diff options
Diffstat (limited to 'arch/arm/mach-shmobile/include/mach/entry-macro.S')
| -rw-r--r-- | arch/arm/mach-shmobile/include/mach/entry-macro.S | 104 |
1 files changed, 4 insertions, 100 deletions
diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S index c0c264366d7a..26e401167605 100644 --- a/arch/arm/mach-shmobile/include/mach/entry-macro.S +++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S @@ -1,5 +1,5 @@ /* - * Copyright (C) 2008 Renesas Solutions Corp. + * Copyright (C) 2010 Paul Mundt * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,104 +14,8 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include <mach/hardware.h> -#include <mach/irqs.h> - - .macro disable_fiq - .endm - -#if !defined(CONFIG_ARCH_SH73A0) - .macro get_irqnr_preamble, base, tmp - ldr \base, =INTFLGA - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqnr, [\base] - cmp \irqnr, #0 - beq 1000f - /* intevt to irq number */ - lsr \irqnr, \irqnr, #0x5 - subs \irqnr, \irqnr, #16 - -1000: - .endm +#if defined(CONFIG_ARM_GIC) +#include <mach/entry-macro-gic.S> #else -/* - * arch/arm/mach-realview/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for RealView platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <asm/hardware/gic.h> - - .macro get_irqnr_preamble, base, tmp - ldr \base, =(0xf0000100) - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - -/* - * The interrupt numbering scheme is defined in the - * interrupt controller spec. To wit: - * - * Interrupts 0-15 are IPI - * 16-28 are reserved - * 29-31 are local. We allow 30 to be used for the watchdog. - * 32-1020 are global - * 1021-1022 are reserved - * 1023 is "spurious" (no interrupt) - * - * For now, we ignore all local interrupts so only return an interrupt if it's - * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. - * - * A simple read from the controller will tell us the number of the highest - * priority enabled interrupt. We then just need to check whether it is in the - * valid range for an IRQ (30-1020 inclusive). - */ - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - ldr \irqstat, [\base, #GIC_CPU_INTACK] - /* bits 12-10 = src CPU, 9-0 = int # */ - - ldr \tmp, =1021 - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #29 - cmpcc \irqnr, \irqnr - cmpne \irqnr, \tmp - cmpcs \irqnr, \irqnr - - .endm - - /* We assume that irqstat (the raw value of the IRQ acknowledge - * register) is preserved from the macro above. - * If there is an IPI, we immediately signal end of interrupt on the - * controller, since this requires the original irqstat value which - * we won't easily be able to recreate later. - */ - - .macro test_for_ipi, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #16 - strcc \irqstat, [\base, #GIC_CPU_EOI] - cmpcs \irqnr, \irqnr - .endm - - /* As above, this assumes that irqstat and base are preserved.. */ - - .macro test_for_ltirq, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - mov \tmp, #0 - cmp \irqnr, #29 - moveq \tmp, #1 - streq \irqstat, [\base, #GIC_CPU_EOI] - cmp \tmp, #0 - .endm +#include <mach/entry-macro-intc.S> #endif |