diff options
Diffstat (limited to 'arch/arm/mach-omap1/board-sx1.c')
| -rw-r--r-- | arch/arm/mach-omap1/board-sx1.c | 60 |
1 files changed, 40 insertions, 20 deletions
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index ec27bb3e370f..b869c7ba1a1b 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/board-sx1.c * @@ -9,12 +10,9 @@ * * Maintainters : Vladimir Ananiev (aka Vovan888), Sergge * oslik.ru -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. */ -#include <linux/gpio.h> +#include <linux/gpio/machine.h> +#include <linux/gpio/consumer.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/input.h> @@ -29,20 +27,18 @@ #include <linux/export.h> #include <linux/omapfb.h> #include <linux/platform_data/keypad-omap.h> +#include <linux/omap-dma.h> +#include "tc.h" #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include "flash.h" -#include <mach/mux.h> -#include <linux/omap-dma.h> -#include <mach/tc.h> +#include "mux.h" #include "board-sx1.h" - -#include <mach/hardware.h> -#include <mach/usb.h> - +#include "hardware.h" +#include "usb.h" #include "common.h" /* Write to I2C device */ @@ -309,8 +305,23 @@ static struct platform_device *sx1_devices[] __initdata = { /*-----------------------------------------*/ +static struct gpiod_lookup_table sx1_gpio_table = { + .dev_id = NULL, + .table = { + GPIO_LOOKUP("gpio-0-15", 1, "irda_off", + GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-0-15", 11, "switch", + GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-0-15", 15, "usb_on", + GPIO_ACTIVE_HIGH), + { } + }, +}; + static void __init omap_sx1_init(void) { + struct gpio_desc *d; + /* mux pins for uarts */ omap_cfg_reg(UART1_TX); omap_cfg_reg(UART1_RTS); @@ -325,25 +336,34 @@ static void __init omap_sx1_init(void) omap_register_i2c_bus(1, 100, NULL, 0); omap1_usb_init(&sx1_usb_config); sx1_mmc_init(); + gpiod_add_lookup_table(&sx1_gpio_table); /* turn on USB power */ /* sx1_setusbpower(1); can't do it here because i2c is not ready */ - gpio_request(1, "A_IRDA_OFF"); - gpio_request(11, "A_SWITCH"); - gpio_request(15, "A_USB_ON"); - gpio_direction_output(1, 1); /*A_IRDA_OFF = 1 */ - gpio_direction_output(11, 0); /*A_SWITCH = 0 */ - gpio_direction_output(15, 0); /*A_USB_ON = 0 */ + d = gpiod_get(NULL, "irda_off", GPIOD_OUT_HIGH); + if (IS_ERR(d)) + pr_err("Unable to get IRDA OFF GPIO descriptor\n"); + else + gpiod_put(d); + d = gpiod_get(NULL, "switch", GPIOD_OUT_LOW); + if (IS_ERR(d)) + pr_err("Unable to get SWITCH GPIO descriptor\n"); + else + gpiod_put(d); + d = gpiod_get(NULL, "usb_on", GPIOD_OUT_LOW); + if (IS_ERR(d)) + pr_err("Unable to get USB ON GPIO descriptor\n"); + else + gpiod_put(d); omapfb_set_lcd_config(&sx1_lcd_config); } MACHINE_START(SX1, "OMAP310 based Siemens SX1") .atag_offset = 0x100, - .map_io = omap15xx_map_io, + .map_io = omap1_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, .init_machine = omap_sx1_init, .init_late = omap1_init_late, .init_time = omap1_timer_init, |