-mmc-highspeed; + cap-sd-highspeed; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_3v3>; +}; + &sdio { status = "okay"; @@ -222,6 +262,12 @@ pinctrl-0 = <&uart_a1_pins>, <&uart_a1_cts_rts_pins>; pinctrl-names = "default"; uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm20702a1"; + shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + }; }; &uart_AO { diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 0a0fe8c5a405..ce6a4015fed5 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -359,7 +359,7 @@ mediatek,apmixedsys = <&apmixedsys>; }; - nandc: nfi@1100d000 { + nandc: nand-controller@1100d000 { compatible = "mediatek,mt2701-nfc"; reg = <0 0x1100d000 0 0x1000>; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts index 5008115d2494..ece61a6a7a89 100644 --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts @@ -322,6 +322,12 @@ vqmmc-supply = <®_3p3v>; }; +&mt6323keys { + home { + status = "disabled"; + }; +}; + &mt6323_leds { status = "okay"; diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi index 1e96c865d41d..8adc0ef01f6c 100644 --- a/arch/arm/boot/dts/omap-zoom-common.dtsi +++ b/arch/arm/boot/dts/omap-zoom-common.dtsi @@ -14,7 +14,7 @@ * they probably share the same GPIO IRQ * REVISIT: Add timing support from slls644g.pdf */ - uart@3,0 { + serial@3,0 { compatible = "ns16550a"; reg = <3 0 8>; /* CS3, offset 0, IO size 8 */ bank-width = <2>; @@ -50,7 +50,7 @@ gpmc,wr-data-mux-bus-ns = <45>; gpmc,wr-access-ns = <145>; }; - uart@3,1 { + serial@3,1 { compatible = "ns16550a"; reg = <3 0x100 8>; /* CS3, offset 0x100, IO size 8 */ bank-width = <2>; @@ -61,7 +61,7 @@ clock-frequency = <1843200>; current-speed = <115200>; }; - uart@3,2 { + serial@3,2 { compatible = "ns16550a"; reg = <3 0x200 8>; /* CS3, offset 0x200, IO size 8 */ bank-width = <2>; @@ -72,7 +72,7 @@ clock-frequency = <1843200>; current-speed = <115200>; }; - uart@3,3 { + serial@3,3 { compatible = "ns16550a"; reg = <3 0x300 8>; /* CS3, offset 0x300, IO size 8 */ bank-width = <2>; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 35eced6521ef..1a085bc01317 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 BeagleBoard xM"; - compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts index 48e48b0c8190..e1b1a047f77a 100644 --- a/arch/arm/boot/dts/omap3-cm-t3730.dts +++ b/arch/arm/boot/dts/omap3-cm-t3730.dts @@ -9,7 +9,7 @@ / { model = "CompuLab CM-T3730"; - compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap3"; wl12xx_vmmc2: wl12xx_vmmc2 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 87e0ab1bbe95..4183fde46059 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -11,8 +11,7 @@ / { model = "OMAP3 GTA04"; - compatible = "ti,omap3-gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3"; - + compatible = "goldelico,gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { cpu0-supply = <&vcc>; @@ -612,6 +611,22 @@ clock-frequency = <100000>; }; +&mcspi1 { + status = "disabled"; +}; + +&mcspi2 { + status = "disabled"; +}; + +&mcspi3 { + status = "disabled"; +}; + +&mcspi4 { + status = "disabled"; +}; + &usb_otg_hs { interface-type = <0>; usb-phy = <&usb2_phy>; diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts index 9dca5bfc87ab..eadb5b857f48 100644 --- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts +++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts @@ -10,7 +10,7 @@ / { model = "IGEPv2 Rev. F (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap3"; /* Regulator to trigger the WL_EN signal of the Wifi module */ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen { diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index c6f863bc03ad..3f0197ceae09 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -10,7 +10,7 @@ / { model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap3"; vmmcsdio_fixed: fixedregulator-mmcsdio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts index 8e9c12cf51a7..bc95a8df2e6a 100644 --- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -10,7 +10,7 @@ / { model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap3"; /* Regulator to trigger the WL_EN signal of the Wifi module */ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen { diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 5188f96f431e..d36ceecb7328 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -10,7 +10,7 @@ / { model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap3"; vmmcsdio_fixed: fixedregulator-mmcsdio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts index ecb4ef738e07..f6bbea2be54c 100644 --- a/arch/arm/boot/dts/omap3-lilly-dbb056.dts +++ b/arch/arm/boot/dts/omap3-lilly-dbb056.dts @@ -8,7 +8,7 @@ / { model = "INCOstartec LILLY-DBB056 (DM3730)"; - compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap3"; }; &twl { diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index d211bcc31174..a3cf3f443785 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -12,7 +12,7 @@ / { model = "Nokia N9"; - compatible = "nokia,omap3-n9", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "nokia,omap3-n9", "ti,omap3630", "ti,omap3"; }; &i2c2 { diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index b2f480022ff6..cbaf79c4e842 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -12,7 +12,7 @@ / { model = "Nokia N950"; - compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap3"; keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts index 7f04dfad8203..3eb935df04dc 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts @@ -14,5 +14,5 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Alto35"; - compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts index bc5a04e03336..3af8d10d7224 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Chestnut43"; - compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts index 065c31cbf0e2..813e3c9fe3b6 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Gallop43"; - compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts index e38c1c51392c..8405bd9262de 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo35"; - compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts index e6dc23159c4d..b9558d736e79 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo43"; - compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-summit.dts b/arch/arm/boot/dts/omap3-overo-storm-summit.dts index 587c08ce282d..fcfc449f2abe 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-summit.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-summit.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Summit"; - compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts index f57de6010994..6d14466c180a 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts @@ -14,6 +14,6 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi"; - compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts index 281af6c113be..bcf20ff3f281 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts @@ -14,5 +14,5 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on TobiDuo"; - compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts index ea509956d7ac..c0252f8a798a 100644 --- a/arch/arm/boot/dts/omap3-pandora-1ghz.dts +++ b/arch/arm/boot/dts/omap3-pandora-1ghz.dts @@ -16,7 +16,7 @@ / { model = "Pandora Handheld Console 1GHz"; - compatible = "openpandora,omap3-pandora-1ghz", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "openpandora,omap3-pandora-1ghz", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts index eb3893b9535e..4c36bde62491 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3730.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts @@ -8,7 +8,7 @@ / { model = "CompuLab SBC-T3730 with CM-T3730"; - compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap3"; aliases { display0 = &dvi0; diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts index b6879cdc5c13..0591af494184 100644 --- a/arch/arm/boot/dts/omap3-sniper.dts +++ b/arch/arm/boot/dts/omap3-sniper.dts @@ -9,7 +9,7 @@ / { model = "LG Optimus Black"; - compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index ce58b1f208e8..ab52e8d68f76 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -9,7 +9,7 @@ / { model = "TI Zoom3"; - compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts index 4f4888ec9138..fb203e7d37f5 100644 --- a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts +++ b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts @@ -137,8 +137,12 @@ port@3 { reg = <3>; - label = "cpu"; ethernet = <ðport>; + phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; }; port@5 { @@ -208,6 +212,7 @@ /* Hardwired to DSA switch */ speed = <1000>; duplex = <1>; + phy-mode = "rgmii"; }; }; diff --git a/arch/arm/boot/dts/ox810se-wd-mbwe.dts b/arch/arm/boot/dts/ox810se-wd-mbwe.dts deleted file mode 100644 index c59e06ff2423..000000000000 --- a/arch/arm/boot/dts/ox810se-wd-mbwe.dts +++ /dev/null @@ -1,115 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * wd-mbwe.dtsi - Device tree file for Western Digital My Book World Edition - * - * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> - */ - -/dts-v1/; -#include "ox810se.dtsi" - -/ { - model = "Western Digital My Book World Edition"; - - compatible = "wd,mbwe", "oxsemi,ox810se"; - - chosen { - bootargs = "console=ttyS1,115200n8 earlyprintk=serial"; - }; - - memory { - /* 128Mbytes DDR */ - reg = <0x48000000 0x8000000>; - }; - - aliases { - serial1 = &uart1; - gpio0 = &gpio0; - gpio1 = &gpio1; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - power { - label = "power"; - gpios = <&gpio0 0 1>; - linux,code = <0x198>; - }; - - recovery { - label = "recovery"; - gpios = <&gpio0 4 1>; - linux,code = <0xab>; - }; - }; - - leds { - compatible = "gpio-leds"; - - a0 { - label = "activity0"; - gpios = <&gpio0 25 0>; - default-state = "keep"; - }; - - a1 { - label = "activity1"; - gpios = <&gpio0 26 0>; - default-state = "keep"; - }; - - a2 { - label = "activity2"; - gpios = <&gpio0 5 0>; - default-state = "keep"; - }; - - a3 { - label = "activity3"; - gpios = <&gpio0 6 0>; - default-state = "keep"; - }; - - a4 { - label = "activity4"; - gpios = <&gpio0 7 0>; - default-state = "keep"; - }; - - a5 { - label = "activity5"; - gpios = <&gpio1 2 0>; - default-state = "keep"; - }; - }; - - i2c-gpio { - compatible = "i2c-gpio"; - gpios = <&gpio0 3 0 /* sda */ - &gpio0 2 0 /* scl */ - >; - i2c-gpio,delay-us = <2>; /* ~100 kHz */ - #address-cells = <1>; - #size-cells = <0>; - - rtc0: rtc@48 { - compatible = "st,m41t00"; - reg = <0x68>; - }; - }; -}; - -ða { - status = "okay"; -}; - -&uart1 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; -}; diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi deleted file mode 100644 index 96c0745f7b70..000000000000 --- a/arch/arm/boot/dts/ox810se.dtsi +++ /dev/null @@ -1,357 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * ox810se.dtsi - Device tree file for Oxford Semiconductor OX810SE SoC - * - * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> - */ - -#include <dt-bindings/clock/oxsemi,ox810se.h> -#include <dt-bindings/reset/oxsemi,ox810se.h> - -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "oxsemi,ox810se"; - - cpus { - #address-cells = <0>; - #size-cells = <0>; - - cpu { - device_type = "cpu"; - compatible = "arm,arm926ej-s"; - clocks = <&armclk>; - }; - }; - - memory { - device_type = "memory"; - /* Max 256MB @ 0x48000000 */ - reg = <0x48000000 0x10000000>; - }; - - clocks { - osc: oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - gmacclk: gmacclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - }; - - rpsclk: rpsclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <1>; - clocks = <&osc>; - }; - - pll400: pll400 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <733333333>; - }; - - sysclk: sysclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <4>; - clock-mult = <1>; - clocks = <&pll400>; - }; - - armclk: armclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - clocks = <&pll400>; - }; - }; - - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges; - interrupt-parent = <&intc>; - - etha: ethernet@40400000 { - compatible = "oxsemi,ox810se-dwmac", "snps,dwmac"; - reg = <0x40400000 0x2000>; - interrupts = <8>; - interrupt-names = "macirq"; - mac-address = [000000000000]; /* Filled in by U-Boot */ - phy-mode = "rgmii"; - - clocks = <&stdclk 6>, <&gmacclk>; - clock-names = "gmac", "stmmaceth"; - resets = <&reset 6>; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - - status = "disabled"; - }; - - apb-bridge@44000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x44000000 0x1000000>; - - pinctrl: pinctrl { - compatible = "oxsemi,ox810se-pinctrl"; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - - pinctrl_uart0: uart0 { - uart0a { - pins = "gpio31"; - function = "fct3"; - }; - uart0b { - pins = "gpio32"; - function = "fct3"; - }; - }; - - pinctrl_uart0_modem: uart0_modem { - uart0c { - pins = "gpio27"; - function = "fct3"; - }; - uart0d { - pins = "gpio28"; - function = "fct3"; - }; - uart0e { - pins = "gpio29"; - function = "fct3"; - }; - uart0f { - pins = "gpio30"; - function = "fct3"; - }; - uart0g { - pins = "gpio33"; - function = "fct3"; - }; - uart0h { - pins = "gpio34"; - function = "fct3"; - }; - }; - - pinctrl_uart1: uart1 { - uart1a { - pins = "gpio20"; - function = "fct3"; - }; - uart1b { - pins = "gpio22"; - function = "fct3"; - }; - }; - - pinctrl_uart1_modem: uart1_modem { - uart1c { - pins = "gpio8"; - function = "fct3"; - }; - uart1d { - pins = "gpio9"; - function = "fct3"; - }; - uart1e { - pins = "gpio23"; - function = "fct3"; - }; - uart1f { - pins = "gpio24"; - function = "fct3"; - }; - uart1g { - pins = "gpio25"; - function = "fct3"; - }; - uart1h { - pins = "gpio26"; - function = "fct3"; - }; - }; - - pinctrl_uart2: uart2 { - uart2a { - pins = "gpio6"; - function = "fct3"; - }; - uart2b { - pins = "gpio7"; - function = "fct3"; - }; - }; - - pinctrl_uart2_modem: uart2_modem { - uart2c { - pins = "gpio0"; - function = "fct3"; - }; - uart2d { - pins = "gpio1"; - function = "fct3"; - }; - uart2e { - pins = "gpio2"; - function = "fct3"; - }; - uart2f { - pins = "gpio3"; - function = "fct3"; - }; - uart2g { - pins = "gpio4"; - function = "fct3"; - }; - uart2h { - pins = "gpio5"; - function = "fct3"; - }; - }; - }; - - gpio0: gpio@0 { - compatible = "oxsemi,ox810se-gpio"; - reg = <0x000000 0x100000>; - interrupts = <21>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - ngpios = <32>; - oxsemi,gpio-bank = <0>; - gpio-ranges = <&pinctrl 0 0 32>; - }; - - gpio1: gpio@100000 { - compatible = "oxsemi,ox810se-gpio"; - reg = <0x100000 0x100000>; - interrupts = <22>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - ngpios = <3>; - oxsemi,gpio-bank = <1>; - gpio-ranges = <&pinctrl 0 32 3>; - }; - - uart0: serial@200000 { - compatible = "ns16550a"; - reg = <0x200000 0x100000>; - clocks = <&sysclk>; - interrupts = <23>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - resets = <&reset RESET_UART1>; - }; - - uart1: serial@300000 { - compatible = "ns16550a"; - reg = <0x300000 0x100000>; - clocks = <&sysclk>; - interrupts = <24>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - resets = <&reset RESET_UART2>; - }; - - uart2: serial@900000 { - compatible = "ns16550a"; - reg = <0x900000 0x100000>; - clocks = <&sysclk>; - interrupts = <29>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - resets = <&reset RESET_UART3>; - }; - - uart3: serial@a00000 { - compatible = "ns16550a"; - reg = <0xa00000 0x100000>; - clocks = <&sysclk>; - interrupts = <30>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - resets = <&reset RESET_UART4>; - }; - }; - - apb-bridge@45000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x45000000 0x1000000>; - - sys: sys-ctrl@0 { - compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"; - reg = <0x000000 0x100000>; - - reset: reset-controller { - compatible = "oxsemi,ox810se-reset"; - #reset-cells = <1>; - }; - - stdclk: stdclk { - compatible = "oxsemi,ox810se-stdclk"; - #clock-cells = <1>; - }; - }; - - rps@300000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x300000 0x100000>; - - intc: interrupt-controller@0 { - compatible = "oxsemi,ox810se-rps-irq"; - interrupt-controller; - reg = <0 0x200>; - #interrupt-cells = <1>; - valid-mask = <0xffffffff>; - clear-mask = <0xffffffff>; - }; - - timer0: timer@200 { - compatible = "oxsemi,ox810se-rps-timer"; - reg = <0x200 0x40>; - clocks = <&rpsclk>; - interrupts = <4 5>; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts deleted file mode 100644 index c3daceccde55..000000000000 --- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts +++ /dev/null @@ -1,93 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3 - * - * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> - */ - -/dts-v1/; -#include "ox820.dtsi" - -/ { - model = "Cloud Engines PogoPlug Series 3"; - - compatible = "cloudengines,pogoplugv3", "oxsemi,ox820"; - - chosen { - bootargs = "earlyprintk"; - stdout-path = "serial0:115200n8"; - }; - - memory { - /* 128Mbytes DDR */ - reg = <0x60000000 0x8000000>; - }; - - aliases { - serial0 = &uart0; - gpio0 = &gpio0; - gpio1 = &gpio1; - }; - - leds { - compatible = "gpio-leds"; - - blue { - label = "pogoplug:blue"; - gpios = <&gpio0 2 0>; - default-state = "keep"; - }; - - orange { - label = "pogoplug:orange"; - gpios = <&gpio1 16 1>; - default-state = "keep"; - }; - - green { - label = "pogoplug:green"; - gpios = <&gpio1 17 1>; - default-state = "keep"; - }; - }; -}; - -&uart0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; -}; - -&nandc { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - - nand@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - nand-ecc-mode = "soft"; - nand-ecc-algo = "hamming"; - - partition@0 { - label = "boot"; - reg = <0x00000000 0x00e00000>; - read-only; - }; - - partition@e00000 { - label = "ubi"; - reg = <0x00e00000 0x07200000>; - }; - }; -}; - -ða { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_etha_mdio>; -}; diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi deleted file mode 100644 index dde4364892bf..000000000000 --- a/arch/arm/boot/dts/ox820.dtsi +++ /dev/null @@ -1,299 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * ox820.dtsi - Device tree file for Oxford Semiconductor OX820 SoC - * - * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> - */ - -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/clock/oxsemi,ox820.h> -#include <dt-bindings/reset/oxsemi,ox820.h> - -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "oxsemi,ox820"; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - enable-method = "oxsemi,ox820-smp"; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,arm11mpcore"; - clocks = <&armclk>; - reg = <0>; - }; - - cpu@1 { - device_type = "cpu"; - compatible = "arm,arm11mpcore"; - clocks = <&armclk>; - reg = <1>; - }; - }; - - memory { - device_type = "memory"; - /* Max 512MB @ 0x60000000 */ - reg = <0x60000000 0x20000000>; - }; - - clocks { - osc: oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - gmacclk: gmacclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - }; - - sysclk: sysclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <4>; - clock-mult = <1>; - clocks = <&osc>; - }; - - plla: plla { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <850000000>; - }; - - armclk: armclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - clocks = <&plla>; - }; - }; - - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges; - interrupt-parent = <&gic>; - - nandc: nand-controller@41000000 { - compatible = "oxsemi,ox820-nand"; - reg = <0x41000000 0x100000>; - clocks = <&stdclk CLK_820_NAND>; - resets = <&reset RESET_NAND>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - etha: ethernet@40400000 { - compatible = "oxsemi,ox820-dwmac", "snps,dwmac"; - reg = <0x40400000 0x2000>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq", "eth_wake_irq"; - mac-address = [000000000000]; /* Filled in by U-Boot */ - phy-mode = "rgmii"; - - clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>; - clock-names = "gmac", "stmmaceth"; - resets = <&reset RESET_MAC>; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - - status = "disabled"; - }; - - apb-bridge@44000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x44000000 