diff options
Diffstat (limited to 'arch/arm/mach-pxa/Kconfig')
| -rw-r--r-- | arch/arm/mach-pxa/Kconfig | 613 |
1 files changed, 42 insertions, 571 deletions
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index a8427115ee07..10e472f4fa43 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -1,132 +1,60 @@ -if ARCH_PXA - -menu "Intel PXA2xx/PXA3xx Implementations" +# SPDX-License-Identifier: GPL-2.0-only +menuconfig ARCH_PXA + bool "PXA2xx/PXA3xx-based" + depends on ARCH_MULTI_V5 + depends on CPU_LITTLE_ENDIAN + select ARM_CPU_SUSPEND if PM + select CLKSRC_PXA + select CLKSRC_MMIO + select TIMER_OF + select CPU_XSCALE if !CPU_XSC3 + select GPIO_PXA + select GPIOLIB + select PLAT_PXA + help + Support for Intel/Marvell's PXA2xx/PXA3xx processor line. -comment "Intel/Marvell Dev Platforms (sorted by hardware release time)" +if ARCH_PXA -config MACH_PXA3XX_DT - bool "Support PXA3xx platforms from device tree" - select CPU_PXA300 - select HAVE_PWM +config MACH_PXA25X_DT + bool "Support PXA25x platforms from device tree" + select PINCTRL select POWER_SUPPLY - select PXA3xx + select PXA25x select USE_OF help - Include support for Marvell PXA3xx based platforms using + Include support for Marvell PXA25x based platforms using the device tree. Needn't select any other machine while - MACH_PXA3XX_DT is enabled. - -config ARCH_LUBBOCK - bool "Intel DBPXA250 Development Platform (aka Lubbock)" - select PXA25x - select SA1111 + MACH_PXA25x_DT is enabled. -config MACH_MAINSTONE - bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)" - select HAVE_PWM +config MACH_PXA27X_DT + bool "Support PXA27x platforms from device tree" + select PINCTRL + select POWER_SUPPLY select PXA27x + select USE_OF + help + Include support for Marvell PXA27x based platforms using + the device tree. Needn't select any other machine while + MACH_PXA27X_DT is enabled. -config MACH_ZYLONITE - bool - select HAVE_PWM - select PXA3xx - -config MACH_ZYLONITE300 - bool "PXA3xx Development Platform (aka Zylonite) PXA300/310" +config MACH_PXA3XX_DT + bool "Support PXA3xx platforms from device tree" select CPU_PXA300 select CPU_PXA310 - select MACH_ZYLONITE - -config MACH_ZYLONITE320 - bool "PXA3xx Development Platform (aka Zylonite) PXA320" select CPU_PXA320 - select MACH_ZYLONITE - -config MACH_LITTLETON - bool "PXA3xx Form Factor Platform (aka Littleton)" - select CPU_PXA300 - select CPU_PXA310 - select PXA3xx - -config MACH_TAVOREVB - bool "PXA930 Evaluation Board (aka TavorEVB)" - select CPU_PXA930 - select CPU_PXA935 - select PXA3xx - -config MACH_SAAR - bool "PXA930 Handheld Platform (aka SAAR)" - select CPU_PXA930 - select CPU_PXA935 + select PINCTRL + select POWER_SUPPLY select PXA3xx - -comment "Third Party Dev Platforms (sorted by vendor name)" - -config ARCH_PXA_IDP - bool "Accelent Xscale IDP" - select PXA25x - -config ARCH_VIPER - bool "Arcom/Eurotech VIPER SBC" - select ARCOM_PCMCIA - select HAVE_PWM - select I2C_GPIO - select ISA - select PXA25x - select PXA_HAVE_ISA_IRQS - -config MACH_ARCOM_ZEUS - bool "Arcom/Eurotech ZEUS SBC" - select ARCOM_PCMCIA - select ISA - select PXA27x - select PXA_HAVE_ISA_IRQS - -config MACH_BALLOON3 - bool "Balloon 3 board" - select IWMMXT - select PXA27x - -config MACH_CSB726 - bool "Enable Cogent CSB726 System On a Module" - select IWMMXT - select PXA27x + select USE_OF help - Say Y here if you intend to run this kernel on a Cogent - CSB726 System On Module. - -config CSB726_CSB701 - bool "Enable support for CSB701 baseboard" - depends on MACH_CSB726 - -config MACH_ARMCORE - bool "CompuLab CM-X255/CM-X270 modules" - select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI - select IWMMXT - select MIGHT_HAVE_PCI - select