diff options
Diffstat (limited to 'arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts')
| -rw-r--r-- | arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 260 |
1 files changed, 181 insertions, 79 deletions
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index d147c853ab05..12e26f99d4f0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -1,58 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber * Copyright (c) 2016 BayLibre, Inc. * Author: Kevin Hilman <khilman@kernel.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; #include "meson-gxbb.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb"; model = "Hardkernel ODROID-C2"; - + aliases { serial0 = &uart_AO; + ethernet0 = ðmac; }; chosen { @@ -72,13 +37,20 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + /* + * signal name from schematics: PWREN + */ gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; enable-active-high; + /* + * signal name from schematics: USB_POWER + */ + vin-supply = <&p5v0>; }; leds { compatible = "gpio-leds"; - blue { + led-blue { label = "c2:blue:alive"; gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; @@ -86,21 +58,41 @@ }; }; - tflash_vdd: regulator-tflash_vdd { - /* - * signal name from schematics: TFLASH_VDD_EN - */ + p5v0: regulator-p5v0 { + compatible = "regulator-fixed"; + + regulator-name = "P5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + hdmi_p5v0: regulator-hdmi-p5v0 { + compatible = "regulator-fixed"; + regulator-name = "HDMI_P5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + /* AP2331SA-7 */ + vin-supply = <&p5v0>; + }; + + tflash_vdd: regulator-tflash-vdd { compatible = "regulator-fixed"; regulator-name = "TFLASH_VDD"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + /* + * signal name from schematics: TFLASH_VDD_EN + */ gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>; enable-active-high; + /* U16 RT9179GB */ + vin-supply = <&vddio_ao3v3>; }; - tf_io: gpio-regulator-tf_io { + tf_io: gpio-regulator-tf-io { compatible = "regulator-gpio"; regulator-name = "TF_IO"; @@ -113,8 +105,10 @@ gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; gpios-states = <0>; - states = <3300000 0 - 1800000 1>; + states = <3300000 0>, + <1800000 1>; + /* U12/U13 RT9179GB */ + vin-supply = <&vddio_ao3v3>; }; vcc1v8: regulator-vcc1v8 { @@ -122,6 +116,9 @@ regulator-name = "VCC1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; + /* U18 RT9179GB */ + vin-supply = <&vddio_ao3v3>; }; vcc3v3: regulator-vcc3v3 { @@ -131,10 +128,100 @@ regulator-max-microvolt = <3300000>; }; + vddio_ao1v8: regulator-vddio-ao1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + /* U17 RT9179GB */ + vin-supply = <&p5v0>; + }; + + vddio_ao3v3: regulator-vddio-ao3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + /* U11 MP2161GJ-C499 */ + vin-supply = <&p5v0>; + }; + + ddr3_1v5: regulator-ddr3-1v5 { + compatible = "regulator-fixed"; + regulator-name = "DDR3_1V5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + /* U15 MP2161GJ-C499 */ + vin-supply = <&p5v0>; + }; + emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "ODROID-C2"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; +}; + +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; }; ðmac { @@ -144,10 +231,6 @@ phy-handle = <ð_phy0>; phy-mode = "rgmii"; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - amlogic,tx-delay-ns = <2>; mdio { @@ -156,24 +239,30 @@ #size-cells = <0>; eth_phy0: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ reg = <0>; - eee-broken-1000t; + + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; }; }; }; -&gpio_ao { - /* - * WARNING: The USB Hub on the Odroid-C2 needs a reset signal - * to be turned high in order to be detected by the USB Controller - * This signal should be handled by a USB specific power sequence - * in order to reset the Hub when USB bus is powered down. - */ - usb-hub { - gpio-hog; - gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "usb-hub-reset"; +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; + hdmi-supply = <&hdmi_p5v0>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; }; }; @@ -187,17 +276,20 @@ status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; pinctrl-names = "default"; + linux,rc-map-name = "rc-odroid"; }; -&pinctrl_aobus { +&gpio_ao { gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En", "USB HUB nRESET", "USB OTG Power En", "J7 Header Pin2", "IR In", "J7 Header Pin4", "J7 Header Pin6", "J7 Header Pin5", "J7 Header Pin7", - "HDMI CEC", "SYS LED"; + "HDMI CEC", "SYS LED", + /* GPIO_TEST_N */ + ""; }; -&pinctrl_periphs { +&gpio { gpio-line-names = /* Bank GPIOZ */ "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk", "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2", @@ -233,11 +325,9 @@ "J2 Header Pin12", "J2 Header Pin13", "J2 Header Pin8", "J2 Header Pin10", "", "", "", "", "", - "J2 Header Pin11", "", "J2 Header Pin7", + "J2 Header Pin11", "", "J2 Header Pin7", "", /* Bank GPIOCLK */ - "", "", "", "", - /* GPIO_TEST_N */ - ""; + "", "", "", ""; }; &saradc { @@ -253,15 +343,15 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&tflash_vdd>; vqmmc-supply = <&tf_io>; @@ -270,11 +360,11 @@ /* eMMC */ &sd_emmc_c { status = "okay"; - pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; max-frequency = <200000000>; non-removable; disable-wp; @@ -294,18 +384,30 @@ }; &usb0_phy { - status = "okay"; + status = "disabled"; phy-supply = <&usb_otg_pwr>; }; &usb1_phy { status = "okay"; + phy-supply = <&usb_otg_pwr>; }; &usb0 { - status = "okay"; + status = "disabled"; }; &usb1 { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; + + hub@1 { + /* Genesys Logic GL852G USB 2.0 hub */ + compatible = "usb5e3,610"; + reg = <1>; + vdd-supply = <&p5v0>; + reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>; + }; }; |