diff options
Diffstat (limited to 'arch/arm/kernel/head-nommu.S')
| -rw-r--r-- | arch/arm/kernel/head-nommu.S | 392 |
1 files changed, 332 insertions, 60 deletions
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 2e21e08de747..b9d6818f1ee1 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -1,28 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/kernel/head-nommu.S * * Copyright (C) 1994-2002 Russell King * Copyright (C) 2003-2006 Hyok S. Choi * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Common kernel startup code (non-paged MM) - * */ #include <linux/linkage.h> #include <linux/init.h> +#include <linux/errno.h> #include <asm/assembler.h> #include <asm/ptrace.h> #include <asm/asm-offsets.h> -#include <asm/memory.h> +#include <asm/page.h> #include <asm/cp15.h> #include <asm/thread_info.h> #include <asm/v7m.h> #include <asm/mpu.h> -#include <asm/page.h> /* * Kernel startup entry point. @@ -52,7 +48,11 @@ ENTRY(stext) THUMB(1: ) #endif - setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode +#ifdef CONFIG_ARM_VIRT_EXT + bl __hyp_stub_install +#endif + @ ensure svc mode and all interrupts masked + safe_svcmode_maskall r9 @ and irqs disabled #if defined(CONFIG_CPU_CP15) mrc p15, 0, r9, c0, c0 @ get processor id @@ -67,14 +67,6 @@ ENTRY(stext) beq __error_p @ yes, error 'p' #ifdef CONFIG_ARM_MPU - /* Calculate the size of a region covering just the kernel */ - ldr r5, =PLAT_PHYS_OFFSET @ Region start: PHYS_OFFSET - ldr r6, =(_end) @ Cover whole kernel - sub r6, r6, r5 @ Minimum size of region to map - clz r6, r6 @ Region size must be 2^N... - rsb r6, r6, #31 @ ...so round up region size - lsl r6, r6, #MPU_RSR_SZ @ Put size in right field - orr r6, r6, #(1 << MPU_RSR_EN) @ Set region enabled bit bl __setup_mpu #endif @@ -82,8 +74,8 @@ ENTRY(stext) ldr r12, [r10, #PROCINFO_INITFUNC] add r12, r12, r10 ret r12 -1: bl __after_proc_init - b __mmap_switched +1: ldr lr, =__mmap_switched + b __after_proc_init ENDPROC(stext) #ifdef CONFIG_SMP @@ -96,7 +88,11 @@ ENTRY(secondary_startup) * the processor type - there is no need to check the machine type * as it has already been validated by the primary processor. */ - setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 +#ifdef CONFIG_ARM_VIRT_EXT + bl __hyp_stub_install_secondary +#endif + safe_svcmode_maskall r9 + #ifndef CONFIG_CPU_CP15 ldr r9, =CONFIG_PROCESSOR_ID #else @@ -109,9 +105,7 @@ ENTRY(secondary_startup) ldr r7, __secondary_data #ifdef CONFIG_ARM_MPU - /* Use MPU region info supplied by __cpu_up */ - ldr r6, [r7] @ get secondary_data.mpu_szr - bl __setup_mpu @ Initialize the MPU + bl __secondary_setup_mpu @ Initialize the MPU #endif badr lr, 1f @ return (PIC) address @@ -119,7 +113,9 @@ ENTRY(secondary_startup) add r12, r12, r10 ret r12 1: bl __after_proc_init + ldr r7, __secondary_data @ reload r7 ldr sp, [r7, #12] @ set up the stack pointer + ldr r0, [r7, #16] @ set up task pointer mov fp, #0 b secondary_start_kernel ENDPROC(secondary_startup) @@ -132,12 +128,45 @@ __secondary_data: /* * Set the Control Register and Read the process ID. */ + .text __after_proc_init: +M_CLASS(movw r12, #:lower16:BASEADDR_V7M_SCB) +M_CLASS(movt r12, #:upper16:BASEADDR_V7M_SCB) +#ifdef CONFIG_ARM_MPU +M_CLASS(ldr r3, [r12, 0x50]) +AR_CLASS(mrc p15, 0, r3, c0, c1, 4) @ Read ID_MMFR0 + and r3, r3, #(MMFR0_PMSA) @ PMSA field + teq r3, #(MMFR0_PMSAv7) @ PMSA v7 + beq 1f + teq r3, #(MMFR0_PMSAv8) @ PMSA v8 + /* + * Memory region attributes for PMSAv8: + * + * n = AttrIndx[2:0] + * n MAIR + * DEVICE_nGnRnE 000 00000000 + * NORMAL 001 11111111 + */ + ldreq r3, =PMSAv8_MAIR(0x00, PMSAv8_RGN_DEVICE_nGnRnE) | \ + PMSAv8_MAIR(0xff, PMSAv8_RGN_NORMAL) +AR_CLASS(mcreq p15, 0, r3, c10, c2, 0) @ MAIR 0 +M_CLASS(streq r3, [r12, #PMSAv8_MAIR0]) + moveq r3, #0 +AR_CLASS(mcreq p15, 0, r3, c10, c2, 1) @ MAIR 1 +M_CLASS(streq r3, [r12, #PMSAv8_MAIR1]) + +1: +#endif #ifdef CONFIG_CPU_CP15 /* * CP15 system control register value returned in r0 from * the CPU init function. */ + +#ifdef CONFIG_ARM_MPU + biceq r0, r0, #CR_BR @ Disable the 'default mem-map' + orreq r0, r0, #CR_M @ Set SCTRL.M (MPU on) +#endif #if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6 orr r0, r0, #CR_A #else @@ -153,7 +182,15 @@ __after_proc_init: bic r0, r0, #CR_I #endif mcr p15, 0, r0, c1, c0, 0 @ write control reg + instr_sync #elif defined (CONFIG_CPU_V7M) +#ifdef CONFIG_ARM_MPU + ldreq r3, [r12, MPU_CTRL] + biceq r3, #MPU_CTRL_PRIVDEFENA + orreq r3, #MPU_CTRL_ENABLE + streq r3, [r12, MPU_CTRL] + isb +#endif /* For V7M systems we want to modify the CCR similarly to the SCTLR */ #ifdef CONFIG_CPU_DCACHE_DISABLE bic r0, r0, #V7M_SCB_CCR_DC @@ -164,9 +201,9 @@ __after_proc_init: #ifdef CONFIG_CPU_ICACHE_DISABLE bic r0, r0, #V7M_SCB_CCR_IC #endif - movw r3, #:lower16:(BASEADDR_V7M_SCB + V7M_SCB_CCR) - movt r3, #:upper16:(BASEADDR_V7M_SCB + V7M_SCB_CCR) - str r0, [r3] + str r0, [r12, V7M_SCB_CCR] + /* Pass exc_ret to __mmap_switched */ + mov r0, r10 #endif /* CONFIG_CPU_CP15 elif CONFIG_CPU_V7M */ ret lr ENDPROC(__after_proc_init) @@ -175,19 +212,33 @@ ENDPROC(__after_proc_init) #ifdef CONFIG_ARM_MPU +#ifndef CONFIG_CPU_V7M /* Set which MPU region should be programmed */ -.macro set_region_nr tmp, rgnr +.macro set_region_nr tmp, rgnr, unused mov \tmp, \rgnr @ Use static region numbers mcr p15, 0, \tmp, c6, c2, 0 @ Write RGNR .endm /* Setup a single MPU region, either D