diff options
Diffstat (limited to 'arch/arm64/Kconfig.platforms')
| -rw-r--r-- | arch/arm64/Kconfig.platforms | 336 |
1 files changed, 270 insertions, 66 deletions
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index f5f0c813dfec..fff14807c965 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -1,17 +1,28 @@ +# SPDX-License-Identifier: GPL-2.0-only menu "Platform selection" config ARCH_ACTIONS bool "Actions Semi Platforms" select OWL_TIMER + select PINCTRL help This enables support for the Actions Semiconductor S900 SoC family. +config ARCH_AIROHA + bool "Airoha SoC Support" + select ARM_PSCI + select HAVE_ARM_ARCH_TIMER + help + This enables support for the ARM64 based Airoha SoCs. + config ARCH_SUNXI bool "Allwinner sunxi 64-bit SoC Family" select ARCH_HAS_RESET_CONTROLLER - select GENERIC_IRQ_CHIP select PINCTRL select RESET_CONTROLLER + select SUN4I_TIMER + select SUN6I_R_INTC + select SUNXI_NMI_INTC help This enables support for Allwinner sunxi based SoCs like the A64. @@ -22,18 +33,44 @@ config ARCH_ALPINE This enables support for the Annapurna Labs Alpine Soc family. +config ARCH_APPLE + bool "Apple Silicon SoC family" + select APPLE_AIC + help + This enables support for Apple's in-house ARM SoC family, such + as the Apple M1. + +config ARCH_ARTPEC + bool "Axis Communications ARTPEC SoC Family" + depends on ARCH_EXYNOS + select ARM_GIC + help + This enables support for the ARMv8 based ARTPEC SoC Family. + +config ARCH_AXIADO + bool "Axiado SoC Family" + select GPIOLIB + help + This enables support for Axiado SoC family like AX3000 + +menuconfig ARCH_BCM + bool "Broadcom SoC Support" + +if ARCH_BCM + config ARCH_BCM2835 bool "Broadcom BCM2835 family" select TIMER_OF select GPIOLIB + select MFD_CORE select PINCTRL select PINCTRL_BCM2835 select ARM_AMBA + select ARM_GIC select ARM_TIMER_SP804 - select HAVE_ARM_ARCH_TIMER help - This enables support for the Broadcom BCM2837 SoC. - This SoC is used in the Raspberry Pi 3 device. + This enables support for the Broadcom BCM2837 and BCM2711 SoC. + These SoCs are used in the Raspberry Pi 3 and 4 devices. config ARCH_BCM_IPROC bool "Broadcom iProc SoC Family" @@ -43,39 +80,79 @@ config ARCH_BCM_IPROC help This enables support for Broadcom iProc based SoCs +config ARCH_BCMBCA + bool "Broadcom Broadband Carrier Access (BCA) origin SoC" + select GPIOLIB + help + Say Y if you intend to run the kernel on a Broadcom Broadband ARM-based + BCA chipset. + + This enables support for Broadcom BCA ARM-based broadband chipsets, + including the DSL, PON and Wireless family of chips. + +config ARCH_BRCMSTB + bool "Broadcom Set-Top-Box SoCs" + select ARCH_HAS_RESET_CONTROLLER + select GENERIC_IRQ_CHIP + select PINCTRL + help + This enables support for Broadcom's ARMv8 Set Top Box SoCs + +endif + config ARCH_BERLIN bool "Marvell Berlin SoC Family" select DW_APB_ICTL + select DW_APB_TIMER_OF select GPIOLIB select PINCTRL help This enables support for Marvell Berlin SoC Family -config ARCH_BRCMSTB - bool "Broadcom Set-Top-Box SoCs" - select BRCMSTB_L2_IRQ - select GENERIC_IRQ_CHIP +config ARCH_BITMAIN + bool "Bitmain SoC Platforms" help - This enables support for Broadcom's ARMv8 Set Top Box SoCs + This enables support for the Bitmain SoC