0x1000000>; - - pinctrl: pinctrl { - compatible = "oxsemi,ox820-pinctrl"; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - - pinctrl_uart0: uart0 { - uart0 { - pins = "gpio30", "gpio31"; - function = "fct5"; - }; - }; - - pinctrl_uart0_modem: uart0_modem { - uart0_modem_a { - pins = "gpio24", "gpio24", "gpio26", "gpio27"; - function = "fct4"; - }; - uart0_modem_b { - pins = "gpio28", "gpio29"; - function = "fct5"; - }; - }; - - pinctrl_uart1: uart1 { - uart1 { - pins = "gpio7", "gpio8"; - function = "fct4"; - }; - }; - - pinctrl_uart1_modem: uart1_modem { - uart1_modem { - pins = "gpio5", "gpio6", "gpio40", "gpio41", "gpio42", "gpio43"; - function = "fct4"; - }; - }; - - pinctrl_etha_mdio: etha_mdio { - etha_mdio { - pins = "gpio3", "gpio4"; - function = "fct1"; - }; - }; - - pinctrl_nand: nand { - nand { - pins = "gpio12", "gpio13", "gpio14", "gpio15", - "gpio16", "gpio17", "gpio18", "gpio19", - "gpio20", "gpio21", "gpio22", "gpio23", - "gpio24"; - function = "fct1"; - }; - }; - }; - - gpio0: gpio@0 { - compatible = "oxsemi,ox820-gpio"; - reg = <0x000000 0x100000>; - interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - ngpios = <32>; - oxsemi,gpio-bank = <0>; - gpio-ranges = <&pinctrl 0 0 32>; - }; - - gpio1: gpio@100000 { - compatible = "oxsemi,ox820-gpio"; - reg = <0x100000 0x100000>; - interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - ngpios = <18>; - oxsemi,gpio-bank = <1>; - gpio-ranges = <&pinctrl 0 32 18>; - }; - - uart0: serial@200000 { - compatible = "ns16550a"; - reg = <0x200000 0x100000>; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - clocks = <&sysclk>; - resets = <&reset RESET_UART1>; - }; - - uart1: serial@300000 { - compatible = "ns16550a"; - reg = <0x200000 0x100000>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - clocks = <&sysclk>; - resets = <&reset RESET_UART2>; - }; - - rps@400000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x400000 0x100000>; - - intc: interrupt-controller@0 { - compatible = "oxsemi,ox820-rps-irq", "oxsemi,ox810se-rps-irq"; - interrupt-controller; - reg = <0 0x200>; - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <1>; - valid-mask = <0xffffffff>; - clear-mask = <0xffffffff>; - }; - - timer0: timer@200 { - compatible = "oxsemi,ox820-rps-timer"; - reg = <0x200 0x40>; - clocks = <&sysclk>; - interrupt-parent = <&intc>; - interrupts = <4>; - }; - }; - - sys: sys-ctrl@e00000 { - compatible = "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd"; - reg = <0xe00000 0x200000>; - - reset: reset-controller { - compatible = "oxsemi,ox820-reset", "oxsemi,ox810se-reset"; - #reset-cells = <1>; - }; - - stdclk: stdclk { - compatible = "oxsemi,ox820-stdclk", "oxsemi,ox810se-stdclk"; - #clock-cells = <1>; - }; - }; - }; - - apb-bridge@47000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x47000000 0x1000000>; - - scu: scu@0 { - compatible = "arm,arm11mp-scu"; - reg = <0x0 0x100>; - }; - - local-timer@600 { - compatible = "arm,arm11mp-twd-timer"; - reg = <0x600 0x20>; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3)|IRQ_TYPE_LEVEL_HIGH)>; - clocks = <&armclk>; - }; - - gic: interrupt-controller@1000 { - compatible = "arm,arm11mp-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x1000 0x1000>, - <0x100 0x500>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 92aa2b081901..672b246afbba 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -388,21 +388,37 @@ acc0: clock-controller@2088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu0_aux"; + #clock-cells = <0>; }; acc1: clock-controller@2098000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu1_aux"; + #clock-cells = <0>; }; acc2: clock-controller@20a8000 { compatible = "qcom,kpss-acc-v1"; reg = <0x020a8000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu2_aux"; + #clock-cells = <0>; }; acc3: clock-controller@20b8000 { compatible = "qcom,kpss-acc-v1"; reg = <0x020b8000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu3_aux"; + #clock-cells = <0>; }; saw0: power-controller@2089000 { @@ -879,8 +895,11 @@ }; l2cc: clock-controller@2011000 { - compatible = "qcom,kpss-gcc", "syscon"; + compatible = "qcom,kpss-gcc-apq8064", "qcom,kpss-gcc", "syscon"; reg = <0x2011000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + #clock-cells = <0>; }; rpm: rpm@108000 { @@ -1260,7 +1279,7 @@ gpu_opp_table: opp-table { compatible = "operating-points-v2"; - opp-320000000 { + opp-450000000 { opp-hz = /bits/ 64 <450000000>; }; @@ -1494,8 +1513,8 @@ num-lanes = <1>; #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000>, /* I/O */ - <0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* mem */ + ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00100000>, /* I/O */ + <0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* mem */ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index fabd7455eb8f..b653ea40c441 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -654,25 +654,25 @@ regulator; }; - acc0: clock-controller@f9088000 { + acc0: power-manager@f9088000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>; }; - acc1: clock-controller@f9098000 { + acc1: power-manager@f9098000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>; }; - acc2: clock-controller@f90a8000 { + acc2: power-manager@f90a8000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>; }; - acc3: clock-controller@f90b8000 { + acc3: power-manager@f90b8000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>; diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi index a5a6f3ebb274..d90b4f4c63af 100644 --- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi @@ -8,6 +8,14 @@ model = "ALFA Network AP120C-AC"; compatible = "alfa-network,ap120c-ac", "qcom,ipq4018"; + aliases { + serial0 = &blsp1_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + keys { compatible = "gpio-keys"; @@ -68,7 +76,7 @@ }; }; - usb-power { + usb-power-hog { line-name = "USB-power"; gpios = <1 GPIO_ACTIVE_HIGH>; gpio-hog; @@ -162,6 +170,17 @@ label = "ART"; reg = <0x00170000 0x00010000>; read-only; + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + precal_art_1000: precal@1000 { + reg = <0x1000 0x2f20>; + }; + + precal_art_5000: precal@5000 { + reg = <0x5000 0x2f20>; + }; }; partition@180000 { @@ -178,7 +197,7 @@ }; }; - nand@1 { + flash@1 { compatible = "spi-nand"; reg = <1>; spi-max-frequency = <40000000>; @@ -225,10 +244,14 @@ &wifi0 { status = "okay"; + nvmem-cell-names = "pre-calibration"; + nvmem-cells = <&precal_art_1000>; }; &wifi1 { status = "okay"; + nvmem-cell-names = "pre-calibration"; + nvmem-cells = <&precal_art_5000>; qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC"; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 02e9ea78405d..dfcfb3339c23 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -143,7 +143,6 @@ sleep_clk: sleep_clk { compatible = "fixed-clock"; clock-frequency = <32000>; - clock-output-names = "gcc_sleep_clk_src"; #clock-cells = <0>; }; @@ -190,6 +189,8 @@ #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x1800000 0x60000>; + clocks = <&xo>, <&sleep_clk>; + clock-names = "xo", "sleep_clk"; }; prng: rng@22000 { @@ -325,22 +326,22 @@ status = "disabled"; }; - acc0: clock-controller@b088000 { + acc0: power-manager@b088000 { compatible = "qcom,kpss-acc-v2"; reg = <0x0b088000 0x1000>, <0xb008000 0x1000>; }; - acc1: clock-controller@b098000 { + acc1: power-manager@b098000 { compatible = "qcom,kpss-acc-v2"; reg = <0x0b098000 0x1000>, <0xb008000 0x1000>; }; - acc2: clock-controller@b0a8000 { + acc2: power-manager@b0a8000 { compatible = "qcom,kpss-acc-v2"; reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>; }; - acc3: clock-controller@b0b8000 { + acc3: power-manager@b0b8000 { compatible = "qcom,kpss-acc-v2"; reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>; }; @@ -426,8 +427,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>, - <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>; + ranges = <0x81000000 0x0 0x00000000 0x40200000 0x0 0x00100000>, + <0x82000000 0x0 0x40300000 0x40300000 0x0 0x00d00000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 52d77e105957..af6764770fd1 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -569,16 +569,20 @@ }; l2cc: clock-controller@2011000 { - compatible = "qcom,kpss-gcc", "syscon"; + compatible = "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc", "syscon"; reg = <0x02011000 0x1000>; clocks = <&gcc PLL8_VOTE>, <&pxo_board>; clock-names = "pll8_vote", "pxo"; - clock-output-names = "acpu_l2_aux"; + #clock-cells = <0>; }; acc0: clock-controller@2088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu0_aux"; + #clock-cells = <0>; }; saw0: regulator@2089000 { @@ -590,6 +594,10 @@ acc1: clock-controller@2098000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu1_aux"; + #clock-cells = <0>; }; saw1: regulator@2099000 { @@ -1081,8 +1089,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00010000 /* I/O */ + 0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* MEM */ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -1132,8 +1140,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x31e00000 0x0 0x00010000 /* I/O */ + 0x82000000 0x0 0x2e000000 0x2e000000 0x0 0x03e00000>; /* MEM */ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -1183,8 +1191,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x35e00000 0x0 0x00010000 /* I/O */ + 0x82000000 0x0 0x32000000 0x32000000 0x0 0x03e00000>; /* MEM */ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index 8e9ea61a1e48..b40c52ddf9b4 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -116,7 +116,7 @@ }; l2cc: clock-controller@2011000 { - compatible = "qcom,kpss-gcc", "syscon"; + compatible = "qcom,kpss-gcc-mdm9615", "qcom,kpss-gcc", "syscon"; reg = <0x02011000 0x1000>; }; diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi index c373081bc21b..42acb9ddb8cc 100644 --- a/arch/arm/boot/dts/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> #include <dt-bindings/clock/qcom,mmcc-msm8974.h> +#include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,gcc-msm8974.h> @@ -377,6 +378,11 