or I side (D-side for unified) */ -.macro setup_region bar, acr, sr, side = MPU_DATA_SIDE +.macro setup_region bar, acr, sr, side = PMSAv7_DATA_SIDE, unused mcr p15, 0, \bar, c6, c1, (0 + \side) @ I/DRBAR mcr p15, 0, \acr, c6, c1, (4 + \side) @ I/DRACR mcr p15, 0, \sr, c6, c1, (2 + \side) @ I/DRSR .endm +#else +.macro set_region_nr tmp, rgnr, base + mov \tmp, \rgnr + str \tmp, [\base, #PMSAv7_RNR] +.endm +.macro setup_region bar, acr, sr, unused, base + lsl \acr, \acr, #16 + orr \acr, \acr, \sr + str \bar, [\base, #PMSAv7_RBAR] + str \acr, [\base, #PMSAv7_RASR] +.endm + +#endif /* * Setup the MPU and initial MPU Regions. We create the following regions: * Region 0: Use this for probing the MPU details, so leave disabled. @@ -195,70 +246,291 @@ ENDPROC(__after_proc_init) * Region 2: Normal, Shared, cacheable for RAM. From PHYS_OFFSET, size from r6 * Region 3: Normal, shared, inaccessible from PL0 to protect the vectors page * - * r6: Value to be written to DRSR (and IRSR if required) for MPU_RAM_REGION + * r6: Value to be written to DRSR (and IRSR if required) for PMSAv7_RAM_REGION */ + __HEAD ENTRY(__setup_mpu) /* Probe for v7 PMSA compliance */ - mrc p15, 0, r0, c0, c1, 4 @ Read ID_MMFR0 +M_CLASS(movw r12, #:lower16:BASEADDR_V7M_SCB) +M_CLASS(movt r12, #:upper16:BASEADDR_V7M_SCB) + +AR_CLASS(mrc p15, 0, r0, c0, c1, 4) @ Read ID_MMFR0 +M_CLASS(ldr r0, [r12, 0x50]) and r0, r0, #(MMFR0_PMSA) @ PMSA field teq r0, #(MMFR0_PMSAv7) @ PMSA v7 - bne __error_p @ Fail: ARM_MPU on NOT v7 PMSA + beq __setup_pmsa_v7 + teq r0, #(MMFR0_PMSAv8) @ PMSA v8 + beq __setup_pmsa_v8 + + ret lr +ENDPROC(__setup_mpu) + +ENTRY(__setup_pmsa_v7) + /* Calculate the size of a region covering just the kernel */ + ldr r5, =PLAT_PHYS_OFFSET @ Region start: PHYS_OFFSET + ldr r6, =(_end) @ Cover whole kernel + sub r6, r6, r5 @ Minimum size of region to map + clz r6, r6 @ Region size must be 2^N... + rsb r6, r6, #31 @ ...so round up region size + lsl r6, r6, #PMSAv7_RSR_SZ @ Put size in right field + orr r6, r6, #(1 << PMSAv7_RSR_EN) @ Set region enabled bit /* Determine whether the D/I-side memory map is unified. We set the * flags here and continue to use them for the rest of this function */ - mrc p15, 0, r0, c0, c0, 4 @ MPUIR +AR_CLASS(mrc p15, 0, r0, c0, c0, 4) @ MPUIR +M_CLASS(ldr r0, [r12, #MPU_TYPE]) ands r5, r0, #MPUIR_DREGION_SZMASK @ 0 size d region => No MPU - beq __error_p @ Fail: ARM_MPU and no MPU + bxeq lr tst r0, #MPUIR_nU @ MPUIR_nU = 0 for unified /* Setup second region first to free up r6 */ - set_region_nr r0, #MPU_RAM_REGION + set_region_nr r0, #PMSAv7_RAM_REGION, r12 isb /* Full access from PL0, PL1, shared for CONFIG_SMP, cacheable */ ldr r0, =PLAT_PHYS_OFFSET @ RAM starts at PHYS_OFFSET - ldr r5,=(MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL) + ldr r5,=(PMSAv7_AP_PL1RW_PL0RW | PMSAv7_RGN_NORMAL) - setup_region r0, r5, r6, MPU_DATA_SIDE @ PHYS_OFFSET, shared, enabled - beq 1f @ Memory-map not unified - setup_region r0, r5, r6, MPU_INSTR_SIDE @ PHYS_OFFSET, shared, enabled + setup_region r0, r5, r6, PMSAv7_DATA_SIDE, r12 @ PHYS_OFFSET, shared, enabled + beq 1f @ Memory-map not unified + setup_region r0, r5, r6, PMSAv7_INSTR_SIDE, r12 @ PHYS_OFFSET, shared, enabled 1: isb /* First/background region */ - set_region_nr r0, #MPU_BG_REGION + set_region_nr r0, #PMSAv7_BG_REGION, r12 isb /* Execute Never, strongly ordered, inaccessible to PL0, rw PL1 */ mov r0, #0 @ BG region starts at 0x0 - ldr r5,=(MPU_ACR_XN | MPU_RGN_STRONGLY_ORDERED | MPU_AP_PL1RW_PL0NA) - mov r6, #MPU_RSR_ALL_MEM @ 4GB region, enabled + ldr r5,=(PMSAv7_ACR_XN | PMSAv7_RGN_STRONGLY_ORDERED | PMSAv7_AP_PL1RW_PL0NA) + mov r6, #PMSAv7_RSR_ALL_MEM @ 4GB region, enabled - setup_region r0, r5, r6, MPU_DATA_SIDE @ 0x0, BG region, enabled - beq 2f @ Memory-map not unified - setup_region r0, r5, r6, MPU_INSTR_SIDE @ 0x0, BG region, enabled + setup_region r0, r5, r6, PMSAv7_DATA_SIDE, r12 @ 0x0, BG region, enabled + beq 2f @ Memory-map not unified + setup_region r0, r5, r6, PMSAv7_INSTR_SIDE r12 @ 0x0, BG region, enabled 2: isb - /* Vectors region */ - set_region_nr r0, #MPU_VECTORS_REGION +#ifdef CONFIG_XIP_KERNEL + set_region_nr r0, #PMSAv7_ROM_REGION, r12 isb - /* Shared, inaccessible to PL0, rw PL1 */ - mov r0, #CONFIG_VECTORS_BASE @ Cover from VECTORS_BASE - ldr r5,=(MPU_AP_PL1RW_PL0NA | MPU_RGN_NORMAL) - /* Writing N to bits 5:1 (RSR_SZ) --> region size 2^N+1 */ - mov r6, #(((2 * PAGE_SHIFT - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN) - - setup_region r0, r5, r6, MPU_DATA_SIDE @ VECTORS_BASE, PL0 NA, enabled - beq 3f @ Memory-map not unified - setup_region r0, r5, r6, MPU_INSTR_SIDE @ VECTORS_BASE, PL0 NA, enabled + + ldr r5,=(PMSAv7_AP_PL1RO_PL0NA | PMSAv7_RGN_NORMAL) + + ldr r0, =CONFIG_XIP_PHYS_ADDR @ ROM start + ldr r6, =(_exiprom) @ ROM end + sub r6, r6, r0 @ Minimum size of region to map + clz r6, r6 @ Region size must be 2^N... + rsb r6, r6, #31 @ ...so round up region size + lsl r6, r6, #PMSAv7_RSR_SZ @ Put size in right field + orr r6, r6, #(1 << PMSAv7_RSR_EN) @ Set region enabled bit + + setup_region r0, r5, r6, PMSAv7_DATA_SIDE, r12 @ XIP_PHYS_ADDR, shared, enabled + beq 3f @ Memory-map not unified + setup_region r0, r5, r6, PMSAv7_INSTR_SIDE, r12 @ XIP_PHYS_ADDR, shared, enabled 3: isb +#endif + ret lr +ENDPROC(__setup_pmsa_v7) - /* Enable the MPU */ - mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR - bic r0, r0, #CR_BR @ Disable the 'default mem-map' - orr r0, r0, #CR_M @ Set SCTRL.M (MPU on) - mcr p15, 0, r0, c1, c0, 0 @ Enable MPU +ENTRY(__setup_pmsa_v8) + mov r0, #0 +AR_CLASS(mcr p15, 0, r0, c6, c2, 1) @ PRSEL +M_CLASS(str r0, [r12, #PMSAv8_RNR]) isb + +#ifdef CONFIG_XIP_KERNEL + ldr r5, =CONFIG_XIP_PHYS_ADDR @ ROM start + ldr r6, =(_exiprom) @ ROM end + sub r6, r6, #1 + bic r6, r6, #(PMSAv8_MINALIGN - 1) + + orr r5, r5, #(PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED) + orr r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_NORMAL) | PMSAv8_LAR_EN) + +AR_CLASS(mcr p15, 0, r5, c6, c8, 0) @ PRBAR0 +AR_CLASS(mcr p15, 0, r6, c6, c8, 1) @ PRLAR0 +M_CLASS(str r5, [r12, #PMSAv8_RBAR_A(0)]) +M_CLASS(str r6, [r12, #PMSAv8_RLAR_A(0)]) +#endif + + ldr r5, =KERNEL_START + ldr r6, =KERNEL_END + sub r6, r6, #1 + bic r6, r6, #(PMSAv8_MINALIGN - 1) + + orr r5, r5, #(PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED) + orr r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_NORMAL) | PMSAv8_LAR_EN) + +AR_CLASS(mcr p15, 0, r5, c6, c8, 4) @ PRBAR1 +AR_CLASS(mcr p15, 0, r6, c6, c8, 5) @ PRLAR1 +M_CLASS(str r5, [r12, #PMSAv8_RBAR_A(1)]) +M_CLASS(str r6, [r12, #PMSAv8_RLAR_A(1)]) + + /* Setup Background: 0x0 - min(KERNEL_START, XIP_PHYS_ADDR) */ +#ifdef CONFIG_XIP_KERNEL + ldr r6, =KERNEL_START + ldr r5, =CONFIG_XIP_PHYS_ADDR + cmp r6, r5 + movcs r6, r5 +#else + ldr r6, =KERNEL_START +#endif + cmp r6, #0 + beq 1f + + mov r5, #0 + sub r6, r6, #1 + bic r6, r6, #(PMSAv8_MINALIGN - 1) + + orr r5, r5, #(PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED | PMSAv8_BAR_XN) + orr r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_DEVICE_nGnRnE) | PMSAv8_LAR_EN) + +AR_CLASS(mcr p15, 0, r5, c6, c9, 0) @ PRBAR2 +AR_CLASS(mcr p15, 0, r6, c6, c9, 1) @ PRLAR2 +M_CLASS(str r5, [r12, #PMSAv8_RBAR_A(2)]) +M_CLASS(str r6, [r12, #PMSAv8_RLAR_A(2)]) + +1: + /* Setup Background: max(KERNEL_END, _exiprom) - 0xffffffff */ +#ifdef CONFIG_XIP_KERNEL + ldr r5, =KERNEL_END + ldr r6, =(_exiprom) + cmp r5, r6 + movcc r5, r6 +#else + ldr r5, =KERNEL_END +#endif + mov r6, #0xffffffff + bic r6, r6, #(PMSAv8_MINALIGN - 1) + + orr r5, r5, #(PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED | PMSAv8_BAR_XN) + orr r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_DEVICE_nGnRnE) | PMSAv8_LAR_EN) + +AR_CLASS(mcr p15, 0, r5, c6, c9, 4) @ PRBAR3 +AR_CLASS(mcr p15, 0, r6, c6, c9, 5) @ PRLAR3 +M_CLASS(str r5, [r12, #PMSAv8_RBAR_A(3)]) +M_CLASS(str r6, [r12, #PMSAv8_RLAR_A(3)]) + +#ifdef CONFIG_XIP_KERNEL + /* Setup Background: min(_exiprom, KERNEL_END) - max(KERNEL_START, XIP_PHYS_ADDR) */ + ldr r5, =(_exiprom) + ldr r6, =KERNEL_END + cmp