1 files changed, 0 insertions, 202 deletions
diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
deleted file mode 100644
index d28b0f726715..000000000000
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * OMAP4-specific DPLL control functions
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- * Rajendra Nayak
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/bitops.h>
-
-#include "soc.h"
-#include "clock.h"
-#include "clock44xx.h"
-#include "cm-regbits-44xx.h"
-
-/*
- * Maximum DPLL input frequency (FINT) and output frequency (FOUT) that
- * can supported when using the DPLL low-power mode. Frequencies are
- * defined in OMAP4430/60 Public TRM section 3.6.3.3.2 "Enable Control,
- * Status, and Low-Power Operation Mode".
- */
-#define OMAP4_DPLL_LP_FINT_MAX	1000000
-#define OMAP4_DPLL_LP_FOUT_MAX	100000000
-
-/* Supported only on OMAP4 */
-int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk)
-{
-	u32 v;
-	u32 mask;
-
-	if (!clk || !clk->clksel_reg || !cpu_is_omap44xx())
-		return -EINVAL;
-
-	mask = clk->flags & CLOCK_CLKOUTX2 ?
-			OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
-			OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
-
-	v = __raw_readl(clk->clksel_reg);
-	v &= mask;
-	v >>= __ffs(mask);
-
-	return v;
-}
-
-void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk)
-{
-	u32 v;
-	u32 mask;
-
-	if (!clk || !clk->clksel_reg || !cpu_is_omap44xx())
-		return;
-
-	mask = clk->flags & CLOCK_CLKOUTX2 ?
-			OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
-			OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
-
-	v = __raw_readl(clk->clksel_reg);
-	/* Clear the bit to allow gatectrl */
-	v &= ~mask;
-	__raw_writel(v, clk->clksel_reg);
-}
-
-void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk)
-{
-	u32 v;
-	u32 mask;
-
-	if (!clk || !clk->clksel_reg || !cpu_is_omap44xx())
-		return;
-
-	mask = clk->flags & CLOCK_CLKOUTX2 ?
-			OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
-			OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
-
-	v = __raw_readl(clk->clksel_reg);
-	/* Set the bit to deny gatectrl */
-	v |= mask;
-	__raw_writel(v, clk->clksel_reg);
-}
-
-const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = {
-	.allow_idle	= omap4_dpllmx_allow_gatectrl,
-	.deny_idle      = omap4_dpllmx_deny_gatectrl,
-};
-
-/**
- * omap4_dpll_lpmode_recalc - compute DPLL low-power setting
- * @dd: pointer to the dpll data structure
- *
- * Calculates if low-power mode can be enabled based upon the last
- * multiplier and divider values calculated. If low-power mode can be
- * enabled, then the bit to enable low-power mode is stored in the
- * last_rounded_lpmode variable. This implementation is based upon the
- * criteria for enabling low-power mode as described in the OMAP4430/60
- * Public TRM section 3.6.3.3.2 "Enable Control, Status, and Low-Power
- * Operation Mode".
- */
-static void omap4_dpll_lpmode_recalc(struct dpll_data *dd)
-{
-	long fint, fout;
-
-	fint = __clk_get_rate(dd->clk_ref) / (dd->last_rounded_n + 1);
-	fout = fint * dd->last_rounded_m;
-
-	if ((fint < OMAP4_DPLL_LP_FINT_MAX) && (fout < OMAP4_DPLL_LP_FOUT_MAX))
-		dd->last_rounded_lpmode = 1;
-	else
-		dd->last_rounded_lpmode = 0;
-}
-
-/**
- * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit
- * @clk: struct clk * of the DPLL to compute the rate for
- *
- * Compute the output rate for the OMAP4 DPLL represented by @clk.
- * Takes the REGM4XEN bit into consideration, which is needed for the
- * OMAP4 ABE DPLL.  Returns the DPLL's output rate (before M-dividers)
- * upon success, or 0 upon error.
- */
-unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
-			unsigned long parent_rate)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-	u32 v;
-	unsigned long rate;
-	struct dpll_data *dd;
-
-	if (!clk || !clk->dpll_data)
-		return 0;
-
-	dd = clk->dpll_data;
-
-	rate = omap2_get_dpll_rate(clk);
-
-	/* regm4xen adds a multiplier of 4 to DPLL calculations */
-	v = __raw_readl(dd->control_reg);
-	if (v & OMAP4430_DPLL_REGM4XEN_MASK)
-		rate *= OMAP4430_REGM4XEN_MULT;
-
-	return rate;
-}
-
-/**
- * omap4_dpll_regm4xen_round_rate - round DPLL rate, considering REGM4XEN bit
- * @clk: struct clk * of the DPLL to round a rate for
- * @target_rate: the desired rate of the DPLL
- *
- * Compute the rate that would be programmed into the DPLL hardware
- * for @clk if set_rate() were to be provided with the rate
- * @target_rate.  Takes the REGM4XEN bit into consideration, which is
- * needed for the OMAP4 ABE DPLL.  Returns the rounded rate (before
- * M-dividers) upon success, -EINVAL if @clk is null or not a DPLL, or
- * ~0 if an error occurred in omap2_dpll_round_rate().
- */
-long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
-				    unsigned long target_rate,
-				    unsigned long *parent_rate)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-	struct dpll_data *dd;
-	long r;
-
-	if (!clk || !clk->dpll_data)
-		return -EINVAL;
-
-	dd = clk->dpll_data;
-
-	dd->last_rounded_m4xen = 0;
-
-	/*
-	 * First try to compute the DPLL configuration for
-	 * target rate without using the 4X multiplier.
-	 */
-	r = omap2_dpll_round_rate(hw, target_rate, NULL);
-	if (r != ~0)
-		goto out;
-
-	/*
-	 * If we did not find a valid DPLL configuration, try again, but
-	 * this time see if using the 4X multiplier can help. Enabling the
-	 * 4X multiplier is equivalent to dividing the target rate by 4.
-	 */
-	r = omap2_dpll_round_rate(hw, target_rate / OMAP4430_REGM4XEN_MULT,
-				  NULL);
-	if (r == ~0)
-		return r;
-
-	dd->last_rounded_rate *= OMAP4430_REGM4XEN_MULT;
-	dd->last_rounded_m4xen = 1;
-
-out:
-	omap4_dpll_lpmode_recalc(dd);
-
-	return dd->last_rounded_rate;
-}