diff options
Diffstat (limited to 'arch/arm/mach-omap2/prcm-common.h')
| -rw-r--r-- | arch/arm/mach-omap2/prcm-common.h | 67 |
1 files changed, 62 insertions, 5 deletions
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index ff1ac4a82a04..5e3544a63526 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ #ifndef __ARCH_ASM_MACH_OMAP2_PRCM_COMMON_H #define __ARCH_ASM_MACH_OMAP2_PRCM_COMMON_H @@ -8,10 +9,6 @@ * Copyright (C) 2007-2009 Nokia Corporation * * Written by Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* Module offsets from both CM_BASE & PRM_BASE */ @@ -51,6 +48,12 @@ /* * TI81XX PRM module offsets */ +#define TI814X_PRM_DSP_MOD 0x0a00 +#define TI814X_PRM_HDVICP_MOD 0x0c00 +#define TI814X_PRM_ISP_MOD 0x0d00 +#define TI814X_PRM_HDVPSS_MOD 0x0e00 +#define TI814X_PRM_GFX_MOD 0x0f00 + #define TI81XX_PRM_DEVICE_MOD 0x0000 #define TI816X_PRM_ACTIVE_MOD 0x0a00 #define TI81XX_PRM_DEFAULT_MOD 0x0b00 @@ -58,6 +61,7 @@ #define TI816X_PRM_IVAHD1_MOD 0x0d00 #define TI816X_PRM_IVAHD2_MOD 0x0e00 #define TI816X_PRM_SGX_MOD 0x0f00 +#define TI81XX_PRM_ALWON_MOD 0x1800 /* 24XX register bits shared between CM & PRM registers */ @@ -427,6 +431,28 @@ #define MAX_IOPAD_LATCH_TIME 100 # ifndef __ASSEMBLER__ +#include <linux/delay.h> + +/** + * omap_test_timeout - busy-loop, testing a condition + * @cond: condition to test until it evaluates to true + * @timeout: maximum number of microseconds in the timeout + * @index: loop index (integer) + * + * Loop waiting for @cond to become true or until at least @timeout + * microseconds have passed. To use, define some integer @index in the + * calling code. After running, if @index == @timeout, then the loop has + * timed out. + */ +#define omap_test_timeout(cond, timeout, index) \ +({ \ + for (index = 0; index < timeout; index++) { \ + if (cond) \ + break; \ + udelay(1); \ + } \ +}) + /** * struct omap_prcm_irq - describes a PRCM interrupt bit * @name: a short name describing the interrupt type, e.g. "wkup" or "io" @@ -449,6 +475,7 @@ struct omap_prcm_irq { * struct omap_prcm_irq_setup - PRCM interrupt controller details * @ack: PRM register offset for the first PRM_IRQSTATUS_MPU register * @mask: PRM register offset for the first PRM_IRQENABLE_MPU register + * @pm_ctrl: PRM register offset for the PRM_IO_PMCTRL register * @nr_regs: number of PRM_IRQ{STATUS,ENABLE}_MPU* registers * @nr_irqs: number of entries in the @irqs array * @irqs: ptr to an array of PRCM interrupt bits (see @nr_irqs) @@ -457,6 +484,7 @@ struct omap_prcm_irq { * @ocp_barrier: fn ptr to force buffered PRM writes to complete * @save_and_clear_irqen: fn ptr to save and clear IRQENABLE regs * @restore_irqen: fn ptr to save and clear IRQENABLE regs + * @reconfigure_io_chain: fn ptr to reconfigure IO chain * @saved_mask: IRQENABLE regs are saved here during suspend * @priority_mask: 1 bit per IRQ, set to 1 if omap_prcm_irq.priority = true * @base_irq: base dynamic IRQ number, returned from irq_alloc_descs() in init @@ -470,6 +498,7 @@ struct omap_prcm_irq { struct omap_prcm_irq_setup { u16 ack; u16 mask; + u16 pm_ctrl; u8 nr_regs; u8 nr_irqs; const struct omap_prcm_irq *irqs; @@ -478,6 +507,7 @@ struct omap_prcm_irq_setup { void (*ocp_barrier)(void); void (*save_and_clear_irqen)(u32 *saved_mask); void (*restore_irqen)(u32 *saved_mask); + void (*reconfigure_io_chain)(void); u32 *saved_mask; u32 *priority_mask; int base_irq; @@ -492,7 +522,34 @@ struct omap_prcm_irq_setup { .priority = _priority \ } -extern void omap_prcm_irq_cleanup(void); +struct omap_domain_base { + u32 pa; + void __iomem *va; + s16 offset; +}; + +/** + * struct omap_prcm_init_data - PRCM driver init data + * @index: clock memory mapping index to be used + * @mem: IO mem pointer for this module + * @phys: IO mem physical base address for this module + * @offset: module base address offset from the IO base + * @flags: PRCM module init flags + * @device_inst_offset: device instance offset within the module address space + * @init: low level PRCM init function for this module + * @np: device node for this PRCM module + */ +struct omap_prcm_init_data { + int index; + void __iomem *mem; + u32 phys; + s16 offset; + u16 flags; + s32 device_inst_offset; + int (*init)(const struct omap_prcm_init_data *data); + struct device_node *np; +}; + extern int omap_prcm_register_chain_handler( struct omap_prcm_irq_setup *irq_setup); extern int omap_prcm_event_to_irq(const char *event); |