diff options
Diffstat (limited to 'arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts')
| -rw-r--r-- | arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 91 |
1 files changed, 77 insertions, 14 deletions
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts index 7212dc4531e4..9d5a481b309f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "meson-gxm.dtsi" +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "kingnovel,r-box-pro", "amlogic,s912", "amlogic,meson-gxm"; @@ -33,16 +34,22 @@ reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */ }; + spdif_dit: audio-codec-0 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + sound-name-prefix = "DIT"; + }; + leds { compatible = "gpio-leds"; - blue { + led-blue { label = "rbox-pro:blue:on"; gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - red { + led-red { label = "rbox-pro:red:standby"; gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>; default-state = "off"; @@ -90,6 +97,62 @@ clocks = <&wifi32k>; clock-names = "ext_clock"; }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "RBOX-PRO"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-3 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + }; + + dai-link-4 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; + pinctrl-0 = <&spdif_out_h_pins>; + pinctrl-names = "default"; }; ðmac { @@ -101,10 +164,6 @@ /* Select external PHY by default */ phy-handle = <&external_phy>; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - amlogic,tx-delay-ns = <2>; /* External PHY is in RGMII */ @@ -113,9 +172,13 @@ &external_mdio { external_phy: ethernet-phy@0 { - compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22"; + /* Realtek RTL8211F (0x001cc916) */ reg = <0>; max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; }; }; @@ -129,8 +192,6 @@ status = "okay"; pinctrl-0 = <&pwm_e_pins>; pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; }; /* Wireless SDIO Module */ @@ -143,17 +204,20 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; - brcmf: brcmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; }; @@ -167,11 +231,10 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; |