diff options
Diffstat (limited to 'arch/arm/mach-omap1/board-ams-delta.c')
| -rw-r--r-- | arch/arm/mach-omap1/board-ams-delta.c | 140 |
1 files changed, 53 insertions, 87 deletions
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 9108c871d129..16392720296c 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -11,7 +11,6 @@ #include <linux/gpio/driver.h> #include <linux/gpio/machine.h> #include <linux/gpio/consumer.h> -#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/input.h> @@ -20,6 +19,7 @@ #include <linux/mtd/nand-gpio.h> #include <linux/mtd/partitions.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/regulator/consumer.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> @@ -176,20 +176,18 @@ static struct resource latch1_resources[] = { #define LATCH1_LABEL "latch1" -static struct bgpio_pdata latch1_pdata = { - .label = LATCH1_LABEL, - .base = -1, - .ngpio = LATCH1_NGPIO, +static const struct property_entry latch1_gpio_props[] = { + PROPERTY_ENTRY_STRING("label", LATCH1_LABEL), + PROPERTY_ENTRY_U32("ngpios", LATCH1_NGPIO), + { } }; -static struct platform_device latch1_gpio_device = { +static const struct platform_device_info latch1_gpio_devinfo = { .name = "basic-mmio-gpio", .id = 0, - .resource = latch1_resources, - .num_resources = ARRAY_SIZE(latch1_resources), - .dev = { - .platform_data = &latch1_pdata, - }, + .res = latch1_resources, + .num_res = ARRAY_SIZE(latch1_resources), + .properties = latch1_gpio_props, }; #define LATCH1_PIN_LED_CAMERA 0 @@ -214,20 +212,18 @@ static struct resource latch2_resources[] = { #define LATCH2_LABEL "latch2" -static struct bgpio_pdata latch2_pdata = { - .label = LATCH2_LABEL, - .base = -1, - .ngpio = LATCH2_NGPIO, +static const struct property_entry latch2_gpio_props[] = { + PROPERTY_ENTRY_STRING("label", LATCH2_LABEL), + PROPERTY_ENTRY_U32("ngpios", LATCH2_NGPIO), + { } }; -static struct platform_device latch2_gpio_device = { +static struct platform_device_info latch2_gpio_devinfo = { .name = "basic-mmio-gpio", .id = 1, - .resource = latch2_resources, - .num_resources = ARRAY_SIZE(latch2_resources), - .dev = { - .platform_data = &latch2_pdata, - }, + .res = latch2_resources, + .num_res = ARRAY_SIZE(latch2_resources), + .properties = latch2_gpio_props, }; #define LATCH2_PIN_LCD_VBLEN 0 @@ -543,14 +539,13 @@ static struct gpiod_lookup_table keybrd_pwr_gpio_table = { }; static struct platform_device *ams_delta_devices[] __initdata = { - &latch1_gpio_device, - &latch2_gpio_device, &ams_delta_kp_device, &ams_delta_audio_device, &ams_delta_serio_device, &ams_delta_nand_device, &ams_delta_lcd_device, &cx20442_codec_device, + &modem_nreset_device, }; static struct gpiod_lookup_table *ams_delta_gpio_tables[] __initdata = { @@ -561,22 +556,6 @@ static struct gpiod_lookup_table *ams_delta_gpio_tables[] __initdata = { &ams_delta_nand_gpio_table, }; -/* - * Some drivers may not use GPIO lookup tables but need to be provided - * with GPIO numbers. The same applies to GPIO based IRQ lines - some - * drivers may even not use GPIO layer but expect just IRQ numbers. - * We could either define GPIO lookup tables then use them on behalf - * of those devices, or we can use GPIO driver level methods for - * identification of GPIO and IRQ numbers. For the purpose of the latter, - * defina a helper function which identifies GPIO chips by their labels. - */ -static int gpiochip_match_by_label(struct gpio_chip *chip, void *data) -{ - char *label = data; - - return !strcmp(label, chip->label); -} - static struct gpiod_hog ams_delta_gpio_hogs[] = { GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_KEYBRD_DATAOUT, "keybrd_dataout", GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW), @@ -616,14 +595,28 @@ static void __init modem_assign_irq(struct gpio_chip *chip) */ static void __init omap_gpio_deps_init(void) { + struct gpio_device *gdev; struct gpio_chip *chip; - chip = gpiochip_find(OMAP_GPIO_LABEL, gpiochip_match_by_label); - if (!chip) { - pr_err("%s: OMAP GPIO chip not found\n", __func__); + /* + * Some drivers may not use GPIO lookup tables but need to be provided + * with GPIO numbers. The same applies to GPIO based IRQ lines - some + * drivers may even not use GPIO layer but expect just IRQ numbers. + * We could either define GPIO lookup tables then use them on behalf + * of those devices, or we can use GPIO driver level methods for + * identification of GPIO and IRQ numbers. + * + * This reference will be leaked but that's alright as this device + * never goes down. + */ + gdev = gpio_device_find_by_label(OMAP_GPIO_LABEL); + if (!gdev) { + pr_err("%s: OMAP GPIO device not found\n", __func__); return; } + chip = gpio_device_get_chip(gdev); + /* * Start with FIQ initialization as it may have to request * and release successfully each OMAP GPIO pin in turn. @@ -699,6 +692,9 @@ static void __init ams_delta_init(void) omap1_usb_init(&ams_delta_usb_config); platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); + platform_device_register_full(&latch1_gpio_devinfo); + platform_device_register_full(&latch2_gpio_devinfo); + /* * As soon as regulator consumers have been registered, assign their * dev_names to consumer supply entries of respective regulators. @@ -783,26 +779,28 @@ static struct plat_serial8250_port ams_delta_modem_ports[] = { { }, }; +static int ams_delta_modem_pm_activate(struct device *dev) +{ + modem_priv.regulator = regulator_get(dev, "RESET#"); + if (IS_ERR(modem_priv.regulator)) + return -EPROBE_DEFER; + + return 0; +} + +static struct dev_pm_domain ams_delta_modem_pm_domain = { + .activate = ams_delta_modem_pm_activate, +}; + static struct platform_device ams_delta_modem_device = { .name = "serial8250", .id = PLAT8250_DEV_PLATFORM1, .dev = { .platform_data = ams_delta_modem_ports, + .pm_domain = &ams_delta_modem_pm_domain, }, }; -static int __init modem_nreset_init(void) -{ - int err; - - err = platform_device_register(&modem_nreset_device); - if (err) - pr_err("Couldn't register the modem regulator device\n"); - - return err; -} - - /* * This function expects MODEM IRQ number already assigned to the port. * The MODEM device requires its RESET# pin kept high during probe. @@ -834,37 +832,6 @@ static int __init ams_delta_modem_init(void) } arch_initcall_sync(ams_delta_modem_init); -static int __init late_init(void) -{ - int err; - - err = modem_nreset_init(); - if (err) - return err; - - /* - * Once the modem device is registered, the modem_nreset - * regulator can be requested on behalf of that device. - */ - modem_priv.regulator = regulator_get(&ams_delta_modem_device.dev, - "RESET#"); - if (IS_ERR(modem_priv.regulator)) { - err = PTR_ERR(modem_priv.regulator); - goto unregister; - } - return 0; - -unregister: - platform_device_unregister(&ams_delta_modem_device); - return err; -} - -static void __init ams_delta_init_late(void) -{ - omap1_init_late(); - late_init(); -} - static void __init ams_delta_map_io(void) { omap1_map_io(); @@ -877,9 +844,8 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") .map_io = ams_delta_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, .init_machine = ams_delta_init, - .init_late = ams_delta_init_late, + .init_late = omap1_init_late, .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END |