summaryrefslogtreecommitdiff
path: root/arch/arm/mach-davinci/board-omapl138-hawk.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-davinci/board-omapl138-hawk.c')
-rw-r--r--arch/arm/mach-davinci/board-omapl138-hawk.c346
1 files changed, 0 insertions, 346 deletions
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
deleted file mode 100644
index b8c20de10ca2..000000000000
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- * Hawkboard.org based on TI's OMAP-L138 Platform
- *
- * Initial code: Syed Mohammed Khasim
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of
- * any kind, whether express or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/cp_intc.h>
-#include <mach/da8xx.h>
-#include <mach/mux.h>
-
-#define HAWKBOARD_PHY_ID "davinci_mdio-0:07"
-#define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12)
-#define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13)
-
-#define DA850_USB1_VBUS_PIN GPIO_TO_PIN(2, 4)
-#define DA850_USB1_OC_PIN GPIO_TO_PIN(6, 13)
-
-static short omapl138_hawk_mii_pins[] __initdata = {
- DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
- DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
- DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
- DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
- DA850_MDIO_D,
- -1
-};
-
-static __init void omapl138_hawk_config_emac(void)
-{
- void __iomem *cfgchip3 = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
- int ret;
- u32 val;
- struct davinci_soc_info *soc_info = &davinci_soc_info;
-
- val = __raw_readl(cfgchip3);
- val &= ~BIT(8);
- ret = davinci_cfg_reg_list(omapl138_hawk_mii_pins);
- if (ret) {
- pr_warn("%s: CPGMAC/MII mux setup failed: %d\n", __func__, ret);
- return;
- }
-
- /* configure the CFGCHIP3 register for MII */
- __raw_writel(val, cfgchip3);
- pr_info("EMAC: MII PHY configured\n");
-
- soc_info->emac_pdata->phy_id = HAWKBOARD_PHY_ID;
-
- ret = da8xx_register_emac();
- if (ret)
- pr_warn("%s: EMAC registration failed: %d\n", __func__, ret);
-}
-
-/*
- * The following EDMA channels/slots are not being used by drivers (for
- * example: Timer, GPIO, UART events etc) on da850/omap-l138 EVM/Hawkboard,
- * hence they are being reserved for codecs on the DSP side.
- */
-static const s16 da850_dma0_rsv_chans[][2] = {
- /* (offset, number) */
- { 8, 6},
- {24, 4},
- {30, 2},
- {-1, -1}
-};
-
-static const s16 da850_dma0_rsv_slots[][2] = {
- /* (offset, number) */
- { 8, 6},
- {24, 4},
- {30, 50},
- {-1, -1}
-};
-
-static const s16 da850_dma1_rsv_chans[][2] = {
- /* (offset, number) */
- { 0, 28},
- {30, 2},
- {-1, -1}
-};
-
-static const s16 da850_dma1_rsv_slots[][2] = {
- /* (offset, number) */
- { 0, 28},
- {30, 90},
- {-1, -1}
-};
-
-static struct edma_rsv_info da850_edma_cc0_rsv = {
- .rsv_chans = da850_dma0_rsv_chans,
- .rsv_slots = da850_dma0_rsv_slots,
-};
-
-static struct edma_rsv_info da850_edma_cc1_rsv = {
- .rsv_chans = da850_dma1_rsv_chans,
- .rsv_slots = da850_dma1_rsv_slots,
-};
-
-static struct edma_rsv_info *da850_edma_rsv[2] = {
- &da850_edma_cc0_rsv,
- &da850_edma_cc1_rsv,
-};
-
-static const short hawk_mmcsd0_pins[] = {
- DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2,
- DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD,
- DA850_GPIO3_12, DA850_GPIO3_13,
- -1
-};
-
-static int da850_hawk_mmc_get_ro(int index)
-{
- return gpio_get_value(DA850_HAWK_MMCSD_WP_PIN);
-}
-
-static int da850_hawk_mmc_get_cd(int index)
-{
- return !gpio_get_value(DA850_HAWK_MMCSD_CD_PIN);
-}
-
-static struct davinci_mmc_config da850_mmc_config = {
- .get_ro = da850_hawk_mmc_get_ro,
- .get_cd = da850_hawk_mmc_get_cd,
- .wires = 4,
- .max_freq = 50000000,
- .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-static __init void omapl138_hawk_mmc_init(void)
-{
- int ret;
-
- ret = davinci_cfg_reg_list(hawk_mmcsd0_pins);
- if (ret) {
- pr_warn("%s: MMC/SD0 mux setup failed: %d\n", __func__, ret);
- return;
- }
-
- ret = gpio_request_one(DA850_HAWK_MMCSD_CD_PIN,
- GPIOF_DIR_IN, "MMC CD");
- if (ret < 0) {
- pr_warn("%s: can not open GPIO %d\n",
- __func__, DA850_HAWK_MMCSD_CD_PIN);
- return;
- }
-
- ret = gpio_request_one(DA850_HAWK_MMCSD_WP_PIN,
- GPIOF_DIR_IN, "MMC WP");
- if (ret < 0) {
- pr_warn("%s: can not open GPIO %d\n",
- __func__, DA850_HAWK_MMCSD_WP_PIN);
- goto mmc_setup_wp_fail;
- }
-
- ret = da8xx_register_mmcsd0(&da850_mmc_config);