Family. + +config ARCH_BLAIZE + bool "Blaize SoC Platforms" + help + This enables support for the Blaize SoC family + +config ARCH_BST + bool "Black Sesame Technologies SoC Family" + help + This enables support for Black Sesame Technologies (BST) SoC family. + BST produces automotive-grade system-on-chips for intelligent driving, + focusing on computer vision and AI capabilities. The BST C1200 family + includes SoCs for ADAS and autonomous driving applications. + +config ARCH_CIX + bool "Cixtech SoC family" + help + This enables support for the Cixtech SoC family, + like P1(sky1). config ARCH_EXYNOS - bool "ARMv8 based Samsung Exynos SoC family" + bool "Samsung Exynos SoC family" select COMMON_CLK_SAMSUNG + select CLKSRC_EXYNOS_MCT select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS select EXYNOS_PMU - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select HAVE_S3C_RTC if RTC_CLASS select PINCTRL select PINCTRL_EXYNOS + select PM_GENERIC_DOMAINS if PM select SOC_SAMSUNG help This enables support for ARMv8 based Samsung Exynos SoC family. -config ARCH_LAYERSCAPE - bool "ARMv8 based Freescale Layerscape SoC family" - select EDAC_SUPPORT +config ARCH_K3 + bool "Texas Instruments Inc. K3 multicore SoC architecture" + select SOC_TI + select TI_K3_SOCINFO help - This enables support for the Freescale Layerscape SoC family. + This enables support for Texas Instruments' K3 multicore SoC + architecture. config ARCH_LG1K bool "LG Electronics LG1K SoC Family" @@ -90,22 +167,70 @@ config ARCH_HISI help This enables support for Hisilicon ARMv8 SoC family +config ARCH_KEEMBAY + bool "Keem Bay SoC" + help + This enables support for Intel Movidius SoC code-named Keem Bay. + config ARCH_MEDIATEK - bool "Mediatek MT65xx & MT81xx ARMv8 SoC" + bool "MediaTek SoC Family" select ARM_GIC select PINCTRL select MTK_TIMER help - Support for Mediatek MT65xx & MT81xx ARMv8 SoCs + This enables support for MediaTek MT27xx, MT65xx, MT76xx + & MT81xx ARMv8 SoCs config ARCH_MESON bool "Amlogic Platforms" + help + This enables support for the arm64 based Amlogic SoCs + such as the s905, S905X/D, S912, A113X/D or S905X/D2 + +menu "Microchip SoC support" + +config ARCH_MICROCHIP + bool + +config ARCH_LAN969X + bool "Microchip LAN969X SoC family" + select PINCTRL + select DW_APB_TIMER_OF + select ARCH_MICROCHIP + help + This enables support for the Microchip LAN969X ARMv8-based + SoC family of TSN-capable gigabit switches. + + The LAN969X Ethernet switch family provides a rich set of + switching features such as advanced TCAM-based VLAN and QoS + processing enabling delivery of differentiated services, and + security through TCAM-based frame processing using versatile + content aware processor (VCAP). + +config ARCH_SPARX5 + bool "Microchip Sparx5 SoC family" + select PINCTRL + select DW_APB_TIMER_OF + select ARCH_MICROCHIP + help + This enables support for the Microchip Sparx5 ARMv8-based + SoC family of TSN-capable gigabit switches. + + The SparX-5 Ethernet switch family provides a rich set of + switching features such as advanced TCAM-based VLAN and QoS + processing enabling delivery of differentiated services, and + security through TCAM-based frame processing using versatile + content aware