diff options
Diffstat (limited to 'arch/arm/mach-davinci/Kconfig')
| -rw-r--r-- | arch/arm/mach-davinci/Kconfig | 265 |
1 files changed, 16 insertions, 249 deletions
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index e026b19b23ea..6cd6d29a2c9d 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -1,250 +1,31 @@ -if ARCH_DAVINCI - -config AINTC - bool - -config CP_INTC - bool - select IRQ_DOMAIN +# SPDX-License-Identifier: GPL-2.0 -config ARCH_DAVINCI_DMx - bool +menuconfig ARCH_DAVINCI + bool "TI DaVinci" + depends on ARCH_MULTI_V5 + depends on CPU_LITTLE_ENDIAN + select ARCH_DAVINCI_DA850 select CPU_ARM926T + select DAVINCI_TIMER + select ZONE_DMA + select PM_GENERIC_DOMAINS if PM + select PM_GENERIC_DOMAINS_OF if PM && OF + select REGMAP_MMIO + select RESET_CONTROLLER + select PINCTRL + select PINCTRL_SINGLE -menu "TI DaVinci Implementations" +if ARCH_DAVINCI comment "DaVinci Core Type" -config ARCH_DAVINCI_DM644x - bool "DaVinci 644x based system" - select AINTC - select ARCH_DAVINCI_DMx - -config ARCH_DAVINCI_DM355 - bool "DaVinci 355 based system" - select AINTC - select ARCH_DAVINCI_DMx - -config ARCH_DAVINCI_DM646x - bool "DaVinci 646x based system" - select AINTC - select ARCH_DAVINCI_DMx - -config ARCH_DAVINCI_DA830 - bool "DA830/OMAP-L137/AM17x based system" - select ARCH_DAVINCI_DA8XX - select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1 - select CP_INTC - config ARCH_DAVINCI_DA850 bool "DA850/OMAP-L138/AM18x based system" select ARCH_DAVINCI_DA8XX - select ARCH_HAS_CPUFREQ - select CPU_FREQ_TABLE - select CP_INTC + select DAVINCI_CP_INTC config ARCH_DAVINCI_DA8XX bool - select CPU_ARM926T - -config ARCH_DAVINCI_DM365 - bool "DaVinci 365 based system" - select AINTC - select ARCH_DAVINCI_DMx - -config ARCH_DAVINCI_TNETV107X - bool "TNETV107X based system" - select CPU_V6 - select CP_INTC - -comment "DaVinci Board Type" - -config MACH_DA8XX_DT - bool "Support DA8XX platforms using device tree" - default y - depends on ARCH_DAVINCI_DA8XX - select PINCTRL - help - Say y here to include support for TI DaVinci DA850 based using - Flattened Device Tree. More information at Documentation/devicetree - -config MACH_DAVINCI_EVM - bool "TI DM644x EVM" - default ARCH_DAVINCI_DM644x - depends on ARCH_DAVINCI_DM644x - select EEPROM_AT24 - select I2C - help - Configure this option to specify the whether the board used - for development is a DM644x EVM - -config MACH_SFFSDR - bool "Lyrtech SFFSDR" - depends on ARCH_DAVINCI_DM644x - select EEPROM_AT24 - select I2C - help - Say Y here to select the Lyrtech Small Form Factor - Software Defined Radio (SFFSDR) board. - -config MACH_NEUROS_OSD2 - bool "Neuros OSD2 Open Television Set Top Box" - depends on ARCH_DAVINCI_DM644x - help - Configure this option to specify the whether the board used - for development is a Neuros OSD2 Open Set Top Box. - -config MACH_DAVINCI_DM355_EVM - bool "TI DM355 EVM" - default ARCH_DAVINCI_DM355 - depends on ARCH_DAVINCI_DM355 - help - Configure this option to specify the whether the board used - for development is a DM355 EVM - -config MACH_DM355_LEOPARD - bool "DM355 Leopard board" - depends on ARCH_DAVINCI_DM355 - help - Configure this option to specify the whether the board used - for development is a DM355 Leopard board. - -config MACH_DAVINCI_DM6467_EVM - bool "TI DM6467 EVM" - default ARCH_DAVINCI_DM646x - depends on ARCH_DAVINCI_DM646x - select EEPROM_AT24 - select I2C - select MACH_DAVINCI_DM6467TEVM - help - Configure this option to specify the whether the board used - for development is a DM6467 EVM - -config MACH_DAVINCI_DM6467TEVM - bool - -config MACH_DAVINCI_DM365_EVM - bool "TI DM365 EVM" - default ARCH_DAVINCI_DM365 - depends on ARCH_DAVINCI_DM365 - select EEPROM_AT24 - select I2C - help - Configure this option to specify whether the board used - for development is a DM365 EVM - -config MACH_DAVINCI_DA830_EVM - bool "TI DA830/OMAP-L137/AM17x Reference Platform" - default ARCH_DAVINCI_DA830 - depends on ARCH_DAVINCI_DA830 - select EEPROM_AT24 - select