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>; + clock-names = "xo", + "sleep_clk"; }; mmcc: clock-controller@fd8c0000 { diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 86f76d0feff4..f601b40ebcf4 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -473,7 +473,7 @@ }; l2cc: clock-controller@2082000 { - compatible = "qcom,kpss-gcc", "syscon"; + compatible = "qcom,kpss-gcc-msm8660", "qcom,kpss-gcc", "syscon"; reg = <0x02082000 0x1000>; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index a0369b38fe07..2a668cd535cc 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -182,8 +182,11 @@ }; l2cc: clock-controller@2011000 { - compatible = "qcom,kpss-gcc", "syscon"; + compatible = "qcom,kpss-gcc-msm8960", "qcom,kpss-gcc", "syscon"; reg = <0x2011000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + #clock-cells = <0>; }; rpm: rpm@108000 { @@ -204,11 +207,19 @@ acc0: clock-controller@2088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu0_aux"; + #clock-cells = <0>; }; acc1: clock-controller@2098000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu1_aux"; + #clock-cells = <0>; }; saw0: regulator@2089000 { diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 834ad95515b1..8208012684d4 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -418,22 +418,22 @@ regulator; }; - acc0: clock-controller@f9088000 { + acc0: power-manager@f9088000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>; }; - acc1: clock-controller@f9098000 { + acc1: power-manager@f9098000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>; }; - acc2: clock-controller@f90a8000 { + acc2: power-manager@f90a8000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>; }; - acc3: clock-controller@f90b8000 { + acc3: power-manager@f90b8000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>; }; @@ -1057,7 +1057,7 @@ #power-domain-cells = <1>; reg = <0xfc400000 0x4000>; - clocks = <&xo_board>, + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; clock-names = "xo", "sleep_clk"; diff --git a/arch/arm/boot/dts/qcom-sdx55-t55.dts b/arch/arm/boot/dts/qcom-sdx55-t55.dts index d5343bb0daee..51058b065279 100644 --- a/arch/arm/boot/dts/qcom-sdx55-t55.dts +++ b/arch/arm/boot/dts/qcom-sdx55-t55.dts @@ -242,6 +242,23 @@ status = "okay"; }; +&pcie_phy { + vdda-phy-supply = <&vreg_l1e_bb_1p2>; + vdda-pll-supply = <&vreg_l4e_bb_0p875>; + + status = "okay"; +}; + +&pcie_rc { + perst-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 53 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&pcie_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + &qpic_bam { status = "okay"; }; @@ -261,21 +278,48 @@ }; &remoteproc_mpss { - status = "okay"; memory-region = <&mpss_adsp_mem>; + status = "okay"; +}; + +&tlmm { + pcie_default: pcie-default-state { + clkreq-pins { + pins = "gpio56"; + function = "pcie_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-pins { + pins = "gpio57"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-pins { + pins = "gpio53"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; &usb_hsphy { - status = "okay"; vdda-pll-supply = <&vreg_l4e_bb_0p875>; vdda33-supply = <&vreg_l10e_3p1>; vdda18-supply = <&vreg_l5e_bb_1p7>; + + status = "okay"; }; &usb_qmpphy { - status = "okay"; vdda-phy-supply = <&vreg_l4e_bb_0p875>; vdda-pll-supply = <&vreg_l1e_bb_1p2>; + + status = "okay"; }; &usb { diff --git a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts index ad74ecc2a196..8fadc6e70692 100644 --- a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts +++ b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts @@ -242,19 +242,22 @@ status = "okay"; }; -&pcie0_phy { - status = "okay"; - +&pcie_phy { vdda-phy-supply = <&vreg_l1e_bb_1p2>; vdda-pll-supply = <&vreg_l4e_bb_0p875>; -}; -&pcie_ep { status = "okay"; +}; +&pcie_ep { pinctrl-names = "default"; pinctrl-0 = <&pcie_ep_clkreq_default &pcie_ep_perst_default &pcie_ep_wake_default>; + + reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; + + status = "okay"; }; &qpic_bam { @@ -277,8 +280,8 @@ }; &remoteproc_mpss { - status = "okay"; memory-region = <&mpss_adsp_mem>; + status = "okay"; }; &tlmm { @@ -305,16 +308,18 @@ }; &usb_hsphy { - status = "okay"; vdda-pll-supply = <&vreg_l4e_bb_0p875>; vdda33-supply = <&vreg_l10e_3p1>; vdda18-supply = <&vreg_l5e_bb_1p7>; + + status = "okay"; }; &usb_qmpphy { - status = "okay"; vdda-phy-supply = <&vreg_l4e_bb_0p875>; vdda-pll-supply = <&vreg_l1e_bb_1p2>; + + status = "okay"; }; &usb { diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi index df7303c5c843..342c3d14001e 100644 --- a/arch/arm/boot/dts/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi @@ -304,7 +304,135 @@ status = "disabled"; }; - pcie0_phy: phy@1c07000 { + pcie_rc: pcie@1c00000 { + compatible = "qcom,pcie-sdx55"; + reg = <0x01c00000 0x3000>, + <0x40000000 0xf1d>, + <0x40000f20 0xc8>, + <0x40001000 0x1000>, + <0x40100000 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x40300000 0x0 0x3fd00000>; + + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "msi8"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_PIPE_CLK>, + <&gcc GCC_PCIE_AUX_CLK>, + <&gcc GCC_PCIE_CFG_AHB_CLK>, + <&gcc GCC_PCIE_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_SLV_AXI_CLK>, + <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_SLEEP_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "sleep"; + + assigned-clocks = <&gcc GCC_PCIE_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommu-map = <0x0 &apps_smmu 0x0200 0x1>, + <0x100 &apps_smmu 0x0201 0x1>, + <0x200 &apps_smmu 0x0202 0x1>, + <0x300 &apps_smmu 0x0203 0x1>, + <0x400 &apps_smmu 0x0204 0x1>; + + resets = <&gcc GCC_PCIE_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_GDSC>; + + phys = <&pcie_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie_ep: pcie-ep@1c00000 { + compatible = "qcom,sdx55-pcie-ep"; + reg = <0x01c00000 0x3000>, + <0x40000000 0xf1d>, + <0x40000f20 0xc8>, + <0x40001000 0x1000>, + <0x40200000 0x100000>, + <0x01c03000 0x3000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "addr_space", + "mmio"; + + qcom,perst-regs = <&tcsr 0xb258 0xb270>; + + clocks = <&gcc GCC_PCIE_AUX_CLK>, + <&gcc GCC_PCIE_CFG_AHB_CLK>, + <&gcc GCC_PCIE_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_SLV_AXI_CLK>, + <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_SLEEP_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "sleep", + "ref"; + + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global", + "doorbell"; + resets = <&gcc GCC_PCIE_BCR>; + reset-names = "core"; + power-domains = <&gcc PCIE_GDSC>; + phys = <&pcie_lane>; + phy-names = "pciephy"; + max-link-speed = <3>; + num-lanes = <2>; + + status = "disabled"; + }; + + pcie_phy: phy@1c07000 { compatible = "qcom,sdx55-qmp-pcie-phy"; reg = <0x01c07000 0x1c4>; #address-cells = <1>; @@ -314,7 +442,10 @@ <&gcc GCC_PCIE_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_CLKREF_CLK>, <&gcc GCC_PCIE_RCHNG_PHY_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen"; resets = <&gcc GCC_PCIE_PHY_BCR>; reset-names = "phy"; @@ -324,7 +455,7 @@ status = "disabled"; - pcie0_lane: lanes@1c06000 { + pcie_lane: lanes@1c06000 { reg = <0x01c06000 0x104>, /* tx0 */ <0x01c06200 0x328>, /* rx0 */ <0x01c07200 0x1e8>, /* pcs */ @@ -385,7 +516,7 @@ }; tcsr: syscon@1fcb000 { - compatible = "syscon"; + compatible = "qcom,sdx55-tcsr", "syscon"; reg = <0x01fc0000 0x1000>; }; @@ -401,45 +532,6 @@ status = "disabled"; }; - pcie_ep: pcie-ep@40000000 { - compatible = "qcom,sdx55-pcie-ep"; - reg = <0x01c00000 0x3000>, - <0x40000000 0xf1d>, - <0x40000f20 0xc8>, - <0x40001000 0x1000>, - <0x40200000 0x100000>, - <0x01c03000 0x3000>; - reg-names = "parf", "dbi", "elbi", "atu", "addr_space", - "mmio"; - - qcom,perst-regs = <&tcsr 0xb258 0xb270>; - - clocks = <&gcc GCC_PCIE_AUX_CLK>, - <&gcc GCC_PCIE_CFG_AHB_CLK>, - <&gcc GCC_PCIE_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_SLV_AXI_CLK>, - <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, - <&gcc GCC_PCIE_SLEEP_CLK>, - <&gcc GCC_PCIE_0_CLKREF_CLK>; - clock-names = "aux", "cfg", "bus_master", "bus_slave", - "slave_q2a", "sleep", "ref"; - - interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "global", "doorbell"; - reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; - resets = <&gcc GCC_PCIE_BCR>; - reset-names = "core"; - power-domains = <&gcc PCIE_GDSC>; - phys = <&pcie0_lane>; - phy-names = "pciephy"; - max-link-speed = <3>; - num-lanes = <2>; - - status = "disabled"; - }; - remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sdx55-mpss-pas"; reg = <0x04080000 0x4040>; diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts index ed98c83c141f..57bc3b03d3aa 100644 --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts @@ -245,6 +245,11 @@ status = "okay"; }; +&ipa { + qcom,gsi-loader = "skip"; + status = "okay"; +}; + &qpic_bam { status = "okay"; }; @@ -265,8 +270,8 @@ }; &remoteproc_mpss { - status = "okay"; memory-region = <&mpss_adsp_mem>; + status = "okay"; }; &usb { @@ -278,14 +283,14 @@ }; &usb_hsphy { - status = "okay"; vdda-pll-supply = <&vreg_l4b_0p88>; vdda33-supply = <&vreg_l10b_3p08>; vdda18-supply = <&vreg_l5b_1p8>; + status = "okay"; }; &usb_qmpphy { - status = "okay"; vdda-phy-supply = <&vreg_l4b_0p88>; vdda-pll-supply = <&vreg_l1b_1p2>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi index 192f9f94bc8b..525dd8a1f664 100644 --- a/arch/arm/boot/dts/qcom-sdx65.dtsi +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi @@ -11,6 +11,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/interconnect/qcom,sdx65.h> / { #address-cells = <1>; @@ -223,16 +224,15 @@ "qcom,usb-snps-hs-7nm-phy"; reg = <0xff4000 0x120>; #phy-cells = <0>; - status = "disabled"; clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "ref"; resets = <&gcc GCC_QUSB2PHY_BCR>; + status = "disabled"; }; usb_qmpphy: phy@ff6000 { compatible = "qcom,sdx65-qmp-usb3-uni-phy"; reg = <0x00ff6000 0x1c8>; - status = "disabled"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -246,6 +246,8 @@ <&gcc GCC_USB3_PHY_BCR>; reset-names = "phy", "common"; + status = "disabled"; + usb_ssphy: phy@ff6200 { reg = <0x00ff6e00 0x160>, <0x00ff7000 0x1ec>, @@ -299,6 +301,44 @@ #hwlock-cells = <1>; }; + ipa: ipa@3f40000 { + compatible = "qcom,sdx65-ipa"; + + reg = <0x03f40000 0x10000>, + <0x03f50000 0x5000>, + <0x03e04000 0xfc000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + iommus = <&apps_smmu 0x5e0 0x0>, + <&apps_smmu 0x5e2 0x0>; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI1>, + <&mem_noc MASTER_APPSS_PROC &system_noc SLAVE_IPA_CFG>; + interconnect-names = "memory", + "config"; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sdx55-mpss-pas"; reg = <0x04080000 0x4040>; @@ -355,7 +395,6 @@ usb: usb@a6f8800 { compatible = "qcom,sdx65-dwc3", "qcom,dwc3"; reg = <0x0a6f8800 0x400>; - status = "disabled"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -385,6 +424,8 @@ resets = <&gcc GCC_USB30_BCR>; + status = "disabled"; + usb_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0x0a600000 0xcd00>; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 0af63ddc4473..fa09295052c6 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -196,6 +196,19 @@ &i2c0 { status = "okay"; + + wm8978: codec@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8978"; + reg = <0x1a>; + }; + + eeprom@50 { + compatible = "st,24c01", "atmel,24c01"; + reg = <0x50>; + pagesize = <16>; + }; + touchscreen@55 { compatible = "sitronix,st1232"; reg = <0x55>; @@ -205,12 +218,6 @@ pinctrl-names = "default"; gpios = <&pfc 166 GPIO_ACTIVE_LOW>; }; - - wm8978: codec@1a { - #sound-dai-cells = <0>; - compatible = "wlf,wm8978"; - reg = <0x1a>; - }; }; &i2c2 { diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index 5f05f2b44a48..fd40890bd77b 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "r8a7779.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -66,6 +67,51 @@ vdd33a-supply = <&fixedregulator3v3>; }; + keyboard-irq { + compatible = "gpio-keys"; + + pinctrl-0 = <&keyboard_irq_pins>; + pinctrl-names = "default"; + + interrupt-parent = <&gpio0>; + + key-1 { + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; + linux,code = <KEY_1>; + label = "SW1-1"; + wakeup-source; + debounce-interval = <20>; + }; + key-2 { + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + linux,code = <KEY_2>; + label = "SW1-2"; + wakeup-source; + debounce-interval = <20>; + }; + }; + + keyboard-gpio { + compatible = "gpio-keys-polled"; + poll-interval = <50>; + + pinctrl-0 = <&keyboard_gpio_pins>; + pinctrl-names = "default"; + + key-3 { + gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW1-3"; + debounce-interval = <20>; + }; + key-4 { + gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + linux,code = <KEY_4>; + label = "SW1-4"; + debounce-interval = <20>; + }; + }; + leds { compatible = "gpio-leds"; led2 { @@ -161,6 +207,20 @@ }; }; +&gpio0 { + keyboard-irq-hog { + gpio-hog; + gpios = <17 GPIO_ACTIVE_LOW>, <18 GPIO_ACTIVE_LOW>; + input; + }; +}; + +&i2c0 { + status = "okay"; + + clock-frequency = <100000>; +}; + &irqpin0 { status = "okay"; }; @@ -223,6 +283,15 @@ groups = "hspi0"; function = "hspi0"; }; + + keyboard_irq_pins: keyboard-irq { + pins = "GP_0_17", "GP_0_18"; + bias-pull-up; + }; + keyboard_gpio_pins: keyboard-gpio { + pins = "GP_0_19", "GP_0_20"; + bias-pull-up; + }; }; &sata { diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 39fc58f32df6..97b767d81d92 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -324,6 +324,69 @@ status = "disabled"; }; + pwm0: pwm@ffe50000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe50000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm1: pwm@ffe51000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe51000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@ffe52000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe52000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@ffe53000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe53000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@ffe54000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe54000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@ffe55000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe55000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@ffe56000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe56000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + pfc: pinctrl@fffc0000 { compatible = "renesas,pfc-r8a7779"; reg = <0xfffc0000 0x23c>; @@ -554,7 +617,8 @@ compatible = "renesas,r8a7779-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0xffc80030 4>; - clocks = <&cpg_clocks R8A7779_CLK_S>, + clocks = <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_S>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, @@ -572,20 +636,21 @@ <&cpg_clocks R8A7779_CLK_P>; #clock-cells = <1>; clock-indices = < - R8A7779_CLK_HSPI R8A7779_CLK_TMU2 - R8A7779_CLK_TMU1 R8A7779_CLK_TMU0 - R8A7779_CLK_HSCIF1 R8A7779_CLK_HSCIF0 - R8A7779_CLK_SCIF5 R8A7779_CLK_SCIF4 - R8A7779_CLK_SCIF3 R8A7779_CLK_SCIF2 - R8A7779_CLK_SCIF1 R8A7779_CLK_SCIF0 - R8A7779_CLK_I2C3 R8A7779_CLK_I2C2 - R8A7779_CLK_I2C1 R8A7779_CLK_I2C0 + R8A7779_CLK_PWM R8A7779_CLK_HSPI + R8A7779_CLK_TMU2 R8A7779_CLK_TMU1 + R8A7779_CLK_TMU0 R8A7779_CLK_HSCIF1 + R8A7779_CLK_HSCIF0 R8A7779_CLK_SCIF5 + R8A7779_CLK_SCIF4 R8A7779_CLK_SCIF3 + R8A7779_CLK_SCIF2 R8A7779_CLK_SCIF1 + R8A7779_CLK_SCIF0 R8A7779_CLK_I2C3 + R8A7779_CLK_I2C2 R8A7779_CLK_I2C1 + R8A7779_CLK_I2C0 >; clock-output-names = - "hspi", "tmu2", "tmu1", "tmu0", "hscif1", - "hscif0", "scif5", "scif4", "scif3", "scif2", - "scif1", "scif0", "i2c3", "i2c2", "i2c1", - "i2c0"; + "pwm", "hspi", "tmu2", "tmu1", "tmu0", + "hscif1", "hscif0", "scif5", "scif4", "scif3", + "scif2", "scif1", "scif0", "i2c3", "i2c2", + "i2c1", "i2c0"; }; mstp1_clks: clocks@ffc80034 { compatible = "renesas,r8a7779-mstp-clocks", diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 2f2e483a2c2a..46fb81f5062f 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -376,6 +376,17 @@ reg = <0 0xe6060000 0 0x250>; }; + tpu: pwm@e60f0000 { + compatible = "renesas,tpu-r8a7790", "renesas,tpu"; + reg = <0 0xe60f0000 0 0x148>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a7790-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -1037,6 +1048,76 @@ status = "disabled"; }; + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + can0: can@e6e80000 { compatible = "renesas,can-r8a7790", "renesas,rcar-gen2-can"; diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi index 27fb06ce907e..8b58773e592e 100644 --- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi @@ -5,6 +5,12 @@ * Copyright 2015 Google, Inc */ +/ { + aliases { + mmc1 = &sdmmc; + }; +}; + &io_domains { sdcard-supply = <&vccio_sd>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index e406c8c7c7e5..d838bf0d5d9a 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -10,6 +10,10 @@ #include "rk3288.dtsi" / { + aliases { + mmc0 = &emmc; + }; + chosen { stdout-path = "serial2:115200n8"; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 511ca864c1b2..cb9cdaddffd4 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -1114,7 +1114,7 @@ status = "disabled"; }; - mipi_dsi: mipi@ff960000 { + mipi_dsi: dsi@ff960000 { compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"; reg = <0x0 0xff960000 0x0 0x4000>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; @@ -1125,18 +1125,28 @@ status = "disabled"; ports { - mipi_in: port { + #address-cells = <1>; + #size-cells = <0>; + + mipi_in: port@0 { + reg = <0>; #address-cells = <1>; #size-cells = <0>; + mipi_in_vopb: endpoint@0 { reg = <0>; remote-endpoint = <&vopb_out_mipi>; }; + mipi_in_vopl: endpoint@1 { reg = <1>; remote-endpoint = <&vopl_out_mipi>; }; }; + + mipi_out: port@1 { + reg = <1>; + }; }; }; @@ -1157,7 +1167,6 @@ lvds_in: port@0 { reg = <0>; - #address-cells = <1>; #size-cells = <0>; @@ -1165,11 +1174,16 @@ reg = <0>; remote-endpoint = <&vopb_out_lvds>; }; + lvds_in_vopl: endpoint@1 { reg = <1>; remote-endpoint = <&vopl_out_lvds>; }; }; + + lvds_out: port@1 { + reg = <1>; + }; }; }; @@ -1190,19 +1204,26 @@ ports { #address-cells = <1>; #size-cells = <0>; + edp_in: port@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; + edp_in_vopb: endpoint@0 { reg = <0>; remote-endpoint = <&vopb_out_edp>; }; + edp_in_vopl: endpoint@1 { reg = <1>; remote-endpoint = <&vopl_out_edp>; }; }; + + edp_out: port@1 { + reg = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 12e90a1cc6a1..1a9e4a96b2ff 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -566,7 +566,7 @@ interrupts = <29>; clocks = <&clocks CLK_CSIS>, <&clocks SCLK_CSIS>; - clock-names = "clk_csis", + clock-names = "csis", "sclk_csis"; bus-width = <4>; status = "disabled"; diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts index 8142c017882c..4d741adc16cd 100644 --- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -210,8 +210,8 @@ * As we're dealing with 3wire SPI, we only define SCK * and MOSI (in the spec MOSI is called "SDA"). */ - gpio-sck = <&gpio0 5 GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpio0 4 GPIO_ACTIVE_HIGH>; + sck-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; cs-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; num-chipselects = <1>; diff --git a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi index b2dce3a29f39..27e0c3826789 100644 --- a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi @@ -258,4 +258,133 @@ bias-disable; }; }; + + uart4_idle_pins_a: uart4-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('D', 6, ANALOG)>; /* UART4_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + uart4_sleep_pins_a: uart4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('D', 6, ANALOG)>, /* UART4_TX */ + <STM32_PINMUX('D', 8, ANALOG)>; /* UART4_RX */ + }; + }; + + uart8_pins_a: uart8-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('F', 9, AF8)>; /* UART8_RX */ + bias-pull-up; + }; + }; + + uart8_idle_pins_a: uart8-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 1, ANALOG)>; /* UART8_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('F', 9, AF8)>; /* UART8_RX */ + bias-pull-up; + }; + }; + + uart8_sleep_pins_a: uart8-sleep-0 { + pins { + pinmux = <STM32_PINMUX('E', 