processor (VCAP). + +endmenu + +config ARCH_MMP + bool "Marvell MMP SoC Family" select PINCTRL - select PINCTRL_MESON - select COMMON_CLK_AMLOGIC - select COMMON_CLK_GXBB + select PINCTRL_SINGLE help - This enables support for the Amlogic S905 SoCs. + This enables support for Marvell MMP SoC family, currently + supporting PXA1908 aka IAP140. config ARCH_MVEBU bool "Marvell EBU SoC Family" @@ -118,36 +243,108 @@ config ARCH_MVEBU select MVEBU_ICU select MVEBU_ODMI select MVEBU_PIC + select MVEBU_SEI select OF_GPIO select PINCTRL select PINCTRL_ARMADA_37XX select PINCTRL_ARMADA_AP806 select PINCTRL_ARMADA_CP110 + select PINCTRL_AC5 help - This enables support for Marvell EBU familly, including: + This enables support for Marvell EBU family, including: - Armada 3700 SoC Family - Armada 7K SoC Family - Armada 8K SoC Family + - 98DX2530 SoC Family + +menuconfig ARCH_NXP + bool "NXP SoC support" + +if ARCH_NXP + +config ARCH_LAYERSCAPE + bool "Freescale Layerscape SoC family" + help + This enables support for the Freescale Layerscape SoC family. + +config ARCH_MXC + bool "NXP i.MX SoC family" + select ARM64_ERRATUM_843419 + select ARM64_ERRATUM_845719 if COMPAT + select IMX_GPCV2 + select IMX_GPCV2_PM_DOMAINS + select PM + select PM_GENERIC_DOMAINS + select SOC_BUS + select TIMER_IMX_SYS_CTR + help + This enables support for the ARMv8 based SoCs in the + NXP i.MX family. + +config ARCH_S32 + bool "NXP S32 SoC Family" + help + This enables support for the NXP S32 family of processors. + +endif + +config ARCH_MA35 + bool "Nuvoton MA35 Architecture" + select GPIOLIB + select PINCTRL + select RESET_CONTROLLER + help + This enables support for the ARMv8 based Nuvoton MA35 series SoCs. + +config ARCH_NPCM + bool "Nuvoton NPCM Architecture" + select PINCTRL + select GPIOLIB + select NPCM7XX_TIMER + select RESET_CONTROLLER + select MFD_SYSCON + help + General support for NPCM8xx BMC (Arbel). + Nuvoton NPCM8xx BMC based on the Cortex A35. + +config ARCH_PENSANDO + bool "AMD Pensando Platforms" + help + This enables support for the ARMv8 based AMD Pensando SoC + family to include the Elba SoC. + + AMD Pensando SoCs support a range of Distributed Services + Cards in PCIe format installed into servers. The Elba + SoC includes 16 Cortex A-72 CPU cores, 144 P4-programmable + cores for a minimal latency/jitter datapath, and network + interfaces up to 200 Gb/s. config ARCH_QCOM bool "Qualcomm Platforms" select GPIOLIB select PINCTRL + select HAVE_PWRCTRL if PCI + select HAVE_SHARED_GPIOS help This enables support for the ARMv8 based Qualcomm chipsets. config ARCH_REALTEK bool "Realtek Platforms" + select RESET_CONTROLLER help This enables support for the ARMv8 based Realtek chipsets, like the RTD1295. +config ARCH_RENESAS + bool "Renesas SoC Platforms" + help + This enables support for the ARMv8 based Renesas SoCs. + config ARCH_ROCKCHIP bool "Rockchip Platforms" select ARCH_HAS_RESET_CONTROLLER - select GPIOLIB select PINCTRL - select PINCTRL_ROCKCHIP + select PM select ROCKCHIP_TIMER help This enables support for the ARMv8 based Rockchip chipsets, @@ -158,44 +355,49 @@ config ARCH_SEATTLE help This enables support for AMD Seattle SOC Family -config ARCH_SHMOBILE - bool - -config ARCH_RENESAS - bool "Renesas SoC Platforms" - select ARCH_SHMOBILE - select PINCTRL - select PM - select PM_GENERIC_DOMAINS - select RENESAS_IRQC - select SOC_BUS +config ARCH_INTEL_SOCFPGA + bool "Intel's SoCFPGA ARMv8 Families" help - This enables support for the ARMv8 based Renesas SoCs. - -config ARCH_R8A7795 - bool "Renesas R-Car H3 SoC Platform" - depends on ARCH_RENESAS - help - This enables support for the Renesas R-Car H3 SoC. + This enables support for Intel's SoCFPGA ARMv8 families: + Stratix 10 (ex. Altera), Stratix10 Software Virtual Platform, + Agilex and eASIC N5X. -config ARCH_R8A7796 - bool "Renesas R-Car M3-W SoC Platform" - depends on ARCH_RENESAS +config ARCH_SOPHGO + bool "Sophgo SoCs" + select ARCH_HAS_RESET_CONTROLLER help - This enables support for the Renesas R-Car M3-W SoC. + This enables support for Sophgo SoC platform hardware. -config ARCH_STRATIX10 - bool "Altera's Stratix 10 SoCFPGA Family" +config ARCH_STM32 + bool "STMicroelectronics STM32 SoC Family" + select GPIOLIB + select PINCTRL + select ARM_SMC_MBOX + select ARM_SCMI_PROTOCOL + select REGULATOR + select REGULATOR_ARM_SCMI + select COMMON_CLK_SCMI + select STM32_FIREWALL help - This enables support for Altera's Stratix 10 SoCFPGA Family. + This enables support for ARMv8 based STMicroelectronics + STM32 family, including: + - STM32MP21: + - STM32MP211, STM32MP213, STM32MP215. + - STM32MP23: + - STM32MP231, STM32MP233, STM32MP235. + - STM32MP25: + - STM32MP251, STM32MP253, STM32MP255 and STM32MP257. + +config ARCH_SYNQUACER + bool "Socionext SynQuacer SoC Family" + select IRQ_FASTEOI_HIERARCHY_HANDLERS config ARCH_TEGRA bool "NVIDIA Tegra SoC Family" select ARCH_HAS_RESET_CONTROLLER - select CLKDEV_LOOKUP + select ARM_GIC_PM select CLKSRC_MMIO select TIMER_OF - select GENERIC_CLOCKEVENTS select GPIOLIB select PINCTRL select PM @@ -204,6 +406,12 @@ config ARCH_TEGRA help This enables support for the NVIDIA Tegra SoC family. +config ARCH_TESLA_FSD + bool "Tesla platform" + depends on ARCH_EXYNOS + help + Support for ARMv8 based Tesla platforms. + config ARCH_SPRD bool "Spreadtrum SoC platform" help @@ -225,37 +433,33 @@ config ARCH_UNIPHIER bool "Socionext UniPhier SoC Family" select ARCH_HAS_RESET_CONTROLLER select PINCTRL + select RESET_CONTROLLER help This enables support for Socionext UniPhier SoC family. config ARCH_VEXPRESS - bool "ARMv8 software model (Versatile Express)" - select COMMON_CLK_VERSATILE + bool "ARM Ltd Platforms" select GPIOLIB select PM select PM_GENERIC_DOMAINS - select POWER_RESET_VEXPRESS - select VEXPRESS_CONFIG help - This enables support for the ARMv8 software model (Versatile - Express). + This enables support for the ARM Ltd Platforms. -config ARCH_VULCAN - def_bool n +config ARCH_VISCONTI + bool "Toshiba Visconti SoC Family" + select PINCTRL + select PINCTRL_VISCONTI + help + This enables support for Toshiba Visconti SoCs Family. config ARCH_XGENE bool "AppliedMicro X-Gene SOC Family" help This enables support for AppliedMicro X-Gene SOC Family -config ARCH_ZX - bool "ZTE ZX SoC Family" - help - This enables support for ZTE ZX SoC Family - config ARCH_ZYNQMP bool "Xilinx ZynqMP Family" help This enables support for Xilinx ZynqMP Family -endmenu +endmenu # "Platform selection" |