NEED_MACH_IO_H if PCI - select PXA25x - select PXA27x - -config MACH_EM_X270 - bool "CompuLab EM-x270 platform" - select PXA27x - -config MACH_EXEDA - bool "CompuLab eXeda platform" - select PXA27x + Include support for Marvell PXA3xx based platforms using + the device tree. Needn't select any other machine while + MACH_PXA3XX_DT is enabled. -config MACH_CM_X300 - bool "CompuLab CM-X300 modules" - select CPU_PXA300 - select CPU_PXA310 - select HAVE_PWM - select PXA3xx +if ATAGS -config MACH_CAPC7117 - bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM" - select CPU_PXA320 - select PXA3xx +comment "Legacy board files" config ARCH_GUMSTIX bool "Gumstix XScale 255 boards" @@ -147,319 +75,6 @@ config GUMSTIX_AM300EPD endchoice -config MACH_INTELMOTE2 - bool "Intel Mote 2 Platform" - select IWMMXT - select PXA27x - -config MACH_STARGATE2 - bool "Intel Stargate 2 Platform" - select IWMMXT - select PXA27x - -config MACH_XCEP - bool "Iskratel Electronics XCEP" - select MTD - select MTD_CFI - select MTD_CFI_INTELEXT - select MTD_PHYSMAP - select PXA25x - select SMC91X - help - PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash. - Tuned for usage in Libera instruments for particle accelerators. - -config TRIZEPS_PXA - bool "PXA based Keith und Koep Trizeps DIMM-Modules" - -config MACH_TRIZEPS4 - bool "Keith und Koep Trizeps4 DIMM-Module" - depends on TRIZEPS_PXA - select PXA27x - select TRIZEPS_PCMCIA - -config MACH_TRIZEPS4WL - bool "Keith und Koep Trizeps4-WL DIMM-Module" - depends on TRIZEPS_PXA - select PXA27x - select TRIZEPS_PCMCIA - -choice - prompt "Select base board for Trizeps module" - depends on TRIZEPS_PXA - -config MACH_TRIZEPS_CONXS - bool "ConXS Eval Board" - -config MACH_TRIZEPS_UCONXS - bool "uConXS Eval Board" - -config MACH_TRIZEPS_ANY - bool "another Board" - -endchoice - -config ARCOM_PCMCIA - bool - help - Generic option for Arcom Viper/Zeus PCMCIA - -config TRIZEPS_PCMCIA - bool - help - Enable PCMCIA support for Trizeps modules - -config MACH_LOGICPD_PXA270 - bool "LogicPD PXA270 Card Engine Development Platform" - select HAVE_PWM - select PXA27x - -config MACH_PCM027 - bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" - select IWMMXT - select PXA27x - -config MACH_PCM990_BASEBOARD - bool "PHYTEC PCM-990 development board" - depends on MACH_PCM027 - select HAVE_PWM - -choice - prompt "display on pcm990" - depends on MACH_PCM990_BASEBOARD - -config PCM990_DISPLAY_SHARP - bool "sharp lq084v1dg21 stn display" - -config PCM990_DISPLAY_NEC - bool "nec nl6448bc20_18d tft display" - -config PCM990_DISPLAY_NONE - bool "no display" - -endchoice - -config MACH_COLIBRI - bool "Toradex Colibri PXA270" - select PXA27x - -config MACH_COLIBRI_PXA270_INCOME - bool "Income s.r.o. PXA270 SBC" - depends on MACH_COLIBRI - select HAVE_PWM - select PXA27x - -config MACH_COLIBRI300 - bool "Toradex Colibri PXA300/310" - select CPU_PXA300 - select CPU_PXA310 - select PXA3xx - -config MACH_COLIBRI320 - bool "Toradex Colibri PXA320" - select CPU_PXA320 - select PXA3xx - -config MACH_COLIBRI_EVALBOARD - bool "Toradex Colibri Evaluation Carrier Board support" - depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320 - -config MACH_VPAC270 - bool "Voipac PXA270" - select HAVE_PATA_PLATFORM - select PXA27x - help - PXA270 based Single Board Computer. - -comment "End-user Products (sorted by vendor name)" - -config MACH_H4700 - bool "HP iPAQ hx4700" - select HAVE_PWM - select IWMMXT - select PXA27x - -config MACH_H5000 - bool "HP iPAQ h5000" - select PXA25x - -config MACH_HIMALAYA - bool "HTC Himalaya Support" - select CPU_PXA26x - -config MACH_MAGICIAN - bool "Enable HTC Magician Support" - select HAVE_PWM - select IWMMXT - select PXA27x - -config MACH_MIOA701 - bool "Mitac Mio A701 Support" - select GPIO_SYSFS - select HAVE_PWM - select IWMMXT - select PXA27x - help - Say Y here if you intend to run this kernel on a - MIO A701. Currently there is only basic support - for this PDA. - -config PXA_EZX - bool "Motorola EZX Platform" - select HAVE_PWM - select IWMMXT - select PXA27x - -config MACH_EZX_A780 - bool "Motorola EZX A780" - default y - depends on PXA_EZX - -config MACH_EZX_E680 - bool "Motorola EZX E680" - default y - depends on PXA_EZX - -config MACH_EZX_A1200 - bool "Motorola EZX A1200" - default y - depends on PXA_EZX - -config MACH_EZX_A910 - bool "Motorola EZX A910" - default y - depends on PXA_EZX - -config MACH_EZX_E6 - bool "Motorola EZX E6" - default y - depends on PXA_EZX - -config MACH_EZX_E2 - bool "Motorola EZX E2" - default y - depends on PXA_EZX - -config MACH_MP900C - bool "Nec Mobilepro 900/c" - select PXA25x - -config ARCH_PXA_PALM - bool "PXA based Palm PDAs" - select HAVE_PWM - -config MACH_PALM27X - bool - -config MACH_PALMTE2 - bool "Palm Tungsten|E2" - default y - depends on ARCH_PXA_PALM - select PXA25x - help - Say Y here if you intend to run this kernel on a Palm Tungsten|E2 - handheld computer. - -config MACH_PALMTC - bool "Palm Tungsten|C" - default y - depends on ARCH_PXA_PALM - select PXA25x - help - Say Y here if you intend to run this kernel on a Palm Tungsten|C - handheld computer. - -config MACH_PALMT5 - bool "Palm Tungsten|T5" - default y - depends on ARCH_PXA_PALM - select IWMMXT - select MACH_PALM27X - select PXA27x - help - Say Y here if you intend to run this kernel on a Palm Tungsten|T5 - handheld computer. - -config MACH_PALMTX - bool "Palm T|X" - default y - depends on ARCH_PXA_PALM - select IWMMXT - select MACH_PALM27X - select PXA27x - help - Say Y here if you intend to run this kernel on a Palm T|X - handheld computer. - -config MACH_PALMZ72 - bool "Palm Zire 72" - default y - depends on ARCH_PXA_PALM - select IWMMXT - select MACH_PALM27X - select PXA27x - help - Say Y here if you intend to run this kernel on Palm Zire 72 - handheld computer. - -config MACH_PALMLD - bool "Palm LifeDrive" - default y - depends on ARCH_PXA_PALM - select IWMMXT - select MACH_PALM27X - select PXA27x - help - Say Y here if you intend to run this kernel on a Palm LifeDrive - handheld computer. - -config PALM_TREO - bool - depends on ARCH_PXA_PALM - -config MACH_CENTRO - bool "Palm Centro 685 (GSM)" - default y - depends on ARCH_PXA_PALM - select IWMMXT - select MACH_PALM27X - select PALM_TREO - select PXA27x - help - Say Y here if you intend to run this kernel on Palm Centro 685 (GSM) - smartphone. - -config MACH_TREO680 - bool "Palm Treo 680" - default y - depends on ARCH_PXA_PALM - select IWMMXT - select MACH_PALM27X - select PALM_TREO - select PXA27x - help - Say Y here if you intend to run this kernel on Palm Treo 680 - smartphone. - -config MACH_RAUMFELD_RC - bool "Raumfeld Controller" - select CPU_PXA300 - select HAVE_PWM - select POWER_SUPPLY - select PXA3xx - -config MACH_RAUMFELD_CONNECTOR - bool "Raumfeld Connector" - select CPU_PXA300 - select POWER_SUPPLY - select PXA3xx - -config MACH_RAUMFELD_SPEAKER - bool "Raumfeld Speaker" - select CPU_PXA300 - select POWER_SUPPLY - select PXA3xx - config PXA_SHARPSL bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" select SHARP_PARAM @@ -479,30 +94,6 @@ config PXA_SHARPSL_DETECT_MACH_ID the Zaurus machine ID at run-time. For latest kexec-based boot loader, this is not necessary. -config MACH_POODLE - bool "Enable Sharp SL-5600 (Poodle) Support" - depends on PXA_SHARPSL - select PXA25x - select SHARP_LOCOMO - -config MACH_CORGI - bool "Enable Sharp SL-C700 (Corgi) Support" - depends on PXA_SHARPSL - select PXA25x - select PXA_SHARP_C7xx - -config MACH_SHEPHERD - bool "Enable Sharp SL-C750 (Shepherd) Support" - depends on PXA_SHARPSL - select PXA25x - select PXA_SHARP_C7xx - -config MACH_HUSKY - bool "Enable Sharp SL-C760 (Husky) Support" - depends on PXA_SHARPSL - select PXA25x - select PXA_SHARP_C7xx - config MACH_AKITA bool "Enable Sharp SL-1000 (Akita) Support" depends on PXA_SHARPSL @@ -524,118 +115,23 @@ config MACH_BORZOI select PXA27x select PXA_SHARP_Cxx00 -config MACH_TOSA - bool "Enable Sharp SL-6000x (Tosa) Support" - depends on PXA_SHARPSL - select PXA25x - -config TOSA_BT - tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" - depends on MACH_TOSA - select RFKILL - help - This is a simple driver that is able to control - the state of built in bluetooth chip on tosa. - -config TOSA_USE_EXT_KEYCODES - bool "Tosa keyboard: use extended keycodes" - depends on MACH_TOSA - default n - help - Say Y here to enable the tosa keyboard driver to generate extended - (>= 127) keycodes. Be aware, that they can't be correctly interpreted - by either console keyboard driver or by Kdrive keybd driver. - - Say Y only if you know, what you are doing! - -config MACH_ICONTROL - bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM" - select CPU_PXA320 - select PXA3xx - -config ARCH_PXA_ESERIES - bool "PXA based Toshiba e-series PDAs" - select FB_W100 - select PXA25x - -config MACH_E330 - bool "Toshiba e330" - default y - depends on ARCH_PXA_ESERIES - help - Say Y here if you intend to run this kernel on a Toshiba - e330 family PDA. - -config MACH_E350 - bool "Toshiba e350" - default y - depends on ARCH_PXA_ESERIES - help - Say Y here if you intend to run this kernel on a Toshiba - e350 family PDA. - -config MACH_E740 - bool "Toshiba e740" - default y - depends on ARCH_PXA_ESERIES - help - Say Y here if you intend to run this kernel on a Toshiba - e740 family PDA. - -config MACH_E750 - bool "Toshiba e750" - default y - depends on ARCH_PXA_ESERIES - help - Say Y here if you intend to run this kernel on a Toshiba - e750 family PDA. - -config MACH_E400 - bool "Toshiba e400" - default y - depends on ARCH_PXA_ESERIES - help - Say Y here if you intend to run this kernel on a Toshiba - e400 family PDA. - -config MACH_E800 - bool "Toshiba e800" - default y - depends on ARCH_PXA_ESERIES - help - Say Y here if you intend to run this kernel on a Toshiba - e800 family PDA. - -config MACH_ZIPIT2 - bool "Zipit Z2 Handheld" - select HAVE_PWM - select PXA27x -endmenu +endif # ATAGS config PXA25x bool select CPU_XSCALE - select CPU_FREQ_TABLE if CPU_FREQ help Select code specific to PXA21x/25x/26x variants config PXA27x bool select CPU_XSCALE - select CPU_FREQ_TABLE if CPU_FREQ help Select code specific to PXA27x variants -config CPU_PXA26x - bool - select PXA25x - help - Select code specific to PXA26x (codename Dalhart) - config PXA3xx bool select CPU_XSC3 - select CPU_FREQ_TABLE if CPU_FREQ help Select code specific to PXA3xx variants @@ -648,7 +144,6 @@ config CPU_PXA300 config CPU_PXA310 bool select CPU_PXA300 - select PXA310_ULPI if USB_ULPI help PXA310 (codename Monahans-LV) @@ -658,24 +153,6 @@ config CPU_PXA320 help PXA320 (codename Monahans-P) -config CPU_PXA930 - bool - select PXA3xx - help - PXA930 (codename Tavor-P) - -config CPU_PXA935 - bool - select CPU_PXA930 - help - PXA935 (codename Tavor-P65) - -config PXA_SHARP_C7xx - bool - select SHARPSL_PM - help - Enable support for all Sharp C7xx models - config PXA_SHARP_Cxx00 bool select SHARPSL_PM @@ -694,10 +171,4 @@ config SHARPSL_PM_MAX1111 select SPI select SPI_MASTER -config PXA_HAVE_ISA_IRQS - bool - -config PXA310_ULPI - bool - endif |