1, ANALOG)>, /* UART8_TX */ + <STM32_PINMUX('F', 9, ANALOG)>; /* UART8_RX */ + }; + }; + + usart1_pins_a: usart1-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 0, AF7)>, /* USART1_TX */ + <STM32_PINMUX('C', 2, AF7)>; /* USART1_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 0, AF4)>, /* USART1_RX */ + <STM32_PINMUX('A', 7, AF7)>; /* USART1_CTS_NSS */ + bias-pull-up; + }; + }; + + usart1_idle_pins_a: usart1-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */ + <STM32_PINMUX('A', 7, ANALOG)>; /* USART1_CTS_NSS */ + }; + pins2 { + pinmux = <STM32_PINMUX('C', 2, AF7)>; /* USART1_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('B', 0, AF4)>; /* USART1_RX */ + bias-pull-up; + }; + }; + + usart1_sleep_pins_a: usart1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */ + <STM32_PINMUX('C', 2, ANALOG)>, /* USART1_RTS */ + <STM32_PINMUX('A', 7, ANALOG)>, /* USART1_CTS_NSS */ + <STM32_PINMUX('B', 0, ANALOG)>; /* USART1_RX */ + }; + }; + + usart2_pins_a: usart2-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 12, AF1)>, /* USART2_TX */ + <STM32_PINMUX('D', 4, AF3)>; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 15, AF1)>, /* USART2_RX */ + <STM32_PINMUX('E', 11, AF2)>; /* USART2_CTS_NSS */ + bias-disable; + }; + }; + + usart2_idle_pins_a: usart2-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */ + <STM32_PINMUX('E', 11, ANALOG)>; /* USART2_CTS_NSS */ + }; + pins2 { + pinmux = <STM32_PINMUX('D', 4, AF3)>; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('D', 15, AF1)>; /* USART2_RX */ + bias-disable; + }; + }; + + usart2_sleep_pins_a: usart2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */ + <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */ + <STM32_PINMUX('D', 15, ANALOG)>, /* USART2_RX */ + <STM32_PINMUX('E', 11, ANALOG)>; /* USART2_CTS_NSS */ + }; + }; }; diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi index 5949473cbbfd..d163c267e34c 100644 --- a/arch/arm/boot/dts/stm32mp131.dtsi +++ b/arch/arm/boot/dts/stm32mp131.dtsi @@ -397,12 +397,42 @@ status = "disabled"; }; + usart3: serial@4000f000 { + compatible = "st,stm32h7-uart"; + reg = <0x4000f000 0x400>; + interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART3_K>; + resets = <&rcc USART3_R>; + wakeup-source; + dmas = <&dmamux1 45 0x400 0x5>, + <&dmamux1 46 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + uart4: serial@40010000 { compatible = "st,stm32h7-uart"; reg = <0x40010000 0x400>; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc UART4_K>; resets = <&rcc UART4_R>; + wakeup-source; + dmas = <&dmamux1 63 0x400 0x5>, + <&dmamux1 64 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart5: serial@40011000 { + compatible = "st,stm32h7-uart"; + reg = <0x40011000 0x400>; + interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc UART5_K>; + resets = <&rcc UART5_R>; + wakeup-source; + dmas = <&dmamux1 65 0x400 0x5>, + <&dmamux1 66 0x400 0x1>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -442,6 +472,32 @@ status = "disabled"; }; + uart7: serial@40018000 { + compatible = "st,stm32h7-uart"; + reg = <0x40018000 0x400>; + interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc UART7_K>; + resets = <&rcc UART7_R>; + wakeup-source; + dmas = <&dmamux1 79 0x400 0x5>, + <&dmamux1 80 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart8: serial@40019000 { + compatible = "st,stm32h7-uart"; + reg = <0x40019000 0x400>; + interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc UART8_K>; + resets = <&rcc UART8_R>; + wakeup-source; + dmas = <&dmamux1 81 0x400 0x5>, + <&dmamux1 82 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + timers1: timer@44000000 { #address-cells = <1>; #size-cells = <0>; @@ -524,6 +580,19 @@ }; }; + usart6: serial@44003000 { + compatible = "st,stm32h7-uart"; + reg = <0x44003000 0x400>; + interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART6_K>; + resets = <&rcc USART6_R>; + wakeup-source; + dmas = <&dmamux1 71 0x400 0x5>, + <&dmamux1 72 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + i2s1: audio-controller@44004000 { compatible = "st,stm32h7-i2s"; reg = <0x44004000 0x400>; @@ -748,6 +817,32 @@ status = "disabled"; }; + usart1: serial@4c000000 { + compatible = "st,stm32h7-uart"; + reg = <0x4c000000 0x400>; + interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART1_K>; + resets = <&rcc USART1_R>; + wakeup-source; + dmas = <&dmamux1 41 0x400 0x5>, + <&dmamux1 42 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + usart2: serial@4c001000 { + compatible = "st,stm32h7-uart"; + reg = <0x4c001000 0x400>; + interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART2_K>; + resets = <&rcc USART2_R>; + wakeup-source; + dmas = <&dmamux1 43 0x400 0x5>, + <&dmamux1 44 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + i2s4: audio-controller@4c002000 { compatible = "st,stm32h7-i2s"; reg = <0x4c002000 0x400>; @@ -1137,6 +1232,54 @@ dma-requests = <48>; }; + fmc: memory-controller@58002000 { + compatible = "st,stm32mp1-fmc2-ebi"; + reg = <0x58002000 0x1000>; + ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */ + <1 0 0x64000000 0x04000000>, /* EBI CS 2 */ + <2 0 0x68000000 0x04000000>, /* EBI CS 3 */ + <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */ + <4 0 0x80000000 0x10000000>; /* NAND */ + #address-cells = <2>; + #size-cells = <1>; + clocks = <&rcc FMC_K>; + resets = <&rcc FMC_R>; + status = "disabled"; + + nand-controller@4,0 { + compatible = "st,stm32mp1-fmc2-nfc"; + reg = <4 0x00000000 0x1000>, + <4 0x08010000 0x1000>, + <4 0x08020000 0x1000>, + <4 0x01000000 0x1000>, + <4 0x09010000 0x1000>, + <4 0x09020000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&mdma 24 0x2 0x12000a02 0x0 0x0>, + <&mdma 24 0x2 0x12000a08 0x0 0x0>, + <&mdma 25 0x2 0x12000a0a 0x0 0x0>; + dma-names = "tx", "rx", "ecc"; + status = "disabled"; + }; + }; + + qspi: spi@58003000 { + compatible = "st,stm32f469-qspi"; + reg = <0x58003000 0x1000>, <0x70000000 0x10000000>; + reg-names = "qspi", "qspi_mm"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&mdma 26 0x2 0x10100002 0x0 0x0>, + <&mdma 26 0x2 0x10100008 0x0 0x0>; + dma-names = "tx", "rx"; + clocks = <&rcc QSPI_K>; + resets = <&rcc QSPI_R>; + status = "disabled"; + }; + sdmmc1: mmc@58005000 { compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x20253180>; diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts index c40686cb2b9a..f0900ca672b5 100644 --- a/arch/arm/boot/dts/stm32mp135f-dk.dts +++ b/arch/arm/boot/dts/stm32mp135f-dk.dts @@ -19,6 +19,13 @@ aliases { serial0 = &uart4; + serial1 = &usart1; + serial2 = &uart8; + serial3 = &usart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; }; memory@c0000000 { @@ -267,8 +274,41 @@ }; &uart4 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep", "idle"; pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&uart8 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart8_pins_a>; + pinctrl-1 = <&uart8_sleep_pins_a>; + pinctrl-2 = <&uart8_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; +}; + +&usart1 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart1_pins_a>; + pinctrl-1 = <&usart1_sleep_pins_a>; + pinctrl-2 = <&usart1_idle_pins_a>; + uart-has-rtscts; + status = "disabled"; +}; + +/* Bluetooth */ +&usart2 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart2_pins_a>; + pinctrl-1 = <&usart2_sleep_pins_a>; + pinctrl-2 = <&usart2_idle_pins_a>; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index a9d2bec99014..e86d989dd351 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -1880,6 +1880,21 @@ }; }; + spi1_pins_b: spi1-1 { + pins1 { + pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */ + <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */ + bias-disable; + }; + }; + spi2_pins_a: spi2-0 { pins1 { pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */ @@ -2163,7 +2178,7 @@ <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */ bias-disable; drive-push-pull; - slew-rate = <3>; + slew-rate = <0>; }; pins2 { pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */ @@ -2181,7 +2196,7 @@ pinmux = <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */ bias-disable; drive-push-pull; - slew-rate = <3>; + slew-rate = <0>; }; pins3 { pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */ @@ -2448,19 +2463,4 @@ bias-disable; }; }; - - spi1_pins_b: spi1-1 { - pins1 { - pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */ - <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - - pins2 { - pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */ - bias-disable; - }; - }; }; diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts index 4c8be9c8eb20..0da3667ab1e0 100644 --- a/arch/arm/boot/dts/stm32mp157a-dk1.dts +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts @@ -17,9 +17,6 @@ aliases { ethernet0 = ðernet0; - serial0 = &uart4; - serial1 = &usart3; - serial2 = &uart7; }; chosen { diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts index 2bc92ef3aeb9..ab13e340f4ef 100644 --- a/arch/arm/boot/dts/stm32mp157c-dk2.dts +++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts @@ -18,9 +18,6 @@ aliases { ethernet0 = ðernet0; - serial0 = &uart4; - serial1 = &usart3; - serial2 = &uart7; serial3 = &usart2; }; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index b1eb688a278a..8beb901be506 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -16,6 +16,10 @@ model = "STMicroelectronics STM32MP157C eval daughter"; compatible = "st,stm32mp157c-ed1", "st,stm32mp157"; + aliases { + serial0 = &uart4; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -65,15 +69,6 @@ reg = <0x38000000 0x10000>; no-map; }; - - gpu_reserved: gpu@e8000000 { - reg = <0xe8000000 0x8000000>; - no-map; - }; - }; - - aliases { - serial0 = &uart4; }; sd_switch: regulator-sd_switch { @@ -140,10 +135,6 @@ status = "okay"; }; -&gpu { - contiguous-area = <&gpu_reserved>; -}; - &hash1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi index 7d11c50b9e40..b01470a9a3d5 100644 --- a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi +++ b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi @@ -68,11 +68,6 @@ reg = <0x38000000 0x10000>; no-map; }; - - gpu_reserved: gpu@dc000000 { - reg = <0xdc000000 0x4000000>; - no-map; - }; }; led: gpio_leds { @@ -183,10 +178,6 @@ }; }; -&gpu { - contiguous-area = <&gpu_reserved>; -}; - &hash1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 542226cfcfdf..ba8e9d9a42fa 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -14,16 +14,15 @@ model = "STMicroelectronics STM32MP157C eval daughter on eval mother"; compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157"; - chosen { - stdout-path = "serial0:115200n8"; - }; - aliases { - serial0 = &uart4; serial1 = &usart3; ethernet0 = ðernet0; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + clocks { clk_ext_camera: clk-ext-camera { #clock-cells = <0>; diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts index cb00ce7cec8b..407ed3952f75 100644 --- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts +++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts @@ -73,7 +73,7 @@ }; panel: panel { - compatible = "edt,etm0700g0edh6", "simple-panel"; + compatible = "edt,etm0700g0edh6"; backlight = <&backlight>; enable-gpios = <&gpiod 4 GPIO_ACTIVE_HIGH>; power-supply = <®_3v3>; diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi index 2d9461006810..e22871dc580c 100644 --- a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi +++ b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi @@ -62,11 +62,6 @@ reg = <0x38000000 0x10000>; no-map; }; - - gpu_reserved: gpu@d4000000 { - reg = <0xd4000000 0x4000000>; - no-map; - }; }; led { @@ -80,11 +75,6 @@ }; }; -&gpu { - contiguous-area = <&gpu_reserved>; - status = "okay"; -}; - &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index 11370ae0d868..cefeeb00fc22 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -8,6 +8,12 @@ #include <dt-bindings/mfd/st,stpmic1.h> / { + aliases { + serial0 = &uart4; + serial1 = &usart3; + serial2 = &uart7; + }; + memory@c0000000 { device_type = "memory"; reg = <0xc0000000 0x20000000>; @@ -53,11 +59,6 @@ reg = <0x38000000 0x10000>; no-map; }; - - gpu_reserved: gpu@d4000000 { - reg = <0xd4000000 0x4000000>; - no-map; - }; }; led { @@ -151,10 +152,6 @@ }; }; -&gpu { - contiguous-area = <&gpu_reserved>; -}; - &hash1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi index 935b7084b5a2..a43965c86fe8 100644 --- a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi @@ -210,8 +210,8 @@ &m4_rproc { memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, <&vdev0vring1>, <&vdev0buffer>; - mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; - mbox-names = "vq0", "vq1", "shutdown"; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>; + mbox-names = "vq0", "vq1", "shutdown", "detach"; interrupt-parent = <&exti>; interrupts = <68 1>; status = "okay"; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 6cdadba6a3ac..5cce4918f84c 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -822,7 +822,7 @@ clocks = <&ccu CLK_APB2_UART0>; resets = <&ccu RST_APB2_UART0>; dmas = <&dma 6>, <&dma 6>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -835,7 +835,7 @@ clocks = <&ccu CLK_APB2_UART1>; resets = <&ccu RST_APB2_UART1>; dmas = <&dma 7>, <&dma 7>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -848,7 +848,7 @@ clocks = <&ccu CLK_APB2_UART2>; resets = <&ccu RST_APB2_UART2>; dmas = <&dma 8>, <&dma 8>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -861,7 +861,7 @@ clocks = <&ccu CLK_APB2_UART3>; resets = <&ccu RST_APB2_UART3>; dmas = <&dma 9>, <&dma 9>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -874,7 +874,7 @@ clocks = <&ccu CLK_APB2_UART4>; resets = <&ccu RST_APB2_UART4>; dmas = <&dma 10>, <&dma 10>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -887,7 +887,7 @@ clocks = <&ccu CLK_APB2_UART5>; resets = <&ccu RST_APB2_UART5>; dmas = <&dma 22>, <&dma 22>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index f630ab55bb6a..4aa9d88c9ea3 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -490,7 +490,7 @@ clocks = <&ccu CLK_BUS_UART0>; resets = <&ccu RST_BUS_UART0>; dmas = <&dma 6>, <&dma 6>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -503,7 +503,7 @@ clocks = <&ccu CLK_BUS_UART1>; resets = <&ccu RST_BUS_UART1>; dmas = <&dma 7>, <&dma 7>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -516,7 +516,7 @@ clocks = <&ccu CLK_BUS_UART2>; resets = <&ccu RST_BUS_UART2>; dmas = <&dma 8>, <&dma 8>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -529,7 +529,7 @@ clocks = <&ccu CLK_BUS_UART3>; resets = <&ccu RST_BUS_UART3>; dmas = <&dma 9>, <&dma 9>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -542,7 +542,7 @@ clocks = <&ccu CLK_BUS_UART4>; resets = <&ccu RST_BUS_UART4>; dmas = <&dma 10>, <&dma 10>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun8i-t113s-mangopi-mq-r-t113.dts b/arch/arm/boot/dts/sun8i-t113s-mangopi-mq-r-t113.dts new file mode 100644 index 000000000000..94e24b5926dd --- /dev/null +++ b/arch/arm/boot/dts/sun8i-t113s-mangopi-mq-r-t113.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// Copyright (C) 2022 Arm Ltd. + +#include <dt-bindings/interrupt-controller/irq.h> + +/dts-v1/; + +#include "sun8i-t113s.dtsi" +#include "sunxi-d1s-t113-mangopi-mq-r.dtsi" + +/ { + model = "MangoPi MQ-R-T113"; + compatible = "widora,mangopi-mq-r-t113", "allwinner,sun8i-t113s"; + + aliases { + ethernet0 = &rtl8189ftv; + }; +}; + +&cpu0 { + cpu-supply = <®_vcc_core>; +}; + +&cpu1 { + cpu-supply = <®_vcc_core>; +}; + +&mmc1 { + rtl8189ftv: wifi@1 { + reg = <1>; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 = WL_WAKE_AP */ + interrupt-names = "host-wake"; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-t113s.dtsi b/arch/arm/boot/dts/sun8i-t113s.dtsi new file mode 100644 index 000000000000..804aa197a24f --- /dev/null +++ b/arch/arm/boot/dts/sun8i-t113s.dtsi @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// Copyright (C) 2022 Arm Ltd. + +#define SOC_PERIPHERAL_IRQ(nr) GIC_SPI nr + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <riscv/allwinner/sunxi-d1s-t113.dtsi> +#include <riscv/allwinner/sunxi-d1-t113.dtsi> + +/ { + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; + }; + }; + + gic: interrupt-controller@1c81000 { + compatible = "arm,gic-400"; + reg = <0x03021000 0x1000>, + <0x03022000 0x2000>, + <0x03024000 0x2000>, + <0x03026000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index db194c606fdc..b001251644f7 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -479,7 +479,7 @@ reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART0>; dmas = <&dma 6>, <&dma 6>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; @@ -492,7 +492,7 @@ reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART1>; dmas = <&dma 7>, <&dma 7>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; resets = <&ccu RST_BUS_UART1>; status = "disabled"; }; @@ -505,7 +505,7 @@ reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART2>; dmas = <&dma 8>, <&dma 8>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; resets = <&ccu RST_BUS_UART2>; pinctrl-0 = <&uart2_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts index 04e59b8381cb..43896723a994 100644 --- a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts +++ b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts @@ -6,6 +6,8 @@ /dts-v1/; #include "suniv-f1c100s.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Lichee Pi Nano"; compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s"; @@ -50,8 +52,22 @@ }; }; +&otg_sram { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pe_pins>; status = "okay"; }; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 4 2 GPIO_ACTIVE_HIGH>; /* PE2 */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi index 9455d27e516e..3c61d59ab5f8 100644 --- a/arch/arm/boot/dts/suniv-f1c100s.dtsi +++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi @@ -133,6 +133,32 @@ #size-cells = <0>; }; + usb_otg: usb@1c13000 { + compatible = "allwinner,suniv-f1c100s-musb"; + reg = <0x01c13000 0x0400>; + clocks = <&ccu CLK_BUS_OTG>; + resets = <&ccu RST_BUS_OTG>; + interrupts = <26>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + allwinner,sram = <&otg_sram 1>; + status = "disabled"; + }; + + usbphy: phy@1c13400 { + compatible = "allwinner,suniv-f1c100s-usb-phy"; + reg = <0x01c13400 0x10>; + reg-names = "phy_ctrl"; + clocks = <&ccu CLK_USB_PHY0>; + clock-names = "usb0_phy"; + resets = <&ccu RST_USB_PHY0>; + reset-names = "usb0_reset"; + #phy-cells = <1>; + status = "disabled"; + }; + ccu: clock@1c20000 { compatible = "allwinner,suniv-f1c100s-ccu"; reg = <0x01c20000 0x400>; @@ -181,6 +207,12 @@ pins = "PE0", "PE1"; function = "uart0"; }; + + /omit-if-no-ref/ + uart1_pa_pins: uart1-pa-pins { + pins = "PA2", "PA3"; + function = "uart1"; + }; }; i2c0: i2c@1c27000 { diff --git a/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts b/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts new file mode 100644 index 000000000000..2d2a3f026df3 --- /dev/null +++ b/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Arm Ltd, + * based on work: + * Copyright 2022 Icenowy Zheng <uwu@icenowy.me> + */ + +/dts-v1/; +#include "suniv-f1c100s.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Lctech Pi F1C200s"; + compatible = "lctech,pi-f1c200s", "allwinner,suniv-f1c200s", + "allwinner,suniv-f1c100s"; + + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_vcc3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&mmc0 { + broken-cd; + bus-width = <4>; + disable-wp; + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pc_pins>; + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pa_pins>; + status = "okay"; +}; + +/* + * This is a Type-C socket, but CC1/2 are not connected, and VBUS is connected + * to Vin, which supplies the board. Host mode works (if the board is powered + * otherwise), but peripheral is probably the intention. + */ +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts b/arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts new file mode 100644 index 000000000000..184c245041a6 --- /dev/null +++ b/arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts @@ -0,0 +1,81 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Icenowy Zheng <uwu@icenowy.me> + */ + +/dts-v1/; +#include "suniv-f1c100s.