- if (ret) {
- pr_warn("%s: MMC/SD0 registration failed: %d\n", __func__, ret);
- goto mmc_setup_mmcsd_fail;
- }
-
- return;
-
-mmc_setup_mmcsd_fail:
- gpio_free(DA850_HAWK_MMCSD_WP_PIN);
-mmc_setup_wp_fail:
- gpio_free(DA850_HAWK_MMCSD_CD_PIN);
-}
-
-static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id);
-static da8xx_ocic_handler_t hawk_usb_ocic_handler;
-
-static const short da850_hawk_usb11_pins[] = {
- DA850_GPIO2_4, DA850_GPIO6_13,
- -1
-};
-
-static int hawk_usb_set_power(unsigned port, int on)
-{
- gpio_set_value(DA850_USB1_VBUS_PIN, on);
- return 0;
-}
-
-static int hawk_usb_get_power(unsigned port)
-{
- return gpio_get_value(DA850_USB1_VBUS_PIN);
-}
-
-static int hawk_usb_get_oci(unsigned port)
-{
- return !gpio_get_value(DA850_USB1_OC_PIN);
-}
-
-static int hawk_usb_ocic_notify(da8xx_ocic_handler_t handler)
-{
- int irq = gpio_to_irq(DA850_USB1_OC_PIN);
- int error = 0;
-
- if (handler != NULL) {
- hawk_usb_ocic_handler = handler;
-
- error = request_irq(irq, omapl138_hawk_usb_ocic_irq,
- IRQF_DISABLED | IRQF_TRIGGER_RISING |
- IRQF_TRIGGER_FALLING,
- "OHCI over-current indicator", NULL);
- if (error)
- pr_err("%s: could not request IRQ to watch "
- "over-current indicator changes\n", __func__);
- } else {
- free_irq(irq, NULL);
- }
- return error;
-}
-
-static struct da8xx_ohci_root_hub omapl138_hawk_usb11_pdata = {
- .set_power = hawk_usb_set_power,
- .get_power = hawk_usb_get_power,
- .get_oci = hawk_usb_get_oci,
- .ocic_notify = hawk_usb_ocic_notify,
- /* TPS2087 switch @ 5V */
- .potpgt = (3 + 1) / 2, /* 3 ms max */
-};
-
-static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id)
-{
- hawk_usb_ocic_handler(&omapl138_hawk_usb11_pdata, 1);
- return IRQ_HANDLED;
-}
-
-static __init void omapl138_hawk_usb_init(void)
-{
- int ret;
- u32 cfgchip2;
-
- ret = davinci_cfg_reg_list(da850_hawk_usb11_pins);
- if (ret) {
- pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret);
- return;
- }
-
- /* Setup the Ref. clock frequency for the HAWK at 24 MHz. */
-
- cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
- cfgchip2 &= ~CFGCHIP2_REFFREQ;
- cfgchip2 |= CFGCHIP2_REFFREQ_24MHZ;
- __raw_writel(cfgchip2, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
-
- ret = gpio_request_one(DA850_USB1_VBUS_PIN,
- GPIOF_DIR_OUT, "USB1 VBUS");
- if (ret < 0) {
- pr_err("%s: failed to request GPIO for USB 1.1 port "
- "power control: %d\n", __func__, ret);
- return;
- }
-
- ret = gpio_request_one(DA850_USB1_OC_PIN,
- GPIOF_DIR_IN, "USB1 OC");
- if (ret < 0) {
- pr_err("%s: failed to request GPIO for USB 1.1 port "
- "over-current indicator: %d\n", __func__, ret);
- goto usb11_setup_oc_fail;
- }
-
- ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata);
- if (ret) {
- pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
- goto usb11_setup_fail;
- }
-
- return;
-
-usb11_setup_fail:
- gpio_free(DA850_USB1_OC_PIN);
-usb11_setup_oc_fail:
- gpio_free(DA850_USB1_VBUS_PIN);
-}
-
-static struct davinci_uart_config omapl138_hawk_uart_config __initdata = {
- .enabled_uarts = 0x7,
-};
-
-static __init void omapl138_hawk_init(void)
-{
- int ret;
-
- davinci_serial_init(&omapl138_hawk_uart_config);
-
- omapl138_hawk_config_emac();
-
- ret = da850_register_edma(da850_edma_rsv);
- if (ret)
- pr_warn("%s: EDMA registration failed: %d\n", __func__, ret);
-
- omapl138_hawk_mmc_init();
-
- omapl138_hawk_usb_init();
-
- ret = da8xx_register_watchdog();
- if (ret)
- pr_warn("%s: watchdog registration failed: %d\n",
- __func__, ret);
-
- ret = da8xx_register_rproc();
- if (ret)
- pr_warn("%s: dsp/rproc registration failed: %d\n",
- __func__, ret);
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init omapl138_hawk_console_init(void)
-{
- if (!machine_is_omapl138_hawkboard())
- return 0;
-
- return add_preferred_console("ttyS", 2, "115200");
-}
-console_initcall(omapl138_hawk_console_init);
-#endif
-
-static void __init omapl138_hawk_map_io(void)
-{
- da850_init();
-}
-
-MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
- .atag_offset = 0x100,
- .map_io = omapl138_hawk_map_io,
- .init_irq = cp_intc_init,
- .init_time = davinci_timer_init,
- .init_machine = omapl138_hawk_init,
- .init_late = davinci_init_late,
- .dma_zone_size = SZ_128M,
- .restart = da8xx_restart,
- .reserve = da8xx_rproc_reserve_cma,
-MACHINE_END
generated by cgit (git 2.34.1) at 2025-12-26 17:29:37 +0000