GPIO_PCF857X - select I2C - help - Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. - -choice - prompt "Select DA830/OMAP-L137/AM17x UI board peripheral" - depends on MACH_DAVINCI_DA830_EVM - help - The presence of UI card on the DA830/OMAP-L137/AM17x EVM is - detected automatically based on successful probe of the I2C - based GPIO expander on that board. This option selected in this - menu has an effect only in case of a successful UI card detection. - -config DA830_UI_LCD - bool "LCD" - help - Say Y here to use the LCD as a framebuffer or simple character - display. - -config DA830_UI_NAND - bool "NAND flash" - help - Say Y here to use the NAND flash. Do not forget to setup - the switch correctly. -endchoice - -config MACH_DAVINCI_DA850_EVM - bool "TI DA850/OMAP-L138/AM18x Reference Platform" - default ARCH_DAVINCI_DA850 - depends on ARCH_DAVINCI_DA850 - help - Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module. - -choice - prompt "Select peripherals connected to expander on UI board" - depends on MACH_DAVINCI_DA850_EVM - help - The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x - EVM is detected automatically based on successful probe of the I2C - based GPIO expander on that card. This option selected in this - menu has an effect only in case of a successful UI card detection. - -config DA850_UI_NONE - bool "No peripheral is enabled" - help - Say Y if you do not want to enable any of the peripherals connected - to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card - -config DA850_UI_RMII - bool "RMII Ethernet PHY" - help - Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x - EVM. This PHY is found on the UI daughter card that is supplied with - the EVM. - NOTE: Please take care while choosing this option, MII PHY will - not be functional if RMII mode is selected. - -config DA850_UI_SD_VIDEO_PORT - bool "Video Port Interface" - help - Say Y if you want to use Video Port Interface (VPIF) on the - DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the - UI daughter card that is supplied with the EVM. - -endchoice - -config DA850_WL12XX - bool "AM18x wl1271 daughter board" - depends on MACH_DAVINCI_DA850_EVM - help - The wl1271 daughter card for AM18x EVMs is a combo wireless - connectivity add-on card, based on the LS Research TiWi module with - Texas Instruments' wl1271 solution. - Say Y if you want to use a wl1271 expansion card connected to the - AM18x EVM. - -config GPIO_PCA953X - default MACH_DAVINCI_DA850_EVM - -config KEYBOARD_GPIO_POLLED - default MACH_DAVINCI_DA850_EVM - -config MACH_TNETV107X - bool "TI TNETV107X Reference Platform" - default ARCH_DAVINCI_TNETV107X - depends on ARCH_DAVINCI_TNETV107X - help - Say Y here to select the TI TNETV107X Evaluation Module. - -config MACH_MITYOMAPL138 - bool "Critical Link MityDSP-L138/MityARM-1808 SoM" - depends on ARCH_DAVINCI_DA850 - select EEPROM_AT24 - select I2C - help - Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 - System on Module. Information on this SoM may be found at - http://www.mitydsp.com - -config MACH_OMAPL138_HAWKBOARD - bool "TI AM1808 / OMAPL-138 Hawkboard platform" - depends on ARCH_DAVINCI_DA850 - help - Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform . - Information of this board may be found at - http://www.hawkboard.org/ config DAVINCI_MUX bool "DAVINCI multiplexing support" @@ -271,18 +52,4 @@ config DAVINCI_MUX_WARNINGS to change the pin multiplexing setup. When there are no warnings printed, it's safe to deselect DAVINCI_MUX for your product. -config DAVINCI_RESET_CLOCKS - bool "Reset unused clocks during boot" - depends on ARCH_DAVINCI - help - Say Y if you want to reset unused clocks during boot. - This option saves power, but assumes all drivers are - using the clock framework. Broken drivers that do not - yet use clock framework may not work with this option. - If you are booting from another operating system, you - probably do not want this option enabled until your - device drivers work properly. - -endmenu - endif |