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Popcorn Computer PopStick v1.1"; + compatible = "sourceparts,popstick-v1.1", "sourceparts,popstick", + "allwinner,suniv-f1c200s", "allwinner,suniv-f1c100s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pio 4 6 GPIO_ACTIVE_HIGH>; /* PE6 */ + linux,default-trigger = "heartbeat"; + }; + }; + + reg_vcc3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&mmc0 { + cd-gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */ + bus-width = <4>; + disable-wp; + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pc_pins>; + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pe_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sunxi-d1s-t113-mangopi-mq-r.dtsi b/arch/arm/boot/dts/sunxi-d1s-t113-mangopi-mq-r.dtsi new file mode 100644 index 000000000000..e9bc749488bb --- /dev/null +++ b/arch/arm/boot/dts/sunxi-d1s-t113-mangopi-mq-r.dtsi @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// Copyright (C) 2022 Arm Ltd. +/* + * Common peripherals and configurations for MangoPi MQ-R boards. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + aliases { + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial3:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&pio 3 22 GPIO_ACTIVE_LOW>; /* PD22 */ + }; + }; + + /* board wide 5V supply directly from the USB-C socket */ + reg_vcc5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + /* SY8008 DC/DC regulator on the board */ + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_vcc5v>; + }; + + /* SY8008 DC/DC regulator on the board, also supplying VDD-SYS */ + reg_vcc_core: regulator-core { + compatible = "regulator-fixed"; + regulator-name = "vcc-core"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + vin-supply = <®_vcc5v>; + }; + + /* XC6206 LDO on the board */ + reg_avdd2v8: regulator-avdd { + compatible = "regulator-fixed"; + regulator-name = "avdd2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <®_3v3>; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */ + }; +}; + +&dcxo { + clock-frequency = <24000000>; +}; + +&ehci1 { + status = "okay"; +}; + +&mmc0 { + pinctrl-0 = <&mmc0_pins>; + pinctrl-names = "default"; + vmmc-supply = <®_3v3>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + pinctrl-0 = <&mmc1_pins>; + pinctrl-names = "default"; + vmmc-supply = <®_3v3>; + non-removable; + bus-width = <4>; + mmc-pwrseq = <&wifi_pwrseq>; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + vcc-pb-supply = <®_3v3>; + vcc-pd-supply = <®_3v3>; + vcc-pe-supply = <®_avdd2v8>; + vcc-pf-supply = <®_3v3>; + vcc-pg-supply = <®_3v3>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pb_pins>; + status = "okay"; +}; + +/* The USB-C socket has its CC pins pulled to GND, so is hardwired as a UFP. */ +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_vcc5v>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 686193bd6bd9..ade1cd50e445 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -710,7 +710,7 @@ clocks = <&ccu CLK_BUS_UART0>; resets = <&ccu RST_BUS_UART0>; dmas = <&dma 6>, <&dma 6>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -723,7 +723,7 @@ clocks = <&ccu CLK_BUS_UART1>; resets = <&ccu RST_BUS_UART1>; dmas = <&dma 7>, <&dma 7>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -736,7 +736,7 @@ clocks = <&ccu CLK_BUS_UART2>; resets = <&ccu RST_BUS_UART2>; dmas = <&dma 8>, <&dma 8>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -749,7 +749,7 @@ clocks = <&ccu CLK_BUS_UART3>; resets = <&ccu RST_BUS_UART3>; dmas = <&dma 9>, <&dma 9>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/tegra20-asus-tf101.dts b/arch/arm/boot/dts/tegra20-asus-tf101.dts index 7b2969656ec9..c2a9c3fb5b33 100644 --- a/arch/arm/boot/dts/tegra20-asus-tf101.dts +++ b/arch/arm/boot/dts/tegra20-asus-tf101.dts @@ -520,10 +520,10 @@ micdet-delay = <100>; gpio-cfg = < - 0xffffffff /* don't touch */ - 0xffffffff /* don't touch */ + 0x00000600 /* DMIC_LR, output */ + 0x00000680 /* DMIC_DAT, input */ 0x00000000 /* Speaker-enable GPIO, output, low */ - 0x00000400 /* Mic bias current detect */ + 0xffffffff /* don't touch */ 0xffffffff /* don't touch */ >; @@ -577,9 +577,9 @@ vdd-supply = <&vdd_1v8_sys>; vddio-supply = <&vdd_1v8_sys>; - mount-matrix = "1", "0", "0", - "0", "1", "0", - "0", "0", "1"; + mount-matrix = "-1", "0", "0", + "0", "-1", "0", + "0", "0", "-1"; }; }; }; @@ -1184,15 +1184,16 @@ "Int Spk", "RON", "Int Spk", "LOP", "Int Spk", "LON", - "Mic Jack", "MICBIAS", - "IN1L", "Mic Jack"; + "IN2L", "Mic Jack", + "DMICDAT", "Int Mic"; nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&wm8903>; nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; - nvidia,headset; + nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>; + nvidia,coupled-mic-hp-det; clocks = <&tegra_car TEGRA20_CLK_PLL_A>, <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, diff --git a/arch/arm/boot/dts/tegra30-asus-tf201.dts b/arch/arm/boot/dts/tegra30-asus-tf201.dts index 3c2b9e93e028..0406c5a69c12 100644 --- a/arch/arm/boot/dts/tegra30-asus-tf201.dts +++ b/arch/arm/boot/dts/tegra30-asus-tf201.dts @@ -624,4 +624,21 @@ /delete-node/ opp-800000000-1300; /delete-node/ opp-900000000-1350; }; + + sound { + compatible = "asus,tegra-audio-rt5631-tf201", + "nvidia,tegra-audio-rt5631"; + nvidia,model = "Asus Transformer Prime TF201 RT5631"; + + nvidia,audio-routing = + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR", + "Int Spk", "SPOL", + "Int Spk", "SPOR", + "MIC1", "MIC Bias1", + "MIC Bias1", "Mic Jack", + "DMIC", "Int Mic"; + + nvidia,audio-codec = <&rt5631>; + }; }; diff --git a/arch/arm/boot/dts/tegra30-asus-tf300t.dts b/arch/arm/boot/dts/tegra30-asus-tf300t.dts index 506ae3626731..970a1f08dc8c 100644 --- a/arch/arm/boot/dts/tegra30-asus-tf300t.dts +++ b/arch/arm/boot/dts/tegra30-asus-tf300t.dts @@ -128,8 +128,8 @@ micdet-delay = <100>; gpio-cfg = < - 0xffffffff /* don't touch */ - 0xffffffff /* don't touch */ + 0x00000600 /* DMIC_LR, output */ + 0x00000680 /* DMIC_DAT, input */ 0x00000000 /* Speaker-enable GPIO, output, low */ 0xffffffff /* don't touch */ 0xffffffff /* don't touch */ @@ -1023,12 +1023,10 @@ "Int Spk", "RON", "Int Spk", "LOP", "Int Spk", "LON", - "IN1L", "Mic Jack", "IN2L", "Mic Jack", "DMICDAT", "Int Mic"; nvidia,audio-codec = <&wm8903>; nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; - nvidia,headset; }; }; diff --git a/arch/arm/boot/dts/tegra30-asus-tf300tg.dts b/arch/arm/boot/dts/tegra30-asus-tf300tg.dts index 573deeafb7ba..4861db8e1e59 100644 --- a/arch/arm/boot/dts/tegra30-asus-tf300tg.dts +++ b/arch/arm/boot/dts/tegra30-asus-tf300tg.dts @@ -1084,4 +1084,21 @@ /delete-node/ opp-800000000; /delete-node/ opp-900000000; }; + + sound { + compatible = "asus,tegra-audio-rt5631-tf300tg", + "nvidia,tegra-audio-rt5631"; + nvidia,model = "Asus Transformer Pad TF300TG RT5631"; + + nvidia,audio-routing = + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR", + "Int Spk", "SPOL", + "Int Spk", "SPOR", + "MIC1", "MIC Bias1", + "MIC Bias1", "Mic Jack", + "DMIC", "Int Mic"; + + nvidia,audio-codec = <&rt5631>; + }; }; diff --git a/arch/arm/boot/dts/tegra30-asus-tf700t.dts b/arch/arm/boot/dts/tegra30-asus-tf700t.dts index e7fe8c7a7435..efde7dad718a 100644 --- a/arch/arm/boot/dts/tegra30-asus-tf700t.dts +++ b/arch/arm/boot/dts/tegra30-asus-tf700t.dts @@ -820,4 +820,21 @@ enable-active-high; vin-supply = <&vdd_3v3_sys>; }; + + sound { + compatible = "asus,tegra-audio-rt5631-tf700t", + "nvidia,tegra-audio-rt5631"; + nvidia,model = "Asus Transformer Infinity TF700T RT5631"; + + nvidia,audio-routing = + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR", + "Int Spk", "SPOL", + "Int Spk", "SPOR", + "MIC1", "MIC Bias1", + "MIC Bias1", "Mic Jack", + "DMIC", "Int Mic"; + + nvidia,audio-codec = <&rt5631>; + }; }; diff --git a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi index 1861b2de2dc3..bdb898ad6262 100644 --- a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi @@ -558,7 +558,7 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - spi2_cs1_n_pw2 { + hp_detect { nvidia,pins = "spi2_cs1_n_pw2"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -566,10 +566,10 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - spi2_sck_px2 { + mic_detect { nvidia,pins = "spi2_sck_px2"; nvidia,function = "spi2"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; @@ -1674,7 +1674,8 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; - nvidia,hp-mute-gpios = <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_LOW>; + nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_LOW>; + nvidia,coupled-mic-hp-det; clocks = <&tegra_car TEGRA30_CLK_PLL_A>, <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, diff --git a/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi b/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi index d100a1a8b705..a2d557155114 100644 --- a/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi +++ b/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi @@ -210,6 +210,20 @@ opp-suspend; }; + opp-266500000-1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <266500000>; + opp-supported-hw = <0x0007>; + required-opps = <&core_opp_1000>; + }; + + opp-266500000-1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <266500000>; + opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1250>; + }; + opp-333500000-1000 { opp-microvolt = <1000000 1000000 1350000>; opp-hz = /bits/ 64 <333500000>; @@ -424,6 +438,12 @@ opp-suspend; }; + opp-266500000 { + opp-hz = /bits/ 64 <266500000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <2132000>; + }; + opp-333500000 { opp-hz = /bits/ 64 <333500000>; opp-supported-hw = <0x000F>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index b6fcac6016e0..9cba67b54111 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -1283,10 +1283,7 @@ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&{/cpus/cpu@0}>, - <&{/cpus/cpu@1}>, - <&{/cpus/cpu@2}>, - <&{/cpus/cpu@3}>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; }; thermal-zones { |