r5, r6 + movcs r5, r6 + + ldr r6, =KERNEL_START + ldr r0, =CONFIG_XIP_PHYS_ADDR + cmp r6, r0 + movcc r6, r0 + + sub r6, r6, #1 + bic r6, r6, #(PMSAv8_MINALIGN - 1) + + orr r5, r5, #(PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED | PMSAv8_BAR_XN) + orr r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_DEVICE_nGnRnE) | PMSAv8_LAR_EN) + +#ifdef CONFIG_CPU_V7M + /* There is no alias for n == 4 */ + mov r0, #4 + str r0, [r12, #PMSAv8_RNR] @ PRSEL + isb + + str r5, [r12, #PMSAv8_RBAR_A(0)] + str r6, [r12, #PMSAv8_RLAR_A(0)] +#else + mcr p15, 0, r5, c6, c10, 0 @ PRBAR4 + mcr p15, 0, r6, c6, c10, 1 @ PRLAR4 +#endif +#endif ret lr -ENDPROC(__setup_mpu) +ENDPROC(__setup_pmsa_v8) + +#ifdef CONFIG_SMP +/* + * r6: pointer at mpu_rgn_info + */ + + .text +ENTRY(__secondary_setup_mpu) + /* Use MPU region info supplied by __cpu_up */ + ldr r6, [r7] @ get secondary_data.mpu_rgn_info + + /* Probe for v7 PMSA compliance */ + mrc p15, 0, r0, c0, c1, 4 @ Read ID_MMFR0 + and r0, r0, #(MMFR0_PMSA) @ PMSA field + teq r0, #(MMFR0_PMSAv7) @ PMSA v7 + beq __secondary_setup_pmsa_v7 + teq r0, #(MMFR0_PMSAv8) @ PMSA v8 + beq __secondary_setup_pmsa_v8 + b __error_p +ENDPROC(__secondary_setup_mpu) + +/* + * r6: pointer at mpu_rgn_info + */ +ENTRY(__secondary_setup_pmsa_v7) + /* Determine whether the D/I-side memory map is unified. We set the + * flags here and continue to use them for the rest of this function */ + mrc p15, 0, r0, c0, c0, 4 @ MPUIR + ands r5, r0, #MPUIR_DREGION_SZMASK @ 0 size d region => No MPU + beq __error_p + + ldr r4, [r6, #MPU_RNG_INFO_USED] + mov r5, #MPU_RNG_SIZE + add r3, r6, #MPU_RNG_INFO_RNGS + mla r3, r4, r5, r3 + +1: + tst r0, #MPUIR_nU @ MPUIR_nU = 0 for unified + sub r3, r3, #MPU_RNG_SIZE + sub r4, r4, #1 + + set_region_nr r0, r4 + isb + + ldr r0, [r3, #MPU_RGN_DRBAR] + ldr r6, [r3, #MPU_RGN_DRSR] + ldr r5, [r3, #MPU_RGN_DRACR] + + setup_region r0, r5, r6, PMSAv7_DATA_SIDE + beq 2f + setup_region r0, r5, r6, PMSAv7_INSTR_SIDE +2: isb + + mrc p15, 0, r0, c0, c0, 4 @ Reevaluate the MPUIR + cmp r4, #0 + bgt 1b + + ret lr +ENDPROC(__secondary_setup_pmsa_v7) + +ENTRY(__secondary_setup_pmsa_v8) + ldr r4, [r6, #MPU_RNG_INFO_USED] +#ifndef CONFIG_XIP_KERNEL + add r4, r4, #1 #endif + mov r5, #MPU_RNG_SIZE + add r3, r6, #MPU_RNG_INFO_RNGS + mla r3, r4, r5, r3 + +1: + sub r3, r3, #MPU_RNG_SIZE + sub r4, r4, #1 + + mcr p15, 0, r4, c6, c2, 1 @ PRSEL + isb + + ldr r5, [r3, #MPU_RGN_PRBAR] + ldr r6, [r3, #MPU_RGN_PRLAR] + + mcr p15, 0, r5, c6, c3, 0 @ PRBAR + mcr p15, 0, r6, c6, c3, 1 @ PRLAR + + cmp r4, #0 + bgt 1b + + ret lr +ENDPROC(__secondary_setup_pmsa_v8) +#endif /* CONFIG_SMP */ +#endif /* CONFIG_ARM_MPU */ #include "head-common.S" |